AmFilm Galaxy S23 Ultra Tempered Glass Screen Protector With Liquid Adhesive
HTML-код
- Опубликовано: 22 фев 2023
- Buy on Amazon
AmFilm glass protector w/ liquid adhesive - amzn.to/41YcEnc
Thanks for watching!
Follow me on
Instagram - / hightechcheck
Twitter - / hightechcheck2
Facebook - / highttechcheck
Subscribe - / hightechcheck
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the Amazon product links, I’ll receive a small commission. This help support the channel and allows me to continue to make quality content!
@SamsungUS @Samsung #galaxys23ultra #galaxys23series #galaxys23 #galaxys23plus #samsunggalaxys23ultra #samsunggalaxys23 #bestandworst 
Наука
Just put mine on my S22 Ultra last week. Best protector and best installation I've ever used.
Just Installed it and it was perfect.
1st note is to cure for 35s for the first cure, without the weight.
2st note is to watch tech-matte official instructions video while watching this, too.
Thank you for this video.
I'm a big fan of amFilm Sceen Protectors and have been using them for years but they can break and/or get chipped edges as time goes by and need to be removed and replaced. That said... using a Gel and UV curing light to afix the glass to the phone sounds a little to permanent for my liking.
Great content. You say it's case friendly? You should try it with the supcase unicorn beetle pro and see if it doesn't lift. I used the Amfilm glass screen protector for my note20 ultra and everytime I'd put it in a supcase unicorn beetle pro or poetic spartan or otterbox defender pro, the screen protector would lift, and it's not just Amfilm it's every Glass screen protector I've tried. I guess it's because these cases give such good lip protection that they reach farther on the screen than most cases. So I went with Amfilm elastic skin screen protector. No problems with any of the cases I mentioned. And add another case, I-Blason Armorbox.
I'll 2nd this .. Whitestone has been my go-to for years. No issues at all with any of those cases until I got the s23 ultra. Now every single one of them causes any glass protector no issues at all with any of those cases until I got the s23 ultra. Now every single one of them cases you mentioned causes the Whitestone to life. The reason I'm here on this video is looking for an alternative. But you answered my question and told me what I needed to know.
Hi. I really need some advice, I hope you will reply. I think I got some adhesive in my s23 ultra phone's top speaker. I cleaned a bunch of glue with a sharp blade. Still I can barely hear anything. What should I do?
I have same issue note 20 ultra as well l, I call Samsung to fix it
Your videos are amazing. I really like it. I am a new subscriber to your channel. Can I talk with you Techcheck?
Thank u
i dont know what glass i take 😢this or whitestone 😢
Thank you so much for this review!! I had been waiting for this! How do you compare this AmFilm to the Whitestone this year? Really appreciate it.
Thank you for your support! They are pretty much equal this year. I recommend both in my best and worst video. I’d so go with whichever is cheaper at the moment.
Can I put s22 ultra's one to my s23 ultra?
Подскажите пожалуйста или скинте ссылку на данное устройство что бы его купить заранее при много благодарен 😃😃😀
Please tell me or send me a link to this device to buy it in advance, thanks a lot 😃😃😀
these tempered glass on s23 ultra always find a way to get lift up, especially spigen cases are so tight that if u not install the tempered glass in the exact location when u put in the spigen case it will lifet up one of the corner, and also the side of the tempered glass always collect dust like crazy, especially early stage after installing while the glue just got dry dust will stick on the side and accumulate like mad then u start wanting to clean it and it's high probability it will lift up one of the corner, i bought tempered glass twice already in like 2 gays gap cuz of this bullshit, so in the end i just install hydrogel screen protector
So I ordered this on the way, what is your fav SP so far, the liquid or the non...
I always use the glass protectors and for the curved screens liquid is a must. My goto is either the amfilm or the Whitestone dome.
Dear sir, is the upper ear speaker safe during installation, so that no adhesive gets into it. It is a big deal to be messing with a very dear phone. Please answer.
Can you please answer.😂.
Can you please answer.😂.
I would also put sticker on the top speaker
As somebody that made glue go into it yesterday, highly recommend 💀
😖
@@HighTechCheck It's fine I cleaned it lol
Thanks for the video. Funny thing, amFilm tech support recommends this video. I think they owe you some dough! 😂
Really?? That’s awesome! Lol thanks for letting me know Melissa, thank you for your support as well.
Some people report it initially fitted well but peeled off after some days... I'm not taking the risk.
Are people slow, obv if something has rounded edges nothing will stay perfect, dust, dirt etc will get under the curve and separate it from the screen.
Their instructions are terrible. 15 seconds is not enough time to set the protector and remove from tray. I brought 2 sets of these and got a free replacement and ended up with bubbles. The time I didn't my case pushed up the edge. Got whitestone dome instead.
Agree on this. On the first cure, before taking it out of the holder, I go about 30 to 35 seconds. Learned the hard way with the first install that the 15 seconds isn't enough and the glue barely sets.
So is whitestone dome better than amfilm? I'm looking for one of these for an s22 ultra. But I don't know which to go for.
@SaintJC whitestone hands down is much better than amfilm. The amfilm glue is very runny and my screen protector ended up adhered to the alignment guide.
Is it easy to take off of the screen?
I've been using AMFilm glass screen protectors for many years on various phones and have always loved it. However I'm having a lot of issues with the S23 Ultra screen protector. It was fine the first 4 days, then on day 5 it developed a couple of large bubbles right where the finger print sensor is, making the sensor useless. Then each day after that it would show new bubbles on the sides near the volume and power buttons, then on the left edge as well. Using it with a Spigen Tough Armor case. I've used same model case and AMfilm protector on a previous S20 Ultra for 3 years without issues. AMFilm is blaming the case. So I tried a half dozen other cases. They all seem to cause the edge to get bubbles after a few days. Even without a case, the finger print area will develop bubbles after a few days, making the sensor useless. (Won't recognize finger prints and can't register new prints).
Very disappointed with the AMFilm screen protector for S23 Ultra.
I’m really sorry to hear about your experience, I’m going to put another protector on my phone and try it. I’d really hate to recommend it if it’s having issues like that.
Remove the metal piece after 30 seconds before you cure it. He cured it with the metal piece still on so the glue didn’t cure correctly with the rest of the adhesive.
I've been using their glass screen protectors for years as well and day 2 of this one on my 23 ultra the bottom edge and the top right corner started to separate. 😖
Bummer mine only lasted 24 hours, twice! Ugh!
first one I put on, it got in my S-pen slot and now my S-pen is stuck. tried another one, used the stickers to cover up stuff, adhesive still got in my power and volume buttons. they really dropped the ball with this one. the Amazon reviews are accordingly overwhelmingly negative.
I’m sorry to hear that, I haven’t had an issue with amfilm . Was it just the issue with the liquid leaking or was the protector not good either?
what about the Whitestone Dome?
This is not worth it. Guess what, ive gone with 12 of these with the revised version. Perfect installs with all 12 but it always lifted up after an hour, a day, or a few days. Not worth it in my opinion. Excellent tech support though.
Ohhh what are you doing what are you doing
I'm sure I'm not the best at these but this is ridiculous. I've gone through 7 protectors in 2 days.
I brought these aswell as the imbzbk. I like that the imbzbk is full display bit still worked with my cases. However there glue is ridiculous it leaked all over the bottom of my phone every time and trying to removed it effected the glass.
I tried these and while there alot better all 3 left a odd brushed effect on my display.
I've used Whitestone done before with no issues but thought they was a bit over priced.
Think I'll go back to film protectors.