Man I thought it was gonna be a bitch with the rust on my car but using that impact tool on the end of the ball joint to push it out of the clamp worked like a charm. Cheers to you and this vid.
TLDR torque specs listed in this vid: Wheel nuts - 100 ft.lbs 19mm Control Arm bolt 131 ft.lbs 17mm control arm bolt 87 ft.lbs Ball joint nut 53 ft.lbs Applied well to my 2012 soul (same ball joint) just some extra sway bar links that get in the way.
Merci. Le Gibby. I really don't know how many lol but, you could very well be right. Bonne Annees! To you too.. All the best to you and your family.. Cheers
its nice to stop diagnosing every now and again.. at the shop I work at, I have 4 apprentices under me, so I am pretty busy with all my work plus making sure that they diag properly also.. Thanks for watching Ian
The only thing i can say to that is, if you work for a manufacturer and there is a part that can fix the customers complaint for a lower cost you have to put the lower cost part on. In this case it was a 65$ ball joint or a 300$ control arm, the manufacture will cut the claim at that point and it will also bring up the cost per vin which in turn will lower your dealers ranking. Now I am not saying you are wrong but if the part is made so that the ball joint can be replaced separately then there is no danger of damaging the arm. I have done these ball joints this way for 13+ years with no issues. Is there suspension tools made to make this even safer...yes. Do I need them for this job... no. But take in mind that skill and experience is also a huge factor when doing this type of work. Thanks for watching.
@@Chaos_Dave98 that's good. Always check the cost. But when your at a dealer and one part is 50$(ball joint) and the other is 240(complete arm with ball joint) while the vehicle is under warranty. You have to take the cheaper part. Thanks for watching
You shoul never hit a ball joint with a hammer, you shortened its life
Man I thought it was gonna be a bitch with the rust on my car but using that impact tool on the end of the ball joint to push it out of the clamp worked like a charm. Cheers to you and this vid.
you are welcome
and thanks for watching
TLDR torque specs listed in this vid:
Wheel nuts - 100 ft.lbs
19mm Control Arm bolt 131 ft.lbs
17mm control arm bolt 87 ft.lbs
Ball joint nut 53 ft.lbs
Applied well to my 2012 soul (same ball joint) just some extra sway bar links that get in the way.
Awesome...Like you have done it a thousand times. (Your probably getting close) Cheers Jeremy. Bonne Annees!
Merci. Le Gibby. I really don't know how many lol but, you could very well be right.
Bonne Annees! To you too.. All the best to you and your family..
Cheers
@@JLsAutoSolution You too Jeremy. 2021’s gotta be better 😳
@@TheGibby3340 maybe after some more brandy 😂
a nice simple job for a change well done
its nice to stop diagnosing every now and again.. at the shop I work at, I have 4 apprentices under me, so I am pretty busy with all my work plus making sure that they diag properly also..
Thanks for watching Ian
The last time I replaced a suspension arm joint, I replaced the whole arm. No messing trying to knock the joint out, risking bending the arm.
The only thing i can say to that is, if you work for a manufacturer and there is a part that can fix the customers complaint for a lower cost you have to put the lower cost part on. In this case it was a 65$ ball joint or a 300$ control arm, the manufacture will cut the claim at that point and it will also bring up the cost per vin which in turn will lower your dealers ranking.
Now I am not saying you are wrong but if the part is made so that the ball joint can be replaced separately then there is no danger of damaging the arm. I have done these ball joints this way for 13+ years with no issues. Is there suspension tools made to make this even safer...yes. Do I need them for this job... no. But take in mind that skill and experience is also a huge factor when doing this type of work.
Thanks for watching.
@@JLsAutoSolution i work in a spare parts shop, the joint was 45€ the whole arm 70€ from febi. Nobrainer, i took the arm
@@Chaos_Dave98 that's good. Always check the cost. But when your at a dealer and one part is 50$(ball joint) and the other is 240(complete arm with ball joint) while the vehicle is under warranty. You have to take the cheaper part. Thanks for watching
Thank you!!!
You're welcome!
Why the blurry section there at the end?, made watching very difficult tbh, but I appreciate the information provided, very useful.
Likely license plates
How long it take?
this is roughly a 1 hour job if you have a hoist. but times could vary and things can go wrong.
always practice safe repair techniques.
should never hit a ball with a hammer. also, why didn't you just put it in the vive ti put the new one in?
No con golpes
Mmmm those arms!! Where can I get me one
This video is not for a 2018 Kia Rio
follow the shop manual same procedure in alldata(which gets its information from the manufacturers) torque specs are the same also.
i have sent you a email