I used this after watching a video about repairing black and grey tanks on an RV. Mine had both torn loose at the connection because the trailer had been dragged around with no axle under it. I carefully followed instructions and used a dremel tool to clean the surfaces. Waited a couple of days for it to dry and then installed the new plumbing. NO LEAKS! Very very happy.
Sorry fella but I worked in plastics in the 1970s anything from hot air welding to plastic cementing so don't BS the public that you invented this bonding putty it's been around for years.
Should be. You will need an ABS compounded with Titanium Dioxide as opposed to ABS compounded with Carbon Black. The Carbon Black will have greater UV protection from Sunlight.
Please put your website link in the description section of the video... now I have to play the video, remember the url, then closed RUclips then open a web page...... blah blah, you get the idea
There are some fumes as the resin cures. \use in a well ventilated area. It is not toxic to the skin and will peel off when cured. I use nitrate gloves but any rubber glove will work. as you can see by the various videos I am not wearing any gloves.
@@easyabsrepair4488 will check it out. Just in a dilemma now because my repair is kinda urgent. Not sure if can wait two weeks. Am in singapore. Am tempted to just use super glue with baking soda or MEK with abs gauze. If I melt abs in MEK, is it comparable in results?
Look up a RUclips vid on making ABS slurry/glue. All you need is Acetone and ABS particles/chips etc. At my old workplace we used to save all the ABS drilling/sawing waste and use it to make up the glue.
I used this after watching a video about repairing black and grey tanks on an RV. Mine had both torn loose at the connection because the trailer had been dragged around with no axle under it. I carefully followed instructions and used a dremel tool to clean the surfaces. Waited a couple of days for it to dry and then installed the new plumbing. NO LEAKS! Very very happy.
So ... this is ABS slurry (acetone base).
Sorry fella but I worked in plastics in the 1970s anything from hot air welding to plastic cementing so don't BS the public that you invented this bonding putty it's been around for years.
Does this come in white or cream colors?
Only black
but it is paintable.
Can I use this product to repair a pinhole leak on a furnace vent pipe 45 degree joint (black ABS schedule 40) ? Thanks.
Yes it will repair any ABS
Buenas Como puedo tener más información sobre su producto y adquirirlo o cómo puedo comprarlo..Gracias anticipadas...
Can you get this repair kit in white?
Should be. You will need an ABS compounded with Titanium Dioxide as opposed to ABS compounded with Carbon Black. The Carbon Black will have greater UV protection from Sunlight.
Can it glue back a broken tooth?
Yes and you can weld it back in any color as long as you want a black tooth.
Please put your website link in the description section of the video... now I have to play the video, remember the url, then closed RUclips then open a web page...... blah blah, you get the idea
Does it come in white
racist
Great Product!
Is this resin toxic if exposed finger touches the stuff? Is this safer and less fumes than MEK? What type of rubber gloves to use?
There are some fumes as the resin cures. \use in a well ventilated area. It is not toxic to the skin and will peel off when cured. I use nitrate gloves but any rubber glove will work. as you can see by the various videos I am not wearing any gloves.
It is mandatory that you wear a mask.
Happy Gey Month 🏳️🌈
All this stuff is, is Plumbing ABS blue at any hardware store like Lowes.... WTF
Can you airmail to Asia?
Yes there is an international shipping option easyabsrepair.com
@@easyabsrepair4488 will check it out. Just in a dilemma now because my repair is kinda urgent. Not sure if can wait two weeks. Am in singapore. Am tempted to just use super glue with baking soda or MEK with abs gauze. If I melt abs in MEK, is it comparable in results?
Look up a RUclips vid on making ABS slurry/glue. All you need is Acetone and ABS particles/chips etc. At my old workplace we used to save all the ABS drilling/sawing waste and use it to make up the glue.