You are amazing Brother! this worked perfectly! you got a new subscriber! I updated to 19.1 and nothing worked! Learned my lesson, I will wait until they fix everything!
thanks my brother u help me out, hopefull atmosphere updtaes so i can upadte mario kar, i wanted to update because the new gtgp mod, u got anthor sub, keep working hard
damn brooooooo i just modding my switch 19.0.0 today and this just came out LOL, but you deserve all the subscribe and like for me now im downgrade it bck XD btw after tinfoil was ready to use on 19.0.0 i wish you had another vid for it as well btw bro you really save my day
Great video, quick question. Does this fix the sleep mode issue encountered on FW 19.0 and 19.0.1 where the consoles get warm / hot and drains the battery? Many thanks and keep up the great work.
Why do i get Error Code: 2162-0002 (0x4a2) right when it connects to wifi i blocked the nintendo servers with the emummc.txt in atmosphere/hosts. Previously i could always use wifi to get to the homebrew store on my switch and moonlight for pc remote play but i could not reach any nintendo servers which was good now it crashes if the switch connects to wifi. can anyone help me out?
@IDX3Tutorials tried that mate nothing seems to show when i put files onto sd card tinfoil won't appear and neither will fw 18 on daybreak strange mate
i downgraded by accident my Sysmmc. I can boot into my switch normal but after 15 sek it will brake down and Error message 2162-0002 will be shown. Can I Fix this? or do I just do the factory reset and install everything again on a New SD?
@@IDX3Tutorials connected switch to Hekate and connected trough SD card Mode. on my computer i opened Atmosphere folder but there is no contents folder. am I wrong like this?
If my switch is not yet modded and on 19.0, do you recommend modding on 19 then downgrading to use tinfoil or should I wait for tinfoil to be ready for 19. Is there an alternative?
is there an easier way to launch into hekate menue than having to rcm jig and run the payload or do you just have to do that everytime to get back to it? updating this emunand, has no effect on the sysnand c:
Hello, I did this with 2 switches. The first one is working fine. But the second one crashes a few seconds after launching emmummc. Error Code: 2162-0002 (0x4a2) "An error has occured". Can you help me?
@@IDX3Tutorialswhen I originally set up the mod it was on 19 on emummc your tutorial somehow added it to my sysnand how do I remove it. I don’t want to get banned and you should make an amendment for the video saying to not do fat32+exfat like in the video or people will have the same thing I did.
I don't think you understood things very well. Fat32 + exfat support cannot in any way affect emummc disappearing. If you had an emummc created, the update definitely didn't delete it. When you enter the launch tab, cfw-sysmmc and cfw-emummc are there, and you choose which one you want to launch. I practice emummc because it is a copy of the system that is on the sd card and whatever you do in it, it will not affect the stock sysmmc... Edit: So cfw-sysmmc exists in the launch tab, but as long as you don't mess with it, you're safe.
@@IDX3TutorialsThx for the reply, and I know it is, but I don't have a folder labeled Firmware. It's the only one I'm missing. What folder would it be in?
Hi, thanks for your support. I did everything just like in the video but once I am trying to start atmosphere I get the error message: unknown pkg1 version.HOS version not supportet. I am on 19.0. but I want it back to the older version. What am I doing wrong? Thanks!
i fallowed all the steps but when i went to daybreak it did not give me the option of the 18.1 firmware to download. I have watched your video so many times and i have no idea what happened. :/
Did you put the 18.1.0 firmware on the root of the sd card? Maybe you put the whole step 1 folder on the sd card? In that case, you have to enter that folder and the 18.1.0 firmware will be there.
I tried to downgrade with another video but now I can't access my original system or the magic, could this be fixed!? Please help! They tell me that this brick
Don't panic, it's normal because your stock firmware is version 19. The files are not compatible with fw 19, so you can't get to the stock firmware. When you update again to 19, everything will be normal. Currently, you can only boot stock firmware directly without the hekate payload.
@@IDX3Tutorials No, I can't, the Nintendo screen only appears and the screen goes black, and I turn it on again and the hetake opens again but I can't do anything emmu and stock dont working :(
I did it with Android I followed your tutorial now the thing is the hekate_ipl.ini is not coming up or...it's say update boot loader if you have a easy fix please help me
@@IDX3Tutorials But if the official firmware that has been updated to 19 does it will interfere with the jailbreak firmware? my nintendo has dual system.
Hello this is a very odd occurance happening but my Sandisk 512 GB won’t be read by the Nintendo switch anymore do you know why and what I could do to resolve this. The switch just says could not read micro sd card
I’m sure the card still works since when I plug it into my pc it works perfectly fine and when I tested out a 32 GB micro sd into the switch it read it just fine
@@IDX3TutorialsI forgot to add that even if the micro sd is completely empty like wiping it proceeds to not work for some reason and it used to work just fine a couple of days ago btw thanks for the video will be attempting it when I get home
![[Unpatched] How to Jailbreak Nintendo Switch in 2025 // FW 19.0.1 // BEST GUIDE](http://i.ytimg.com/vi/bH0BIZxZ9rI/mqdefault.jpg)
![[Unpatched] How to Jailbreak Nintendo Switch in 2025 // FW 19.0.1 // BEST GUIDE](/img/tr.png)
You are amazing Brother! this worked perfectly! you got a new subscriber! I updated to 19.1 and nothing worked! Learned my lesson, I will wait until they fix everything!
Thank you for the sub 🙂 Enjoy!
i have the same problem, if this works u get a new sub this is before.
thanks my brother u help me out, hopefull atmosphere updtaes so i can upadte mario kar, i wanted to update because the new gtgp mod, u got anthor sub, keep working hard
Thank you brother! 🙏
damn brooooooo i just modding my switch 19.0.0 today and this just came out LOL, but you deserve all the subscribe and like for me now im downgrade it bck XD btw after tinfoil was ready to use on 19.0.0 i wish you had another vid for it as well btw bro you really save my day
I'll just update the 19.0.0 package when tinfoil is ready. I'm glad I helped, enjoy!
Will you also make a video about it?
@Resul3600 Yes I will
@@IDX3Tutorials you're the best! Thank you
Really thank you man really good video you save my day
You're welcome 🙂
thanks bro you made my day
Glad to hear that!
thank you so muchhhhhhhhhhh u save my day
You're welcome!
super tuto comme toujours
Merci!
Great video, quick question. Does this fix the sleep mode issue encountered on FW 19.0 and 19.0.1 where the consoles get warm / hot and drains the battery? Many thanks and keep up the great work.
Yes, just because it returns the fw to 18.1.0, the bug will disappear.
@IDX3Tutorials many thanks brother
Thanks🎉🎉
Welcome 😊
By when can we expect stable releases for 19.0.0
It depends on the dev guys….
mybe next week on tuesday
@@MuhdKhairul96what makes ya say that
i downgraded my switch just like the vieo but now my tinfol wont work keeps asking me to pick a user and i do and it keeps looping
Delete it and install the fresh installer from the tinfoil site.
@IDX3Tutorials got it worked i delete the old tinfoil in the ad card and replaced it with the new folder and it worked
Thanks for the quick reply very
You're welcome! I'm glad you made it!
Really great video! But is it possible to have firmware 19.0 in sysnand and 18.1 in emummc? Thanks a lot!
It's exactly like that on my switch
It worked perfectly thanks but question, now when I go to the stock system it shows a yellow screen and that's it
If you completely turn off the console and start the stock firmware by pressing the power button there should be no problem.
@@IDX3Tutorials wdym? pressing the power button just brings me back to hekate
@@IDX3Tutorials update i just reset everything and re did the who installation and went back to 19.0.0 and it works fairly fine now
goat
my tinfoil still won't work i always have to open through applet mode
@azavierwikle9335 Delete it and install the fresh installer from the tinfoil site.
Why do i get Error Code: 2162-0002 (0x4a2) right when it connects to wifi i blocked the nintendo servers with the emummc.txt in atmosphere/hosts.
Previously i could always use wifi to get to the homebrew store on my switch and moonlight for pc remote play but i could not reach any nintendo servers which was good now it crashes if the switch connects to wifi.
can anyone help me out?
Maybe you use sysmmc for cfw? In that case, you should rename the emummc.txt file to sysmmc.txt
@@IDX3Tutorials i've booted up using CFW Emummc like i did before but now added a sysmmc.txt but still same error
No, if you boot into emummc, then it should be emummc.txt
Maybe this will help ruclips.net/video/dNvALYpid_A/видео.html
If my modded switch is on 18.00 but is not working with tinfoil etc, should i upgrade it or not to 19.00
If you copy these files to the sd card, tinfoil should work
emummc is force but not enabled. failed to launch hos. how i resolve this
You don't have emummc created and do not downgrade.
@@IDX3Tutorials Why i shouldn't Idowngrade?
@SaVaGe-wg5nx because your cfw is on sysmmc and you can brick the console.
Why would i wanna downgrade? Is the 19.01 not stable?
Not all homebrew apps work on 19.0.1
@IDX3Tutorials but all the games work?
@edgartv23 yes
upgraded to 19 but tinfoil wouldnt show trying to downgrade but even 18 isnt showing in daybreak :( what things should i try
ruclips.net/video/Gb8qnw3D9L4/видео.html
@IDX3Tutorials tried that mate nothing seems to show when i put files onto sd card tinfoil won't appear and neither will fw 18 on daybreak strange mate
i downgraded by accident my Sysmmc. I can boot into my switch normal but after 15 sek it will brake down and Error message 2162-0002 will be shown. Can I Fix this? or do I just do the factory reset and install everything again on a New SD?
Go to the atmosphere/contents folder and find the folder that corresponds to the program id you get in the error and delete it.
@@IDX3Tutorials connected switch to Hekate and connected trough SD card Mode. on my computer i opened Atmosphere folder but there is no contents folder. am I wrong like this?
If my switch is not yet modded and on 19.0, do you recommend modding on 19 then downgrading to use tinfoil or should I wait for tinfoil to be ready for 19. Is there an alternative?
You can do it that way, but only like in the video. Do not try on sysmmc.
How can i block updates to not go to 19
Turn off auto update in system settings or block servers as in this tutorial ruclips.net/video/gtVzofxG9Q0/видео.html
is there an easier way to launch into hekate menue than having to rcm jig and run the payload or do you just have to do that everytime to get back to it?
updating this emunand, has no effect on the sysnand c:
The second method is to buy yourself an rcm loader and the third is to install a mod-chip.
Hello,
I did this with 2 switches. The first one is working fine.
But the second one crashes a few seconds after launching emmummc. Error Code: 2162-0002 (0x4a2)
"An error has occured". Can you help me?
I guess you did something wrong. Delete the bootloader and atmosphere folders and copy the sd files again.
i got this too, its a bummer because i wwanna mess around with modded smash for the first time
@@IDX3Tutorials I have the same issue as well. Already try to delete and replace the folders, the error still comes up.
@@akeiafei did u fix it?
Set cfw in Flightmode. Maybe nintendo blocks you because cfw and ofw are not the same firmware.
hey nice vid man! any how if the FW 19.0? i accidentally update it into 19.0 when i playing OFW.
Sysmmc never Downgrade
Wait!! its saying i have cfw on my sysmmc, i never did that before how do i remove it please asap
The only safe way to downgrade is to create emummc and downgrade it.
@@IDX3Tutorialswhen I originally set up the mod it was on 19 on emummc your tutorial somehow added it to my sysnand how do I remove it. I don’t want to get banned and you should make an amendment for the video saying to not do fat32+exfat like in the video or people will have the same thing I did.
I don't think you understood things very well. Fat32 + exfat support cannot in any way affect emummc disappearing. If you had an emummc created, the update definitely didn't delete it. When you enter the launch tab, cfw-sysmmc and cfw-emummc are there, and you choose which one you want to launch. I practice emummc because it is a copy of the system that is on the sd card and whatever you do in it, it will not affect the stock sysmmc... Edit: So cfw-sysmmc exists in the launch tab, but as long as you don't mess with it, you're safe.
I have every folder BUT the firmware folder. Where can I find it?
Everything is in the file package
@@IDX3TutorialsThx for the reply, and I know it is, but I don't have a folder labeled Firmware. It's the only one I'm missing. What folder would it be in?
Reboot to payload cannot be used on a mariko system
I think you have to hold the R button. But remember, don't do this on sysmmc.
If I factory reset my switch I can get an older release right
No
Hi, thanks for your support. I did everything just like in the video but once I am trying to start atmosphere I get the error message: unknown pkg1 version.HOS version not supportet. I am on 19.0. but I want it back to the older version.
What am I doing wrong? Thanks!
I assume you put all the files at once. Watch the video again
i fallowed all the steps but when i went to daybreak it did not give me the option of the 18.1 firmware to download. I have watched your video so many times and i have no idea what happened. :/
Best decision is just wait new stable 19.0.0 full version updated.
Did you put the 18.1.0 firmware on the root of the sd card? Maybe you put the whole step 1 folder on the sd card? In that case, you have to enter that folder and the 18.1.0 firmware will be there.
@@IDX3Tutorials ah OK cool.
Will take a look at it again.
i put just the firmware in not the entire step one folder.
I tried to downgrade with another video but now I can't access my original system or the magic, could this be fixed!? Please help! They tell me that this brick
Don't panic, it's normal because your stock firmware is version 19. The files are not compatible with fw 19, so you can't get to the stock firmware. When you update again to 19, everything will be normal. Currently, you can only boot stock firmware directly without the hekate payload.
@@IDX3Tutorials No, I can't, the Nintendo screen only appears and the screen goes black, and I turn it on again and the hetake opens again but I can't do anything emmu and stock dont working :(
@misaelperalta7516 Have you tried without the sd card?
@ yep i tried without sd card, press two buttons vol and only appaer Nintendo and power off
I did it with Android I followed your tutorial now the thing is the hekate_ipl.ini is not coming up or...it's say update boot loader if you have a easy fix please help me
redownload sigpatches
What's the difference between "install fat32" and "install fat32 + exfat" in daybreak ? My sd card is formatted to fat32, what should i do ?
It is exfat support. It won't convert your sd card to exfat. Just follow the steps
@IDX3Tutorials you're the goat i'll never forget you thx for fast answer
And IS tinfoil updated to 19 ?
@Legeekoss Unfortunately not yet.
@@IDX3Tutorials Ok thx, do you think it will be updated soon ? I just updated my emummc to Fw 19 so i cant wait
@Legeekoss No idea
Is this can resolve the problem of launch game and other hbmenu app? I'm new in nintendo wich is i just accidently updated a couple of days ago.
Yes, this solves everything
@@IDX3Tutorials
But if the official firmware that has been updated to 19 does it will interfere with the jailbreak firmware? my nintendo has dual system.
@@MuhdKhairul96 It won't interfere with anything, ofw stays at 19.0.0
@@IDX3Tutorials Okay…Thnk you👍🏼
It says failed to get update information?
If the sd card is almost full, it could be a problem. You can also try downloading the files again.
Hi
We can play ps2 games on switch ?
For that you need android or linux installed, but it won't be a pleasant gameplay...
@@IDX3Tutorials okay thank you
Hello this is a very odd occurance happening but my Sandisk 512 GB won’t be read by the Nintendo switch anymore do you know why and what I could do to resolve this. The switch just says could not read micro sd card
I’m sure the card still works since when I plug it into my pc it works perfectly fine and when I tested out a 32 GB micro sd into the switch it read it just fine
Maybe some files are corrupted. Try this ruclips.net/video/kpHLW-3d4EM/видео.html
@@IDX3TutorialsI forgot to add that even if the micro sd is completely empty like wiping it proceeds to not work for some reason and it used to work just fine a couple of days ago btw thanks for the video will be attempting it when I get home
I get the failed to get update information
Result: 0x00234a02
Make sure the folders are in the right place and that you have some free space
What about the Tinfoil?
On 18.1.0 it works as before...
@@IDX3Tutorials my switch now has 19.0.0 should I downgrade it or wait for the update?
@@Ali_Helal That depends on you...
i need help when i tried to boot into emummc after the step 2 i get a emummc disabled what can i do thx
Do you even have emummc created?