Excellent info. I have a few old birds that I dont fly much anymore and took out some of my old locked spectrum receivers and now a few extra for future builds. Thanks again great info.👍👍👍👍👍
Can i use ar631 reciever out of aeroscout rc plane & use it in any of my Scratch Build rc planes? I only have the DXS Transmitter that came with Aeeoscout. No LCD Screen on it. I basically dont want SAFE on scratc builds. Can I just use USB wire to factory reset laptop & be good to go without any forward programming on DXS?
Over the weekend I was trying to help a friend by resetting his receiver. Three or four tries and loading the latest 'basic' software, I still could not get to the 'first time setup' prompt. Gyro settings were all that I saw. I did message Spektrum but have not received an answer on what I might be doing wrong.
One of the best videos for information on how the process works hats off to you sir spektrum doesn't even come close to your step by step information again excellent video for guys like me I did sub you Thanks
Thanks, there is so much miss information online, and so many people showing and telling stuff that honestly makes no sense so I decided to make my own video, I'm glad it helped
Hi Robert can you tell me is it possible to use the safe on a dx6i transmitter or do you need a transmitter with forward programming. Many thanks Darren
Hi friend! Thank you so much for your videos! I have a question not related to programming. When I plug in my Eflight V900 which has a Ar631, The AR does not beep, but it does bind to the plane, however the motor does not run. Do you have any tips or advice? I am using a Jumper T Lite transmitter... I followed the directions to turn down the throttle and lower the trim to 0.
Well that helped me crack a 2nd hand 631 so many thanks for your time and effort VERY helpful , happy landings Just one thing may be take the prop of the plane when its live it front of you like that oh that made me cringe
Is this required to put the ailerons on 2 separate channels with safe working on both? Or can you just change the aircraft type to 2 ailerons and safe will work too?
Thanks for the vid. I want to reset my as3x 631 rx which I recovered from a crash to be able to use it on a new plane. I am looking for enabling the extra channel. So any way to do that. ? Thx
Hey thanks for your video's there a huge help, one question i have is how do i get a spectrum profile? As I've been trying to reset a handful of receiver's from crashed planes 😂 and I'm not very computer literate. So I'm watching your videos over and over hoping it clicks
First off great video! This is going to be very helpful. Just be careful putting your wrist by the prop when plugging it in. I had a motor start right after plugging it in once. Luckily I didn't get bit.
You can also unlock the rx without having to reset the model thats on it , Then you can go into forward programming on transmitter and make adjustments for Safe and As3x setting
didn't work for my AR6610T. First window that pops up says the receiver has already been registered by someone else. I purchased it through Amazon a couple weeks ago. It also does not bring up forward programming in my DX6e even though they are bound and throttle and servos work.
I asked but received no reply from Spectrum. My laptop has windows 11. I have tried to download the program but it doesn't seem to download. Any suggestions?
I bought a E-Flight Night Radion last week. Been out of RC for decades. I learned a Vario is available and it blew my mind!!! Then, I learned the transmitter I bought was a DX6e. ( I figured rudder, elevator and throttle). While the AR631 sends telemetry data it shows up as text, no audio. ....great way to lose your plane me thinks. So, I bought a used DX8 Gen 2. And I bought an AR637T DSMX 6-Channel AS3X...thinking the stock receiver coming with the Radion doesn't send out Vario data. I'm not sure I heard you right ....but I can send back the $115 receiver and buy a cord and get a Vario sound with stockAE631 coming in my glider? What would you do?
Telemetry is great and stuff but if you just set a timer and land and check voltage ⚡️ you learn real fast battery 🔋 life, you also don't need to unlock the receiver if your flying the plane stock, having audio alerts is cool so updating the radio is a good idea but I would not change anything else
@@Tallguysrc The Vario sound is a higher faster pitch or beeping tone the faster lift takes you up. Conversely, when descending, its more of a sadder power pitch morose tone. Great for glider pilots.
Ok, it's true that the Receiver WILL UNLOCK WITH THE "TX" (Forwarding Program) doing what we can see on this video, but.... WHY DOESN'T IT "UNLOCK" ALSO ON THE "Spektrum PROGRAMMER" ON THE COMPUTER??? I have already asked this question to many people both here in these "RUclips Tutorials" and also to SPEKTRUM's own "Technical Support", and..... NO RESPONSE, FROM ANYONE AT ALL. Weird is not it???
Excellent info. I have a few old birds that I dont fly much anymore and took out some of my old locked spectrum receivers and now a few extra for future builds. Thanks again great info.👍👍👍👍👍
Can i use ar631 reciever out of aeroscout rc plane & use it in any of my Scratch Build rc planes?
I only have the DXS Transmitter that came with Aeeoscout. No LCD Screen on it.
I basically dont want SAFE on scratc builds.
Can I just use USB wire to factory reset laptop & be good to go without any forward programming on DXS?
excellent video very informative and easy to understand
Over the weekend I was trying to help a friend by resetting his receiver. Three or four tries and loading the latest 'basic' software, I still could not get to the 'first time setup' prompt. Gyro settings were all that I saw. I did message Spektrum but have not received an answer on what I might be doing wrong.
Thank you! That made it quick and easy. Everything is now jail broke!
Thank you! Better explanation than the one from Spektrum on their channel!!
Hello thanks for the video. Does this allow the dx8e safe feature to work, which currently it doesn’t? Thanks for anyone replying
One of the best videos for information on how the process works hats off to you sir spektrum doesn't even come close to your step by step information again excellent video for guys like me I did sub you Thanks
Thanks, there is so much miss information online, and so many people showing and telling stuff that honestly makes no sense so I decided to make my own video, I'm glad it helped
Hi Robert can you tell me is it possible to use the safe on a dx6i transmitter or do you need a transmitter with forward programming. Many thanks Darren
8:24 can we reset the receiver using the transmitter. So are we using the cable.
Hi friend! Thank you so much for your videos! I have a question not related to programming. When I plug in my Eflight V900 which has a Ar631, The AR does not beep, but it does bind to the plane, however the motor does not run. Do you have any tips or advice? I am using a Jumper T Lite transmitter... I followed the directions to turn down the throttle and lower the trim to 0.
Very helpful.. Appreciate you doing this... Great tutorial... - Will
Well that helped me crack a 2nd hand 631 so many thanks for your time and effort VERY helpful , happy landings
Just one thing may be take the prop of the plane when its live it front of you like that oh that made me cringe
Thank you for this, I really appreciate it! Helped me get through setting up the Habu with Spoilerons!
You can’t do so without doing this?
Is this required to put the ailerons on 2 separate channels with safe working on both? Or can you just change the aircraft type to 2 ailerons and safe will work too?
I also would like to know the answer for Your question, sure one of the Ailerons will not work ("sabilize), WHY??? Nobody replies'''
Why not just do it, takes 10min, then try safe in your hands see if both ailerons move when inverted,it should try to self level, simple
Well @@patrickhoyle8357 , you see, I would love to try it, but the reprogramming software is only compatible with Windows, and I have a Mac.
I’m getting ailerons on safe with 2 servos, but can’t get them to work out of safe, as3x only…
Thanks for the vid. I want to reset my as3x 631 rx which I recovered from a crash to be able to use it on a new plane. I am looking for enabling the extra channel. So any way to do that. ? Thx
Hey thanks for your video's there a huge help, one question i have is how do i get a spectrum profile? As I've been trying to reset a handful of receiver's from crashed planes 😂 and I'm not very computer literate. So I'm watching your videos over and over hoping it clicks
Thank you Sir! Will do that for Habu SS
First off great video! This is going to be very helpful. Just be careful putting your wrist by the prop when plugging it in. I had a motor start right after plugging it in once. Luckily I didn't get bit.
Yes. Prop should be removed.
Is this the same for the AR636A that came in my Valiant BNF?
You can also unlock the rx without having to reset the model thats on it , Then you can go into forward programming on transmitter and make adjustments for Safe and As3x setting
How do you unlock safe on channel 6 without forward programming receiver?
didn't work for my AR6610T. First window that pops up says the receiver has already been registered by someone else. I purchased it through Amazon a couple weeks ago. It also does not bring up forward programming in my DX6e even though they are bound and throttle and servos work.
Excellent!! Thank You for Sharing!!!
Why is it that You have to use forward programming, what if your radio is the old version DX and you want to use it as NEw RX
hello - is there a way to now reprogram the receiver with a RTF DX6 transmitter? or do you need a transmitter with a screen.
I too want to know. Surely its doable on pc, but then again, I wouldnt put it passed spektrum lol I just want flaperons. 😭
Great video. for next time please consider put the radio closer to the camera or turn off the back light of the screen. Thanks
before you reset , first write down the as3x and save giro settings from the bnf programming on the tx, you can reprogram in your reset receiver
Now you tell mw.
I asked but received no reply from Spectrum. My laptop has windows 11. I have tried to download the program but it doesn't seem to download. Any suggestions?
Resetting receiver & removing the model on it its not the way to go, how do you unlock channel 6 to have safe mode with a pc and a cable?
Did this on aeroscout now for some reason it flys fine but at full trottle it nose dives what gives Nothing has changed
I bought a E-Flight Night Radion last week. Been out of RC for decades. I learned a Vario is available and it blew my mind!!! Then, I learned the transmitter I bought was a DX6e. ( I figured rudder, elevator and throttle). While the AR631 sends telemetry data it shows up as text, no audio. ....great way to lose your plane me thinks. So, I bought a used DX8 Gen 2. And I bought an AR637T DSMX 6-Channel AS3X...thinking the stock receiver coming with the Radion doesn't send out Vario data. I'm not sure I heard you right ....but I can send back the $115 receiver and buy a cord and get a Vario sound with stockAE631 coming in my glider? What would you do?
Telemetry is great and stuff but if you just set a timer and land and check voltage ⚡️ you learn real fast battery 🔋 life, you also don't need to unlock the receiver if your flying the plane stock, having audio alerts is cool so updating the radio is a good idea but I would not change anything else
@@Tallguysrc
Can I get a Vario sound using the stock
AE631 with a DX8 Gen2?
@@Navigator777777 explain Vario sounds
@@Tallguysrc
The Vario sound is a higher faster pitch or beeping tone the faster lift takes you up. Conversely, when descending, its more of a sadder power pitch morose tone.
Great for glider pilots.
I love how you call it jailbreak...
I picked the term up off rcgroups lol years ago
Is it possible to completely disable AS3X and safe?
Yes
Ok, it's true that the Receiver WILL UNLOCK WITH THE "TX" (Forwarding Program) doing what we can see on this video, but.... WHY DOESN'T IT "UNLOCK" ALSO ON THE "Spektrum PROGRAMMER" ON THE COMPUTER??? I have already asked this question to many people both here in these "RUclips Tutorials" and also to SPEKTRUM's own "Technical Support", and..... NO RESPONSE, FROM ANYONE AT ALL. Weird is not it???
Lemon rx, thank me later.
That rx is really a 7ch , the hidden 7ch is for doing reverse thrust
Can't see your display screen it's not very helpful that way