We Party so hard till the sun goes down brother 🤣 thanks again for all the help and tips getting this rig completed 🙌🏻👍🏼 hands down one of the best trucks out right now bro 😎 very glad I got 1!!!!!! Always a memorable session when we link up brother Rich🙌🏻🙌🏻🙌🏻
You know it Brother Dave 😜!!!! Had an absolute Blast once again Bro 🤗. So stoked you got your O8s. Great job with the build too. It was running smooth as heck with the Castle 8s and Hobbywing 1100 👌. Bummer on the arm, but we were friggin sending it out there 😱🤣🤣. Loved all the space at that new spot. Perfect area to just hammer it and test everything 😍. Appreciate you letting me open up the XMaxx Bro. She's hauling ass with that setup. Can't wait to hook up again soon. 🍻🤙🤙😎💪👊👊
That's what I call a bashing session. The Typhon looked to blasting fast and the XMaxx was able to keep up 😳 dang. What's better then the Outcast 8S ??? TWO 👍 😘 to you, I hope you and family and friends are doing well 😘
Thanks so much Kimberly 😍. The little Typhon is still my favorite 🤗🥰🥰🥰🥰. Just a squirrely screamer out there in the dead grass 🤣. Dual 08s with Dave was too FUN!!!! Hope you are well too my Basherqueen 😘😘😎💪👊👊
What A KILLER vid bro!!👊Nice to see Big Red back out and shredding! Awesome rips at the lake and air show with Dave!!🚀🚀Both rigs were solid and going big! At least you didn't have any leg shavers!😱😂Cool ending footage! Nothing like a ripping Typhon!! His Xmaxx has some gnarly fans!😂Looks like you guys had a killer time! What it's all about!😎💪🤘🤘🍻
Thanks so much Brother 😜!!!! Felt great to put a true test on the 980kv 😍. The death rock incident cut the first one a tad short 😂. The 34/39 gearing is plenty for going balls out with gobs of torque and wheelspin. She's running better than ever with the diffs dialed too 👍. Dave did a Killer job with his M2C build 😱. So stoked to have a fun dual 08s run at that big spot 🥰🥰. The Typhon and 800kv 1/1 XMaxx were both hauling ass out there 👀. Just a wonderful break in bash for Brother Dave. He's loving the 08s. Still getting his brake dialed with the Castle ESC, but didn't hold back one bit. 🍻🤙🤙😎💪👊👊
Rich thanks to your help did my entire build after your truck since I loved that setup so much our trucks are identical with exception of I have Outcast 39t spur. Waiting on QS8 connectors and Ill let her rip thanks for all your insight and help with build. I mainly fly planes now and was my first build since my Baja in 2010 loved this build!
Dude so cool, one if only cool of our Drought Folsom Lake!! I have been watching and learning.. Today I'll be rocketed into the 4th dimension have my parts my parts comin, motor mounts chassis M2k is Mitch and you my friend!!!!!ON MONDAY I will have the rest of my arms from RPG I was running to aluminium red arms in marshmallow pin pivot I'm going back to the flexible plastic of the with upgrades you showed me and I did not forget the tail mounts You very much fellas I see out fulsome someday I live I n Carmichael I need to get there bad !!
Thanks so much Patrick 🤗. Like most hobbiest, I'm constantly learning new stuff from others and first-hand experience. I try and share helpful tips when I can 😁
Wow rich great video on that outcast EXB 8S. Pretty much is now. I have a 8S EXB outcast love it. I just think the chassis are very weak for some reason. Gonna go with M2c soon my bulks head's striped out in the front since the chassis bent. Bent her back 2 times now very annoying.
Wow Rich 😱 Awesome Basharoo and then it was a Twin Outcast Bashing and Jumping with your bro David 👍shame about his A-rm, them Fans are Loud, need ear puds lol 😆 Awesome speed passes, mind the Cat 🐈 🤣amazing location Rich and Awesome Fun Bashing Video as always Brother 👍🇬🇧🥰🇺🇲👍
Thanks so much Phil 😜. Had a Blast out there Brother!!! Huge congrats on your Kraton 8s 😍. Such a Killer platform. Nothing else out there like it. 🍻😎💪👊👊
What a bash that was there brother Rich. 980kv stretched all out at Folsom lake was just perfect terrain for that big girl!🔥🔥🔥🚀👍 Great double bash with your buddy out there pounding those machines till the breaking point. Minor breaks obviously because of M2C holding all the important stuff in place. That typhon was a land missile 🔥🔥🔥 made that Xmaxx look slow and I KNOW she was not! Saw you running that Xmaxx for a minute👀.... Thing looked to be a beast, too bad it was too dark to get much footage of it. Killer sends and rips bro as always... See ya round
Thanks so much Brother Dennis 🤗. This was a great test for the 980 set-up 😍. Folsom Lake had a mix of flat and deep/rough sand and lots of driftwood and rocks to dodge 😱🤣🤣. Awesome spot to go balls out and see her potential. Definitely minor breakages out with David 😁. Bummer about his A arm, but stuffs gonna happen. M2C makes such a huge difference keeping the core rock solid 😍. The Typhon truly is a land missile 😱🥰🥰. Max8 combo and MX buggy tires are the sweet spot. Really appreciate it Brother!!!! 🍻👍👍😎💪👊👊
Wow! That looked like an awesome evening 👍 seeing both the O8S out there at the same time hitting the ramps and doing doubles was epic! 😱 your Typhon was ripping around really well too 👍👍
Thanks so much Brother Aaron 😜. It was Epic watching Dave do a proper break in with his 08s 😱. He was feeling out his braking...etc...but was genuinely impressed with it. Completely different from driving his full beefcake 800kv XMaxx. The Typhon is just Ballistic once the tires get enough bite 😱🤣🤣😎💪👊👊
OOOOO YES Brother, Great RICH you and your friend really put on a show 😎😎💪 the outcast is really a beast, it's finally back, I remember the last time with that bad accident 😱😱. I love 1/5 Backflips, they look really cool, can't wait to try, for now I bought the Proline Trencher 1/5, they look really sturdy. That buggy was really a ground to air rocket hahaha. Nice video Bro as always 🤗😜😁👍👍
Thanks so much David 😜. So nice to have Big Red back 😍. She's feeling better than ever since the rebuild 👍. Had a Blast with Dave and his new 08s 😱🤣🤣. The 8s Backflips are fantastic. Great traction and not too Crazy heavy. The Typhon 6s is a little cruise missile 👀🤙🤙😎💪👊👊
Really Sick ComeBack With That Outcast.That Thing Is A Real Beast.Great Job Man.And That Sesion With Dave Was Awsome.I Thought His Max Was Gonna Take Off. Two OUTCAST Cant Beat That.Cant Wait For The Next Vid.Nicely Done Guys.
Thanks so very much Javier 🤗. Felt like a redemption bash after the death rock 😱🤣🤣. So awesome to have her back dialed and get such a Killer fun session in with my brother David!!!! 🍻🤙🤙😎💪👊👊
Thanks Trent 🤗. Yeah it's looking more like a pond right now 🤣. The boat ramps are all closed. I'm taking advantage of the open terrain in the meanwhile. 🍻😎💪👊👊
Thanks so much Brother 🤗. That death rock hit did a serious number on her grill 😱. Definitely lost a few teeth 😂. Felt awesome to get her shaped up and really test the 980kv 34/39 set-up 😍👍👍😎💪👊👊
Just an epic piece of footage/content! Love it, brother. Out there with your day one-road dog running like a bunch of beasts! Best in the business buddy! Have a good day! 🤝🏎💪🤙🏽💪🏎🤝🤝🤝
Awesome lakeside rips to start the wicked session with David Rich. Twin O8s looks amazing under the bright sun 🌞 brother. Glad to see her back out after that brutal Rock hit. She absolutely hauls with your gearing setup bro. Wicked launches off the ramp and nailed those DB with some smooth timely landings beautifully. Props to the wizard's incredible upgrades, it undeniably takes this rigs to whole new levels. What was David's Xmaxx smocking?! Thing was loud AF 🤣. What an absolute Fun session brother. Stay safe and bash on brother.
Thanks so much Brother Chris 😜. Had a Blast at both spots 😍. Felt Killer to test the 980 set-up again, this time with plenty of space 😱🥰🥰. David is running the Hobbywing 800kv combo trying 1/1 gearing in his XMaxx 👀. It's an animal with the big Badlands on there. Definitely makes some noise 🤣🤣. He's absolutely digging his new O8s Bro. Totally different from his X of course. I gotta hand it to him for letting her fly the first bash. We got a late start, but stoked we made use of the sunlight 🤗. Sucks the days are so short now 😂🤙🤙😎💪👊👊
@@andybcardoso1978 yes indeed 👍. I pinned his comment at the top 🤗. Dave recently got a new camera and did a build overview and bash with his 08s. 🍻😎💪👊👊
I just got my arrma kratton 6s v5 yesterday and even on 4s completely stock seems like a beast. I can imagine 6s. But this thing is absolute f*****n ANIMAL bro. Nice run!
is there anyway to keep rocks and pebbles out from the drive shafts? I keep getting rocks getting bound up under the tbars and one even slightly bent a bar and it doesn't spin evenly. I guess I could rig up some kinda bud gaurd possibly. cool video!
Pretty sure Tbone and others sell mudguards. Those should definitely help keep rocks from jamming up quite as frequently. 😎💪👊👊tboneracing.net/products/tbr-rear-mud
Man glad to see you bashing again brother how you like the new v5 line up hate the talion didn't make it.when is the 7or6 scale typhoon coming,🤔🤔🤔,🙏🙏😇😇🤔
Thanks so much Dhon 😜. I think ARRMA did well with the V5's 👍. Just tossing the plastic turd STX2 was HUGE 😂. The new Spectrum electronics are actually very nice. Next year's Talion should be a home run 👀. I'm crossing my fingers on more big scale hits too 😍😎💪👊👊
IMO, you have the best bashing videos on RUclips, keep them coming, I really enjoy watching your video! I want to get an Arrma for bashing too after watching your videos, do u recommend the Granite or the Big Rock? Or should I wait for the 4S Kraton coming out next year?
Thanks so much Alan 🤗. Really appreciate the kind words. I would probably pick the new Big Rock over the Granite. ARRMA widened the stance (among other things) and it's much easier to get the power down with the longer, more stable chassis 👍. The Granite is Fantastic at the skateparks with it's ability to turn on a dime 😍. Not sure I'd wait for next year's releases. There's no wrong choice regardless. 🍻😎💪👊👊
Rich you are the Rc king love the content bother ...... Couple of questions for you is the 980kv good for top end and if so can it be done with a stock spur gear and just going up on the pinion gear?? Thanks rich
Thanks so much Brother 👊. The 980 is a powerhouse. Great top end. You could gear tall and get good results. Which pinion to opt for, I'm not certain with the stock 47T spur. I'd opt for the direct fit 8s 39T spur gear ARRMA now offers, personally. My setup using the Limitless 39T spool gear works great too, just requires use of 2 grub screws. I think they copied me 😂. It allows you to achieve perfect gearing without a gigantic pinion. 🍻😎💪👊👊
Great vid! I’m in the Roseville area. Question, where is the second spot you are bashing at? Want to take my kraton 8s out where there is enough room to let it rip. Thanks keep up the great vids
We were at the Laurel Ruff education center off of Hemlock. There's a baseball backstop with an entrance to this area. Just watch for people walking their dogs out there. 🍻😎💪👊👊
Just absolutely sick footage as always Rich!! Poor Folsom looks drained! Shout out from Elk Grove!! I don't know if you know this, but in Elk Grove they have a BMX Park with some super vertical jumps I think you would really enjoy bashing. I was just out there yesterday with the Arrma Outcast 6s. I know I've seen you at Elkhorn BMX and what looks like Roseville BMX (not sure if that's still there). But yeah big big jumps in EG and it's a nice little park with a lake with fishing. It's a nice little place IMO. P.S. I watched that death rock hit like 50x times. Jesus that was a hard hit. I think that tops anything Kevin Talbot has done!! (Death rock impact) Insane air for 1/5 scale! Rich Duperbash the LEGEND!!
@@kieranb1275The world record jump? Yeah thats some insane air!! He also had the jump at the skate park that snapped the chassis in half of a kraton I think? But that hit on the death rock... Listen to the audio that thing hit so hard my v1 arrma felt it
@@cloane85 thanks so much Carson 🤗. I LOVE EG bike park 😍. Been there a bunch. It's packed a bit tight now with rhythm sections compared to 2 years ago, but still Fantastic 🥰. Just tough to find it empty since Covid and distance learning....etc. Roseville's Oak Creek BMX is off limits unfortunately. They'll call the cops 100% 😝. Hopefully, we'll see a dedicated public bash park in the region someday. Catch up with you out there sometime Brother 🍻🤙🤙😎💪👊👊
@@richduperbash2966 Yes you are correct with covid restrictions there are lots of people there. A dedicated bash park would be insane. I would pay to use. We're still lucky to have what we got though. Some people have nothing decent. See you out there bash brother. Bash Brother shirt? I'll buy!! Lol
I just picked up a new outcast 8s... and recommendations on what to do immediately? I’m looking at diff fluids and changing to the 23t pinion but not sure if the stock electronics will hold up under hard bashing with that gearing. Thanks as always Rich
Congrats Justin 😱!!!! The O8s can take that 23T all day long. The electronics are super efficient 👍. I ran 23T since the first run and even ran 23/39 gearing with the stock system 👀. I recommend 1 million cst front and 500k rear diffs. Putting 50/50 Silicone earplug and 20mil cst center works Fantastic 😍👍👍😎💪👊👊
Excellent as usual. Glad to see her back in Action. Did you have any issues with your packs? Are you running an arrma 39t spur or the infection one with grub?
Thanks so much Brother 👊. Felt great to have her rebuilt and back running better than ever after the boulder smash 😝. I'm still running my Limitless 39T mod. Good to see ARRMA begin to offer a direct fit option though. Just what this platform needed for lower kv, higher torque motors especially. No issues with my Lipos. 🍻😎💪👊👊
Was wondering what kind of run time you are getting with esc, motor, and gearing set up I’m considering doing the same thing to my outcast 8s keep make these great videos love watching
I'm getting about 20+ minutes or so running Zeee 7200mah 80c 4s hardpacks. Just depends on how hard I'm digging into the throttle. Thanks Brother 🍻😎💪👊👊
Nice. I'm about to go test my Outcast 8s with the XLX2 and 800kv motor 39/39 gearing. So the stock tires are taking that abuse well bud? My duratrax lockup x 24mm belted tires keep coming unglued with my max 5 1100kv motor 25/35 gearing on my xmaxx. I'll try the Outcast 8s tires on it. Hehe. That was tons of fun!
Thanks so much Brother 👊. Your O8s is gonna Rip 😱. I'd stick with a linear throttle curve with the Castle and go easy with the trigger 👍. Hopefully they'll sort out the bad units. Seen several turd out already 🤔. The O8s Backflips are super impressive 😱. Just make sure and vent them. Same with the belted Duratrax. I've had to reglue mine a few times. Scoring the beads and rims with sand paper and using AKA premium glue has been working for me. Looking forward to hearing feedback about your set-up 😱👍👍😎💪👊👊
@@richduperbash2966 Yeah it's a brand new product (the XLX2), but sometimes I take my chances like I did with the O8S, Kaiju 6s and now the XLX2 🤣. Thanks for the tips. I let my 4yr and a half old son drive it today, so it was at only 20% power. Hehe.
@@richduperbash2966 I don't know Rich but I honestly think that my X-Maxx running the hobbywing max 5 and 1100kv motor with 25/35 gearing feels and looks so much more explosive. Maybe it's the gearing? Running 39/39 on the O8S and one of my O8S tires came unglued. That's why I'm using the 4.3 badlands on the xmaxx. Or maybe it's that 1100kv motor on the xmaxx and way less weight? Hehe. I mean, the O8S is not slow at all. I just feel that the xmaxx gets up to speed much faster. Maybe because I'm using 1.5 mod gears on the xmaxx? Hehe. I might try that 1100kv motor from castle once I find it.
@@joseCalderon1976 the weight savings of the XMaxx makes it more agile off the line, but the Outcast completely hauls ass when you can keep the nose down 🤣. The gearing and setup (and Lipos) makes all the difference. 800-1100kv is a great range. The 1100kv winds up wonderfully for top speeds. I always try to gear for about 55-60mph with good torque, usable power, and reasonable temps. That's plenty fast for bashing, especially for these big heavy rigs 😱.
@@richduperbash2966 I know right? Since I accelerate and stop pretty quickly I don't notice how fast the O8S really is. Unlike you that goes like a mile away 🤣. Honestly the stock system did very well but I do appreciate the extra torque and speed of the XLX2 and 800kv motor. More control in the air and more insane speed 🤣.
Shes back 🤘🍻 thats awesome man glad to see her back to good health.im loving my O8S my only problem im having is my body i burst a mount through on her 3rd run lol whoops. How did you like using half ear plugs in the center? Did it help alot? Ive gottavtry something to lower the front ballooning so much.she looks great and some great sends.looked like that was a blast. Thanks for another great video man 🍻
Thanks Nick 🤗. Great to have Big Red back rippin it up 😍. Bummer on your body. Definitely get some shoe goo and drywall tape on her. I used about 3 containers on mine and it's payed off. The body holes got a tad tweaked with the death rock smash, but no cracks anywhere 👀. The silicone ear plug/20mil cst mix definitely makes a difference. Same thing I did with my K8s. Vent the tires too if you haven't already. Happy bashing Brother 🍻😎💪👊👊
Thanks Brother 🤗. Absolutely LOVE this big Beast 😍. Those ramps were from Discountramps.com. Think they stopped making them unfortunately. Been listed as backordered for over a year. 😎💪👊👊
Great video man!!! Loved the shot of the 2 in the air after they hit the ramp. Just amazes me how them big heavy rigs can take such a beat down!!! And question what are them ramps u where useing? Thanks stay safe bro 🤙🤙🤙
Thanks so much Jordan 🤗. Had a Blast at that new spot David found. I bought the ramps from Discountramps.com a couple years back. Haven't seen them online in awhile unfortunately 😝. They work great on mounds and hills if you stake them down. Hopefully they're still available somewhere. 🍻😎💪👊👊
Yea that super cool that u got buddy's that enjoy the hobby. I am yet to find anyone to bash with☹️. But yea I was looking all last night for some like that. I know I ordered a set off Amazon the green and black ones. They don't have a kicker to them so I get know air. But thanks for the reply and info. I'll have check there. Stay safe and looking forward to the next video 🤙🤙🤙🤙🤙
@@richduperbash2966 Hey Rich, what batteries do you run in your Typhon? Specifically I mean do you run a single 6s or 2 3s? My 2 3s spektrums wont fit so I'm trying to see what everyone is doing.
@@dougk4071 I'm running Hobbystar 6s 5000mah 100C single hardpacks from RCJuice. I always cut off the loop connector and solder on a single EC5 off the ESC. Fits like a glove. Also always put a strip of yoga mat at the base of the battery tray for some shock absorption. 🍻
I really love them both Frank 🤗. They're to different too compare. The EXB is a must have in my book though 😍. It's the perfect size for all around high speed bashing. The O8s is better on gnarly big terrain and it's own rush though. More work and expense, but worth it in my opinion. 🍻😎💪👊👊
@@richduperbash2966 thanks for the reply Rich. I’m going to purchase the outcast 8s for my pick of the big scales. I’m waiting on delivery of the notorious 6s in flat black today just to see how I like it. Fist time with a Arrma so I figured I’d start small first. Loving ALL your videos as I’m a new subscriber. 👊🏼👍🏼
Thanks Brother 🤗. I'm using the standard 8mm slide. Not the big pinion one. I'll try and link it up. 😎💪👊👊m2cracing.net/arrma-kraton-8s/444-m2c-3253-arrma-kraton-8-s-8mm-shaft-size-motor-mount-slide.html
Just copied your setup Rick gonna order Beefcake kit which motor mount is correct low or high kv? Sweet truck love your vids keep em coming Thanks Josh!
Thanks so much Josh 🤗. Believe I've always used the high kv slider because I run smaller spur gears, either 34 or 39T. The issue with the large pinion/low kv setup is it was designed when ARRMA only had the stock 47T spur. When I wanted to run 34/34 gearing with my 840kv Hobbystar, I found I couldn't get the slide in far enough to mesh the gears. With the high kv I haven't had any issues with any of my gearing setups. 🍻😎💪👊👊 m2cracing.net/shop/shop.php#!/M2C-3253-ARRMA-KRATON-8-S-8MM-SHAFT-SIZE-MOTOR-MOUNT-SLIDE/p/478044534/category=136127903
Hi - what brand dual ramps are you using in the beginning and end of the video? I am looking for something light an portable. I built a great wooden ramp but it is too big and heavy to transport Thank you!
Rich I have a quick question for you about the hobbystar 980kv max5 combo your running. Did you just solder new 6.5 bullet connectors on the motor leads to make it work with the max5 and if so any issues at all with it. Don’t really want to get an XLX2 because of all the fire issues plus I’m a hobbywing guy. Thanks for any advise you give me love your videos
So sorry I missed your question Clayton 👀. Yes I melt off the 8mm Hobbystar connectors with my butane torch and solder on 6.5mm to fit the Hobbywing. When the XLX works right it's great from what I hear. That said, Castle (like Traxxas) is generally overpriced for what you get in my opinion. The Max5 has worked very well and been very reliable for me personally. 🍻😎💪👊👊
My mini temp gun crapped out and I forgot my backup. Motor felt pretty hot after running hard in the sand. ESC was probably 130's. Sorry I didn't get numbers. 😎💪👊👊
Rich, Do you get any low throttle clogging with the 34/39 gearing. I’m getting a little more than I’m happy with running that combo. I was wondering if you stuck with that gearing, or went down on the pinion. Also, I snapped a 7mm M2C shock shaft just doing some light bashing!!! I know they will take care of it, but I wish there was a solution to the weak link in this truck with the shocks. Any input on your suspension set up would also be appreciated. Thanks for all the videos!!
Hey Jason 🤗. I originally did have some cogging with 34/39 980kv in my Kraton, but later realized I had a connector going bad as it unsoldered towards the end of the run. Really didn't have cogging at all in my Outcast with the stock size wheels. I do think 32/39 is better for any beefier wheels especially 👍. This system got borrowed into my K8s EXB and 32/39 worked Killer with the bigger style Copperhead 2's. Unfortunately, my 980kv took damage during my earlier "Death Rock" incident and the endbell eventually stripped out completely along with a very stretched out wire harness. That sucks you broke a 7mm shaft 👀. That would normally take considerable force. I still think running softer suspension with 35 weight front and 30 rear is a good mix with the M2C pistons. Make sure not to overfill your shocks when running the stock caps and bladders. I usually leave around 3/8" from the top before bleeding them and tightening the caps. Hopefully we'll see an M2C bladderless set-up soon. 🍻😎💪👊👊
@@richduperbash2966 Thanks for the reply. I’ll double check my solder joints and connections. Also good input on shock oil. I think I was running 50. I’ll drop down a bit once I rebuild the shocks. I know Mitch will take care of the busted part. It must have just been a weak one from the start, because it really saw no abuse. Thanks again!
@@richduperbash2966 Do you like the HW1100 motor or the HS980 better? I have an 8s outcast to put a motor in and was curious. So far, the 980 is great, but just wanted your input on the HW1100
Great video, just wondering if putting heavier diff oil in my front diff will help with my wheels ballooning and tyres coming off my rim's, just got standard in all diffs at the moment and just put a 1100kv hobbywing motor in with a 30 t pinion but haven't tried it out yet so don't know if it will be even worse on the tyres, if not might try some badlands mx43, what do you think always appreciate your input, take care gaz 😉✌
Heavier oil helps with ballooning, if you put it in the center diff instead. Heavy oil in front/rear diffs might help in turns, but generally you only need it in the center diff.
@@sampuhhupmas5666 got 20 million in the centre so apart from mix of silicone plugs and silicone oil, maybe new tyres and wheels as mine came off the rim and now they come off even if u use the strongest of glues, thanks gaz
@@gaviscon4304 the heavy fluid/silicone ear plug definitely helps big-time 👀. Make sure to vent your tires with 3/16" holes and tape up the rim holes. 1 mil cst front controls diffing out while cornering which helps from blowing tires up. Same with 500k rear. 🍻😎💪👊👊
@@richduperbash2966 thanks for the reply got the tyres vented, might have to try changing my diff oil have u used proline mx43 s on your kraton or outcast 8s as wanted to know what there like thanks again stay safe, and your always so helpful gav 👍✌
@@gaviscon4304 I have ran belted (and vented) Duratrax Six Packs X's and Lockups. Haven't tried the MX43's due to weight mostly. The Duratrax already add about 1.5lbs 👀. Heavy wheels take away agility, contribute to breakages, and add strain to driveshafts and electronics/gears. Some guys love them. Heavy wheels just aren't for me. 👍
David is running a Castle 8s ESC with Hobbywing 5687 1100kv motor and 34/47 gearing I think 🤔. It's super smooth and plenty fast 👀. Doesn't have the raw brute torque of my Hobbystar 980 56112 34/39 set-up, but he seems happy with it. I also ran that motor in my Kraton and M2C Crusher 8s SWB. Haven't tried the Castle 8s ESC myself. 🍻😎💪👊👊
Just saw that Josh 🤗. That's great Brother 👊. Looks just like the stocker but smaller. This is a prime example of ARRMA watching and listening to what basher's are doing to improve their rigs. 🍻😎💪👊👊
Hey. I am running HS 980kv with HW max5. 39/31. With PH batteries and my ec5 connectors are getting xtremly hot. How can I solve it? I do not see you having that issue.
I'm not familiar with PH lipos. Could be a bad solder joint causing resistance, that's my best guess. What are the battery specs and are you getting specific numbers on the temps with an infrared temp gun 🤔
hi rich I'm always watching great videos.😎 5 scale outcast is really powerful 🤛👊🤜 I saw really cool video 🤩 What about shock oil? Is it 40w (500cst) as it was? Or did you do something higher? My outcast sometimes breaks the shock end after jumping. I am 575cst Show me a little more 5 scale outcast video next time😎👍👊
Thanks much Brother 👊!!! I'm running 30-35 weight with Mitch's M2C Racing pistons and hardened shock shafts. Same weight I use with the stock set-up. 😎💪👊👊
I think I set her to max punch 5 and turned the brake up slightly. The Max 5 has Killer power delivery even at stock punch 3. The 980 56112 Hobbystar is a workhorse 👀😎💪👊👊
Hey Rich I know this is an old video but can you explain why you have 1 miilion cst in the front and 500k cst in the rear? Im in the process of doin my diff fluids and was wondering why it wouldn’t be 1 million in the rear and maybe 500 k cst in the front? Don’t you want it more loose and flexible in the front? Love all your videos as always you’ve taught me alot
Hey Brother 🤗. Most race rigs use heavier fluid in front (than rear) for better handling and overall control. I've found the same principal applies with bashers. The turning, drifting, and power delivery works best with more rear diff action. Makes the rig more predictable. You're also less likely to blow tires when going a bit heavier. Feel free to experiment, but using heavier front fluids (compared to rear) works nicely. 😎💪👊👊
@@darksunridah you bet Brother 👊. Here's a link to a good summation from EuroRC. I tend to agree with most all of it, except I run heavier weights in my bashers than what they suggest. www.eurorc.com/page/149/differential-oil-recommendations
How are you temps? I have the exb kraton 8s and was thinking about running 32 /39 on the hobby star 980kv with a xmax heat sink. I don't like fans they break to easy from hard non stop bashing.
Hey Nick 🤗. My temps have been just fine running 32/39 with the 980kv 👍. Probably 150's tops on average. That's actually my goal temp with most all of my set-ups for maximum performance and efficiency. I don't like fans on my bashers either. They just can't take the pounding. 🍻😎💪👊👊
Hey rich! I’m looking at buying the 8s outcast exb roller. Not sure what motor to get. Speed is fun but also like torque and bashing. Should I go with the 800 or 1100?
I'd recommend the Hobbystar 56112 980kv paired with a Max5. 32/39 gearing for heavier wheels. You can run 34/39 with the original 8s Backflips no problem. The 800kv is better suited for the Kraton. 1100kv 5687 can work, but the 980kv is hands down the best set-up I've ever run on the O8s. Just realize the Hobbystar motors come with 8mm connectors. You have to solder on 6.5 to fit the Max5.🍻
Hey rich! I got that set up and it’s great, tons of fun. I noticed tho sometimes the throttle dies out in the beginning. Kind of like bogging, not good for jumping. Could it be my lunch is too low? Or I’m running a sensor esc without sensors motor? I got the new max 5g2 and it’s sensored
lol, I made the ExACT same "O0ooH!" perfectly syncronized! It was like watching someone hit their nU*Ts on a log hehe, big F.. Much respect ;) Nice bash also, both those cars are BEASTS! :D
Thanks so much Brother 😜. That impact was so Brutal in person 👀. I knew instantly there was serious damage and she was done. Still amazed my electronics, arms, links, shocks, body, and packs survived 😱. The nose of my M2C chassis tagged the nose of that boulder just right 😂. Great to have her back out dialed with Dave and his new Beast 🍻🤙🤙😎💪👊👊
That's tough to answer because both are very durable, but can have breakages too of course 🤔. The Outcast definitely has better gears/diffs and handles better. The XMaxx is noticably lighter though and that helps overall durability, especially when you screw up badly 😱🤣🤣. They're designed so differently 🤔. Both benefit greatly from strength upgrades. 😎💪👊👊
That's my V2 Typhon 6s fully loaded with M2C Goliath Series chassis, towers, braces, suspension mounts....etc. She's a little Tank Ripper 😍. Running the Max8 2200 combo with an 18T. Toughest/fastest RC I've ever owned . 🍻😎💪👊👊
Front and rear are correct 👍. Center is 50/50 mix of 20mil cst (Gravity RC ) and Silicone earplug. 😎💪👊👊www.teamgravityrc.com/online-store/Pure-Silicone-diff-Putty-20-000-000-cst-20Million-p56979859
This is how you bash like how do you get your cars to go that high like not even Kevin talbolt can get it that high !also you Kevin talbolt and v2 vids should be in a jump competition either you post one of you biggest jumps or make one and then see who jumps and looks the highest or you guys could meet together and do it plz do it !!!
Looks quite overpriced for a 1/10 Brother 😱. Seems to have good specs, but not my cup of tea really. I like being able to corner at speed without tumbling. I'll give them props for MT realism though 👍😎💪👊👊
@@richduperbash2966 ya it is expensive, I think I will save my money and get an on road kit , been racing on road alot. The Vintage Trans Am class is a blast , still bash my Teknos tho 👍😁
@@richduperbash2966 hey Rich what wheels/tires do you recommend for my Tekno EB 48.3? I'm making it into a basher , and do you raise the ride height or change the setup on the suspension blocks ? Thanks
@@midwestboss8808 I would try running Proline MX28's with 17mm hex. My buddy Gary from Killer off-road Hobbyz had them on his EB48.3 and it friggin ripped 😱. No changes needed on the suspension. 🍻
@@richduperbash2966 awesome thank you! Last thing I was wondering , what diff oil weight you recommend? , I'm running 6s , and what shock oil weight I should use ? Thanks Rich. Your a legend!
I mean it's cool and all but why spend all that money on the truck when you're going to just put your own electronics in it I that's Got to of cost you
Nothing wrong with the stock system. Mine just has WAY more torque and raw power 😍. I don't mind modifying or spending to make rigs how I want them. 🍻😎💪👊👊
We Party so hard till the sun goes down brother 🤣 thanks again for all the help and tips getting this rig completed 🙌🏻👍🏼 hands down one of the best trucks out right now bro 😎 very glad I got 1!!!!!! Always a memorable session when we link up brother Rich🙌🏻🙌🏻🙌🏻
You know it Brother Dave 😜!!!! Had an absolute Blast once again Bro 🤗. So stoked you got your O8s. Great job with the build too. It was running smooth as heck with the Castle 8s and Hobbywing 1100 👌. Bummer on the arm, but we were friggin sending it out there 😱🤣🤣. Loved all the space at that new spot. Perfect area to just hammer it and test everything 😍. Appreciate you letting me open up the XMaxx Bro. She's hauling ass with that setup. Can't wait to hook up again soon. 🍻🤙🤙😎💪👊👊
That's what I call a bashing session. The Typhon looked to blasting fast and the XMaxx was able to keep up 😳 dang.
What's better then the Outcast 8S ??? TWO 👍 😘 to you, I hope you and family and friends are doing well 😘
Thanks so much Kimberly 😍. The little Typhon is still my favorite 🤗🥰🥰🥰🥰. Just a squirrely screamer out there in the dead grass 🤣. Dual 08s with Dave was too FUN!!!! Hope you are well too my Basherqueen 😘😘😎💪👊👊
What A KILLER vid bro!!👊Nice to see Big Red back out and shredding! Awesome rips at the lake and air show with Dave!!🚀🚀Both rigs were solid and going big! At least you didn't have any leg shavers!😱😂Cool ending footage! Nothing like a ripping Typhon!! His Xmaxx has some gnarly fans!😂Looks like you guys had a killer time! What it's all about!😎💪🤘🤘🍻
Thanks so much Brother 😜!!!! Felt great to put a true test on the 980kv 😍. The death rock incident cut the first one a tad short 😂. The 34/39 gearing is plenty for going balls out with gobs of torque and wheelspin. She's running better than ever with the diffs dialed too 👍. Dave did a Killer job with his M2C build 😱. So stoked to have a fun dual 08s run at that big spot 🥰🥰. The Typhon and 800kv 1/1 XMaxx were both hauling ass out there 👀. Just a wonderful break in bash for Brother Dave. He's loving the 08s. Still getting his brake dialed with the Castle ESC, but didn't hold back one bit. 🍻🤙🤙😎💪👊👊
Rich thanks to your help did my entire build after your truck since I loved that setup so much our trucks are identical with exception of I have Outcast 39t spur. Waiting on QS8 connectors and Ill let her rip thanks for all your insight and help with build. I mainly fly planes now and was my first build since my Baja in 2010 loved this build!
So awesome to hear Joshua 😜!!! Enjoy your new Beast Brother. 🍻😎💪👊👊
Rich, your videos inspired me to get an arrma outcast 8s! This hobby is awesome and it keeps me sane at home. Thanks!
Dude so cool, one if only cool of our Drought Folsom Lake!! I have been watching and learning.. Today I'll be rocketed into the 4th dimension have my parts my parts comin, motor mounts chassis M2k is Mitch and you my friend!!!!!ON MONDAY I will have the rest of my arms from RPG I was running to aluminium red arms in marshmallow pin pivot I'm going back to the flexible plastic of the with upgrades you showed me and I did not forget the tail mounts You very much fellas I see out fulsome someday I live I n Carmichael I need to get there bad !!
Rich you are the all-time greatest RC enthusiast you have the best content and you know so much props to you brother!!!!!!!!!
Thanks so much Patrick 🤗. Like most hobbiest, I'm constantly learning new stuff from others and first-hand experience. I try and share helpful tips when I can 😁
Wow rich great video on that outcast EXB 8S. Pretty much is now. I have a 8S EXB outcast love it. I just think the chassis are very weak for some reason. Gonna go with M2c soon my bulks head's striped out in the front since the chassis bent. Bent her back 2 times now very annoying.
Wow Rich 😱 Awesome Basharoo and then it was a Twin Outcast Bashing and Jumping with your bro David 👍shame about his A-rm, them Fans are Loud, need ear puds lol 😆 Awesome speed passes, mind the Cat 🐈 🤣amazing location Rich and Awesome Fun Bashing Video as always Brother 👍🇬🇧🥰🇺🇲👍
awesome.. looked like you guys had alot of fun. Just bought a kraton8s myself..
Thanks so much Phil 😜. Had a Blast out there Brother!!! Huge congrats on your Kraton 8s 😍. Such a Killer platform. Nothing else out there like it. 🍻😎💪👊👊
Sweet freakin rip on that beast such a great spot out there very nice happy bashing my friend👍🤙😎😛🤪😜👊✌
Thanks so much Brother Chris 😜!!!! Both spots were a Blast for hitting speeds and fat roosts 😍. Really appreciate it Bro. 🍻🤙🤙😎💪👊👊
What a bash that was there brother Rich. 980kv stretched all out at Folsom lake was just perfect terrain for that big girl!🔥🔥🔥🚀👍
Great double bash with your buddy out there pounding those machines till the breaking point. Minor breaks obviously because of M2C holding all the important stuff in place.
That typhon was a land missile 🔥🔥🔥 made that Xmaxx look slow and I KNOW she was not! Saw you running that Xmaxx for a minute👀.... Thing looked to be a beast, too bad it was too dark to get much footage of it.
Killer sends and rips bro as always... See ya round
Thanks so much Brother Dennis 🤗. This was a great test for the 980 set-up 😍. Folsom Lake had a mix of flat and deep/rough sand and lots of driftwood and rocks to dodge 😱🤣🤣. Awesome spot to go balls out and see her potential. Definitely minor breakages out with David 😁. Bummer about his A arm, but stuffs gonna happen. M2C makes such a huge difference keeping the core rock solid 😍. The Typhon truly is a land missile 😱🥰🥰. Max8 combo and MX buggy tires are the sweet spot. Really appreciate it Brother!!!! 🍻👍👍😎💪👊👊
Wow! That looked like an awesome evening 👍 seeing both the O8S out there at the same time hitting the ramps and doing doubles was epic! 😱 your Typhon was ripping around really well too 👍👍
Thanks so much Brother Aaron 😜. It was Epic watching Dave do a proper break in with his 08s 😱. He was feeling out his braking...etc...but was genuinely impressed with it. Completely different from driving his full beefcake 800kv XMaxx. The Typhon is just Ballistic once the tires get enough bite 😱🤣🤣😎💪👊👊
Absolutely EPIC Vid Gents 💪 👊 Luv the synchronised blasting & sending of the 2 x O8S rigs, from dawn till dusk #KeepHammering
Thanks so much Jason 🤗. We definitely bashed into the night 😍. Running 2xO8s was a Blast !!!! 🍻😎💪👊👊
OOOOO YES Brother, Great RICH you and your friend really put on a show 😎😎💪 the outcast is really a beast, it's finally back, I remember the last time with that bad accident 😱😱. I love 1/5 Backflips, they look really cool, can't wait to try, for now I bought the Proline Trencher 1/5, they look really sturdy. That buggy was really a ground to air rocket hahaha.
Nice video Bro as always 🤗😜😁👍👍
Thanks so much David 😜. So nice to have Big Red back 😍. She's feeling better than ever since the rebuild 👍. Had a Blast with Dave and his new 08s 😱🤣🤣. The 8s Backflips are fantastic. Great traction and not too Crazy heavy. The Typhon 6s is a little cruise missile 👀🤙🤙😎💪👊👊
Tandem OC8S jumps might be the best thing to happen in 2020, great bash guys!
Thanks so much John 😜. I thought I might land on Dave's, but she just kept sailing 🤣🤣😎💪👊👊
Really Sick ComeBack With That Outcast.That Thing Is A Real Beast.Great Job Man.And That Sesion With Dave Was Awsome.I Thought His Max Was Gonna Take Off. Two OUTCAST Cant Beat That.Cant Wait For The Next Vid.Nicely Done Guys.
Thanks so very much Javier 🤗. Felt like a redemption bash after the death rock 😱🤣🤣. So awesome to have her back dialed and get such a Killer fun session in with my brother David!!!! 🍻🤙🤙😎💪👊👊
Wow Rich, that 8s beast looks like it has the power to weight of a 6s now! That thing rips!
Thanks Brother 😜. She has Crazy torque with this setup 👀. Definitely ramps up the Fun factor a notch. 🍻🤙🤙😎💪👊👊
Killer rips guys! Folsom lake looking low...need some snow this winter.
Thanks Trent 🤗. Yeah it's looking more like a pond right now 🤣. The boat ramps are all closed. I'm taking advantage of the open terrain in the meanwhile. 🍻😎💪👊👊
Glad to see the outcast back out. She looks a lot better with a face on her. Not done with the video yet, but already epic 🤙🤙
Thanks so much Brother 🤗. That death rock hit did a serious number on her grill 😱. Definitely lost a few teeth 😂. Felt awesome to get her shaped up and really test the 980kv 34/39 set-up 😍👍👍😎💪👊👊
@@richduperbash2966 well she seems to be in good shape! Patiently waiting for the next video 🤘🤘
Man, you guys sure know how to have fun. That bashing session looked absolutely sick. Why can't I find a bashing spot like that? Thanks for sharing.
Thanks so much Lou 🤗. Had an absolute Blast out there with Dave once again 😱🤣🤣. Really needed the laughs 🍻😎💪👊👊
Just an epic piece of footage/content! Love it, brother. Out there with your day one-road dog running like a bunch of beasts!
Best in the business buddy! Have a good day!
🤝🏎💪🤙🏽💪🏎🤝🤝🤝
Thanks so much Brother 😜!!!! Love this place for bashing. Happy New Year. 👍👍😎💪👊👊
Awesome lakeside rips to start the wicked session with David Rich. Twin O8s looks amazing under the bright sun 🌞 brother. Glad to see her back out after that brutal Rock hit. She absolutely hauls with your gearing setup bro. Wicked launches off the ramp and nailed those DB with some smooth timely landings beautifully. Props to the wizard's incredible upgrades, it undeniably takes this rigs to whole new levels. What was David's Xmaxx smocking?! Thing was loud AF 🤣. What an absolute Fun session brother. Stay safe and bash on brother.
Thanks so much Brother Chris 😜. Had a Blast at both spots 😍. Felt Killer to test the 980 set-up again, this time with plenty of space 😱🥰🥰. David is running the Hobbywing 800kv combo trying 1/1 gearing in his XMaxx 👀. It's an animal with the big Badlands on there. Definitely makes some noise 🤣🤣. He's absolutely digging his new O8s Bro. Totally different from his X of course. I gotta hand it to him for letting her fly the first bash. We got a late start, but stoked we made use of the sunlight 🤗. Sucks the days are so short now 😂🤙🤙😎💪👊👊
Awesome video! 👍😉
Thanks Brother 😁. Happy bashing. 🍻👍👍😎💪👊👊
@@richduperbash2966 you too man!! 👍😉
That last clip 10:32 was dreams! Another amazing video from King Duperbash!
Thanks Brother 🤗. Had another super FUN session with brother Dave 😱👍👍😎💪👊👊
@@richduperbash2966 Does Dave have a channel?
@@andybcardoso1978 yes indeed 👍. I pinned his comment at the top 🤗. Dave recently got a new camera and did a build overview and bash with his 08s. 🍻😎💪👊👊
That's a sweet truck. It's been a while since Iv'e run any of mine due to illness and life changes...
Thanks Brother 🤗. Sorry to hear about your illness 👀. Hope you're feeling better my friend. 😎💪👊👊
Thank You Rich... Iv'e missed out on alot of bashing.
Great bash. Still hurts every time I see that rock crash!
Thanks Avery 🤗. Yeah that impact was next level 😝. Hopefully the worst I'll ever have. The damage would've been WAY worse without the M2C Beef 🍻👍👍😎💪👊👊
I just got my arrma kratton 6s v5 yesterday and even on 4s completely stock seems like a beast. I can imagine 6s. But this thing is absolute f*****n ANIMAL bro. Nice run!
Congrats Cory 😱!!!! ARRMA has been working feverishly with new releases and improvements 😍. Enjoy your new Beast Brother. 🍻👍👍😎💪👊👊
Thx bro! Today I'm going to block the inside holes on the wheels and put vent hold in the tires like you recommended.
is there anyway to keep rocks and pebbles out from the drive shafts? I keep getting rocks getting bound up under the tbars and one even slightly bent a bar and it doesn't spin evenly. I guess I could rig up some kinda bud gaurd possibly. cool video!
Pretty sure Tbone and others sell mudguards. Those should definitely help keep rocks from jamming up quite as frequently. 😎💪👊👊tboneracing.net/products/tbr-rear-mud
Great video as always bro!!! The Outcast 8s with that combo is impressive!!!!!! ;-)
Awesome bash bro , super fun stuff !!!
Thanks so much Stephane 😜. Your TEKJO Gaskets fit like a glove Brother 😍. Keep up the great work my friend!!!! 🍻👍👍😎💪👊👊
💖💖💖🙏
I love watching your videos you just send it all the time
Thanks Trevor 🤗. Happy bashing Brother 🍻😎💪👊👊
Nice video brother looked like a beast with that setup 👊 keep it coming
Thanks so much my Brother 🤗. Loving this setup 😍. Just have to ease into it some or keep doing wheelies 😱🤣🤣😎💪👊👊
Man glad to see you bashing again brother how you like the new v5 line up hate the talion didn't make it.when is the 7or6 scale typhoon coming,🤔🤔🤔,🙏🙏😇😇🤔
Thanks so much Dhon 😜. I think ARRMA did well with the V5's 👍. Just tossing the plastic turd STX2 was HUGE 😂. The new Spectrum electronics are actually very nice. Next year's Talion should be a home run 👀. I'm crossing my fingers on more big scale hits too 😍😎💪👊👊
i get a bunch or RC vids recommended and i always end up realizing im watching one of your video when i hear you laugh HA HA !
Nice Tandem bash session 👍
Thanks so much Ray 🤗. Sorry I missed your comment Brother 🍻😎💪👊👊
Awesome bash brother.
Thanks so much Trent 🤗. Happy bashing Brother 🍻🤙🤙😎💪👊👊
IMO, you have the best bashing videos on RUclips, keep them coming, I really enjoy watching your video! I want to get an Arrma for bashing too after watching your videos, do u recommend the Granite or the Big Rock? Or should I wait for the 4S Kraton coming out next year?
Thanks so much Alan 🤗. Really appreciate the kind words. I would probably pick the new Big Rock over the Granite. ARRMA widened the stance (among other things) and it's much easier to get the power down with the longer, more stable chassis 👍. The Granite is Fantastic at the skateparks with it's ability to turn on a dime 😍. Not sure I'd wait for next year's releases. There's no wrong choice regardless. 🍻😎💪👊👊
@@richduperbash2966 Thank you Rich, your input is highly regarded. 👍🏼
Rich you are the Rc king love the content bother ...... Couple of questions for you is the 980kv good for top end and if so can it be done with a stock spur gear and just going up on the pinion gear?? Thanks rich
Thanks so much Brother 👊. The 980 is a powerhouse. Great top end. You could gear tall and get good results. Which pinion to opt for, I'm not certain with the stock 47T spur. I'd opt for the direct fit 8s 39T spur gear ARRMA now offers, personally. My setup using the Limitless 39T spool gear works great too, just requires use of 2 grub screws. I think they copied me 😂. It allows you to achieve perfect gearing without a gigantic pinion. 🍻😎💪👊👊
Good session fam, nice action as always 💪🏾💯
Thanks Brother 🤗. Always more fun with friends and RC family 😍👍👍😎💪👊👊
@@richduperbash2966 facts 💯🤘🏾
Great vid! I’m in the Roseville area. Question, where is the second spot you are bashing at? Want to take my kraton 8s out where there is enough room to let it rip. Thanks keep up the great vids
We were at the Laurel Ruff education center off of Hemlock. There's a baseball backstop with an entrance to this area. Just watch for people walking their dogs out there. 🍻😎💪👊👊
@@richduperbash2966 thanks for the info. Once again keep the vids coming👍🏽
@@richduperbash2966 checked out this spot you recommended. It’s a great spot for some speed runs at that hill. The kraton 8s and the UDR did great.
@@therocksac awesome to hear Brother 😍. Lots of space to haul ass. That dead grass is a little slippery, but it's fun to rip around out there. 🍻
Killer jam session 🤘🏻
Thanks Brother 🍻😎💪👊👊
Just absolutely sick footage as always Rich!! Poor Folsom looks drained! Shout out from Elk Grove!! I don't know if you know this, but in Elk Grove they have a BMX Park with some super vertical jumps I think you would really enjoy bashing. I was just out there yesterday with the Arrma Outcast 6s. I know I've seen you at Elkhorn BMX and what looks like Roseville BMX (not sure if that's still there). But yeah big big jumps in EG and it's a nice little park with a lake with fishing. It's a nice little place IMO.
P.S. I watched that death rock hit like 50x times. Jesus that was a hard hit. I think that tops anything Kevin Talbot has done!! (Death rock impact) Insane air for 1/5 scale! Rich Duperbash the LEGEND!!
Insane, but did you see talbots long jump?
@@kieranb1275The world record jump? Yeah thats some insane air!! He also had the jump at the skate park that snapped the chassis in half of a kraton I think? But that hit on the death rock... Listen to the audio that thing hit so hard my v1 arrma felt it
Yh that made me cringe of course the same day as i got my kraton lol
@@cloane85 thanks so much Carson 🤗. I LOVE EG bike park 😍. Been there a bunch. It's packed a bit tight now with rhythm sections compared to 2 years ago, but still Fantastic 🥰. Just tough to find it empty since Covid and distance learning....etc. Roseville's Oak Creek BMX is off limits unfortunately. They'll call the cops 100% 😝. Hopefully, we'll see a dedicated public bash park in the region someday. Catch up with you out there sometime Brother 🍻🤙🤙😎💪👊👊
@@richduperbash2966 Yes you are correct with covid restrictions there are lots of people there. A dedicated bash park would be insane. I would pay to use. We're still lucky to have what we got though. Some people have nothing decent. See you out there bash brother. Bash Brother shirt? I'll buy!! Lol
Man that car is insane
I just picked up a new outcast 8s... and recommendations on what to do immediately? I’m looking at diff fluids and changing to the 23t pinion but not sure if the stock electronics will hold up under hard bashing with that gearing. Thanks as always Rich
Congrats Justin 😱!!!! The O8s can take that 23T all day long. The electronics are super efficient 👍. I ran 23T since the first run and even ran 23/39 gearing with the stock system 👀. I recommend 1 million cst front and 500k rear diffs. Putting 50/50 Silicone earplug and 20mil cst center works Fantastic 😍👍👍😎💪👊👊
@@richduperbash2966 Thank you very much as always... I now own a full m2c beef cake Talion and the O8s because of you 🤣
Excellent as usual. Glad to see her back in Action.
Did you have any issues with your packs?
Are you running an arrma 39t spur or the infection one with grub?
Thanks so much Brother 👊. Felt great to have her rebuilt and back running better than ever after the boulder smash 😝. I'm still running my Limitless 39T mod. Good to see ARRMA begin to offer a direct fit option though. Just what this platform needed for lower kv, higher torque motors especially. No issues with my Lipos. 🍻😎💪👊👊
Was wondering what kind of run time you are getting with esc, motor, and gearing set up I’m considering doing the same thing to my outcast 8s keep make these great videos love watching
I'm getting about 20+ minutes or so running Zeee 7200mah 80c 4s hardpacks. Just depends on how hard I'm digging into the throttle. Thanks Brother 🍻😎💪👊👊
I love that truck!! She’s a beast!!
Thanks so much Brother 😜. I love her too 😍. Just a rush feeling the power hooking up 🍻😎💪👊👊
Nice. I'm about to go test my Outcast 8s with the XLX2 and 800kv motor 39/39 gearing. So the stock tires are taking that abuse well bud? My duratrax lockup x 24mm belted tires keep coming unglued with my max 5 1100kv motor 25/35 gearing on my xmaxx. I'll try the Outcast 8s tires on it. Hehe. That was tons of fun!
Thanks so much Brother 👊. Your O8s is gonna Rip 😱. I'd stick with a linear throttle curve with the Castle and go easy with the trigger 👍. Hopefully they'll sort out the bad units. Seen several turd out already 🤔. The O8s Backflips are super impressive 😱. Just make sure and vent them. Same with the belted Duratrax. I've had to reglue mine a few times. Scoring the beads and rims with sand paper and using AKA premium glue has been working for me. Looking forward to hearing feedback about your set-up 😱👍👍😎💪👊👊
@@richduperbash2966 Yeah it's a brand new product (the XLX2), but sometimes I take my chances like I did with the O8S, Kaiju 6s and now the XLX2 🤣. Thanks for the tips. I let my 4yr and a half old son drive it today, so it was at only 20% power. Hehe.
@@richduperbash2966 I don't know Rich but I honestly think that my X-Maxx running the hobbywing max 5 and 1100kv motor with 25/35 gearing feels and looks so much more explosive. Maybe it's the gearing? Running 39/39 on the O8S and one of my O8S tires came unglued. That's why I'm using the 4.3 badlands on the xmaxx. Or maybe it's that 1100kv motor on the xmaxx and way less weight? Hehe. I mean, the O8S is not slow at all. I just feel that the xmaxx gets up to speed much faster. Maybe because I'm using 1.5 mod gears on the xmaxx? Hehe. I might try that 1100kv motor from castle once I find it.
@@joseCalderon1976 the weight savings of the XMaxx makes it more agile off the line, but the Outcast completely hauls ass when you can keep the nose down 🤣. The gearing and setup (and Lipos) makes all the difference. 800-1100kv is a great range. The 1100kv winds up wonderfully for top speeds. I always try to gear for about 55-60mph with good torque, usable power, and reasonable temps. That's plenty fast for bashing, especially for these big heavy rigs 😱.
@@richduperbash2966 I know right? Since I accelerate and stop pretty quickly I don't notice how fast the O8S really is. Unlike you that goes like a mile away 🤣. Honestly the stock system did very well but I do appreciate the extra torque and speed of the XLX2 and 800kv motor. More control in the air and more insane speed 🤣.
You have been tagged buddy👊
Shes back 🤘🍻 thats awesome man glad to see her back to good health.im loving my O8S my only problem im having is my body i burst a mount through on her 3rd run lol whoops. How did you like using half ear plugs in the center? Did it help alot? Ive gottavtry something to lower the front ballooning so much.she looks great and some great sends.looked like that was a blast. Thanks for another great video man 🍻
Thanks Nick 🤗. Great to have Big Red back rippin it up 😍. Bummer on your body. Definitely get some shoe goo and drywall tape on her. I used about 3 containers on mine and it's payed off. The body holes got a tad tweaked with the death rock smash, but no cracks anywhere 👀. The silicone ear plug/20mil cst mix definitely makes a difference. Same thing I did with my K8s. Vent the tires too if you haven't already. Happy bashing Brother 🍻😎💪👊👊
Wow, amazing video! What ramps are you using?
Thanks Brother 🤗. Absolutely LOVE this big Beast 😍. Those ramps were from Discountramps.com. Think they stopped making them unfortunately. Been listed as backordered for over a year. 😎💪👊👊
That thing rips!
Great video man!!! Loved the shot of the 2 in the air after they hit the ramp. Just amazes me how them big heavy rigs can take such a beat down!!! And question what are them ramps u where useing? Thanks stay safe bro 🤙🤙🤙
Thanks so much Jordan 🤗. Had a Blast at that new spot David found. I bought the ramps from Discountramps.com a couple years back. Haven't seen them online in awhile unfortunately 😝. They work great on mounds and hills if you stake them down. Hopefully they're still available somewhere. 🍻😎💪👊👊
Yea that super cool that u got buddy's that enjoy the hobby. I am yet to find anyone to bash with☹️. But yea I was looking all last night for some like that. I know I ordered a set off Amazon the green and black ones. They don't have a kicker to them so I get know air. But thanks for the reply and info. I'll have check there. Stay safe and looking forward to the next video 🤙🤙🤙🤙🤙
And this is why I have a Typhon 6s v5 arriving tomorrow.👊 Any thoughts on what pinion is best with sock electronics?
Congrats Doug 😱!!!! I would recommend a 16-18T with stock electronics and wheels. Such a fantastic little Ripper 😍👍👍😎💪👊👊
@@richduperbash2966
Hey Rich, what batteries do you run in your Typhon? Specifically I mean do you run a single 6s or 2 3s? My 2 3s spektrums wont fit so I'm trying to see what everyone is doing.
@@dougk4071 I'm running Hobbystar 6s 5000mah 100C single hardpacks from RCJuice. I always cut off the loop connector and solder on a single EC5 off the ESC. Fits like a glove. Also always put a strip of yoga mat at the base of the battery tray for some shock absorption. 🍻
Beautiful jump guys
Thanks Luis 🤗. Had a Blast out there. 🍻😎💪👊👊
I talk to you one day a messenger
I have a zD racing 1/8 scale buggy it's the only thing I have my dream is one day to have an arrma
Rich do you like this truck over the EXB. I'm looking to purchase either and asking your opinion. Thanks! Your videos are insane ❗️❗️❗️❗️❗️🔥🔥🔥🔥🔥🔥
I really love them both Frank 🤗. They're to different too compare. The EXB is a must have in my book though 😍. It's the perfect size for all around high speed bashing. The O8s is better on gnarly big terrain and it's own rush though. More work and expense, but worth it in my opinion. 🍻😎💪👊👊
@@richduperbash2966 thanks for the reply Rich. I’m going to purchase the outcast 8s for my pick of the big scales. I’m waiting on delivery of the notorious 6s in flat black today just to see how I like it. Fist time with a Arrma so I figured I’d start small first. Loving ALL your videos as I’m a new subscriber. 👊🏼👍🏼
@@FrankA-973 thanks Bro and Congrats on the Noto 😱!!!! Super fun and capable Beast. Pretty certain you'll love it 🍻
Awesome beast!!!
Thanks Mike 🤗. She's feeling stronger than ever 🍻😎💪👊👊
Would you go with the 1:1 gearing on the Outcast like the Kraton 8s?
How you like that motor champ I just bought the 990kv tp motor putting it in a limitless xlx2 should be fun lol
Absolutely LOVE this Hobbystar 980 56112 😍. Just a workhorse. Congrats on the TP. Should move nice with the right gearing. 🍻😎💪👊👊
Hi Rich, what m2c motor slide are you using with this motor? Awsome vids btw...
Thanks Brother 🤗. I'm using the standard 8mm slide. Not the big pinion one. I'll try and link it up. 😎💪👊👊m2cracing.net/arrma-kraton-8s/444-m2c-3253-arrma-kraton-8-s-8mm-shaft-size-motor-mount-slide.html
Just copied your setup Rick gonna order Beefcake kit which motor mount is correct low or high kv? Sweet truck love your vids keep em coming Thanks Josh!
Thanks so much Josh 🤗. Believe I've always used the high kv slider because I run smaller spur gears, either 34 or 39T. The issue with the large pinion/low kv setup is it was designed when ARRMA only had the stock 47T spur. When I wanted to run 34/34 gearing with my 840kv Hobbystar, I found I couldn't get the slide in far enough to mesh the gears. With the high kv I haven't had any issues with any of my gearing setups. 🍻😎💪👊👊 m2cracing.net/shop/shop.php#!/M2C-3253-ARRMA-KRATON-8-S-8MM-SHAFT-SIZE-MOTOR-MOUNT-SLIDE/p/478044534/category=136127903
@@richduperbash2966 Thanks for all your help Rich!
@@JoshuaAppel you bet Brother 👊
Hi - what brand dual ramps are you using in the beginning and end of the video? I am looking for something light an portable. I built a great wooden ramp but it is too big and heavy to transport
Thank you!
Rich I have a quick question for you about the hobbystar 980kv max5 combo your running. Did you just solder new 6.5 bullet connectors on the motor leads to make it work with the max5 and if so any issues at all with it. Don’t really want to get an XLX2 because of all the fire issues plus I’m a hobbywing guy. Thanks for any advise you give me love your videos
So sorry I missed your question Clayton 👀. Yes I melt off the 8mm Hobbystar connectors with my butane torch and solder on 6.5mm to fit the Hobbywing. When the XLX works right it's great from what I hear. That said, Castle (like Traxxas) is generally overpriced for what you get in my opinion. The Max5 has worked very well and been very reliable for me personally. 🍻😎💪👊👊
wholly beastcakes duperbashman. DOOOH! death rock replay! %$&!
LMAO 🤣🤣. Yeah that death rock was so worse case scenario 😱. The total damage would've been WAY worse without the M2C chassis 🍻😎💪👊👊
@@richduperbash2966 Notorious M2C beefcake slices should be here tomorrow! now i'm just saving up for the "OutTorious" 8S. #blameDuperBash
what were your temps at?
My mini temp gun crapped out and I forgot my backup. Motor felt pretty hot after running hard in the sand. ESC was probably 130's. Sorry I didn't get numbers. 😎💪👊👊
Rich,
Do you get any low throttle clogging with the 34/39 gearing. I’m getting a little more than I’m happy with running that combo. I was wondering if you stuck with that gearing, or went down on the pinion. Also, I snapped a 7mm M2C shock shaft just doing some light bashing!!! I know they will take care of it, but I wish there was a solution to the weak link in this truck with the shocks. Any input on your suspension set up would also be appreciated.
Thanks for all the videos!!
Hey Jason 🤗. I originally did have some cogging with 34/39 980kv in my Kraton, but later realized I had a connector going bad as it unsoldered towards the end of the run. Really didn't have cogging at all in my Outcast with the stock size wheels. I do think 32/39 is better for any beefier wheels especially 👍. This system got borrowed into my K8s EXB and 32/39 worked Killer with the bigger style Copperhead 2's. Unfortunately, my 980kv took damage during my earlier "Death Rock" incident and the endbell eventually stripped out completely along with a very stretched out wire harness. That sucks you broke a 7mm shaft 👀. That would normally take considerable force. I still think running softer suspension with 35 weight front and 30 rear is a good mix with the M2C pistons. Make sure not to overfill your shocks when running the stock caps and bladders. I usually leave around 3/8" from the top before bleeding them and tightening the caps. Hopefully we'll see an M2C bladderless set-up soon. 🍻😎💪👊👊
@@richduperbash2966
Thanks for the reply.
I’ll double check my solder joints and connections. Also good input on shock oil. I think I was running 50. I’ll drop down a bit once I rebuild the shocks. I know Mitch will take care of the busted part. It must have just been a weak one from the start, because it really saw no abuse.
Thanks again!
@@richduperbash2966
Do you like the HW1100 motor or the HS980 better? I have an 8s outcast to put a motor in and was curious. So far, the 980 is great, but just wanted your input on the HW1100
Great video, just wondering if putting heavier diff oil in my front diff will help with my wheels ballooning and tyres coming off my rim's, just got standard in all diffs at the moment and just put a 1100kv hobbywing motor in with a 30 t pinion but haven't tried it out yet so don't know if it will be even worse on the tyres, if not might try some badlands mx43, what do you think always appreciate your input, take care gaz 😉✌
Heavier oil helps with ballooning, if you put it in the center diff instead. Heavy oil in front/rear diffs might help in turns, but generally you only need it in the center diff.
@@sampuhhupmas5666 got 20 million in the centre so apart from mix of silicone plugs and silicone oil, maybe new tyres and wheels as mine came off the rim and now they come off even if u use the strongest of glues, thanks gaz
@@gaviscon4304 the heavy fluid/silicone ear plug definitely helps big-time 👀. Make sure to vent your tires with 3/16" holes and tape up the rim holes. 1 mil cst front controls diffing out while cornering which helps from blowing tires up. Same with 500k rear. 🍻😎💪👊👊
@@richduperbash2966 thanks for the reply got the tyres vented, might have to try changing my diff oil have u used proline mx43 s on your kraton or outcast 8s as wanted to know what there like thanks again stay safe, and your always so helpful gav 👍✌
@@gaviscon4304 I have ran belted (and vented) Duratrax Six Packs X's and Lockups. Haven't tried the MX43's due to weight mostly. The Duratrax already add about 1.5lbs 👀. Heavy wheels take away agility, contribute to breakages, and add strain to driveshafts and electronics/gears. Some guys love them. Heavy wheels just aren't for me. 👍
I see David’s truck is running a castle system. How does it compare with your setup?
David is running a Castle 8s ESC with Hobbywing 5687 1100kv motor and 34/47 gearing I think 🤔. It's super smooth and plenty fast 👀. Doesn't have the raw brute torque of my Hobbystar 980 56112 34/39 set-up, but he seems happy with it. I also ran that motor in my Kraton and M2C Crusher 8s SWB. Haven't tried the Castle 8s ESC myself. 🍻😎💪👊👊
Rich did you see arrma is making a 39t spur for these now? I ordered one just waiting for it to show up wondering if you have ran one yet?
Just saw that Josh 🤗. That's great Brother 👊. Looks just like the stocker but smaller. This is a prime example of ARRMA watching and listening to what basher's are doing to improve their rigs. 🍻😎💪👊👊
@@richduperbash2966 yes I agree with you on that. I should have mine any day now ill let ya know how it works compared to the spool.
👍🏻 😊 👌🏻 Wow nice 👍🏻 😍 👌🏻 🤜🏻🤛🏻
Hey. I am running HS 980kv with HW max5. 39/31. With PH batteries and my ec5 connectors are getting xtremly hot. How can I solve it? I do not see you having that issue.
I'm not familiar with PH lipos. Could be a bad solder joint causing resistance, that's my best guess. What are the battery specs and are you getting specific numbers on the temps with an infrared temp gun 🤔
hi rich I'm always watching great videos.😎 5 scale outcast is really powerful 🤛👊🤜 I saw really cool video 🤩 What about shock oil? Is it 40w (500cst) as it was? Or did you do something higher? My outcast sometimes breaks the shock end after jumping. I am 575cst Show me a little more 5 scale outcast video next time😎👍👊
Thanks much Brother 👊!!! I'm running 30-35 weight with Mitch's M2C Racing pistons and hardened shock shafts. Same weight I use with the stock set-up. 😎💪👊👊
@@richduperbash2966 I am also using m2c products like you, 😎👊thank you Bro 👍
I need to change the shock oil to a lower one
💯💯💯
I need one!!
Pazzesca spettacolare💪👍💯❤️
Funny how you said "Spread the legs and see how she does." 🤔
LMAO 🤣🤣. She was getting loose out there 😅🤙🤙😎💪👊👊
LMAO😂😂
What camera are you using to capture all this?
Using an older GoPro Hero session 4 🍻😎💪👊👊
Have you set the punch to the highest level man? Thank you mate :)
I think I set her to max punch 5 and turned the brake up slightly. The Max 5 has Killer power delivery even at stock punch 3. The 980 56112 Hobbystar is a workhorse 👀😎💪👊👊
@@richduperbash2966 violent punch mate
Hey Rich I know this is an old video but can you explain why you have 1 miilion cst in the front and 500k cst in the rear? Im in the process of doin my diff fluids and was wondering why it wouldn’t be 1 million in the rear and maybe 500 k cst in the front? Don’t you want it more loose and flexible in the front? Love all your videos as always you’ve taught me alot
Hey Brother 🤗. Most race rigs use heavier fluid in front (than rear) for better handling and overall control. I've found the same principal applies with bashers. The turning, drifting, and power delivery works best with more rear diff action. Makes the rig more predictable. You're also less likely to blow tires when going a bit heavier. Feel free to experiment, but using heavier front fluids (compared to rear) works nicely. 😎💪👊👊
@@richduperbash2966 Awesome!! Thanks so much
@@darksunridah you bet Brother 👊. Here's a link to a good summation from EuroRC. I tend to agree with most all of it, except I run heavier weights in my bashers than what they suggest. www.eurorc.com/page/149/differential-oil-recommendations
How are you temps? I have the exb kraton 8s and was thinking about running 32 /39 on the hobby star 980kv with a xmax heat sink. I don't like fans they break to easy from hard non stop bashing.
Hey Nick 🤗. My temps have been just fine running 32/39 with the 980kv 👍. Probably 150's tops on average. That's actually my goal temp with most all of my set-ups for maximum performance and efficiency. I don't like fans on my bashers either. They just can't take the pounding. 🍻😎💪👊👊
@@richduperbash2966 right on broski. . 🤘
I think you're the Gentleman @kevintalbot mentions???
Hey rich! I’m looking at buying the 8s outcast exb roller. Not sure what motor to get. Speed is fun but also like torque and bashing. Should I go with the 800 or 1100?
I'd recommend the Hobbystar 56112 980kv paired with a Max5. 32/39 gearing for heavier wheels. You can run 34/39 with the original 8s Backflips no problem. The 800kv is better suited for the Kraton. 1100kv 5687 can work, but the 980kv is hands down the best set-up I've ever run on the O8s. Just realize the Hobbystar motors come with 8mm connectors. You have to solder on 6.5 to fit the Max5.🍻
Thanks rich! One more thing, do I need to get the m2c motor mount and slide to fit that motor and spur?
@@taylorterschuren9782 no you just need the ARRMA 56 series 8s slide if your rig didn't come with one. If your slide bolts up you're golden. 🍻
You the man! Thank you!
Hey rich! I got that set up and it’s great, tons of fun. I noticed tho sometimes the throttle dies out in the beginning. Kind of like bogging, not good for jumping. Could it be my lunch is too low? Or I’m running a sensor esc without sensors motor? I got the new max 5g2 and it’s sensored
lol, I made the ExACT same "O0ooH!" perfectly syncronized!
It was like watching someone hit their nU*Ts on a log hehe, big F..
Much respect ;)
Nice bash also, both those cars are BEASTS! :D
Thanks so much Brother 😜. That impact was so Brutal in person 👀. I knew instantly there was serious damage and she was done. Still amazed my electronics, arms, links, shocks, body, and packs survived 😱. The nose of my M2C chassis tagged the nose of that boulder just right 😂. Great to have her back out dialed with Dave and his new Beast 🍻🤙🤙😎💪👊👊
Which is more durable, outcast 8s or xmaxx?
That's tough to answer because both are very durable, but can have breakages too of course 🤔. The Outcast definitely has better gears/diffs and handles better. The XMaxx is noticably lighter though and that helps overall durability, especially when you screw up badly 😱🤣🤣. They're designed so differently 🤔. Both benefit greatly from strength upgrades. 😎💪👊👊
Good
What is that little buggy and what is in it that thing is insanely fast
That's my V2 Typhon 6s fully loaded with M2C Goliath Series chassis, towers, braces, suspension mounts....etc. She's a little Tank Ripper 😍. Running the Max8 2200 combo with an 18T. Toughest/fastest RC I've ever owned . 🍻😎💪👊👊
Just to verify diff. fluids you are running 1million front, 20 million or 200,000 center. & 500,000 rear?
Front and rear are correct 👍. Center is 50/50 mix of 20mil cst (Gravity RC ) and Silicone earplug. 😎💪👊👊www.teamgravityrc.com/online-store/Pure-Silicone-diff-Putty-20-000-000-cst-20Million-p56979859
@@richduperbash2966
Thanks! Aloha!!!
Fucn Beast
Thanks Brother 😜. That sums it up nicely 👍👍😎💪👊👊
Does anybody have a 1/10 brushless system they don't need?
This is how you bash like how do you get your cars to go that high like not even Kevin talbolt can get it that high !also you Kevin talbolt and v2 vids should be in a jump competition either you post one of you biggest jumps or make one and then see who jumps and looks the highest or you guys could meet together and do it plz do it !!!
This guy cannot murder rccar but Kevin can
Content may not be suitable for children. Viewer discretion is advised. 🤣
The death rock was "extreme violence" 😱🤣🤣😎💪👊👊
Thats just a Max 5 ESC?
Yep. The Max5 is perfect for this rig. 🍻
@@richduperbash2966 Thanks brother!
Rich please buy a Losi LMT and bash the piss out of it , I want to see how tough it is!!!
Looks quite overpriced for a 1/10 Brother 😱. Seems to have good specs, but not my cup of tea really. I like being able to corner at speed without tumbling. I'll give them props for MT realism though 👍😎💪👊👊
@@richduperbash2966 ya it is expensive, I think I will save my money and get an on road kit , been racing on road alot. The Vintage Trans Am class is a blast , still bash my Teknos tho 👍😁
@@richduperbash2966 hey Rich what wheels/tires do you recommend for my Tekno EB 48.3? I'm making it into a basher , and do you raise the ride height or change the setup on the suspension blocks ? Thanks
@@midwestboss8808 I would try running Proline MX28's with 17mm hex. My buddy Gary from Killer off-road Hobbyz had them on his EB48.3 and it friggin ripped 😱. No changes needed on the suspension. 🍻
@@richduperbash2966 awesome thank you! Last thing I was wondering , what diff oil weight you recommend? , I'm running 6s , and what shock oil weight I should use ? Thanks Rich. Your a legend!
Roadkill from the smallest vehicle ever on an actual living animal LOL
I mean it's cool and all but why spend all that money on the truck when you're going to just put your own electronics in it I that's Got to of cost you
Nothing wrong with the stock system. Mine just has WAY more torque and raw power 😍. I don't mind modifying or spending to make rigs how I want them. 🍻😎💪👊👊
SEND IT!!!!!!! great vid💯✌🏽
Thanks Brother 🤗. Had a blast out there at the Lake 🍻🚀🚀😎💪👊👊