With The Dash Swap Was Everything Plug & Play Or Did U Have To Buy Connectors To Fit New Dash. I Have Turn Key So How Do You Get The Push Start To Work
How hard was the dashboard? I wanna do sum like this but still keep the 5.7, was everything plug n play or did you have to splice stuff, also different bcm and ecu?
that shyt look clean af. i have a 05 chrysler 300c. was wondering if it would be the same direct bolt on but with a 2016 and up 300. did you use pillars, carpet etc from the 392? did you have to re-wire or splice anything?
Preciate you mane! It will bolt up the same, I used all of the wiring from the 392, but you’ll have to splice the headlights/taillights. I used 07 300 Carpet but I’m sure they all fit the same. Hit me on IG @ Srt.dc
@@SRTDC so you did the full swap? inside and out. headlights and all? im just doing the interior. everything else im leaving as is. how did the center console bolt up. same as oem? anything needs to be changed or spliced to make the newer shifters work. the one ill be doing is the knob. appreciate the reply big dawg🙏🙏
I’m having trouble getting my police pursuit 2019 to use manual mode , do I need to have a shifter like yours to do it , I have a floor shifter already
What do I need to in order to do this? I assume obviously the dashboard & center console, the steering wheel & I assume the cables as well? What else? Do I need the computer or computers? Or is that’s for the key fob if the car that your taking parts from has remote start? Then that’s when I would usually have to take the computer. I simply not sure what else I need. I assume it’s difficult but it’s manageable to a point you should be able to do this two days tops. Like on a weekend. I’m asking what exactly I need in order to do this bc I don’t want to end up taking my car interior apart & I end up missing something that I need to finish it. So I have to have leave it like that. Get what I mean? So that’s why I’m asking
@@offline9436 I can’t do this? Even Tho I own a 6.1L engine? So if I get a dash from a v6 engine. I would basically downgrading my engine bc it needs to have the v6 engine & trans? I need to get scat pack dash & engine with transmission. Of course I’m assuming with the engine wiring harness also
How hard was it to swap the dash and screen? Did you need to buy any adapters or anything? I got a 2020 scat in wanting to swap everything over to my 06 300 srt8
No sirrrr, it’s all plug & play! You’d have to make new brake holes for the brake booster & holes for the srs airbag module. Both videos are on my channel if you need to see em
@@SRTDC no way for real?? I was dreading swapping the dash because I thought it was going to be a wiring nightmare. I’m looking forward to seeing the finished product of yours!
@@SRTDC are you also swapping the transmission? Everything I read is a yes and no whether it will fit the first gen 300’s. I’ve seen it done but I don’t know if it’s just bolt on and go since it’s the same engine and computer from the newer car or if you have to do some cutting
Hey bro I need help with swapping the passenger seat in my 07 charger how can I swap rails or sum to make work? You mind giving me some tips to help me install it I'd appreciate it
Careful with a 2005-2008 5.7 300C. You're one dropped valve seat away from all that work being for nothing... unless you're willing to swap it or rebuild it.
Bro I've done a full hellcat swap in my 07 set now I'm on the inside gang how df do I find the dash and console what do I look under to find it ican get the seats but dash is a problem
looks good keep us updated!
That joint tight 🔥 👍
Looking good!! 👏🏾👏🏾👏🏾👏🏾
That shit crazyyyy mane 🔥🔥🔥🔥🔥
about to get started on my 2010 🤙🏽
How to did come along ??
Keep going brody 🍾 when u done 🤟🏾
Can u make those seat do the Chrysler sofa lean back? And wat model did u have to grab them from?
With The Dash Swap Was Everything Plug & Play Or Did U Have To Buy Connectors To Fit New Dash. I Have Turn Key So How Do You Get The Push Start To Work
Get it🔥🔥🔥🔥
Good shit , I did this for my 2019 dodge charger Rt , I put a 392 motor in it
Ik that bih live ain’t it!!
I wanna put scat seats in my 300 they jus bolt up jus like oem?
How much you charge to do a 2017 charger rt
How you get that push start capability to work? Thats really impressive I have a 07 300c and this is exactly what I want to do to the interior
It’s all new so it works like new. They do have aftermarket buttons for the first gens tho. Some on ebay
Thats awesome
You’re awesome my guy. 🤝🏽
🔥🔥🔥
How hard was the dashboard? I wanna do sum like this but still keep the 5.7, was everything plug n play or did you have to splice stuff, also different bcm and ecu?
Swapped everything. Spliced the small stuff that needed to be
I just bought a 2009 one ima need you to teach me how to do it
Yesss sir keep that shit up
How did you get the shifter to work need help?
The front seats plug and play ?
that shyt look clean af. i have a 05 chrysler 300c. was wondering if it would be the same direct bolt on but with a 2016 and up 300. did you use pillars, carpet etc from the 392? did you have to re-wire or splice anything?
Preciate you mane! It will bolt up the same, I used all of the wiring from the 392, but you’ll have to splice the headlights/taillights. I used 07 300 Carpet but I’m sure they all fit the same. Hit me on IG @ Srt.dc
@@SRTDC so you did the full swap? inside and out. headlights and all? im just doing the interior. everything else im leaving as is. how did the center console bolt up. same as oem? anything needs to be changed or spliced to make the newer shifters work. the one ill be doing is the knob. appreciate the reply big dawg🙏🙏
@@marcotena4158 fasho! Text me on IG (Srt.dc) or Fb messenger (DC Coleman) & I’ll lyk
@@SRTDC bet. just followed you on insta.appreciate the reply.
On God I just follow u on IG haha I'm literally in the process of all this help is so dearly appreciated
Man I got a 09 challenger I wanna do a dash swap in mine with the need challengers inside
fire 💥
You saved me man 😂 I was mad I had to delete & repost it. Good looking out!
@@SRTDC gotchu lol i thought i was having problems on my end when i couldnt hear anything
@@Alexx_Srt8 😂 messing with them volume button for a minute huh
I’m having trouble getting my police pursuit 2019 to use manual mode , do I need to have a shifter like yours to do it , I have a floor shifter already
Tbh I have no clue, I’m having the same issue. My advice is to go on Facebook Gen3 group & tell them what’s up!
Your ignition went from turn key to push start. How’d you make that switch with the key?
Swapped everything.
What do I need to in order to do this? I assume obviously the dashboard & center console, the steering wheel & I assume the cables as well? What else? Do I need the computer or computers? Or is that’s for the key fob if the car that your taking parts from has remote start? Then that’s when I would usually have to take the computer. I simply not sure what else I need. I assume it’s difficult but it’s manageable to a point you should be able to do this two days tops. Like on a weekend. I’m asking what exactly I need in order to do this bc I don’t want to end up taking my car interior apart & I end up missing something that I need to finish it. So I have to have leave it like that. Get what I mean? So that’s why I’m asking
You cant do this with out swapping trans and engine
@@offline9436 I can’t do this? Even Tho I own a 6.1L engine? So if I get a dash from a v6 engine. I would basically downgrading my engine bc it needs to have the v6 engine & trans? I need to get scat pack dash & engine with transmission. Of course I’m assuming with the engine wiring harness also
Was everything plug and play? I’m tryna swap my interior on my 15 srt to the charger interior
Yessir
I did a 392 swap on a 07 300 too bro everything is done but the lights not working 🤦🏾♂️ What do you think I can do?
Hit me on snap or IG @ Srt.dc real fast!
Raw
How hard was it to swap the dash and screen? Did you need to buy any adapters or anything? I got a 2020 scat in wanting to swap everything over to my 06 300 srt8
No sirrrr, it’s all plug & play! You’d have to make new brake holes for the brake booster & holes for the srs airbag module. Both videos are on my channel if you need to see em
@@SRTDC no way for real?? I was dreading swapping the dash because I thought it was going to be a wiring nightmare. I’m looking forward to seeing the finished product of yours!
@@TehRam318 Lol nah, it’s all simple & thank you man! This next video is about to actually be Crazy!
@@SRTDC are you also swapping the transmission? Everything I read is a yes and no whether it will fit the first gen 300’s. I’ve seen it done but I don’t know if it’s just bolt on and go since it’s the same engine and computer from the newer car or if you have to do some cutting
@@TehRam318 Everything’s being switched over, it’ll bolt up the same
I want to swap my interior 06 charger for something more modern. Anybody know something?
Hey bro I need help with swapping the passenger seat in my 07 charger how can I swap rails or sum to make work? You mind giving me some tips to help me install it I'd appreciate it
Use the stock 07 passenger floor rails, weld the seat to them.
@SRTDC bet bro I appreciate it man n ur car is lookin good. Have you finished the swap yet?
@@1lowsix914 yes sir, just not a RUclipsr anymore lol. It gets corny when everybody’s doing it Imo. Plus it wouldn’t be informational anymore
@SRTDC fr bro na I hear you man i did the same like 2yr ago just wasn't into it as I thought after I posted my first vid lmao
@@1lowsix914 lol mane! That clout life isn’t our thing I guess 😂
Whose car did you steal that stuff out of
maybe he just bought it? grown man hating on another man
What's up? Did you have any issues with the dash? Or did it go right in?
Right in
@@SRTDC Thanks
Did the seats bolt right in or you had to do something to make it fit
@4:20 I used the old seat frames to bolt the passenger seat down, that’s all I had to do.
@@SRTDC and the driver seat went right in?
@@abriannawilson-sq4bk Correct
Does the new Chrysler dash dash fit into the old body style ?
yes
Doing the same swap on my charger 09
Are you gonna replace everything or keep most of the stuff?
Did everything bolt in ?
Yessir!
Careful with a 2005-2008 5.7 300C. You're one dropped valve seat away from all that work being for nothing... unless you're willing to swap it or rebuild it.
Have you like not watched my videos lol??? I have a 6.4 392 motor swapped into it? Redeye motor next…
Does everything bolt up or will I need to fab ??
What year you got
07
@@SRTDC I’m just wondering about the wires really like is it just bolt straight on w/ plug and play?
@@keaundrerobinson7489 mostly, look at my other videos.
@@SRTDC yeppp doing that rigggght now
When you gone post a new video
Working on it as we speak brotha, most likely tomorrow!
Actually tonight 😂 I didn’t post the last one I created..
Boy gotta 300 92😂😂😂 I wanna swap a charger to a Chrysler w a different motor
@@SRTDC LS or scat
@@mercules8048 hell yea! Do the scat or cat & then LS swap another 😂that’s exactly what my next build is going to be
@@mercules8048 You hear me!! 😂 this thing is LOUD too lol & what motor you got in mind?
@@SRTDC where u get parts? I need to not be taxed
@@mercules8048 everywhere tbh man, Fb market, ebay, in person. If you live in the upper states, it’ll be more cheaper for you
Bro I've done a full hellcat swap in my 07 set now I'm on the inside gang how df do I find the dash and console what do I look under to find it ican get the seats but dash is a problem
You talking about where to buy them? Or
@@SRTDC yea gang where can I find a full dash and console are do I buy a part at a time not sure on this one no good feed back
@@cooleydread9860 you can find one on Fb market, ebay. The best place is somewhere local so you can grab both of joints at once
My boy bet real ones only
How can I contact you for some questions I’m doing some interior work myself
Snap @ Srt.dc or fb messenger @ DC Coleman
I wanna swap only the interior into my 09 you think I'll need the computer and wiring harness to make all the electronics work?
I believe so, but you’d have to splice some of the old wires & either Tune your old ecm to the new parameters or hard wire the new one
@@SRTDC bet I'm waiting for my camera to come in and ima try it
@@kenyattacrusoe1278 keep me posted my guy!