Build Electric Bike at Home
HTML-код
- Опубликовано: 27 авг 2024
- i use
Drill Trigger Switch
36v motor
18v battery
Amazing || PLIER Invention DIY !! never exist before
• Amazing || PLIER Inven...
Know More Subscribe here:
/ drhacker-com
Business or Cooperation
dr.hacker_87@hotmail.com
Check my Other videos :
/ @diy.invented
1 : 1 gears hurt my balls... But a nice try mate!!
What you need to do is gear the motor so it spins up to it's rated rpm at around 20 to 25 mph, making that your top speed.
What you have is totally wrong, even the motor sprocket is way oversize- you get very little power out of it and will burn it out if used very much. I don't remember the ratio I ended up with on my similar motored bike but it probably was around 15 to 17 to one (the motor spins that many times to one rpm of the wheel) for a 26" bike wheel. I put a vid up on my channel of my bike.
So he should add higher gear on the motor right?, correct me if I'm wrong because I'm about to make one
@@yahya-zr1yw He needs the smallest sprocket he can get on the motor and the biggest he can get on the back wheel- even better would be using a 20 inch set of wheels which would help the motor spin more. Remember to use V brakes or better on both ends.
@@mtwseneca ok, any other thing to mention?
@@mtwsenecalink your channel
I'm going to call this a fail
HUGE!!!!!!
Yess ur right it doesn't make any sense
LOL, I agree. Big Fail!
pig work
A better battery and you have more power
The concept is good, but the battery used won't last long enough to go far, and not sure if that motor is strong enough to use on more than flat services. Going uphill on even the slightest incline would drain the battery quickly or the motor just wouldn't have the strength. Nice idea though.
Exactly!
These motors needs 24V to 36V and consumes from 250W to 500W depending of model.
Dominic Lee You’re wrong about this.
He must be new to what an e-bike should be... thumbs up for doing it cheap or for whatever he had lying around the house
E-bikes need a brush less motor controller too not just the battery and motor. The lithium ion batteries that are used for an e-bike usually have a BMS for good reason.
Why not have a single freewheel sprocket wheel in the front...it might fit that way it won't rotate the crank + you could help the motor when going up hill
@@JimmyGresik 24Volts is most likely the lowest for an e-bike I'll give you that👍
That particular motor is a brushed motor. Needs a brushed motor controller.
I Rather buy a Bafang motor it comes with free wheels so you don’t have to pedal. Nice job but, you can’t keep your feet on the pedals.
Some information subtitles would of been useful, I'm not very good at identifying such electronical parts by site. What type of motor are you using, what vultage is the motor? And where can I get one, and what was all the other parts you used and where/how can I get them please?
Dont bother it doesnt work
Como e nome desse moto
use a large gear over the size of a plate so that it can go fast after riding the load. You can install it to the left of the rear wheel so that if the electric motor is active the bicycle pedal doesn't turn.
Not good idea...you still have a pedal rotation when you use the motor,,I think you need to improve it like put another free wheel sprocket to avoid the pedal include working while you used the motor..
You need a reducer or power transmission gear system because putting it directly to the bicycle sprockets reduces the torque and a drill battery is not enough.
may be you made another gear at the left side so that you can still neutral the pedal while you re moving 😁
Otherwise he will chop his feet 😂
Hi how are you?
Where are you from ?
yep he need to
Oui ,tes pedales devraient être indépendante,et puis ta batterie a l air trop faible
I personally tried this before even watching this video! Good idea? It's definitely a fail ,doesn't work even if upping the voltage. You're better off getting a $25 motor controller and voltage regulator!
I blew up my (drill trigger) after running it only a minute it burnt my hand through my gloves! Plus the gear sprocket is way too big no torque at all I did the same thing! Use a 12 tooth sprocket!
This was one of my own ideas, I'd like to say it was a good one but I can't!
Add about a dozen more zip ties and some of those self tapping screws and maybe a chain guard to protect your gonads
That exposed chain that close to your legs doesn't look safe. Could have mounted some where else.
Run the chain directly to the crank gives you more gear options
Very crafty but at that speed and practicality I think I’ll just walk lol
you should be using geared motor rated at 250 watts
I made a small fan using the drill speed control, it got hot as hell. Can’t imagine pushing a bicycle with it.
David Anderson I tried doing the same thing and mine blew up lol
No good the tongue of your ebike is very weak can t pedal I rate fail
Remove front chain drive so you can now use only the motor to push or add a freewheel on the front crank
Ficou uma porcaria
Podría ser mejor si le adaptaras el piñón trasero al otro lado, la idea es que el sistema eléctrico ayude al mecánico.
It would be a win if you didn't have the pedal as fast as the motor goes but unfortunately you can only go as fast as You can move your legs
Simple yet effective
it should be front wheel drive for good controll
Groan. Use a few laptop batteries 29 or so. Use an industrial motor. Say for a grinder.
“A few” “29 or so”
🤣
@@TopdogPlayz 😂
sir can you help me to list down the parts converted to electrical bike thanking you in advance
I think with the right cog set up and a decent motor attachment bracket, you could be on to a winner.
Can’t switch gears. Thankyou this gave me a couple ideas on my next build
what if you want to go fast, really fast.😨( Foot movement 😅😆)
He knows it needs a stronger battery obviously but it shows what you can do with serif you already have. I think really cool. Hopefully makes people's brain starry to think. Can you click it out of gear with the hand controls ahead on the bike? That alone would reduce drag friction etc and help especially with better battery
Run the motor on the 22th on the chainset 🤨 wtf would you run it to the rear sprocket you mad man.. cut the crank arms off 🙂👍
I would have used a charger mounted to the bike so the battery would be easy to remove to charge or to take with me when I went inside. You also need a one way bearing somewhere in the system so foot pedals don't turn when using motor. I wonder if a troling motor would power a bike for assist on hills. They are made for wet environments.
Well at least you'll get a pedal assist on this.
le plus simple des vélos électriques= the most simply electric bike
Excelent idea. Thank by share.
That is exactly what I said where is foot going to stay
I won't be getting this time back that I have wasted watching this video, this was truly shocking the guy could do so serious damage to himself if he got his legs caught. Stay safe people
chop off the chain for the peddles, parallel wire a few more batts, tick weld the peddles so they are static, boom u good
Friction drive on front wheel be better
It's moving him.. or maybe it's just the wind.. blowing?
the same system should have been on the front wheel then the pedals would not go!
كيفك
I think a Freewheel on your crank arms one on each side could solve the problem of the ghost pedaling
Great, if you are just nipping next door and its flat and your not rushed for time.👍
Hmmm, I’m kinda more interested in this sorcery more then my moped. 🧐
You can mount a flash light or something and then just be able to pop the batteries in and out like normal. No risk with loose wiring battery harnesses
Instead of going from the Motor to the back wheel with a direct-drive single gear setup couldn't you go from the motor to the smallest sprocket on your front chainring moving the other chain to one of the other two sprockets and take advantage of your back derailleur and cassette with 7 gears you could Leverage to get a lot more bang for your buck out of that like a mid Drive?
Not really fast at all but nice idea
You put the chain in top of gear, thats why the wheel wont circles fast
You must have gotten your mechanical engineering degree from Walt Disney Studios, cause this was a Micky Mouse installation. ARE YOU KIDDING ME? WTF?
Thanks for showing how and sharing that, well done!
This will only work with a single speed coaster break bike. You know, the kind your Grandad rode.
Al. Davis nope. You can mount the motor just above where the pedals & crank would be. Just remove them. Only issue will be if the chain is compatible with the motor sprocket.
NICE man i know this took a lot of time to make and it has good potential if you make another im sure it will be even better!
*Handy product. Works well.*
pues si se mira que corre, pero los pedales se mueven mientras le acelera el motor, como que no vas a tener donde apoyar los pies mientras acelera
You need a free wheel crank.
В автомобилестроении 80 лет понадобилось для перехода на передний привод.
Its gear way to high. Thats why it doesn't work. You need a motor that has a gear reduction.
And how many kilometers will a screwdriver battery last you?
Could you please share with us a rough estimate of your top speed using that configuration and estimate maximum range using that battery because the plug-and-play aspect of that battery arrangement it is very appealing to me
Top speed was about 2km/h and range will brobalbly be on a good day 90m
@@Ovesundberghhow is it tbat bad?
Appreciate what people make of themselves
creo que debiste usar un piñón mas grande en la rueda para aprovechar la fuerza y la velocidad
Use more powerful engine and more battery cells and different controller
What he needed to do what NOT use such a low gear, and I wouldn't want to take my feet off the pedals everytime I squeezed the throttle
Your voltage from battery is very low,compare to your motor,the battery is only 12volts,and your motor is 24 volts.i recommended to you is the battery is higher than the motor.keep it up man...
Não funciona. Não tem força para mover o sistema. Precisa de uma caixa de redução, que pode ser feita com peças de bicicleta
that will take a chunk out of the inside of your leg if your not careful!
il collegamento motore ruota deve essere indipendente dal movimento pedali
The bicycle is slow because he insert the chain into big sockets that cause it slow but fast on uphill
9:48 looks like 50mph speed but the true speed 9:25
Have u got to move your feet off the crank to use the motor?
Esa aplicación no tiene potencia y tiene que ponerle un rachet en los pedales para evitar que no sexadcionen cuando el motor este adcionado, es una recomendación
There's room for alot of improvements
you need ... a bigger motor and a battery
He needs ... learning how to ride bicycle
@@thebestaligirisken63 he actually need to use his legs that little motor is crying
No sirve en el mismo piñon.
. debió otro piñon al otro lado... O bien.. ponerlo en la rueda delantera... 👍👍👍
He’s using zip ties and screws to hold things on...
La idea es muy buena, namas practica un poco mas la estetica
watching this kind of stuff makes me want to learn how build build my own.
But I wouldn't even know where to start. Like what are the fundamental base knowledge required to build one lol..
Hi! Im building a similar build for my electric bike, and i have a question about your motor. If you pedal the bike while using it, would that charge the battery? I heard that motors can also be used for generators, and since your manually rotating the motor while biking and its connected to a battery, would it charge the battery then?
It would only charge the battery if you pedal without turning the motor on. However this is only possible with a brushed DC motor design (ie permanent magnets in the stator). If you use the same motor to charge the battery make sure that when it is in generator mode the electricity produced is in the safe voltage/current range to charge the battery and that it does not charge the battery with the wrong polarities
Hello what speed does it reach or how much torque does it have?
Instead of a motor what if you just attached a gear to the power drill and strapped it to the bike.
Can see he’s welded that motor on , obvs the screws didn’t hold it in place
best ebike iv ever seen
OK to waste your own time but not everyone else's time.
Regular fixies can be difficult at first but an electric fixie??? - Very dodgy!
Malísima relación de transmisión , muy poca fuerza en la salida , desperdicias energía
Es verdad podria aberlo hecho mejor se nota el despedicio de potenciA..
I found a free working 250w 24v kids scooter (batteries went dead so they tossed it out) and a free 800w 24v motor out of a chair stair lift for disabled people. Hoping to build a decent ebike for under $200 (build a 24 or 36v battery pack) A good full suspension ebike is just too expensive.
Bro try it without pedaling
В технике расчёта ты не понимаешь нужна звезда на заднее колесо 1 к 18-20 чтоб тебя потянуло бугая.
Б.я что я только что посмотрел?))))
eu gostei do seu trabalho....muito creativo e inteligente reconheso qe eu tanbem eu so inteligente.....parabens....
Gotta be a way to go electric without the peddle swinging
Моторчик надо брать с редуктором. Тогда тяги в несколько раз больше будет за счёт того, что обороты снизятся до 300-400
Wow , forward . Use higher gear reduction and higher voltage
Motor power low .not sucess ....
I was curious to see this in action but I don't watch 10 minute ad money grabbing videos, you should put notes at what time intervals the interesting info is so people can skip the boring useless filler footage so you get your ad money. thanks
Wow they should call that bike the slow mo is so damn slow it's not worth doing.
When u try your Best But u don’t succed
I'm asking myself, "Self, why are you watching this!"😁😂😆
Another wasted 10 minutes of my life... Well, not a total waste!
I did learn something!
I'm smarter than I give myself credit for ☺️😉☺️
I'll share a video soon, on how to do this correctly!👍😎
Have a good night 😁
Can you make step by step install how to
you need to charge the battery a lot though
Sul motore dovresti mettere un pignone molto più piccolo.
Get yourself two pmwdpwgddjp batteries and string them together so that you get 24 V that's what that motor used originally
Montagem errada, se é um motor de alta rotação tem que ser acoplado com um pião de 10 dentes e coroa de 50 dentes.. dessa forma que foi feita no vídeo vai queimar o motor!! 🙄
Why did you connect the motor to the pedals?