So exciting to watch! I didn't realise you had clients who requested these from your workshop, I need to keep this in mind as I would be very interested indeed :)
Man talk about stepping through a wormhole of altered states. Started out just wanting to build 1 Titanic with Pontos after market parts. Now look at you? Very impressive transition into a major programming project build! Fantastic job bud!!👍🏻👍🏻😎
Thanks! This isn’t a subject that I get excited about either. But the building is fun and it’s leading the way in technology that should make warships VERY interesting to build in the future.
I really love your videos. When i get home from school i cant wait to see them. Thank you for all you do. I was just wondering if you could do the minicraft titanic model it is about 30 in. and compare the accuracy to the trumpeter titanic.
@@TheMidwestModelShop Ok, thanks for maybe doing it. I also know what you mean i tried doing a revell titanic and a corvet at once and it was all so hard to do at once. lol
I've also been monitoring The Model Boat Guy and NIgel. The Model Boat Guy is a little further advanced in his build. The concern I have is with Scale Decks wooden decks. It is my understanding, unlike other wooden decks, is the Scale Decks goes under the bulkheads. Thus adding a little height to each deck height relative to side walls. The Model Boat Guy accounts for this by scratch building the boat deck with thinner styrene than kit provided deck. In theory to bring everything back into alignment. As your build progresses, I would appreciate more details on this subject as you progress. The thought of adding the Boat Deck and A deck sides after the decks are built and installed, might allow for some wiggle room.
That makes sense and I’ve watched some of The Model Boat Guy’s build. My plan was if the bulk head sits on the decks at all, I’m just going to cut away that part of the deck so it sits on the styrene again. But I’ll try to make a point of sharing my experience with this as we progress.
I'm definitely looking forward to seeing you install these photo etched parts on your model. They look extremely nice, and they seem like they're going to be easy to install.
Excellent review Ben. By chance my ibeam set(s) from Woody's turned up today too. I didn't think I would need the superstructure walls as I already have the Scale the Titanic parts but your video looks like it's convincing me otherwise given the height isn't correct. Will be very interested to see how you install these to act as a guide, I'm particularly interested how you fill the gap around the boat deck so these thinner photo-etch sides attach securely and in line. Hopefully the ibeam set helps but I guess we still need to pack the plastic deck with extra material too.
If you're looking at building a Victory at some point I highly suggest waiting for Amati's 1/64 kit. It's still in prototyping at the moment but it's the most accurate and probably the easiest kit thanks to how Chris Watton has designed it. Probably 2-3 years out but will be worth it
@@TheMidwestModelShop no problem! James Hutch over at ModelShipWorld forum is doing the final prototype build for Amati and the pictures for the instruction manual. You can follow along with his build to see it come together. He has started but there's an issue with some parts on Amatis end, plus covid delays. Still from memory he had the framing together on his last update.
Ben, Thanks for the review, I like the idea of al-la-cart, however, there are a lot of modelers who when the model came out purchased either the MK1, Pontos or both, like me. Then came Elixander and yes I purchased his also, China 3D will not purchase; cost and ordering, and now Woodys, which I will probably pick up. The cost of a finished Titanic is going to be well over two thousand dollars US! What are we going to do when some one comes out with a corrected hull kit, whoa get your saw out boys and girls. I am not complaining, goodness knows the modeling community is some what tired of numerous re-pops of the same tank, ship, and airplane. This model is a breath of fresh air, I hope we do not kill it with massive after market parts.
I agree. This kit was unique because of the timing of its release. I know there are a lot of modelers out there who haven’t bought this kit yet, but want to. So it’s really for them. I hear what you’re saying though about all of the time extra options out there. It’s frustrating when you’ve already spent so much. But that’s kind of the nature of this hobby.
I love the Titanic but these sets are way beyond my ability. I wish you all the luck with them and will be looking forward to the continuation of the build. Nice kit but just way to pricey for me.
I have both the Pontos set and the Mk1 design set are the etch from Woody extra or do you get similar parts in the other two sets? just so i know what to purchase
Hi tell me why go to the both of putting all that etching on the inside when your not going to see it. un less some of it goes on the outside. am trying to get all the information I can on this kit before I splash out nearly £400 ??
I don't mind of after market kits, I'm on at 2,000 $ canadian bucks now, with the books suggested by Ben, and the KA kit and the Ebay RC motor kit, plus the RC controller that I bought from a local hobby Shop. And I will surely add the Woody's kit. I'm in for a year to complete this model! G.P. Québec, Canada
You might also want to get that ScaleDecks and the china 3d printed parts like funnels, and other parts of the machineries. You will have a superb and very accurate and detailed, and museum quality model for sure!
Just a wee thought for Woody, while this is still in development: would it not be a good idea to make the sheet numbers match the deck numbers? If that's not practical, make the sheets numbered, rather than lettered, maybe jut a tad less likely to cause confusion, with "deck A on sheet C"etc.
So what do you mean by drilling proper holes? I have a document that shows how Titanic is rigged. I’m just not there yet in the build. But I will cover it.
Your build is fascinating. Really looking forward to seeing the continued process. After your work on the Missouri, I'm a fan!
WOW! what a great set of PE. Not building Titanic at that scale, but will be watching your videos. Should be fun working with Woody on that PE.
So exciting to watch! I didn't realise you had clients who requested these from your workshop, I need to keep this in mind as I would be very interested indeed :)
Fantastic show
Thanks very much again for putting so much effort into your programs.
All the best to both of you, you guys are amazing team
Ben, thanks for the review. Great detail in those parts. Can't wait to see you install them on the model.
Man talk about stepping through a wormhole of altered states. Started out just wanting to build 1 Titanic with Pontos after market parts. Now look at you? Very impressive transition into a major programming project build! Fantastic job bud!!👍🏻👍🏻😎
While the model doesn't interest me as much as others, the techniques you use in construction is fascinating! Thank you for the videos.
Thanks! This isn’t a subject that I get excited about either. But the building is fun and it’s leading the way in technology that should make warships VERY interesting to build in the future.
I really love your videos. When i get home from school i cant wait to see them. Thank you for all you do. I was just wondering if you could do the minicraft titanic model it is about 30 in. and compare the accuracy to the trumpeter titanic.
Thanks Konner. Maybe after the titanic build. When you start several models at once, it makes it difficult to finish any one model.
@@TheMidwestModelShop Ok, thanks for maybe doing it. I also know what you mean i tried doing a revell titanic and a corvet at once and it was all so hard to do at once. lol
Great job Looking forward to the build
I've also been monitoring The Model Boat Guy and NIgel. The Model Boat Guy is a little further advanced in his build. The concern I have is with Scale Decks wooden decks. It is my understanding, unlike other wooden decks, is the Scale Decks goes under the bulkheads. Thus adding a little height to each deck height relative to side walls. The Model Boat Guy accounts for this by scratch building the boat deck with thinner styrene than kit provided deck. In theory to bring everything back into alignment. As your build progresses, I would appreciate more details on this subject as you progress. The thought of adding the Boat Deck and A deck sides after the decks are built and installed, might allow for some wiggle room.
That makes sense and I’ve watched some of The Model Boat Guy’s build. My plan was if the bulk head sits on the decks at all, I’m just going to cut away that part of the deck so it sits on the styrene again. But I’ll try to make a point of sharing my experience with this as we progress.
I'm definitely looking forward to seeing you install these photo etched parts on your model. They look extremely nice, and they seem like they're going to be easy to install.
Thanks Steven! I think they will work out nicely.
Excellent review Ben. By chance my ibeam set(s) from Woody's turned up today too. I didn't think I would need the superstructure walls as I already have the Scale the Titanic parts but your video looks like it's convincing me otherwise given the height isn't correct. Will be very interested to see how you install these to act as a guide, I'm particularly interested how you fill the gap around the boat deck so these thinner photo-etch sides attach securely and in line. Hopefully the ibeam set helps but I guess we still need to pack the plastic deck with extra material too.
Awesome Ben! I gotta get that pe set when I get my kit!
If you're looking at building a Victory at some point I highly suggest waiting for Amati's 1/64 kit. It's still in prototyping at the moment but it's the most accurate and probably the easiest kit thanks to how Chris Watton has designed it. Probably 2-3 years out but will be worth it
That sounds like its worth the wait. Thank you for that info!
@@TheMidwestModelShop no problem! James Hutch over at ModelShipWorld forum is doing the final prototype build for Amati and the pictures for the instruction manual. You can follow along with his build to see it come together. He has started but there's an issue with some parts on Amatis end, plus covid delays. Still from memory he had the framing together on his last update.
Ben, Thanks for the review, I like the idea of al-la-cart, however, there are a lot of modelers who when the model came out purchased either the MK1, Pontos or both, like me. Then came Elixander and yes I purchased his also, China 3D will not purchase; cost and ordering, and now Woodys, which I will probably pick up. The cost of a finished Titanic is going to be well over two thousand dollars US! What are we going to do when some one comes out with a corrected hull kit, whoa get your saw out boys and girls. I am not complaining, goodness knows the modeling community is some what tired of numerous re-pops of the same tank, ship, and airplane. This model is a breath of fresh air, I hope we do not kill it with massive after market parts.
I agree. This kit was unique because of the timing of its release. I know there are a lot of modelers out there who haven’t bought this kit yet, but want to. So it’s really for them. I hear what you’re saying though about all of the time extra options out there. It’s frustrating when you’ve already spent so much. But that’s kind of the nature of this hobby.
I love the Titanic but these sets are way beyond my ability. I wish you all the luck with them and will be looking forward to the continuation of the build. Nice kit but just way to pricey for me.
Love the do not bend on the package. For Australia Post workers that means please bend or roll so it fits on your letterbox... 😢
I have both the Pontos set and the Mk1 design set are the etch from Woody extra or do you get similar parts in the other two sets? just so i know what to purchase
No you won’t get any of Woodys Model Works parts from Pontos or KA.
@@TheMidwestModelShop thank you👍🏻
Hi tell me why go to the both of putting all that etching on the inside when your not going to see it. un less some of it goes on the outside. am trying to get all the information I can on this kit before I splash out nearly £400 ??
Because you can see through the windows.
I don't mind of after market kits, I'm on at 2,000 $ canadian bucks now, with the books suggested by Ben, and the KA kit and the Ebay RC motor kit, plus the RC controller that I bought from a local hobby Shop. And I will surely add the Woody's kit. I'm in for a year to complete this model!
G.P. Québec, Canada
You might also want to get that ScaleDecks and the china 3d printed parts like funnels, and other parts of the machineries. You will have a superb and very accurate and detailed, and museum quality model for sure!
Hi guys! How will you paint chimneys? What colors should I mix?
I’m going to use black on top and Tamiya Buff for the lower part!
Just a wee thought for Woody, while this is still in development: would it not be a good idea to make the sheet numbers match the deck numbers? If that's not practical, make the sheets numbered, rather than lettered, maybe jut a tad less likely to cause confusion, with "deck A on sheet C"etc.
That's a good idea. But really, its hard to mess up the placement of these parts. As far as I can tell, they just won't fit on the wrong deck.
Those are massive . . .
Actually I have a question is there any information you can give on drilling proper holes and digging instructions omit this all together
Rigging I mean
So what do you mean by drilling proper holes? I have a document that shows how Titanic is rigged. I’m just not there yet in the build. But I will cover it.
안녕하세요 제가 한국사람인데 영어를 읽을수가 없어서 그런데요 구매를 어떡해 해야할까요?
Any new passengers?
No. And we’ve stopped requesting them. I don’t know exactly how many we have, but it’s well over 100. Because one person sent us 100 alone!
For jeg tak i delene som han har der .jeg må få tak i detaljer til mln tltanic skala 1/200 . Hilsen Rune Syversen rugdeveien 4 1679 kråkerøy Norway
hi how much do the Etch sheets cost
Go to Woodys Model Works and everything is listed there.
@@TheMidwestModelShop hi I've looked at the photo etching for the Titanic model and they cost as much as the kit