Honestly very important that these videos come out cause many local bike shops won't offer repairs. Either sell you a new one or say no. Not profitable to repair it ls the answer for many shops that sometime pays high rent costs for shop store in the urban areas. An advice is to ask the rural located bike shop and they might help you 🤓
Hola, por que no has desarmado por completo el buje que aflojas en el minuto 2:18?, aquí se halla el principal movimiento entre los dos cuerpos del cambio, y es aquí donde se encuentra el principal problema en este cambio, el movimiento que haces en el minuto 6:50 está mostrando el buje que no has limpiado y cuando se atasque por el óxido ya será muy difícil de extraerlo
Is the fluid on the brush antiseize or did you use grease, i estimate, it works for all MY20-22 rear Mechs in the Deore range. Very detailed instruction, thx
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
most crucial part (cut at 5:55) on how to properly assemble the cage again to make sure the right tension is on the spring is not shown...
Honestly very important that these videos come out cause many local bike shops won't offer repairs. Either sell you a new one or say no. Not profitable to repair it ls the answer for many shops that sometime pays high rent costs for shop store in the urban areas. An advice is to ask the rural located bike shop and they might help you 🤓
The clutch system must be lubricated with a special grease, not the usual green one, because there is very strong friction.
Very nice guide, thanks 👍
the couse of this can be use of basic (alkali based) washing fluids. When he disasemble derailleur I didn't see any grease.
Hola, por que no has desarmado por completo el buje que aflojas en el minuto 2:18?, aquí se halla el principal movimiento entre los dos cuerpos del cambio, y es aquí donde se encuentra el principal problema en este cambio, el movimiento que haces en el minuto 6:50 está mostrando el buje que no has limpiado y cuando se atasque por el óxido ya será muy difícil de extraerlo
I did it, but on A XTR M9100 😎🔝
Has anyone had trouble removing the axle plate? Mine can be turned with an allen key but cannot be pulled out. Any ideas?
does anybody know if shimano sells any preplacment parts for the clucht lever?
What is that green grease you use on the bearing balls and the spring? Brand / name?
Thanks.
I think it's Park Tool bearing grease
Shimano high performance grease
How did you get the big tensioner spring reloaded?(i dont know if i said that right 😅)
GMBN Tech rear mech service will show you exactly how . Much clearer altogether better instructional . 👍
it was ectually really easy hahah. but the first time is allways the hardest@@icecremeSandcastles.
Hypnotic
Szaju czy to Ty??
crackin vidio thankyou
great
Before taking anything apart take plenty of pics
I cleaned mine yesterday, man was it dirty and rusty
nice
This content is stolen from Sickbiker: ruclips.net/user/cannondany
It's not
This is his separate RUclips channel that mainly focuses on bike repairs and parts replacement
Why the silly gloves?
so ur mom doesn't get gunk in her pewpew
Stop stealing videos!
His not
Is the fluid on the brush antiseize or did you use grease, i estimate, it works for all MY20-22 rear Mechs in the Deore range. Very detailed instruction, thx