0 IQ LEGO INSTRUCTIONS

Поделиться
HTML-код
  • Опубликовано: 7 янв 2025

Комментарии • 712

  • @SpitBrix
    @SpitBrix  2 года назад +145

    Go to www.buyraycon.com/spitbrix to get 15% off your order!
    👍 *LEAVE A LIKE if you enjoy the video!*

  • @RebelliousRobot
    @RebelliousRobot 2 года назад +1378

    The Ferrari one is definitely reasonable. And the inclusion of a small container of pins for 80036 is clever.

    • @implayingrobloxandwht
      @implayingrobloxandwht 2 года назад +2

      Where

    • @VortexBricks
      @VortexBricks 2 года назад +14

      Replace the 36 with 85

    • @camtron1967
      @camtron1967 2 года назад +3

      @@VortexBricks lol

    • @TH3HY3N4
      @TH3HY3N4 2 года назад +17

      But then he couldnt do the clickbaity 0 Q LEGO INSTRUCTIONS!!!!!!1111!!

    • @patrickdix772
      @patrickdix772 2 года назад +6

      The succulents set has a similar thing. One if the individual plants just lifts off to reveal a compartment to store the red axel pieces that you can use to hold the individule pots together.

  • @satibel
    @satibel 2 года назад +749

    Also probably for the printed piece in the ferrari, it's cheaper to not put an extra line of bricks into the box than to print on all of them.

    • @mx2000
      @mx2000 2 года назад +31

      Also Lego always includes one extra for 1x1 pieces. So choosing a blank plate here would mean adding another blank one as extra.

    • @YannickFilms
      @YannickFilms 2 года назад +1

      💯

    • @riskyworks
      @riskyworks 2 года назад +5

      Yeah. There's always one extra, so by only having the printed ones, they dont have to produce another extra. And it's not like you're gonna see that it ahs the print when you're done. It is fully covered up

  • @pinkertonbyweezer
    @pinkertonbyweezer 2 года назад +686

    3:08
    I know Lego is well known for sometimes overpricing their products, but I don't think including an overpriced set of earbuds even counts as a mistake.

    • @omniscientbarebones
      @omniscientbarebones 2 года назад +20

      Now that’s funny

    • @blackbutter6404
      @blackbutter6404 2 года назад +5

      LMSO

    • @MDG509_
      @MDG509_ 2 года назад +37

      4:02 I think we have very different ideas of balanced sound… they sound like someone made a speaker setup with 17 subwoofers.

    • @xXYannuschXx
      @xXYannuschXx Год назад +1

      @@MDG509_ Saw a honest review on those things and the low range on these things is 10dB louder than the mid and high range.

    • @thebigcheese8715
      @thebigcheese8715 Год назад +4

      Atleast they ain't as overpriced as airpods/every apple product

  • @lexdepauw9706
    @lexdepauw9706 2 года назад +342

    After rebuilding LEGO from the 80s and 90s, I noticed how the new set instructions are insanely easy and long with sometimes 2 or so brics to set. While in the 80s you got 10 or so bricks and had to have an engineerkng degree or be Sherlock to fit them, failing and only realising it a few steps later. But it was such a gratifying process and it didnt take 100 to 500 pages to do.

    • @matzebob
      @matzebob 2 года назад +15

      In that case you should be delighted by the trench run set instructions, barely any markings and often 5-10 pieces per step. Really enjoyed that one

    • @fortnitesexman
      @fortnitesexman 2 года назад +5

      building the hogwarts castle sometimes feels like a page of where's waldo

    • @fortnitesexman
      @fortnitesexman 2 года назад +1

      tho honestly, the pages i've seen so far have almost always been completely reasonable with the amount of stuff it tells you to put on at a time, i just wish all of them had the outlines for the bricks

    • @theplymouthsb70jacob2
      @theplymouthsb70jacob2 2 года назад +2

      Fright knights from the mid 90s was basically a spot the difference puzzle. Just two pictures and a list of 10ish parts. Where as technic from that time already had the outlines and arrows for new parts

    • @cornishalps9870
      @cornishalps9870 2 года назад +2

      You should try building the ucs imperial star destroyer

  • @ironbloodbricks8715
    @ironbloodbricks8715 2 года назад +326

    The Typewriter is that way because you don’t put it all together right away but you need it to be built already when you get to different set. It will make sense if you ever build it, which I recommend, great build.

    • @mycazglinski2302
      @mycazglinski2302 2 года назад +7

      I finished that build last week. It's such a clean looking set.

    • @mycazglinski2302
      @mycazglinski2302 2 года назад +23

      @@Drion086 it doesn't have ink or anything, but the keys can be pressed and they trigger movement on a few gears that slides the cylinder.

    • @Wendy_O.
      @Wendy_O. 2 года назад +4

      I had such a good time building that, but for me the real fun started when most of the inner mechanism was done and I could figure out how everything moved together to make the thing work. It was great because of how clever it was, and the fact I did everything correctly (and I did make a few errors along the way, which I had to fix). 😆 And to anyone who ever used a manual typewriter, buy this and build it; you'll be glad you did.

    • @davidvandersterre
      @davidvandersterre 2 года назад +1

      If I'm not mistaken it is actually that way to increase sturdyness once the mechanism is complete. If it is the wrong way around the chance to accidentally jump over a 'symbol' and and activate the mechanism twice or more with a single key press is significantly higher. It's because one side of the "gear" (or shredder or whatever you may call it) has a more smoothly rounded side, while the other side ensures that the mechanism gets stuck enough.
      It's not that hard people: they chose that single element because of its shape, it can "catch" other elements.

    • @ZeroIsMany
      @ZeroIsMany 2 года назад +8

      The pile is also a nice and easy to understand visual cue to set them aside for later.

  • @marioelenes5808
    @marioelenes5808 2 года назад +138

    Regarding the typewriter:
    I suppose the reason they ask you to bunch them up is to clarify you don't have to actually lay them out properly. Once you start building the mechanism, you're gonna have to drop those pieces one by one into axles. If they had shown them laying in order, I would assume a good percentage of people would painstakingly do so thinking they're gonna be joined like that or whatever. Plus, they're quite unstable on their own.
    And as for the clickbaity thumbnail, that spinny boi is the most essential part of the mechanism. It's what allows the whole thing to work as a typewriter. And it's very, very easy to put it in the wrong way without noticing, which would break the functionality.

    • @davidvandersterre
      @davidvandersterre 2 года назад +16

      Luckily someone who actually understands logic and why Lego would emphasize on a very important part of the mechanism.
      For people who still don't understand:
      Every time you press one of the keys on the typewriter an entire part of the typewriter (visually, and actually also very realistically) jumps back a little bit, so it can move over one piece. If you place on the element wrongly the chance that you jump over more than a single key is very high, because of the smooth side, while the other side kind of has a 'tooth' to catch the big part again.
      If you still don't understand I recommend you go and watch someone building the Lego typewriter. I think it is not a 0 IQ step, I think it is one of the most clever building step put in a Lego set.

    • @nickuzelac8385
      @nickuzelac8385 2 года назад

      😂😂😂Jumbled mess!! 4:45

  • @salomonolvera2143
    @salomonolvera2143 2 года назад +72

    1:14 for those of you who don’t know, that is from the Star Wars Poe Dameron’s X-Wing.

  • @DJPastaYaY
    @DJPastaYaY 2 года назад +26

    3:05 Best transition to a sponsor ever :)

  • @ryanmackenzie7651
    @ryanmackenzie7651 2 года назад +75

    5:18 Lego Technic Campfire. My favourite lego set of all time! 😂

    • @teacray9068
      @teacray9068 2 года назад +3

      I hope someone take the instructions to litelarry and make a campfire of it.

    • @২eonix
      @২eonix 2 года назад +1

      I cant stop laughing 😂😂😂😂

  • @onewaytochrist
    @onewaytochrist 2 года назад +61

    That first one was just golden 🤣

    • @AdiR9234
      @AdiR9234 2 года назад +3

      Lol agreed

    • @dudeurodude3845
      @dudeurodude3845 2 года назад +9

      Probably the guy who made that step just wanted you to take a second to appreciate the build>

    • @dudeurodude3845
      @dudeurodude3845 2 года назад +1

      @@tfolbrix2879 poor Lego instruction maker going through some rough times…

  • @handsomehansonisdacongming
    @handsomehansonisdacongming 2 года назад +27

    For the “campfire” one, I actually know why is it like that, because I have the typewriter set. The pile actually doesn’t mean what, it just mean that you have to put it away for some time, and it will come to use later.

  • @theneoreformationist
    @theneoreformationist 2 года назад +7

    5:44 I'm pretty sure those "campfires" are so the person reading the instructions knows to make multiple builds, rather than overlooking the "9x", which is incredibly easy to miss.

  • @2Dtube1
    @2Dtube1 2 года назад +16

    I get the piling one, it's so the instructions are more specific on "group these parts together so you don't get them mixed up". Lots of more "lego" styled way of instructions could be argued here, but I think piling them up gives a better idea with 3 dimensional shapes than having them all lined up with one angle of the piece (or variants of neatly placed pieces). Having them all in one angle might not be the easiest to discern for everyone and I think this improves accessibility for more people who might have trouble with spotting the difference.

    • @alexemr7
      @alexemr7 2 года назад

      You are the closest person to say something near this day XD

  • @woah6638
    @woah6638 2 года назад +13

    With the typewriter they put them in piles because we don’t use them yet we use them later on. and they dont want use to mix them up

  • @Rock4896
    @Rock4896 2 года назад +51

    The piles were probably trying to tell you to keep the parts sorted in their own piles, so later on they are easier to find

  • @Corvus__
    @Corvus__ 2 года назад +34

    Maybe the steps where you remove parts are included because some of the parts attached in prior steps were just there for temporary structural support and/or to make building it easier?

    • @the_great_magicman1877
      @the_great_magicman1877 2 года назад +9

      in a few builds ive done, they use spare parts to make sure steering axels are aligned, which you then remove for the astetic part of the build later on, its just a quick and easy time save on top of making assembly fool proof

  • @dr.virus1295
    @dr.virus1295 4 месяца назад +1

    My gosh, the first set, the Lego Star Wars Imperial Shuttle, I had that as a kid. My god man, the memories I just got hit with, damn, those were better days.

  • @CaptBlock
    @CaptBlock 2 года назад +19

    When Kai found Raycon earbuds I was so utterly confused until you said it was sponsered.

  • @Higgway
    @Higgway 10 месяцев назад +1

    Designer: creates an instruction with a good move to organise lego details
    RUclipsr: *absolutely roasts his ideas*

  • @crazybird199
    @crazybird199 2 года назад +22

    1 is definitely the best campfire because it has brown in it. Brown in a campfire usually means wood, so it would burn the best. Besides, 4 is just pathetic.

    • @isisbarfuss558
      @isisbarfuss558 2 года назад +1

      No, number 2 looks to be a better potential campfire, as it is piled in a more correct way: many of the "sticks" are angled upwards, making a "triangle" shape, which helps the fire to flow and rise.

    • @crazybird199
      @crazybird199 2 года назад

      @@isisbarfuss558 A very good point, I should have considered that.

    • @neoleonor2713
      @neoleonor2713 2 года назад

      But the fire won’t last long as the brown one.

  • @Gizmos_and_stuff
    @Gizmos_and_stuff 2 года назад +50

    Also the 2007 landing shuttle had a step where you remove pieces, my brother got and old used one and that step was weird, but the puces removed were added temporarily for stability’s

  • @BrickBusterVideo647
    @BrickBusterVideo647 2 года назад +16

    4:17 when the sponsor ends

  • @LEGOCOOKING
    @LEGOCOOKING Год назад +22

    You never fail to impress us!

    • @Velixity.
      @Velixity. Год назад

      Hey man! I used to watch your videos so much back in the day

    • @GRACE-PLAYZ
      @GRACE-PLAYZ Год назад

      @@Velixity. me too

  • @bakzkndd
    @bakzkndd 2 года назад +13

    1:14 this mistake is also in the new 400$ loop coaster set instructions, though I don't remember which step exactly, but the steps were swapped too just like that, which is kinda bad for a 400$ set

  • @amythistfire5042
    @amythistfire5042 2 года назад +5

    That ad transition was amazing.

  • @florm9944
    @florm9944 2 года назад +5

    About the Typewriter instructions, those pieces are meant to be the bits that hold the keys out so you can press them, and they are put in a pile to show that they aren't needed for a while after building them because you then have to stack them on top of each other when putting in the keys.

    • @oldvlognewtricks
      @oldvlognewtricks 2 года назад

      Clever that they show them heaped chaotically, so you don’t go arranging them carefully thinking that’s part of the build

  • @gosigrattagosigmus8510
    @gosigrattagosigmus8510 Год назад +1

    6:38 - It makes sense. It was supposed to show the texture of the wall.

  • @_dumplingd
    @_dumplingd 2 года назад +1

    us:
    plie of lego techinc things
    spitbrix:
    lego technic campfire

  • @RRGreiner
    @RRGreiner Год назад +1

    The piles are to signify that you will need to use the parts later and that they should be kept together

  • @brent2485
    @brent2485 2 года назад +1

    The Stranger Things instructions in the intro uses 3 plates to avoid confusing a 1x4 brick with the 1x4 snot brick that is used in the same step.

  • @victoriaevelyn3953
    @victoriaevelyn3953 Год назад +1

    Sometimes I think some building techniques are there just to increase the peice count

  • @GarryDumblowski
    @GarryDumblowski 2 года назад +16

    I remember once getting a set that was supposed to include a 1x1x1 brick with a clip on the side, but there was a special page included inside it that said "wait actually we messed up, substitute that particular piece for a 1x1 plate on a 1x1 plate with a clip on a 1x1 plate" basically. I don't know if it was our specific copy of the set or if it was every single instance of that set.

    • @JeanDeaux666
      @JeanDeaux666 2 года назад +4

      I got something like that in a lego police car when I was like 9 years old

  • @HeroOfTime-wj7yl
    @HeroOfTime-wj7yl 2 года назад +9

    the technic one with the lego typewriter makes sense to me, I presume in that step you are setting aside the technic pieces to be used later but assembling them ready at that step

  • @camtron1967
    @camtron1967 2 года назад +11

    I got the LEGO UCS millennia falcon. There are multiple times where you need to build massive structures twice and sometimes you need to build 2 parts for one of the 2 structures meaning you need to build 2 for one so you really need to make 4. You also need to make 6 landing gear at the same time. The set is great but is is annoying to build huge things multiple times at the same time.

    • @scottthewaterwarrior
      @scottthewaterwarrior 2 года назад

      Hope the warned you at the beginning at least. Lld LEGO sets tended to have you build something over multiple pages _then_ hit you with a 4x only at the end.

    • @camtron1967
      @camtron1967 2 года назад

      @@scottthewaterwarrior it does warn you.

  • @Beyond_xp1
    @Beyond_xp1 2 года назад +6

    I love your videos you’re my favorite Lego RUclipsr

  • @morsecoder7452
    @morsecoder7452 2 года назад +7

    I was just finished the new Thor's hammer Lego set when I was watching this, and similar to the three 1x4 plates, stacked together, on step 52 of the Thor's Hammer manual it says to have a 2x3 plate, put two 1x2 tiles on the two ends, put two pin holders in the middle, and put two 1x3 upside down tiles with a hole at the middle to attach to the pin holders, which make the exact same shape as a 2x3 brick. I was thinking that it might be useful later, but the later manual covered it up with several 1x2 brackets, which made the hard work of making this small 2x3 brick useless

  • @MRFLAPPYTREE
    @MRFLAPPYTREE Год назад +1

    its pretty obvious why they tell you to keep the unfinished pieces in a separate pile. i really dont think that part of the video needed like 2 minutes repeating yourself lol

  • @collinsfamily6819
    @collinsfamily6819 2 года назад +11

    6:28 the best for a campfire is the first one because it has a lot brown and orange

  • @CyberCrosswise
    @CyberCrosswise 2 года назад +4

    The same technique as mentioned at the timeline 8:08 was used in the set 70831. In the house model, we have eleven Technic Axle Pin hidden in a rocket that will be used in the second model: The rescue rockett.

  • @MyZimeCharts
    @MyZimeCharts 2 года назад

    I think the reason why lego makes this campfires is that lego will symbolise you should make a bunch of Lego pieces that you need later. But it's still unnecessary.

  • @nachtelfirokese88
    @nachtelfirokese88 2 года назад +2

    I dont get the problem with the Piles on the Typewrite one! You have to build them and put them aside before you add them all together , propably in step 59 , because step 60 allready show the complete thing with those parts.
    And I dont even have this Kit and understand it!

  • @max-brix6920
    @max-brix6920 2 года назад +9

    Yo SpitBrix, I’m planning on making my own Lego channel, most of my inspiration came from you!

    • @goatsquad334
      @goatsquad334 2 года назад +1

      Good luck remember me when you become big

    • @mosqit4324
      @mosqit4324 2 года назад +1

      top 10 people who asked:

  • @theburgerman
    @theburgerman 2 года назад +1

    Either 1 or 3 would be the best fire, they both have a decent enough structure while still allowing adequite airflow.

  • @loganhaslett883
    @loganhaslett883 Год назад +1

    I didnt see anything wrong with the type writer one, they were just trying to make sure people put the thing correctly facing that right way and not the opposite way

  • @Devlin20102011
    @Devlin20102011 Год назад +1

    I think the pile is just to make it clear you have to make 9 and should have a lot of them. When I was a kid I definitely missed a few “2x” etc. a few times and had to go back when I realized I was missing it.

  • @teamcyeborg
    @teamcyeborg 2 года назад +1

    The technic campfires also must have been WAY MORE ANNOYING to model

    • @teamcyeborg
      @teamcyeborg 2 года назад

      (Also, #2 would make the best campfire)

  • @BD-69
    @BD-69 2 года назад +6

    7:00 for detail

  • @Rumu11
    @Rumu11 2 года назад

    I also really like the ship in a bottle's instruction of "just pour like 300 1x1 studs into this"

  • @whatthemodsfor2496
    @whatthemodsfor2496 2 года назад +7

    9:20 they are pointing in different directions so not 0 iq

  • @Spakester
    @Spakester 2 года назад +1

    2 would be the best campfire cause it looks like it already has some fire

  • @SamManVR
    @SamManVR 6 месяцев назад +1

    In the pac man set you have to take off a huge technic rod with bricks on it it was there for support

  • @MajesticPotato501
    @MajesticPotato501 2 года назад +2

    In the mandalorian & child brickheadz, some pieces are instructed to be put on the legs, but they never appear actually on the build in the book until randomly they appear on it with no further instruction.

  • @shuaglenn6802
    @shuaglenn6802 2 года назад +1

    @5:55 as a CAD/GIS user I bet that's exactly what happened haha. Always trying wacky new display methods or design schemes for no good reason other than it was something new I figured out and I thought it could be cool. I'm sure the clients are just as confused... and me like "yeah I got bored so.. you get chaos "🤷‍♂

  • @Orangesaregood23
    @Orangesaregood23 Год назад

    That was probably the smoothest ad transition ever😮

  • @palosnes3147
    @palosnes3147 7 дней назад

    The 2007 Inperial landing craft step was to add your minifigures, since they are the only thing different from the previous step

  • @jackpfefferkorn3734
    @jackpfefferkorn3734 2 года назад +4

    I built the Ferrari set a few weeks ago, and I did have a moment of "Oh, crap, I need a printed piece here but i think i used it earlier" but then I realized that all of the red 1x1 tiles were printed and all but 2 of them are hidden, which is how it's supposed to be.
    I actually got that set for my dad as a birthday present; he's a big car guy and a fan of Ferraris in particular. Turns out he had a model of that exact car when he was a kid! He let me assemble the Lego version but I had him apply the stickers, because I didn't want to risk messing them up on his set.

  • @VortexBricks
    @VortexBricks 2 года назад +1

    The first pile is def the best campfire

  • @BellBOYd128
    @BellBOYd128 7 месяцев назад

    The typewriter instruction makes sense since you don’t want to mix up the lengths with each other but you also need them one beam at a time. The alternative would be 26 extra sub assembly duplicated steps between the rest of the front third of the kit.

  • @not_ur_dad6830
    @not_ur_dad6830 2 года назад +1

    It's funny how the most replayed part of the video is at the end of your sponsor

  • @GuyApollo
    @GuyApollo 2 года назад +10

    The only thing I can come up with regarding the 'piles' is the designer sought to show the part from alot of angles. So they piled them up and drew what they saw.

    • @mro4ts457
      @mro4ts457 2 года назад

      Or they needed to beef up the piece number for the set, for some reason 🤷‍♂️

    • @davidvandersterre
      @davidvandersterre 2 года назад +1

      I think the piles mean to say that you don't need all of them yet, and you can lay most of them on the side for now. But they will come back in sooner steps.

    • @mrmunk0068
      @mrmunk0068 2 года назад

      @@davidvandersterre thats exactly how it was

  • @ryszakowy
    @ryszakowy 2 года назад

    my favorite one is when instructions transferred 2x2 into 2x3

  • @TeddyBarefoot
    @TeddyBarefoot 2 года назад

    That sponsor placement smooth, well played.

  • @nicoleslayback1826
    @nicoleslayback1826 2 года назад +2

    No one gonna talk about how smooth he did the sponsor?

  • @Kazmahu
    @Kazmahu 2 года назад +1

    I have a hunch what happened with that first one. When the kit was being build/playtested, they swapped something out, changed the order of pieces going down, or merged a couple of steps into one action. But that happen right as the set was about to go to production (and goodness knows anything licensed can be on a pretty inflexible deadline) so with half an hour before the manual went to print the only thing to do without breaking the layout and page order was to turn the step into a no-op and just leave the templates in.

  • @bramman09animates
    @bramman09animates 2 года назад

    Wow that transition to the sponsor was smooth

  • @Sussycometre
    @Sussycometre 2 года назад +3

    Good job you've done another amazing video

  • @ecosystemdestroyer3426
    @ecosystemdestroyer3426 2 года назад

    as someone who grew up with mega blocks and not lego, removing blocks is extremely common

  • @GreasyPhil420
    @GreasyPhil420 2 года назад

    I genuinely chuckled at that sneaky raycon ad 🤣

  • @bsdaantje2852
    @bsdaantje2852 2 года назад +2

    Hey spitbrix! Are you gonna make a video where you give your thoughts about the new Ninjago sets for crystallized?

  • @hankmorrison269
    @hankmorrison269 2 года назад +1

    Cool lego video

  • @lilsprugga
    @lilsprugga 2 года назад

    Interesting collection!👍

  • @SomeRandomGuy556
    @SomeRandomGuy556 2 года назад +1

    Hello SpitBrix!

  • @Falloutgamer347
    @Falloutgamer347 2 года назад

    Now thats a good way to do the sponsor, didnt skip it just for that

  • @cmilkau
    @cmilkau 2 года назад +1

    The campfires might be related to how a real typewriter is assembled. Maybe it was a deliberate choice to recreate that experience.

  • @RickyWasntHere_
    @RickyWasntHere_ 2 года назад

    1:10 Lego wants you to take a break and apreciate the set 😂😂😂😂

  • @SumUnicus
    @SumUnicus 2 года назад

    Those piles in the typewriter instruction is fantastic 🤣
    It's humour on high levels. Who does put them in a order as showed in some instructions? Maybe 1 percent of builders...
    Ok, it touch my OCD hard... And i WOULD put them exactly as the piles in the instruction 😛

  • @christopherreynolds4506
    @christopherreynolds4506 2 года назад

    Mega construx has you removed bricks off sets as well. They are used as temporary stabilizers to make the build more stable before its done

  • @crayonrando
    @crayonrando 2 года назад

    the helicarrier part is because those pieces are supports to keep the set up, so you take those pieces off at the end of the set

  • @berenzivanac3029
    @berenzivanac3029 2 года назад +2

    In the instructions of the og destiny's bounty where you add some 2by2 round tiles, you have to sticker them, but in the box with the parts, they appear already printed

  • @Songal18
    @Songal18 2 года назад +1

    Gotta say I love that typewriter instruction one XD

  • @CG-_-
    @CG-_- 2 года назад +1

    The piles are based of the instructions for that actual typewriter

  • @notmuch_23
    @notmuch_23 2 года назад +1

    Watch somebody literally recreate those _exact_ piles of assemblies...

  • @robreich1264
    @robreich1264 2 года назад

    I have one more for you - The Great Pyramid has a 2x2 round brick with an axle stuck in it hidden under the base. The axles are used to connect two pyramid sets into a whole pyramid.

  • @dicloniusgames
    @dicloniusgames 2 года назад +2

    I didn't even think of the Stranger Things one until just now but hearing the response from the actual creator, it does make some sense, especially as I've seen that kind of build technique in other sets where you put 2 or 3 1x4 plates on top of each other.

    • @ericpaul4575
      @ericpaul4575 2 года назад +2

      And sometimes they are done this way so that you have more verity if you break down the set to make your own builds. Same reason some hidden parts are done in off colors.

    • @oldvlognewtricks
      @oldvlognewtricks 2 года назад +1

      I was wondering if it was to allow flexibility for an alternate build for the set - I’m not sure how many sets have different configurations in the instructions, but I know that it happens sometimes.

  • @channel5980
    @channel5980 2 года назад

    I'm probably never gonna buy anything from a RUclips video sponsor, but I gotta admit that that segway into the ad was clever.

  • @PistaZOV
    @PistaZOV 2 года назад +1

    1:35 swap the pics between step 1 and 2. Easy mistake, not hard to figure out.

  • @SmuggoTheLegit
    @SmuggoTheLegit 2 года назад

    Now I like to imagine that some poor overworked dude in some basement just writing the instructions

  • @mrnavastar
    @mrnavastar 2 года назад

    In the Lego emerald night set (10194) you build two support structures near the start and attach them to the build, and near the end you remove them and use the bricks somewhere else.

  • @xXXEnderCraftXXx
    @xXXEnderCraftXXx 2 года назад +1

    Wich set had the campfires?It looks like a good set for parts.

  • @Muffin_Top20
    @Muffin_Top20 2 года назад

    Bro that sponsor was so seamless😂

  • @nicolefreeman6232
    @nicolefreeman6232 2 года назад

    I liked how you call the technic ones campfires!😆

  • @georgecook83
    @georgecook83 2 года назад

    Best add transition I have seen. Well done. Totally had me puzzled for a moment.

  • @kasperfo9207
    @kasperfo9207 Год назад

    If you don’t understand the last one, read this comment.
    The bricks removed were to keep the build stable as you are building it. It is not needed in the final build.

  • @ΓιωργοςΒουλτσιος-ω3σ
    @ΓιωργοςΒουλτσιος-ω3σ 2 года назад +4

    5:47 those are guns

  • @IsMyNameUnique
    @IsMyNameUnique 2 года назад

    that sponsor transition was smoootthhhh

  • @TackyKnacky34
    @TackyKnacky34 Год назад

    6:00 the reason why the set has those steps is because those piles appease the God legominom. If you don't complete those steps you will be cursed with forever having a obvious piece missing in all your builds. No matter how much you replace or glue, it will always vanish.

  • @grumpych802
    @grumpych802 2 года назад

    9:36 I remember 9398 Technic set having something like that. You are instructed to build a stick out of brams to allign steering portals properly

  • @Epsilons_Adventures
    @Epsilons_Adventures 2 года назад +3

    In the old giant technic plane set there was a step to where you had to put a technic axle in the side of the wing to align the flaps, and then you would have to remove it to put on the rest of the wing

  • @amielhosein1004
    @amielhosein1004 2 года назад +3

    Ninjago city gardens also makes you stack 2 2x3 plates, then place 3 1x2 plates to essentially make a 2x3 brick at the green building next to the museum. The thing is, there are the actual 2x3 bricks used for a very similar part in the build.

    • @oldvlognewtricks
      @oldvlognewtricks 2 года назад

      Does it add anything to the resulting texture? It is supposed to be a different kind of hedge or something?

    • @amielhosein1004
      @amielhosein1004 2 года назад +1

      @@oldvlognewtricks No. That part is completely hidden

    • @oldvlognewtricks
      @oldvlognewtricks 2 года назад

      @@amielhosein1004 Curious