Unpacking / unboxing multi hammer Metabo UHEV 2860-2 QUICK 600713500

Multi hammer with 4 functions: hammer drilling, drilling without impact in two speeds and chiselling
Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
Thumbwheel for preselection of the speed and impact rate
Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
Metabo Marathon-motor with dust protection for long service life
High performance hammer action, precisely mounted in a housing made of aluminium alloy: long-lasting and robust
Perfect ergonomics thanks to the centre of gravity being near the hand and optimised handle contour
Bottom switch protected against damage and dust
Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
Restart protection: prevents unintentional start-up after power supply interruption
Lockable switch for comfortable working in continuous operation
Cable-protecting ball joint for optimal freedom of motion when working
Characteristics
Max. single blow energy (EPTA)3.4 J
Maximum impact rate4500 bpm
Rated input power1100 W
Drill-Ø concrete with hammer drills28 mm / 1 3/32 "
Drill-Ø masonry with core bits68 mm / 2 11/16 "
Drill Ø steel13 / 6 mm // 1/2 / 1/4 "
Drill-Ø soft wood35 / 30 mm // 1 3/8 / 1 3/16 "
No-load speed0 - 900 / 0 - 2100 rpm
Revolutions at rated load900 / 2100 rpm
Bit retainerSDS-plus
Collar diameter50 mm / 1 31/32 "
Weight (without power cable)3.3 kg / 7.4 lbs
Cable length4 m / 13 ft
Vibration
Drilling in metal4.3 m/s²
Uncertainty of measurement K1.5 m/s²
Hammer drilling concrete13.5 m/s²
Uncertainty of measurement K1.5 m/s²
Chiseling7.2 m/s²
Uncertainty of measurement K1.5 m/s²
Noise emission
Sound pressure level90 dB(A)
Sound power level (LwA)99 dB(A)
Uncertainty of measurement K3 dB(A)
Hammer chuck for tools with SDS-plus shank end
Drilling depth guide
Plastic carry case
Keyless chuck for tools with cylindrical shank
rubber-coated side handle

[@robuzytkownik7505]

Thanks. Good film.

[@morenogiovacchini]

Comprato qualche mese fa dopo aver fatto un'ottima esperienza con il modello precedente mi decido ad acquistare il nuovo modello più performante.. invece ne sono rimasto deluso perché oltre a qualche piccolo difetto come nel caso del mandrino che con punte sds se lo usi come scalpellatore il mandrino a contatto con il muro la fa uscire. La delusione maggiore è che se entra terriccio o polvere di rompe l'indotto.. in 3 mese rotti 2 volte. La prima sostituita in garanzia il secondo contestato perdenza garanzia dichiara che non risponde in caso di polvere. Usandolo in cantiere la polvere è una costante. Se avevo letto prima la garanzia non lo avrei comprato, anche perché il vecchio modello l'ho usato per anni allo stesso modo senza mai un problema..

[@Ruben_Ruben__]

Grazie

[@Mihai1174]

il mio ha il mandrino normale che gira storto non in ase ,anche il tuo?

[@Mihai1174]

Il tuo gira dritto il mandrino per le punte normal?i ,sull mio gira storto fuori ase?

[@morenogiovacchini]

@@Mihai1174 con le punte SDS è normale

[@pelmen2019]

А где смазка и свёрла в комплекте?

[@игорьколесников-к2у]

Немой или глухонемой !

[@martint7639]

Hi guys be aware i tried to change the brushes after 2 years of use and very difficult to change brushes it is almost impossible. Piece of s***

[@yashamaru86]

You had 3 years guarantee if you were not aware, by repareing it on your own, you just lost it.

[@Mihai1174]

​@@yashamaru86bigol