Isometric View_Cylinder & Cone

[@vivek-rr5nx]

these videos just saved me from exams and made my score really high

[@ManasPatnaikofficial]

Thanks Vivek and all the best in future endeavors

[@abhishekmahapatra9069]

Thank you sir for explaining isometric projection in such an amazing way making it interesting for me and my friends as well. My college mates and my friends also enjoy your videos a lot. You have made engineering drawing interesting for all of us. Sir it's a small request from me and my friends that could you please able to make a short video on Auto CAD before our CSVTU exam on engineering drawing which is going to be held on 11th of January 2018 for which we shall be ever grateful. Sir it is a small request, from all of us because the notes and books have described it in a very confusing way. We are not able to judge the important topics. We are not forcing you to make the video but please sir if it is possible then we need your guidance. Your guidance is truly helpful for us. You have given so much knowledge to us after which we have developed a sense of confidence in us. And thank you sir for making Engineering Drawing easy. Your lectures are really helpful. Thank you sir.
Your's obedient
Abhishek Mahapatra

[@ManasPatnaikofficial]

+abhishek mahapatra
Thanks Abhishek for appreciating the content......It am sure that its helping u all.....
I cannot promise but i will try my level best to make videos on AutoCad as soon as possible..By the way, which college are you guys from?

[@ranganathd5954]

Thank you so much sir 😄🤩

[@umeshrg4921]

Loved your teaching sir

[@kondamangaliarchana6607]

Excellent explanation ! thank you very much sir

[@anupamawagh8637]

Sir u are brilliant 😍😍😍🤩

[@oneminuteanimation-uz5yb]

Great job sir

[@mahimahamsa839]

Sir ur lectures are easy to understand
Thank u sir

[@tgthirumalesh5884]

Those who are watching in 2021 just like it.. ❤️

[@im_cpk]

Nice vdo sir ji🙏🙏🙏

[@rba1aji216]

Draw the isometric view of a cylinder resting on one of its end on HP. The cylinder
diameter is 60 mm and height is 70 mm.

[@nageswarreddy9614]

Its very easy to understand thank u sir

[@itsyourronit]

Sir do also upload a video explaining drawing of a cylinder placed horizontally... Having given its front view as a circle and end view as a rectangle.
Thank you Sir.

[@jamesrohan4808]

Bro today it came in my exam
But with some change in lengths

[@ankitarya1915]

Thanks a lot sir

[@velsha2162]

Thank you sir

[@ramyaarukonda6300]

It's marvelous but based on parallel to HP and perpendicular to VP diagram need

[@rm-831]

Thanks for making this video sir

[@user-Rahulkr]

Sir. Yadi questions main circle ka isometric projection bananane bole or diameter bahut kam diya rahe to hum dia ko "2X". " 4X".........le sakte hain........

[@mainmanlobo_]

Sir...in case of isometric projection of circle is it enough to multiply the length of the enclosing square by 0.8 and follow the remaining steps?

[@MukeshchowdaryVinjam]

Is that valid?

[@gautamkpandit]

Sir how to make isometic view of a cone in horizontal please make a video in this topic please sir

[@AswajithBabuAswajithBabu]

Please do videos on perspective too..

[@guruvayurappan6743]

Thank you so mach sir

[@aniketgorule5896]

Thx sir

[@AzizulHaque-yf7ki]

Sir,plsss plss discus about how to prepare for GATE xm for mechanical.

[@rohithbharathi3664]

Sir,also do videos on perspective projection..

[@Saurabh3639]

Sir when we will drawing the isomeric views then we will have to use actual scale or iso scale

[@ManasPatnaikofficial]

+Saurabh Tiwari
Saurabh.....remember this....
1. True scale for isometric views.
2. Isometric scale for isometric views.

[@jaiteshpachipulusu6339]

2.Isometric scale for isometric projection.

[@digambarmaratha4119]

Sir while drawing an isometric view every measurement should be multiplied by 0.82
For eg.70×0.82=57.4...
My lecturer said this ...
Is this necessary ..?

[@ManasPatnaikofficial]

For drawing isometric view, use true length.
For making isometric projection use isometric length i.e 0.82 times true length

[@shubhamgurav9194]

Class 👍👍

[@gautamkpandit]

In the isometric view. I use doted line or no ? Please tell me answer sir .

[@ManasPatnaikofficial]

Gautam.....
In isometric views, you don't have to show dotted lines.

[@hemantmahajan4958]

nice sir

[@ps709]

Sir please tell which line is to be drawn dark Nd which is to be light

[@dhavneprasad6964]

Nice

[@srikanthbudati3768]

sir, this is SREEKANTH BUDATI ,issue is i passed the entire btech but not engneering drawing this is the fifth year because of the engneering drawing so please can u provide online clases it its not possible please suggest any other which help to pass drawing sub please help me sir

[@ManasPatnaikofficial]

I dont provide any online classes.
This is my channel and all students are learning.....
Watch videos of those topics where u r weak.....it will help u surely....

[@srikanthbudati3768]

Manas Patnaik thank u for responding

[@ashutoshkabir1657]

sir plz make a vedio on vernier scale asap plz plz sir

[@gowthamk187]

Thanks sir

[@vijayan8019]

sir u suppose to explain in board for isometric view

[@abhishekmahapatra9069]

Sir we are from Rungta College of Engineering and Technology R1 Bhilai

[@ankitaverma2271]

Sir cone on rectangle

[@surajpatel3043]

Upar wala rhombus kaise bnaya nhi smjh aaya

[@AzizulHaque-yf7ki]

Nica wala porsion ko as it is uopr mai draw kiya hai.thats it...broo...

[@ashirwadshukla8221]

AAO KABHI IIT(BHU) TO JAANE....

[@DjwaleySaikat]

Not to easy mode ur drawing

[@keshvalakhoda1172]

please language in hindi

[@simark1428]

Dislike kisne kia

[@civiltutorials5475]

Thanks sir

[@itsaghostlordmusical1906]

Why he taken 30 degrees bro

[@Indianboykumarrupesh]

Thanks sir