You guys don't rest at all, always improving your products. Everybody I know has nothing but glowing reviews about their benders and notchers, and I've experienced them up close too.
It's pretty impressive that you never seem to stop improving your bender, and creating add-ons instead of making all of these innovations just stand alone products
long long ago when I was in my long boat on the Long river I had a long dream about this new long tool. I long for the day I can get one. Thank you for your time.
Very impressive results. Now let's see the video I've been waiting so LONG for... the new double pressure roller setup, been looking forward to those for all this .083" 4130. Keep up the great work.
I just got to the end of this, and seeing the low amount of deformation is super impressive. I'll bet that folks building long hand rails will come running for this!
Long ago, in a galaxy far far away....people used to spend way too much on fab equipment. Thank you guys so much for making high quality tools at affordable prices.
I have worked with a few different types of benders and the accuracy and repeatability of them have been fair to ok. The rouge fab bender appears to be very easy to use and highly accurate , especially like the clamp blocks that allow you to remove a part and reinsert it without fear of loosening the exact index of the bend. I am a welding instructor at a technical college and we do some projects that involve some tube bending. This machine is a space saver and easily mover around the shop . I especially like that you can create bends in long lengths of tubing because the bender makes use of a vertical axis so you don't have to rearrange your shop just to make a bend in a long tube. Looks like an amazing tool
It has been worth the long wait to get a quality tool like this.. Refinement takes time but when you reach this high standard of bending, what else can you ask for.
Your tube bender has been awesome! I just finished up my Mini Bike Snow Bike project, and the bender was incredibly helpful for that! But, man, now that bike is LONG!!! 😜
@@RogueFabrication If only I could post pics here... lol You can see photos on my Instagram instagram.com/mikes.mini.motors/ or the build series will be on my RUclips Channel ruclips.net/user/MikesMiniMotors Only the first video is out ATM, but the next one will be out later this week.
Hey All, 7:11 if you redesigned the leg extension to have "hooks" on that 1st hole you could run your bolt thru & hang the extension which makes 100x easier to get the next bolt in. Or, if it's not supporting tons of weight then you could use the pivot point from the 1st to hold it out of the way long enough to run a 2nd bolt thru & allow a 2nd set of "hooks" instead of holes drip down onto it & EzPz
Heck, maybe just trailer hitch bolts would be infinitely easier for something that may not be on there often or for long. ... Unless the extension absolutely has to be bolted together tight. Have you considered using automotive quality quick disconnects to make disconnecting the machines hydraulic lines easier & cleaner to attach & remove? *This is all from a place of love, not trash talking. I think it looks like a Great product
Great suggestions. There are reasons for the rigidity we designed in with all the bolted joints. It is time consuming, but simple and super rigid. It will likely make more sense in late 2023. We may or may not be less cryptic and ambiguous about it before then. -Joe
It wont be long before I order my new Rouge Fab bender, it's a great value and quality bender. Now if it were that easy to find DOM tubing in mid Florida that would be great.
I love my ole bender. I've had it for 7 or 8 years now has always worked great. Bought the roller dies a few years later n that made it even better! Whenever asked I always recommend your gear... Long
Stoked for my bender to arrive. Someday I'll order that mandrel attachment. That thing is an enabler for sure. The ability to bend 20ft long thin wall tubes will be a game changer. Thanks
@@jasonmcnulty6029 I just checked with the amazing team in the shop. Look for a tracking number the week of the 25th. You can email me directly sales@roguefab.com for any questions about your order. -Jarrod
Received, welded, painted and assembled! Looking forward to breaking it in after a short vacation. Really impressed with the cut quality you guys maintain, the simple assembly procedure and overall design. Everything fit together like a glove. Thanks!
Looks really cool. I definitely like it..... but, I have to say. I was hoping this video was going to be about your fixture/ welding tables you were talking about a while ago. I've been waiting a long time for your design on those. Any insight on them?
like all small businesses, we've been affected by supply issues, Covid-19 and other deals that are slowing things down a bit. The welding table is still on the table. Stay tuned. -Jarrod
Its great when you can have a single Engineer (or singular team) work the entire project, along with troubleshoot, upgrades, and new development. I dont think joe ever sleeps because every time ive called or emailed he's answered, never in a rush, never push a sale or upgrade. This has become a long babbling review, sorry.
I have been following rogue fab for a long time. I have yet to buy a setup though I really would like to. I will say, I'm always surprised how large these setups look with a person next to them.
Remember a "long" time ago, you said you would give me a bender? I need a new one, I have the the old, old, old, one. And you guys keep coming out with new stuff, I can't keep up. Hahahahahaha
I wonder if the madrel system could be made in one piece or build it up and roll it into place to reduce complications of damaged components from wear and tear?
Im pretty sure it would take a novice a long time to set this up. With the added dark scenes it made it look like it may have taken two or three days to set it up in your free time. With that said, the quality is very impressive and once set up i can see some impressive food grade distribution systems benefitting greatly for no wrinkles as well as some beautiful hand rails, second to none.
@@RogueFabrication yes i do understand my son does real estate photography he also takes pictures of his two toddlers and 1 infant i see the level of exhaustion to get the shot right. You make the set ups look very simple and folks can refer to you tube for a refresher.
Y'all should make an adapter kit to convert a JD2 to run vertically and accept the mandrel attachment for those of us who regrettably bought a jd2 model 32 instead of the m625...
That is a very interesting idea! Unfortunately (in this case) JD2 dies are "V" shaped. They are mostly round in the groove, but with a slight V/parabola/etc shaped in there. They are incompatible with mandrels since they pinch the tube in the bend. They work well on most thin wall applications. What are you bending?
Been following you for a couple years now and impressed with the advancement of the bending capabilities. Do you have a 1 shot 180 degree bender in process (chain driven)? "Long"
part of being cool is looking cool. Joe requires all employees to use a specific hair product. Spiky hair for the win. Brandon has the best hair with me a close 2nd. -Jarrod
Is there any reason that the non-operator side of the mandrel extension frame can not go on first? The extensions are LONG and if the machine is near a wall, access after the fact could be difficult.
I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. Well that didny help for long i still want it. Can it only bend dom tubing?
As we grow our platform on social media, we are able to commit more resources to better video recording and audio equipment. Stay tuned for the upgrades!
Insane work!! Didn’t miss a beat
gotta have just a little crazy in ya to come up with some of the ideas floating around here. -Jarrod
You guys don't rest at all, always improving your products. Everybody I know has nothing but glowing reviews about their benders and notchers, and I've experienced them up close too.
The correct usage of "their" and "too"! Your grammar is like our tools. Perfect. -Jarrod
@@RogueFabrication he thought long and hard about that one
It's pretty impressive that you never seem to stop improving your bender, and creating add-ons instead of making all of these innovations just stand alone products
Thank you James! -Jarrod
Great video and some awesome innovation! I can't wait to put a Rogue bender in my shop.
Thanks! If you are local, you can save shipping costs and pick it up from the shop!
I've been wanting one of these benders for a LONG time!
roguefab.com has a couple -Jarrod
long long ago when I was in my long boat on the Long river I had a long dream about this new long tool. I long for the day I can get one. Thank you for your time.
thank you, thank you, thank you, thank you, thank you, thank you, thank you -Jarrod
Great bender and great customer service. I got a call back from the owner and he was awesome and very helpful with the used bender I bought.
sometimes Joe goes Rogue and fields calls.....by sometimes I mean everyday. He wears many hats. -Jarrod
Very impressive results. Now let's see the video I've been waiting so LONG for... the new double pressure roller setup, been looking forward to those for all this .083" 4130. Keep up the great work.
:D It’s been a long time since a video has made me so happy:D great work!
thanks Jamie. -Jarrod
I just got to the end of this, and seeing the low amount of deformation is super impressive. I'll bet that folks building long hand rails will come running for this!
Was thinking that same thing! Some killer end results
the deformation is lower than my checking account balance! -Jarrod
That mandrel extension makes that set up LONG! I'm impressed that it can be installed by one person.
Joe makes it look easy but I took it down alone and I am a noob. -Jarrod
Man, that was one long stick... - Her
Amazing video and cool demonstration!
I am not touching that one....-Jarrod
Very awesome design. I can't wait to order my bender in the next week or two.
available 24/7 at roguefab.com -Jarrod
Long ago, in a galaxy far far away....people used to spend way too much on fab equipment.
Thank you guys so much for making high quality tools at affordable prices.
you're most welcome! -Jarrod
Always improving your products keep it up guys 💪🏻
Will do! Thank you Paulette!
This was a wonderfully long video I was able to watch at my leisure. lol GREAT VIDEO JOE!!!!!!
you keeping watching, we'll keep making them. -Jarrod
That's a great addition to the offering. It would be long beyond my set of skills to use, but would be fun to learn. Thanks for the opportunity.
You're welcome! -Jarrod
Stoked for this to drop! Will be tuning in and sharing!
We'll see ya in 15 minutes! Thanks for the share too!
As always super impressive stuff. Long
we modestly agree! -Jarrod
shoot me an email at sales@roguefab.com I have something for you!
Excited for the tubular future guys! Very cool product with awesome results. Nice to see a LONG RUclips video going over it all!
someone used to watch TMNT. Thanks! -Jarrod
Have had my bender for three years now super happy with it would love to. See more videos posted
building benders is easier than producing videos I am told. -Jarrod
Best tube bender on the market because of this attachment.
Thank you so much, George! We love the broad range it allows the machine to bend (with top level bend quality). -Joe
That's an amazing system! Hard to believe that it can handle tube sections so long, but it does!
Right?! thank you
That custom RF alignment tool is such a cool and practical touch!
that was my idea -Jarrod
@@RogueFabrication Awesome!
Long way from TN nice video great customer service thank Joe
thanks DB! -Jarrod
Awesome product. The ability to bend a tube that long with so little deformation would be handy.
what would you use it for? -Jarrod
@Rogue Fabrication I could see it being useful for exo cages or roll cages for longer runs of tubing, like the entire profile of a vehicle.
Long extensions = long bent tubes! This is such a fantastic addition to yall's tool lineup guys, keep up the badass work! 🤘
Ya'll keep buying them, we'll keep building them! -Jarrod
I have worked with a few different types of benders and the accuracy and repeatability of them have been fair to ok. The rouge fab bender appears to be very easy to use and highly accurate , especially like the clamp blocks that allow you to remove a part and reinsert it without fear of loosening the exact index of the bend. I am a welding instructor at a technical college and we do some projects that involve some tube bending. This machine is a space saver and easily mover around the shop . I especially like that you can create bends in long lengths of tubing because the bender makes use of a vertical axis so you don't have to rearrange your shop just to make a bend in a long tube. Looks like an amazing tool
You should do our marketing/sales! -Jarrod
I bought my rogue bender last year and I just love it. It makes amazing bends . I really enjoy watching your videos . Long
thanks for the support! -Jarrod
Im longing for the day that I get that long rogue tube….. bender in me shop. So I can do a long bend radius in one shot! Lol
it's for sale! -Jarrod
Can’t wait to get my hands on a bender and notcher! Great stuff guys
benders and notchers are for tubing, not hands. Thanks Tommy. -Jarrod
It has been worth the long wait to get a quality tool like this.. Refinement takes time but when you reach this high standard of bending, what else can you ask for.
other companies to stop copying us would be the only thing we ask for -Jarrod
Love your use of long!
@@jamie1311 I was going to send one of your new staff member to the hardware store, to ask for a long wait.
Your tube bender has been awesome! I just finished up my Mini Bike Snow Bike project, and the bender was incredibly helpful for that! But, man, now that bike is LONG!!! 😜
pictures or it didn't happen -Jarrod
@@RogueFabrication If only I could post pics here... lol
You can see photos on my Instagram
instagram.com/mikes.mini.motors/
or the build series will be on my RUclips Channel
ruclips.net/user/MikesMiniMotors
Only the first video is out ATM, but the next one will be out later this week.
@@MikesMiniMotors will do! -Jarrod
That’s a LONG tube to bend in one shot! Nice product and good job!
thanks Farmer Jon! -Jarrod
Hey All, 7:11 if you redesigned the leg extension to have "hooks" on that 1st hole you could run your bolt thru & hang the extension which makes 100x easier to get the next bolt in.
Or, if it's not supporting tons of weight then you could use the pivot point from the 1st to hold it out of the way long enough to run a 2nd bolt thru & allow a 2nd set of "hooks" instead of holes drip down onto it & EzPz
Heck, maybe just trailer hitch bolts would be infinitely easier for something that may not be on there often or for long. ... Unless the extension absolutely has to be bolted together tight.
Have you considered using automotive quality quick disconnects to make disconnecting the machines hydraulic lines easier & cleaner to attach & remove?
*This is all from a place of love, not trash talking. I think it looks like a Great product
Great suggestions. There are reasons for the rigidity we designed in with all the bolted joints. It is time consuming, but simple and super rigid. It will likely make more sense in late 2023. We may or may not be less cryptic and ambiguous about it before then. -Joe
It wont be long before I order my new Rouge Fab bender, it's a great value and quality bender.
Now if it were that easy to find DOM tubing in mid Florida that would be great.
which model tickles your fancy? -Jarrod
@@RogueFabrication
Model 601 welded with 1.5 dia 4.5 clr die with pressure rollers.
Now about finding dom tubing...
I've been wanting one of these benders for a LONG time! Rad stuff
roguefab.com You can build your wish list there and save for later. -Jarrod
With those “long” bends. That bender can really make a “man drool”! Get it?
Keep up the good work. Thanks
We've already trademarked the term. Thanks! -Jarrod
I love my ole bender. I've had it for 7 or 8 years now has always worked great. Bought the roller dies a few years later n that made it even better! Whenever asked I always recommend your gear...
Long
thanks for the support Adrian!
Another great addition to your line. Thanks for all of the great videos too!
thanks for watching them! -Jarrod
Looks like another great tool I love the quality of your product sure this has been long time coming
looks and is! Thanks Jeremy! -Jarrod
I was hoping to see a brand new 3" mandrel bender but i'll take this long one as the step towards the future.
that might take some Devine intervention....-Jarrod
Chris - We are still on track to have a larger OD machine in the future. Don't give up on us ;) -Joe
Dang That's a LONG 180 you bent, Awesome equipment, This would be so handy in my shop.
We have them in stock!
Great work!
thanks! -Jarrod
Thanks for the very well thought out and step by step instruction. Love your videos and constantly impressed with your engineering
instructions will be included in your order! -Jarrod
You make this look so easy. Good job
The machine does all the work. The brain does all the math. Thank you!
The mandrills 14:15 👍🏾👍🏾👍🏾👍🏾👍🏾
Thanks!
Man this is cool and i want to check out more on how this even works. Such a long bend
it's magic! -Jarrod
That is an incredible machine wow I could us that! Love all your machines they bend incredibly well !!! Long
Right? No CGI was used in the video if you can believe that. It's real! -Jarrod
@@RogueFabrication lmfao nice
That was a long one she said as Joe pulled his tube out with its perfectly formed 180 bend.
Kevin, Kevin, Kevin......-Jarrod
Although I don’t have mandrel bending in my long list of things I’d need to with this bender, it’s nice to know it can!
sure can! Which model do you have? -Jarrod
@@RogueFabrication don’t have one just yet! Definitely want the M625 though
@@timtiminy we're here when you are ready!
Would be awesome to get one of these setups! Still saving for it! Unfortunately it's taking a "long" time! Ha ha🤣🤣
I see what you did there! -Jarrod
Stoked for my bender to arrive. Someday I'll order that mandrel attachment. That thing is an enabler for sure. The ability to bend 20ft long thin wall tubes will be a game changer. Thanks
take some pictures and leave a review on the website. You'll be entered into a drawing and could win in March! -Jarrod
@@RogueFabrication will do! Hoping it ships this week! Thanks Jarrod
@@jasonmcnulty6029 I just checked with the amazing team in the shop. Look for a tracking number the week of the 25th. You can email me directly sales@roguefab.com for any questions about your order. -Jarrod
Received, welded, painted and assembled! Looking forward to breaking it in after a short vacation.
Really impressed with the cut quality you guys maintain, the simple assembly procedure and overall design. Everything fit together like a glove.
Thanks!
@@jasonmcnulty6029 glad to hear!
Would love this to improve my skills as a fabricator, that was a long piece of tube!
it's for sale on roguefab.com -Jarrod
You guys are making some awesome equipment! I hope to have one of your benders for my shop some day
Thank you! It's our goal to make quality tools that are durable, fun, and easy to use!
Very detailed step by step instruction, good stuff. Hopefully I can own one of these pipe soon!
Thank you Jillian!
I like long videos and long benders. The wife likes other things... not going there. Haha! Great products joe!!
happy wife, happy life! -Jarrod
Looks really cool. I definitely like it..... but, I have to say. I was hoping this video was going to be about your fixture/ welding tables you were talking about a while ago.
I've been waiting a long time for your design on those.
Any insight on them?
like all small businesses, we've been affected by supply issues, Covid-19 and other deals that are slowing things down a bit. The welding table is still on the table. Stay tuned. -Jarrod
Long
Not too often you have a Engineer that actually knows how to use the item they designed. Awesome work!
Joe likes that you capitalized Engineer. Thanks Scott! -Jarrod
Its great when you can have a single Engineer (or singular team) work the entire project, along with troubleshoot, upgrades, and new development. I dont think joe ever sleeps because every time ive called or emailed he's answered, never in a rush, never push a sale or upgrade. This has become a long babbling review, sorry.
@@2fwelding842 No apologies needed. On top of all that, he's great to work for and I am not being paid to say that. -Jarrod
I have been following rogue fab for a long time. I have yet to buy a setup though I really would like to. I will say, I'm always surprised how large these setups look with a person next to them.
we would really like you to as well Jonathan. -Jarrod
Love your videos. Can’t afford one yet, but getting there.
We're ready when you are! Stayed tuned for future videos by subscribing if you haven't yet already.
Excellent videos! Thanks for supplying excellent info am not boring. Cheers!
Thanks for the great feedback!
Awesome video hope to see more
thanks! there will be more for sure! -Jarrod
Long time fan here, just had to say it :)
what's your favorite RF video and why?
Remember a "long" time ago, you said you would give me a bender? I need a new one, I have the the old, old, old, one. And you guys keep coming out with new stuff, I can't keep up.
Hahahahahaha
maybe you want to win one. Check out www.roguefab.com/drawings/ -Jarrod
I love my bender and notcher!
we love our customers!
Good thing I built my shop big enough for that long attachment
let's see it! -Jarrod
@@RogueFabrication I don’t know how to add a picture
@@alanlasack2630 you can tag us on Instagram @roguefab if that works for you. -Jarrod
I just paid off my m600 using the financing option through rogue fab, had a 24 month LONG term, and now it's just a money making machine.
you are aware of our royalties policy right? -Jarrod
@@RogueFabrication have not heard, no.
@@BadgerCanyonMotorsports we don't have one but it would cool if that was a thing. -Jarrod
I have a whole exo skeleton to make for my truck. Including brush guard and roof racks etc. I have to get one of these sooner than later.
think Oklahoma and be a Sooner kinda guy -Jarrod
GAME CHANGER 🙌
Big thx!!!
Well done
Thanks!
can you add the dies that you used on this bend in the description please?
I caught this comment WAY too late, I will add it right away! -Joe
Love the LONG videos
we're glad! -Jarrod
I wonder if the madrel system could be made in one piece or build it up and roll it into place to reduce complications of damaged components from wear and tear?
Great idea!
Friend can you share the dimension of the extension you are assembling, thanks in advance
It's a beast... about 13 feet long.
Owning one of these is a pipe dream of mine
keep dreaming and we'll keep owning the competition. -Jarrod
Im pretty sure it would take a novice a long time to set this up. With the added dark scenes it made it look like it may have taken two or three days to set it up in your free time.
With that said, the quality is very impressive and once set up i can see some impressive food grade distribution systems benefitting greatly for no wrinkles as well as some beautiful hand rails, second to none.
We shot all the film on one day. We're still learning film production. It isn't like microwaving food. Lots of variables.
@@RogueFabrication yes i do understand my son does real estate photography he also takes pictures of his two toddlers and 1 infant i see the level of exhaustion to get the shot right. You make the set ups look very simple and folks can refer to you tube for a refresher.
Y'all should make an adapter kit to convert a JD2 to run vertically and accept the mandrel attachment for those of us who regrettably bought a jd2 model 32 instead of the m625...
That is a very interesting idea! Unfortunately (in this case) JD2 dies are "V" shaped. They are mostly round in the groove, but with a slight V/parabola/etc shaped in there. They are incompatible with mandrels since they pinch the tube in the bend. They work well on most thin wall applications. What are you bending?
Been following you for a couple years now and impressed with the advancement of the bending capabilities. Do you have a 1 shot 180 degree bender in process (chain driven)? "Long"
Yes we do.
New setup is super Long but way cool
part of being cool is looking cool. Joe requires all employees to use a specific hair product. Spiky hair for the win. Brandon has the best hair with me a close 2nd. -Jarrod
Is there any reason that the non-operator side of the mandrel extension frame can not go on first? The extensions are LONG and if the machine is near a wall, access after the fact could be difficult.
Paul, no reason at all. They can be installed in either order. -Joe
My motorcycle frames won’t be that long, but it is nice to know they could be.
"If you build it" -James Earl Jones
I don't know what I would do without my bender and notcher
I think it's spelled BendOR -Jarrod
And what was the wall thickness? .065?
I forgot if this was .070" or .065" stainless. They would both have similar performance and setup, though. -Joe
How Long is the entry period?
Check out www.roguefab.com/drawings/ you have until the end of the month.
@@RogueFabrication Done
What’s the military discount?
5% on orders $1000 and over
That's a long tube ya got there!
you noticed! awww -Jarrod
May I ask if giftcard convertable to cash for international subscriber?
We'll make a blog post Monday and make an option for a reduced amount as a gift card if it's a legal option for us. I don't know if we can do that.
I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. Well that didny help for long i still want it. Can it only bend dom tubing?
No. It bends all kinds of tubing. You want to be careful for tubes with big and ugly seams on the inside when using mandrels though. -Jarrod
a LONG video is what i wished you would do.
Joe, the fabrication genie, granted you that wish.
Still waiting for a 4 ft 😆
I see your name on my desk more than anyone's lol-Jarrod
What a LONG stainless tube!
sure is! -Jarrod
That's some LONG pipe!
tube* -Jarrod
Some long stock
indeed! -Jarrod
Trailer
Yep... this is set to premiere on Monday. Set a reminder and join us with live comments!
I didn’t see the code word
@@AGCTV-1 It will be in the video when released later today.
Long
short
Tell your video editor to kill the stupid music
As we grow our platform on social media, we are able to commit more resources to better video recording and audio equipment. Stay tuned for the upgrades!
Long
short
@@RogueFabrication that mandrel would look good on my HD600. 😁
Long
short