HOW TO MAKE A TRI-DRIVE RC TRUCK Version 2 | HOW TO LOCK DIFFS & A CARSON POISON MOTOR IS FITTED
HTML-код
- Опубликовано: 20 июн 2022
- How to make a tri-drive "Version 2"
How to make a Tri axle "Version 2"
I thought id give you an update on my custom Peterbilt Tri drive Tamiya Grand Hauler King Hauler 1/14 Rc Truck build built from spare leftover parts from my current Grand Hauler build.
In this I show you how to make the tri axle Tri drive and show you the simple way to make your own using a few extra parts which can be sourced quite easily should you not have them lying around, If you watched my first video on ho to make a tamiya tridrive then this video is basically a version 2 of that video and just a simple mirror image of what I did and the results and performance seem to be far greater than the original, ill also show you the simple way on how to lock diffs in the axles and I swap out the stock tamiya 540 motor for a Carson poison truck motor, giving more torque and better low end control so the tug of war challenge is back on between rusty the king hauler and this tri axle.
Anyway all is explained, so sit back with a cuppa and enjoy
Feel free to buy me a coffee.. It all helps the channel.
www.paypal.com/cgi-bin/webscr...
Here is my daughters channel link..
ruclips.net/channel/UCT0F...
Follow me on Instagram..
/ scotty555babe
Follow me on tik tok
/ scotty555babe. .
Like my FB Page..
/ scotty555babe
SUBSCRIBE and never miss out "scotty555babe"
Ribble valley truck club. RVTC. Ribble valley rc club Rc Trucks @ Leyland Leyland Rc Trucks Wedico Trucks scaleART trucks How to
Tamiya trucks Tamiya Scania V8 Wedico Carson Cascadia Volvo Premacon TTM Rigid Rc Verkerk Servonaut Mfu Leyland Rc Construction Rc Hydraulics Rc Trucks scaleART Heavy haulage RC Excavator Remote control trucks Radio control trucks Modelling hobby Model engineering Semi truck Rig Kenworth Mack Peterbilt Custom Rc's Piggytaylorrc.com Model event Axial racing Gpm racing Rock crawling Trailing Scaling
camions de contrôle de radio, AMERICAN TRUCKS, STRETCHED SEMI
Funkfernsteuerung Lkw american truck, custom trucks. american custom semi. kenworth w900 1/14 TAMIYA
Modelbouw Lori Kontrol Minyak
#scotty555babe #Rctruck #tamiya #Customtruck #customgrandhauler #tamiyagrandhauler #customkenworth #peterbilt #custompeterbilt 
Авто/Мото
Looks good ,drives much smoother and controlled.
Thanks mate, it seems way better this way round 👍
Looks great 👍👍 I would suggest, on the rear Axle, drilling a hole between the two for the lower link....
The rear Pinion angle is too low. This isn't critical, but will cause faster dogbone wear over time. 😉
The black paint inside Rusty does make a difference!
The Wheel Arches do look good, but it might be more practical without them. Just my opinion.
The pinion angle was the same the other way around too, it's pretty efficient and the dogbones will only be temporary till I add Universals,
I just thought it would be better performance wise to mirror the setup and have that Lone axle trailing on the rear unlocked 😊
Gettin there slowly bro 👍👍
I think it's a better layout this way performance wise, now it just needs painting really and Mfu installing and a possible winch 😊
@@scotty555babe ye n u could pos make that last axle a lift 1 as well it getin there bro iv got 2 wks to get mine something like rite for nationals bro 😮😲😵
Those motors make a huge difference
It went from stupid to sensible in minutes.. Why they still put those shitty motors in the kit is beyond me, I know companies are out to screw people of their monies but a torquier motor isn't going to do any damage to Tamiyas bank 👌
@@scotty555babe the trucks are well overdue a redesign
🔥💕👍
😊👌👍
Hi there.looks like you been doing them for a while?im doing a 6x4 Scania I’ve filled over the cab screws in side for cab tilt as look shit with screws in.trying think of way for trailer lights wish they made a 5th wheel with little brass plates in it then on trailer has little rounded over pins on small springs so can move up a down as go over in dents in 5th wheel were plates sitting.then would have trail hocked up without the wire.
One that piss me off a I went to Tamiya Uk as only up road.when you paint rear light to how it tells you to the colours are in wrong place a don’t line up with the bulbs.a guy in Tamiya said your right but still had pay for new lenses.
One that really bug me you fit the mfc unit how tells you put then you can’t fit the seats a so on because mfc sits in the way.
I’ve got some 1000mm rails a want to make a 8be 6.does anyone do plans of were need to drill holes someone that has done before like yourself could trace were holes are a then print them of.a could tape in place a dot mark were holes are.
A lot of this new to me know what want but there no help out there on how you do it like the extend gooseneck trailers people built don’t sell plans or parts to build one😬 a no help on where get bits.
I gotta agree with a lot of the things you mention, for the price of these toys when products are improving so fast, you'd really think Tamiya would up their game a little bit, I replace a lot of the bolts for scale bolts with the Hex heads for a socket, to make a template for blank rails you need to clamp your existing rails to the blanks and drill and tap away as for gooseneck and things just takes a lot of research, usually starts with getting plans for a real one then Scaling them down and working from there, or there are companies out there like lesu and rc4wd that make these however be prepared to part out with a month's wage..
Have fun with your trucks pal 😊👌
hello friend thank you very much for the blocking tip edeia fantastic had never thought of this idea. I liked and subscribed some time ago because I like the content of your videos
Thank you, I appreciate it 😊👍
wow your look so great axles, I am bout to build my self USA grand hauler king semi truck with it mean little more longer then grand hauler cuz of 3 axles ram building with new rail Fram to make a new hole spot.. I already build the 1 and 2 truck . now build my self 3 truck sooner.. I am looking around those people who build a 3 rear axles. I am plan to build a 8x8, what that mean is front drive plus rear 3 axles drive . who's my truck gotta be so heavy with a new iron rail Fram tho..
That will be a great build, are you using the lesu front drive/steer axle for the 8x8.. I've always been tempted to put one on my king hauler for a 6x6..
Have fun with your projects 🙂
@@scotty555babe yes I get them all full drive front and rear 3 Alex’s
Morning Scotty! I know another vid is due to show how the locked diffs work in action, but im building mine up today so can you give is the heads up if its better to lock them them in the orientation you have done it? I promise ill still watch the video thats due too LOL
🤣🤣 Hi, yes I locked them this way to specifically reduce scrub on the rear axle and less push when loaded, my king hauler is locked and performs great anywhere, the tri drive when I had it out seems to drive great I just haven't really seen how much steering I have lost if any but that can be sorted with another little steering mod, 👍
But overall in my personal opinion from playing around, this has turned out to be the most efficient way 😊
@@scotty555babe right I’ll build mine the same config then! Cheers chap
@@scotty555babe Also will you be at Nationals?
I usually go to film, but unsure this year 👍