Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
If you ask me, I'd tell you to skip the step of marking the lines with a pencil. (Why do you need it anyway? What did you get out of it?) You can start right at the stage of the black adhesive tape. The distance of the spiral can be estimated by eye, and there is no need for millimeter precision, so there is no need to mark with a pencil.
Ребята-вы наблюдаете редкий вид "жуков-самоебов". Популяция этих жуков варирует от числа просмотров видео более доминантных особей. при контакте с ними аккуратнее и обязательно мойте руки.
People would've loved it in the past when the architecture, design and furniture where using those forms!!! Nowadays minimalistic approaches with straight angles and less detailing is the trend.
@@jayrobelo9877 neah!....it will be way more straight lines maybe some curve lines but minimal.....more spaceship look alike design .... haven't you seen futuristic design in movies? That's where we are heading! Faster production, minimal detailing work, but superb minimalistic design....very cold approach , is true.
What. Is. It. I feel like this is the sort of thing an archeologist from the future will dig up, be bewildered about, and go "iT wAs A CeRimoniAL OBjeCt."
He learnt whilst doing this there wasn't enough punch in the drill to turn the "wood lathe" whilst the files were on it haha Thanks for the likes! Check out subing to my own channel if you love dogs and general weird also built myself a man cave bar which is going to be uploaded in the next coming days!
@@cobra6481 by real lathe, I'm guessing you mean engineering lathe? Because you could just engage the lead screw and cut it, as if you were cutting threads. Surely? Just need some unusual tool geometry and be tricksy. I'm now going to have to spend an inordinate amount of time trying it...
Блин это же имба из говна и палок деревообрабатывающий станочек. Прям реально для ленивых и кто ради сиюминутной фигули не захочет делать что то постоянное. Скрутил фанерки заточил два болта. При чем станок можно сделать под деталь. Не в каждый к примеру бита войдёт. Или захотел жене ступку своими руками замутить а у тебя в гараже старый шуруповёрт. Или талкушку или скалку. Да даже тарелку можно забабахать. При чем и станок и нужную вещь сделать можно за 20 минут. А вот дерево если ты сам все с нуля решил сделать ещё в лес сходить и год сушить в квартире. Или возле батареи за неделю но концы потрескается даже если с корой сушить
Does anyone else get really annoyed at the overuse and misuse of the word hack? This isnt a hack. Its using your tools effectively to create something. Its cool. Its a talent. It aint a hack.
I'm missing how all of the lines in the beginning helped? It turned out beautiful but did you need to mark it with pencil first couldn't you have just used the tape only?..
He spent so much effort penciling that gridwork and did nothing with it after he found out this "lathe" was garbage. This spiral wooden thing will spend the rest of eternity sitting on a Thrift store shelf. Picked up every so often, for the confused shopper to think "What the hell is this?"
I tried to make those spiral posts myself. Long ago now. You are to be congratulated for the beautiful job of it you made. It's much more difficult than you make it look too.
Декоративный элемент. Спинка кровати, стула, кресла, etc. Другой вопрос, что тут болгарка нужна, а не шуруповёрт, шуруп сдохнет от нагрузки на любом более-менее твёрдом дереве. Неплохо. Как говорил Доктор, лучше плохой станок, чем никакого станка.
Wow what a great idea, if only there was some sort of machinery that you could use to do this withing ruining a combi drill. That would be one hell of an invention.
Sometimes it’s just for the sake of making something out of boredom. Sometimes it’ll give ya an idea for something useful. I do this with metal. I just don’t make videos.
Oh she's gonna love that
Hahahaha
Oh you read my mind
Lol🤣
She gonna love what
You win the internet
"Now whats the purpose of this?"
"Nothing"
you can still throw it into a fire💁
His girlfriend:
Are you sure about that
@@erenakgun5809 😂
Bildo😶🙂🍌
I thought he was making cricket bails
If you ask me, I'd tell you to skip the step of marking the lines with a pencil. (Why do you need it anyway? What did you get out of it?)
You can start right at the stage of the black adhesive tape.
The distance of the spiral can be estimated by eye, and there is no need for millimeter precision, so there is no need to mark with a pencil.
Nor was there need monotously do it entirely by hand if you had a drill to speed things up.
I have no idea what it would be used for but it was cool to watch
I've always wanted one of those. Spiral piece of wood thingy!
How have I been living without one?
Maybe the real spiral pieces of wood thingy are the friends we made along the way
@@Cinn_ical that's a good idea. PyroSquid and Toxic will you be my spiral friends?
@@dadyalcity5801 me too
@@dadyalcity5801 we were already united with the creation of the wood spiral thingy shit
Me: mom can we get lathe at home
Mom: we already have lathe at home
Lathe at home:
Me: can I copy and paste this comment on every RUclips video I see mom?
Mom: it's already on every video I see
Jesus this comment is so overused and makes zero sense. Shows how dumb people actually are that they still like it.
@Мария Жаркова хам
@@dannythorpe1425 well tried
Ясно теперь, чем занимается мой сосед с верху. А я то думала, что можно так долго сверлить
When you worked in 5 minute crafts for 5 days
Finally niw ive learned to craft something to screw up in my ass
Lol😂
I actually laughed hard at your comment
Not sure it's threaded wide enough for you
Ahhh.. I was just about to ask wtf you'd ever use this for. Makes sense now.
Or someone else!🤣🥸🙄
Dude you're such a talented musician. I love the part when the grinder kicks in - beautiful vocal 😄😄😄
Ya kkkrsrs
Thought I was the only one who would notice lol
Ikr
I was hoping someone thought the same.😂
Major props on making a mini lathe with some wood and a drill! My ultra smooth brain wouldn’t have been able to think of something like that.
Thank you! Great video
Love that music beat then when the sander jumped in, sound like mann I hear something there.
Right!
@@t.m.a6669 kak
Had to be intentional, sounded so good, the slow down was exactly half the speed so the note went an octave down
💯
@@Hrisuk ooiiiiooo não é a primeira ideia com ela pra u
I love the sound the wooden piece makes when he uses the machine on it
Come to clash royale
Sounds like jazz
Neat,markin' the pattern with the tape, great work!
Классная штукенция, для чего его использовать?
Для анала
This is brilliant I've always wanted to make one of those.
For what?
ruclips.net/video/4G6e4TaJxkI/видео.html
0:09!
@@Rafael-ho9lc sus
@@Rafael-ho9lc for ass-drilling maybe🧐
🤔
Ребята-вы наблюдаете редкий вид "жуков-самоебов". Популяция этих жуков варирует от числа просмотров видео более доминантных особей. при контакте с ними аккуратнее и обязательно мойте руки.
🤔🤔
Totally awesome great work may God continue to bless you and your family well done.
Замечательный деревянный винт для деревянный мясорубки.
Definitely not bad, love how the sound of the dremel goes so well with the soundtrack
woho
People would've loved it in the past when the architecture, design and furniture where using those forms!!!
Nowadays minimalistic approaches with straight angles and less detailing is the trend.
P 21 Q10
,
Yeah they're going with the ``less is more`` style
Just wait another 10 yrs they'll be another trend going on
@@jayrobelo9877 neah!....it will be way more straight lines maybe some curve lines but minimal.....more spaceship look alike design .... haven't you seen futuristic design in movies? That's where we are heading! Faster production, minimal detailing work, but superb minimalistic design....very cold approach , is true.
@@EdgarTheEagle wouldn't that be trend? Lol
I found something similar like this in my sister’s wardrobe, but she never loved wood crafting n all..?? I will ask her what was that
Not a five minute craft if you ask me
Thats a magical mathematical tool
A curved stick. Would have never imagined such craftsmanship.
What. Is. It.
I feel like this is the sort of thing an archeologist from the future will dig up, be bewildered about, and go "iT wAs A CeRimoniAL OBjeCt."
Nobody asked
@@vincenzomusella5363 lol. Okay? You know that the comment I posted still boosts the video on the algorithm, right?
@Vincenzo Musella don't care
@@vincenzomusella5363 nobody asked whether anybody asked or not...
And yes I am a jerk of jerks and I will say it even if no body asked...
@@vincenzomusella5363 using your same logic - no one asked you about asking him not to ask
Всех с днём большого деревянного самореза!
Это не саморез... А ел...
...дак
Нафига а главное зачем
Wow amazing working 🙂
The only question is how many drills will you be going through a week lol
Everyone: Wow, Nice Wood work
Me: Wondering What is he gonna do with it?
That's one thing I was thinking about 😂
He's probably thinking he should shove it in his......
@@chesterm.bautista9308 drawer full of collectibles. Right?
@@puggyboi672 yes... yes...
It’s a fishing pole
When he started sanding the thing with a round-sander (i forgot what it's called ok) i swear it sounded like it was singing to the music 😂😭
Yeah me to 😄
Frfr
I wanna call it a flap wheel. But I have one for my grinder, and it's flat, not cylindrical.
You were close though! It's called a drum sander!
Ma cos'è? Boh 🥴🥴🥴
How many negative comments,I'm sure that many people who do wood work, Don't think the way you do!!!!
I just remembered 60 seconds ago when I didn't know this existed.
Good times
He learnt whilst doing this there wasn't enough punch in the drill to turn the "wood lathe" whilst the files were on it haha
Thanks for the likes! Check out subing to my own channel if you love dogs and general weird also built myself a man cave bar which is going to be uploaded in the next coming days!
It would screw the spacing up, it would have to be done at really low RPM or by hand.
You can't do this on a lathe
It wouldn't work...you think he didn't spin it because of that?
@@dannykeller1695 yep. Totally impossible to do on a real lathe with auto-feed..
@@cobra6481 by real lathe, I'm guessing you mean engineering lathe? Because you could just engage the lead screw and cut it, as if you were cutting threads. Surely? Just need some unusual tool geometry and be tricksy.
I'm now going to have to spend an inordinate amount of time trying it...
Wow you made a thing I’ve always wanted to know how to make a thing
Till this day we still search for a valuable hack in life.
That was extremely cool it was great to see how uniform the waves were in that wooden rod ❤👍🏻
Ok, I'm impressed with your skills, but what is it? What did you just make?
That's the thing he'll make anything you don't know, and rather can't specify it's need, but you'll be left impressed 😂😂
I believe it's a stick.
Come on guys don't troll this. It's called a Decorative Element. Hats off to this man's skill.
Come on guys don't troll this. It's called a Decorative Element. Hats off to this man's skill.
@@squigglyline2813 hahahaha, right!?!?!
Когда нечего делать делай вот так☝
А вот и диванные эксперты подъехали
Это когда совсем нечего делать
Блин это же имба из говна и палок деревообрабатывающий станочек. Прям реально для ленивых и кто ради сиюминутной фигули не захочет делать что то постоянное. Скрутил фанерки заточил два болта. При чем станок можно сделать под деталь. Не в каждый к примеру бита войдёт. Или захотел жене ступку своими руками замутить а у тебя в гараже старый шуруповёрт. Или талкушку или скалку. Да даже тарелку можно забабахать. При чем и станок и нужную вещь сделать можно за 20 минут. А вот дерево если ты сам все с нуля решил сделать ещё в лес сходить и год сушить в квартире. Или возле батареи за неделю но концы потрескается даже если с корой сушить
I’m so glad there’s finally a back for making a spiralled plank of wood!
This might looks easy but it takes days or hours to complete this with filing
вышла, скалка, для рельефный лаваш делать ,и мужа дубастить иногда,😅😅👍👍
В одно место теперь засунь 🤣
... Это крайнеполезноенихуя 😂😂😂👍
@@user-kp7nz1to7c здраассссссссьть
Ну вы жесткачь
Эта штука не засовывается а вкручиватся😃
250 мистеров санни из 250 😀😀😀
That is probably the coolest stick I have ever seen
Brilliant idea. keep it up.
Meanwhile his wife: ohh my goodness what a nice toy.
How tf would she use it? That would do damage
@@calvin2329 by screwing it
@@harshitbind8503 it still doo damage
@@calvin2329 lots and lots of lube
Sorry, I missed the “useless” in the title…
Some years ago there was a router/lathe jig available in the diy market to do these pieces including barley twist and hollow twist spindles etc.
*watches random woodworking video and looks at comments.
Damn! People are pervy!
Nice! But, what's it for? 😄
Views.
Pleasure
Does anyone else get really annoyed at the overuse and misuse of the word hack? This isnt a hack. Its using your tools effectively to create something. Its cool. Its a talent. It aint a hack.
I'm missing how all of the lines in the beginning helped? It turned out beautiful but did you need to mark it with pencil first couldn't you have just used the tape only?..
Perfecto Perfecto Y Perfecto 👏🏼👏🏼👏🏼 felicitaciones
What was the purpose of the lines?
To get his tape equally spaced and lined up
So he'll pleasure he's american rear hole
@@mexicopor6818 🤣🤣
@@mexicopor6818
And for blue eyes russian girls
😆😆😆🤣🤣🤣🤣🤣
He made boxes the same sized and went thru the corners of each box when placing the tape
Мы не знаем что это такое если мы могли знать что кто такое.
Let me translate that into English:
Mbi He 3Haem Yto 3To TaKoe ecnN Mbi MornN 3HaTb Yto KTo TaKoe.
You're welcome.
Он не нужон нам нахер интернет этот ваш
КАКАЯ-ТО ХРЕНОВИНА😂
The Wood WOW is magnificent & I now know how to build an affordable woodworking lathe….THANKS!!!!
That was so satisfying to watch.
"Life hack if you dont have friends to help you"
Perfeito! 👏👏👏👍🇧🇷🇧🇷
Buen trabajo sin torno.Magnifivo!
太漂亮了,植物的肌理
Я этого ... в Химках видел деревянными...
А при чем тут члены КПСС? 😂😂
Thats bring me to heaven wood craft
Wunderbar Bravo perfekt wunderbar 💪
Всякий, рождённый в СССР знает, что использовать надо только СИНЮЮ ИЗОЛЕНТУ!!!😃
P.s. А видео классное, автор - Мастер!
I feel like once you have to break out the power tools and sander, it's no longer a hack.
"Aight.thats cool.my wife want it"
bruh...
Легко и просто Класс 🔥🔥🔥🔥🔥
Don't let that tape go to waste!!!!!! Use it for drag clicking
"honey I'm bored!"
"I got chu"
I was lost with all the lines drawn on it in the beginning.
Thank you glad I’m not the only one who was like uhh okay and what did drawing the lines do??
I came to see this video too late and now I'm afraid to explain.
Is the whole RUclips community unaware of the existence of wooden moldings?
Simply, wow. 👏🏼🤩
Excellent piece of work....
I want a cane made like this, that looks so cool
Хорошо в одно место завинчивать!
Для себя и делал.
Smart woodworking it's pretty cool looking
He spent so much effort penciling that gridwork and did nothing with it after he found out this "lathe" was garbage. This spiral wooden thing will spend the rest of eternity sitting on a Thrift store shelf. Picked up every so often, for the confused shopper to think "What the hell is this?"
I tried to make those spiral posts myself. Long ago now. You are to be congratulated for the beautiful job of it you made. It's much more difficult than you make it look too.
Thats great, what is that?
😏 I know!
A groovy piece of wood🤣
🤣🤣🤣
That was way more effort than needed for a simple task
What was the purpose of the lines he drew with the pencils? Did he use it to measure the position of the tape?
Вот молодец, круто. А на хрена она нужна? Жене подаришь?!
Вряд-ли ее можно засунуть, если только разработать хорошо
@@World-360_ Лачком покрыть, и во👍 будет😀
@@World-360_ вкручивать, спираль же🤣🤣🤣
Декоративный элемент.
Спинка кровати, стула, кресла, etc.
Другой вопрос, что тут болгарка нужна, а не шуруповёрт, шуруп сдохнет от нагрузки на любом более-менее твёрдом дереве.
Неплохо.
Как говорил Доктор, лучше плохой станок, чем никакого станка.
Не знаю для чего это, но прям сделать сахотелось😁
не шали
So you clearly have a way to turn the handle and yet you waste time using a filer to grind out the grooves
He made his own turning machine 😂
Drop the info for the beat to this. 🔥
🗑️
И что с этим делать теперь?
По-видимому вкручивать куда то кому то 😁
Тоже удивился. Сделал, а для чего?
Для анальных утех 😂
Ты уже знаешь ответ.
🤔🤔🤔
Блин, вот фантазии у людей
😁😁😁
So beautiful 🤩
Great job what did you use to hold the wood in place on both ends
Can someone explain what was the use of those lines 😂
What's the use of the whole thing?
Why the lines why the drill why use tape the world will never know
And what's the usage of it?
A woman's tool🤣
@@DaTruth1017 bruh that's definitely not gonna enjoyable then 😂
Wow what a great idea, if only there was some sort of machinery that you could use to do this withing ruining a combi drill. That would be one hell of an invention.
He made it look way easier than it is.
OK aaaaaand.....
Я так думаю что это игрушка для извращенецев 😉
"Happy birthday, babe! Here, i have a suprise for u 🤗"
Her: "Awwww, you're really know *what I really want!* Thanks honey! Love uuuu🥰"
Thanks for the hack.
на шуруповёрте с боку есть кнопка фиксации. не надо использовать стяжку.
Quem é brasileiro da laikiii "like"
👇
Lmao. You only got 4.
Não sou brasileiro 😁😁😁. Não vou deixar like
2 months ago I tried doing this and even today my mom is still making me pay their electricity bill for letting a drill spin for that long 😩
Hi what filing ball or tool did you use to have that great outcome.
Ok so you made something unusual so what is it for?
Sometimes it’s just for the sake of making something out of boredom. Sometimes it’ll give ya an idea for something useful. I do this with metal. I just don’t make videos.