If it is asked for isometric projection, are all dimensions are converted into isometric (i.e axis length and dimensions of rectangular part of base) or only the axis length
Sir thank you very much sir. Yesterday and day before yesterday I saw your videos and today in my semester exam I have drawn all diagrams very perfectly. I am very confident that I will get 70/70 in my exam. This is because of you. Once again thank you sooooo.. Much sir
Sir in isometric projection of pentagonal pyramid I didn't understand why u have drawn dotted lines from e-a, e-d, e-o. Can u please help me to understand it clearly
Those lines are hidden lines..... In the isometric view its not visible directly as it lies behind the triangular surface. But still, i have made it to give that view a realistic appeal. I hope this clears your doubt.
Sir i want a new video how to draw a pentagonal pyramid of base side 30mm and axis height 60mm rests with base on the ground with one of the base edges parallel to VP. It is cut by a horizontal plane at 30 mm from the vertex. Draw the isometric view
Not needed..... Remember is scale is only used for iso projections and not iso view.... Watch the concept video on iso drawings..... You will understand everything
@@ManasPatnaikofficial yes, Fortunately I no longer have Ed in further semesters 😂 It was painful but you helped me get through it. I have watched all of your playlists. Here in IIT Patna you are very popular, people have profile pictures of you on social handles and competitive programming sites to pay tribute to you 😂😂 Our teacher is shit so everyone studied from your playlists only ❤️🙏
You are teaching good but when you are explaining the construction the speaking statements by you are covering the diagram.therefore the diagram is not visible properly
This is isometric view and hence we have to take true lengths. Had this been an isometric projection problem, in that case we would have to take the isometric lengths i.e with the help of an Isometric scale. Hope this clarifies your doubt
All the best 😀Do share this channel and its playlist with your friends. 1. Engineering Drawing Playlist (ENGLISH): ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing Playlist (HINDI): ruclips.net/p/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics Playlist (OLD): ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Engineering Mechanics Playlist (NEW 2023-2024): ruclips.net/p/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP 5. Mechanics of Solids Playlist: ruclips.net/p/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 6. Theory of Machines / KOM / DOM Playlist: ruclips.net/p/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 7. AUTOCAD Playlist: ruclips.net/p/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G 8. Machine Drawing Playlist: ruclips.net/p/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics. Second Channel for Hindi Audience: @btechplus Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
"THE MANAS PATNAIK LIBRARY" Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: ruclips.net/video/WG6H2pISUzQ/видео.html 2. Projection of Point: ruclips.net/video/fK4h5gM73w8/видео.html 3. Projection of Line: OLD: ruclips.net/p/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV NEW: ruclips.net/video/pzE0D-Ijxd4/видео.html 4. Projection of Plane: ruclips.net/p/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg 5. Projection of Solid: ruclips.net/p/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm 6. Section of Solid: ruclips.net/p/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v 7. Development of Surface: ruclips.net/p/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v 8. Auxiliary Plane: ruclips.net/p/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB 9. Interpenetration of Solids: ruclips.net/p/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM 10. Isometric Drawings: ruclips.net/p/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83 11. Conic Sections: ruclips.net/p/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ 12. Cycloidal Curves: ruclips.net/p/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z 13. Involute: ruclips.net/p/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa 14. Plain Scale and Diagonal Scale: ruclips.net/p/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9 15. Complete Engineering Drawing in one single Playlist: ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: ruclips.net/p/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY 2. Projection of Point in Hindi: ruclips.net/p/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH 3. Projection of Line in Hindi: ruclips.net/p/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir 4. Projection of Plane in Hindi: ruclips.net/p/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U 5. Projection of Solid in Hindi: ruclips.net/p/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P 6. Scales Hindi-Urdu: ruclips.net/p/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB 7. Section of Solids in Hindi: ruclips.net/p/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: ruclips.net/p/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0 2. Friction: ruclips.net/p/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m 3. Shear Force and Bending Moment: ruclips.net/p/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7 4. Trusses: ruclips.net/p/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7 5. Centroid and Centre of Gravity: ruclips.net/p/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p 6. Moment of Inertia: ruclips.net/p/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy 7. Dynamics: ruclips.net/p/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS Complete Playlist of ENGINEERING SERVICES EXAMINATION: ruclips.net/video/ca5IwhrCNbQ/видео.html Complete Playlist of Machine Drawing: ruclips.net/video/iFCnFUR9Gdc/видео.html Complete Playlist of Theory of Machines / Kinematics ofMachines / Dynamics of Machines: ruclips.net/video/Co4YlavCpeQ/видео.html
+Krishna Vaidya No....because this is an isometric view.. Had this been isometric projection then this would hav been made with the help of an isometric scale.....
I'm grateful for your explanation
If it is asked for isometric projection, are all dimensions are converted into isometric (i.e axis length and dimensions of rectangular part of base) or only the axis length
Sir when do we convert dimensions on isometric scale and draw with the isometric lengths ?
Isometric lengths are used when isometric projection is to be made....
And when isometric view is asked u have to use true lengths.
on 13 dec i've my EG exam.can u give me some helpful tips !?
plz do reply.!
got over huh?
Hat's off to u sir. By seeing once we can every thing.
Sir thank you very much sir. Yesterday and day before yesterday I saw your videos and today in my semester exam I have drawn all diagrams very perfectly. I am very confident that I will get 70/70 in my exam. This is because of you. Once again thank you sooooo.. Much sir
sir u have made video on isometric view.please make video on isometric projection.
Omo....ur voice is so good😁
But you have a killing smile 😃
sir this is isometric view so we need to take isoLM and not the true length of LM?
Plz explain the isometric view of frustrum of square prism
Your videos are excellent so plzz make videos on vernier scales
Sir why you donot multiply the lengths of the lines in this drawing with 0.815
Wonderful explanation
Have we want to take true length or isometric length?
1st I can't understand but now I understood tq sir 4 ur vdo😀
Thank you sir
Sir can you put a video about frustrum of pentagonal pyramid
Mm sure he ll put
Thank you sir.
First diagram will be drawn thick or thin
Sir please upload videos on oblique drawing
Sir but in primer the isometric view is different ?
NYC video .. very very helpful
Sir I want to have a drawing software like you use can u elp me with the link or any suggestion
Sir in isometric projection of pentagonal pyramid I didn't understand why u have drawn dotted lines from e-a, e-d, e-o. Can u please help me to understand it clearly
Those lines are hidden lines.....
In the isometric view its not visible directly as it lies behind the triangular surface.
But still, i have made it to give that view a realistic appeal.
I hope this clears your doubt.
Sir i want a new video how to draw a pentagonal pyramid of base side 30mm and axis height 60mm rests with base on the ground with one of the base edges parallel to VP. It is cut by a horizontal plane at 30 mm from the vertex. Draw the isometric view
Sir, then when should you use isometric lengths..?
When u have been asked to make isometric projection only then......
Incase of Isometric views use true lengths....
Sir how many methods do have for drawing isometric View
Sir did u converted the true length to ISO length in this problem??
No, thats not needed, as here we have to make the isometric view and not isometric projection.
Sir at 2:20 how can we draw that in the auto cad I didn't understand sir could you please explain sir
Sir please make video on vernier scales
why is isnt isometric scale being used to draw the solid
And thanks for your videos we really understood very well again I request you to make on vernier scales
When axis is horizontal??
Why you take the Pentagon to the vp
sir what about when its plane being vertical?
Can you make videos on sciography pls!!
What's Sciography?
Should we convert into isometric scale of. 8164
Not needed.....
Remember is scale is only used for iso projections and not iso view....
Watch the concept video on iso drawings..... You will understand everything
How to draw hexagon? Please upload a video
Final thank yyou before i go to write my end sem exam
All the very best 👋.........
Is this 1st semester exam ?
@@ManasPatnaikofficial yes, Fortunately I no longer have Ed in further semesters 😂 It was painful but you helped me get through it.
I have watched all of your playlists. Here in IIT Patna you are very popular, people have profile pictures of you on social handles and competitive programming sites to pay tribute to you 😂😂
Our teacher is shit so everyone studied from your playlists only ❤️🙏
Sir how to get the isometric projection of a hexagonal prism with a square hole at its centre
cannot be explained in words bro...
Isometric projection please.
We have make first two figs with hands.
Thanks sir 🙏
sie from top the Pentagon is seen in projection but in isometric view it is not why
Y didn't u take iso lengths??
You are teaching good but when you are explaining the construction the speaking statements by you are covering the diagram.therefore the diagram is not visible properly
Thank you
Tqq bro
Thank youui 💖
Good explanation sirrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
Sir isometric hexagonal pyramid ak video de do na
Can we have point say K or M or N instead of L
Sir thank u so much 😊👍✨
Thanx sir u r great
Sir u should take the isometric lengths , not the true length...please check once again and reply if I m right
This is isometric view and hence we have to take true lengths.
Had this been an isometric projection problem, in that case we would have to take the isometric lengths i.e with the help of an Isometric scale.
Hope this clarifies your doubt
Thanksss
All the best
😀Do share this channel and its playlist with your friends.
1. Engineering Drawing Playlist (ENGLISH): ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS
2. Engineering Drawing Playlist (HINDI): ruclips.net/p/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU
3. Engineering Mechanics Playlist (OLD): ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS
4. Engineering Mechanics Playlist (NEW 2023-2024): ruclips.net/p/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP
5. Mechanics of Solids Playlist: ruclips.net/p/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP
6. Theory of Machines / KOM / DOM Playlist: ruclips.net/p/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU
7. AUTOCAD Playlist:
ruclips.net/p/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G
8. Machine Drawing Playlist: ruclips.net/p/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w
Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Second Channel for Hindi Audience: @btechplus
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
Length L to K ?
Thank u sir
Thank u sir. Tomorrow i have a exam but my sir can't teach this topic. Your video is helpful for me
All the best.
1. Engineering Drawing (English) :
ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS
2. Engineering Drawing (Hindi) :
ruclips.net/p/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU
3. Engineering Mechanics:
ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS
4. Mechanics of Solids:
ruclips.net/p/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP
5. Theory of Machines:
ruclips.net/p/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU
6. Machine Drawing:
ruclips.net/p/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w
7. Engineering Services Examination_Engineering Drawing_Prelims:
ruclips.net/p/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU
8. Physics for Class 11:
ruclips.net/p/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM
9. Manas Speaks Series:
ruclips.net/p/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0
10. Physics Channel Link:
ruclips.net/channel/UC_aqx41HWeOebfL6FqBYU6Q
My AMAZON Store - For all you students.
www.amazon.in/shop/manaspatnaik
Sir thanks a lot
+Naina Mir
Hi Naina.....
Keep learning and keep enjoying....
Superb
Puriyala da
Sir we don't have to take length 80% of orthographic projection in isometric view
No reduction in isometric views....
"THE MANAS PATNAIK LIBRARY"
Topic-wise Playlist of Engineering Drawing / Engineering
Graphics in English
1. Orthographic Projection:
ruclips.net/video/WG6H2pISUzQ/видео.html
2. Projection of Point:
ruclips.net/video/fK4h5gM73w8/видео.html
3. Projection of Line:
OLD:
ruclips.net/p/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV
NEW:
ruclips.net/video/pzE0D-Ijxd4/видео.html
4. Projection of Plane:
ruclips.net/p/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg
5. Projection of Solid:
ruclips.net/p/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm
6. Section of Solid:
ruclips.net/p/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v
7. Development of Surface: ruclips.net/p/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v
8. Auxiliary Plane:
ruclips.net/p/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB
9. Interpenetration of Solids:
ruclips.net/p/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM
10. Isometric Drawings:
ruclips.net/p/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83
11. Conic Sections:
ruclips.net/p/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ
12. Cycloidal Curves:
ruclips.net/p/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z
13. Involute:
ruclips.net/p/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa
14. Plain Scale and Diagonal Scale:
ruclips.net/p/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9
15. Complete Engineering Drawing in one single Playlist:
ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS
Topic-wise Playlist of Engineering Drawing / Engineering
Graphics in Hindi
1. Orthographic Projection in Hindi: ruclips.net/p/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY
2. Projection of Point in Hindi:
ruclips.net/p/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH
3. Projection of Line in Hindi:
ruclips.net/p/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir
4. Projection of Plane in Hindi:
ruclips.net/p/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U
5. Projection of Solid in Hindi:
ruclips.net/p/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P
6. Scales Hindi-Urdu:
ruclips.net/p/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB
7. Section of Solids in Hindi:
ruclips.net/p/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC
Topic-wise Playlist of Engineering Mechanics / Applied
Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ruclips.net/p/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0
2. Friction:
ruclips.net/p/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m
3. Shear Force and Bending Moment: ruclips.net/p/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7
4. Trusses:
ruclips.net/p/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7
5. Centroid and Centre of Gravity:
ruclips.net/p/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p
6. Moment of Inertia:
ruclips.net/p/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy
7. Dynamics:
ruclips.net/p/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z
8. Complete Engineering Mechanics / Applied Mechanics in one
single Playlist:
ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS
Complete Playlist of ENGINEERING SERVICES EXAMINATION:
ruclips.net/video/ca5IwhrCNbQ/видео.html
Complete Playlist of Machine Drawing:
ruclips.net/video/iFCnFUR9Gdc/видео.html
Complete Playlist of Theory of Machines / Kinematics ofMachines / Dynamics of Machines:
ruclips.net/video/Co4YlavCpeQ/видео.html
No need of conversion to isometric scale...???
+Krishna Vaidya
No....because this is an isometric view..
Had this been isometric projection then this would hav been made with the help of an isometric scale.....
Yeah I have cleared my doubt
All the best brother for your exams......
Tq sir
👌👌
Master jii Yaa india ha yaha Jada tar log Hindi samjhte ha English nhi😅😅😅😅😅😂🤣🤣😂 Hindi bol k video banao ge too benefit hoo ga🤗🤗🤗
Sir plz tell another way
Add. Vtu. Questions
Pentagonl center point I don't how
Tq sir
Pls come
Puriyala, please 😨😨😨😨
Hloo
Writing likhna band karo
Use normal english..
Hi sir🙏
on 13 dec i've my EG exam.can u give me some helpful tips !?
plz do reply.!
Lol 😂😂😂
Thank you Sir
Thank you sir