Use this REMOTE for your Next DIY PROJECT!
HTML-код
- Опубликовано: 8 сен 2024
- How to Make Simple DIY Wireless RC Remote Control Using Arduino and NRF24l01 for RC Control RC Car Boat Robot Etc.
In this video, i have made a simple DIY Wireless RC Remote Control Transmitter and Receiver
using arduino nano and NRF24l01 wireless transceiver module.
you can find a detailed explanation along with links to schematics, parts and components used, in this description below.
this wireless remote and receiver kit is made on a small PCB perfboard and is very easy to make.
i have soldered all the connections using thin wire core and solder wire.
it can be used to control many projects such as robotic arm, RC car, Drone, Etc.
it features 2 channel control which can control 4 output pins on the receiver
i have used 2 arduino nano microcontrollers. one for the transmitter and another one for the receiver.
the arduino board takes input from the joystick module,
converts it into a character string, and sends it to the receiver via the NRF24l01 transceiver module.
For the Transmitter, i have used the NRF24l01 Transceiver module with SMA antenna for enhanced range.
for the receiver i have used the module without antenna, but you can use one with antenna on the receiver too,
to get enhanced range.
i used a joystick module on the transmitter to send data to the receiver over radio using the NRF24l01.
the receiver receives the data and uses the digital pins as output to send the received data as a control signal.
the signal can be either simple on/off, or it can be a PWM output to have variable range of control.
for eg: to control speed of RC car.
on the receiver i have 4 female header pins to connect to the device to be controlled.
make sure you do not connect any high power device directly to these pins, as the arduino cannot handle currents
more than a few milliamps.
you can use drivers such as H Bridge motor drivers, or ESCs for brushless motors, to control motors.
for any other switching application you can use MOSFETS to amplify the current for large power devices.
Links:
Schematics:
Remote: bit.ly/33Uc1jg
Receiver: bit.ly/30QWy1n
Code:
Transmitter Code: bit.ly/2DDok8Z
Receiver Code: bit.ly/3kF5TRB
Product Links:
Arduino Nano: bit.ly/ArdNano
NRF24L01 with antenna: bit.ly/NrF24L01
NRF24l01 module: bit.ly/3h2jIHy
NRF24L01 Adapter Base: bit.ly/30RSJZX
Joystick Module: bit.ly/2POeovH
Perfboard PCB Board: bit.ly/31LbYDx
Female Header Pins: bit.ly/3fSD7tj
Solder Iron i Use: bit.ly/2GSArih
Helping Hand Magnifier: bit.ly/2Uh11oe
arduino UNO with Micro USB port: bit.ly/aRdUiNo
also do check out these cool 3d Printers:
Creality Ender 3 pro : bit.ly/36m1POI
Creality CR-10s pro: bit.ly/2QmqU6z
check out my channel for such cool project videos:
/ superbtech
check these useful tutorials
NRF24l01 Tutorial: • NRF24L01 Arduino Tutor...
Arduino Beginner Tutorial: • Arduino EXPLAINED
Arduino Buttons Tutorial: • Toggle/Momentary Push ...
Joystick Tutorial: • Control Servo Motor wi...
DIY 3d Printer Project: • How to Make 3D Printer...
DIY lab bench power supply: • How to make Simple Lab...
DIY portable power supply: • 3D Printed Portable Po...
DIY Power Bank: • How to Make Power Bank...
#Remote #RemoteControl #RCTransmitter #RadioControl #Arduino
esta palestra mexeu comigo? parabens!
Awesome work bro. I already have a 2.4Gh remote that came with cheapest drone I bought. Any idea to DIY a receiver for that?
自製萬歲
利害,好手工藝……!😄😄
Hi. I want to make like yours. Thanks it is awesome. Can you tell me the receiver and transmitter are able to control proportional servo steering and proportional throttle? I dont have a great budget so I want to make my own transmitter and receiver but I want to make it proportional.
Also any usb joysticks (which we play PES and FIFA etc. which have analog joystics) can be useful to make proportional transmitter?
Thanks in advance
I would like to see RC Cars
How can you detect a radio control transmitter channel signal operation strength and frequency with a meter?
Nice video..
superb
How to connected coreless motor with receiver
Make a camera car
will this work on an RC car default receiver or do I have to integrate another nrf24l01 to the rc car?
What is the range of this transmitter and receiver
About 30 meters
Super bro you can do a rc car
how is this running on a single LiPO 3.7v (4.2v fully charged) cell?
it is only led
Hey, i want to make an rc car with as much range as i can get, and i want the signal to penetrate walls. Which one should i use?
this one is great, just use two with large antennas- more expensive, but you will get large range and wall penetration. It seem working for 700m+
linear or circular movement, using a screw + bolt to open/close a window or box
enough toys, something useful, productive
Can we use Nrf with antenna
Op it was really awesome
And I will surely try
Please can you tell me which is beat website ro buy this electronic product in cheap price
Thank you. you can buy on www.superbtech.in
flyrobo
flyrobo
Hi, I could not open the sketch file, both transmitter and reciever. How to solve this issue. it prompt cannot create sketch
same
You ahve single error in your arduino script. Transmitter has CE,CSN pinned to 9,8 while in tutorial you show that it should be: 9,10. I of couse chaged it and it works fine. I bet after soldering it should work flawless, because right now it soemtimes lose signal, but cables are in breadboard, and they just probably are loose sometimes.
make car bro ♥️♥️♥️
Will this work for a drone? I'm a beginner and wanna try making a drone.
this will not work for a drone, a drone will require atleast 4 channel control
I have an old RC car, but I lost the remote. Can I make another remote for my car?
yes
Kitani dc motor conect ho sakti he
Bro it will work for all rc cars
Bro make a 2 wheel drive rc car using l298n motor driver. It will be helpful for me because I have all the hardware you used in this video and also l298n. I 'm looking for the best tutorial to make l298n rc car. So please do it for me. I really need your help. Please please please use l298n for the rc car😭
did you ever get a ans about this
Can we make connections from wires
yes you can
can we supply it with 24v?
no
Can we add buttons in it ?
yes you can
what should i use arduino nano or arduino pro mini ?
Either one works.
any one
codes not opening, downloaded but fails to create sketch.
yea i also tried but failed to open code
How many channels it have
4 channel
make a robot car
9:40
Car
but how can i use to rc car
Yes
Can I use Arduino Uno
yes you can
yes they are technically the same
Can you make this control my kid so she'll go to bed when I tell her to?
so funny
rc car
Salam BATAM
RC car
It doesn't work...
Make a robot
Robot
Rc car
Car
robot
Rc car