Yamaha Jog RR 94cc Polini Big Evo - First ride - FAIL!? - Cold start
HTML-код
- Опубликовано: 28 ноя 2020
- Setup
Cylinder. Polini big Evo 94 cc
Crank. Malossi MHR BigBore
Bearings. Polini.
Ekshaust. Polini Big Evo 94 cc
Carb. Polini 34pwk.
Reed valve. Kawasaki 85cc Vforce
Ignition. Stage 6 Rt.
CVT/Variomatic Polini High speed Evo.
Clutch. Stage 6 Torque.
Bell. Stage 6 Rt.
Pulley. Malossi Or.
Belt. Malossi Or.
Gearing. Stage 6 14/41.
Gear Cover. Malossi MHR
CTV cover. Polini Big Evo
Torsen Wd. Polini.
Rims. Benelli 491
Tyres. Baddlax
Front suspension. Malossi F36.
Rear suspension. Malossi RS1
Radiator. Twenty mx.
Future opgrades
Malossi Rs 24 Rear suspension 
Развлечения
I remember when the throttle cable came off from the carburetor as I went through a puddle while racing, the RPM's went higher than 13000, it sounded terribly, I immediately switched off the key, but it didn't respond to it, glad there wasn't any traffic in front and I stopped in time to bug it off..
Sounds crazy!
What a beast!!!
Full Power Amazing
Damn thats a insame jog bro😂🔥😍
Nice bike brother cheers!
Thanks man! 👌
Nice suspension!!!
Ajib bro
Thats why a killswitch is very important. Especially when you are in traffic.
Yes, if I didn't have that killswitch, it would really suck with a stuck throttle!
@Hyacinth Behm No one gives a shit 😆
Fast and cool! What kind of modification are you doing?
it happend to me once when it was too cold,throttle just got stock.luckly it was no traffic.
How do u read the temp cht or coolant pipes
What subframe u use
My throttle on my Gilera stalker Got stuck too, then i drove into a Street Light, and smashed my leg because it was very cold and ice everywhere...😂
#Baddays 😁
What for jetting do you use with the 34 polini pwk ?
About 180 main, i dont remember exactly, but 180 - 190
Is the temp sensor placed on the cylinder head?
The big Stage 6 multimeter has the sensor placed in the head, that small stage 6 temp gauge has the sensor just after the radiator so I can watch the temp when it has passed the radiator :)
@@reimer7fpv945 what do you think about the ~40celsius and do you know whats the normal temp range in which the kit is most powerful and in safest state
40°c is a bit to low, but it's not gonna hurt the engine, around 60°c is where most Alu cylinder kits make peak horsepower. In this cold Danish weather I'll never get it to 60, but in the summer i think the two big radiators will fit perfect for this setup👍
@@reimer7fpv945 Exactly. I am not sure whether running a colder engine than normal will hurt it or not but I think you lose some power. The kit delivers its full potential at 55~60celsius. If I was you I will block as much surface as needed of the second radiator to keep the temps in range.
It's not gonna hurt it, and I'm not gonne drive it in the winter time, only a quick test a couple times, so it's fine.
When its time to go to the track again I'll block it off if needed :)
37.8 c... too cold
hej hvad hedder dækkende?
Mitas mc34 mener jeg de hedder 👍
how did you get it stripped down like that
It's just missing the rear Fearings/Plastics in this video. So thats why It looks naked, you can watch my newest video to see how it looks now 👍
@@reimer7fpv945 looks mint, i’m trying too do my RR with a 70 kit but i’m not sure what mods i need too support it so it doesn’t blow up, any suggestions?
@@trainell Most i portant thing is a high rpm crankshaft and some good bearings, and of course that it's proper put together, make sure the clearence in each side og the crankshaft when installed in the block is the same. There is a LOT of videos here on yt that shows how to do it the right way :)
@@reimer7fpv945 do you know if the 100cc aerox is any good
@@trainell Are you thinking about the 100cc Roost kit for Aerox?
hehe kom der en lille pølse i den underbukser da gassen satte sig ;) og fin jog r
Haha ja en bette en 😅 Takker 😁
@@reimer7fpv945 det kan jeg sku godt forstå, har prøvet at gassen satte sig, er ikke særligt sjovt, jeg nået ikke at trykke/hive i dødmans knappen, så fik en tur i jorden :P
Nej det er bestemt ikke rart 😁 Hvor skod, det er træls når man ryger i jorden pga sådan noget! Har brækket mit kraveben på en pitbike hvor gassen satte sig, der kom jeg 3 - 4 meter op i luften og ramte hård jord med skulderen først 😅
Lækker kølersystem 👍🏾
Tak Emil 👌👍