I've got 07 Freestyle Backcountry and replaced CDI/ control module after kill switches wouldn't work and now I'm burning bulbs and having same warning lights coming on speedo. I've heard CDIs from factory can suck. Did you get yours figured out - hope so? Thanks for doing the vids.
@@RYANHODGE100 Cool. Thanks. Mine is at our local BRP shop and I might have them replace stator and control module if wither is glitchy, but I'lll check out your vid too. Thanks again.
I will do another video soon, to show what I did, essentially, changed voltage regulator, stator, coil and light bulbs. Once the bulbs were changed though, that’s when things started to work properly.
@@RYANHODGE100 Good thanks. I put a new batterie and i just come to instal a new voltage regulator. Before i change the voltage was up to 18volts so all my bulbs explose but the speedo just blink after engine come hot or rpm increase. Now voltage ok 14.4v but again speedo and all engine light blink..tomorow i will try with new bulbs front and rear.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Change the CDI unit, i got the same machine and it fixed the problem.
Its located in behind the oil reserve container
I know you replaced it with a used one, but as you explained the problem, its the same as what was happening to me. You need a new CDI
Randy saw this and maybe this is your issue
ruclips.net/video/-DEdABBFVl4/видео.html
Maybe u found this if you did let us know
The uesd cdi box is no good buy a now one
Thanks for the info
I've got 07 Freestyle Backcountry and replaced CDI/ control module after kill switches wouldn't work and now I'm burning bulbs and having same warning lights coming on speedo. I've heard CDIs from factory can suck. Did you get yours figured out - hope so? Thanks for doing the vids.
posted a video with my fixes
@@RYANHODGE100 Cool. Thanks. Mine is at our local BRP shop and I might have them replace stator and control module if wither is glitchy, but I'lll check out your vid too. Thanks again.
Did you change the calibration module?
Changed the original for a used one.
Uploaded a new video explaining my fix
Ryan hodge100
I have the same problem with my 2008 skandic 550wt. How you fix this?
I will do another video soon, to show what I did, essentially, changed voltage regulator, stator, coil and light bulbs. Once the bulbs were changed though, that’s when things started to work properly.
@@RYANHODGE100 Good thanks. I put a new batterie and i just come to instal a new voltage regulator. Before i change the voltage was up to 18volts so all my bulbs explose but the speedo just blink after engine come hot or rpm increase. Now voltage ok 14.4v but again speedo and all engine light blink..tomorow i will try with new bulbs front and rear.
Just give up and give it to me. I'll replace the CDI and run it for the next 5 years...that's how I acquired one of my machines:)
I have a 2010 550F and it has weak spark
I would throw new plugs in it, and cut back the plug wires to fresh copper to see if that makes the spark stronger.
Sorry Ryan (not Randy)
Cdi