Glad to hear an update man! And especially nice to see all yhe prototypes you went through, struggle is real so as determination! Best of luck to you in futute and I will be following along :-) 👍🏻👍🏻👍🏻
Unbelievable! So awesome, I can't imagine how great it must have felt when you finally got the results you were hoping for. I'm glad you have a partner now, I can't imagine doing this by myself. Thank you for your hard work!
Great to see you are still going on this. Stay on it, its super interesting and we can only imagine what can be achieved if you can solve this puzzle. Have always believed that magnetics and the physics around gyroscopic effect are significant components in creating some form of gravitational effect that may replace current forms of vehicle propulsion as well as underpinning a perpetual free energy technology such as the SEG.
I was able to take neodymium magnets to create the sine wave effect on a ceramic ring magnet with no problem. But to get the rings your using to do that may require you to create a coil that would then power a dow rod with a 45 degree taper. Or another idea is to create two copies that will sandwich the ring and charge each coil with a seperate power source.
Awesome job! Thank you for sharing. For the sine wave, the last solution you showed that was making good progress, do you also magnetize the opposite side in the mid-point to bend the wave more? I couldn't tell from your demonstration if that's also something you are doing to get a larger sine wave effect. Sorry if you already explained this and I am being redundant. Great work though and thank you for your efforts. That was great to watch.
Awesome work, I'm glad people are still exploring the SEG! Something that occurred to me that I wanted to hear your thoughts on... The SEG is an analog version. What if you were to design/build a digital version? The SEG basically sucks in low energy electrons and ejects them at high energy/speed. It does so by utilizing alternating conductors and insulators with rotating magnets to push the electrons. Without going into the weeds too much I'm sure you can picture various parts being replaced with digital versions to accomplish the same results. Perhaps your electronics partner might weigh in on this idea as well?
I will share this comment with him and see what he thinks. It is something I have considered also if this device could be somehow a solid state unit at some point just no idea how that could be yet
@@alexellis5352 I'm not an electrician, but I think you could use something like a tesla coil to bounce charges back and forth with a few diodes and/or transistors to limit electron flow to one direction after a full charge is built up. Another easier way to explain it might be to say that the SEG is an analog version of a tesla coil with the major difference is that the SEG pulls in loose electrons from the surrounding air rather than from a power source. If you modify a tesla coil to do the same thing it might work like an SEG. The trick would be in the design of an antenna or electron collector as well as the opposite end that releases the electrons. The way I understand the SEG is that it pulls in slow moving electrons from the core/central axle and releases the high speed electrons out of the sides of the faster spinning rotors. If you set up a tesla coil with the right kind of antennae on both the input end and where the spark-gap is so that the electrons aren't coming and going in one big arc, but are dispersed you shouldn't get arcing electricity. Such an antennae would be something like a microfiber towel; something that has lots of microscopic needle points. There is a company developing just such a type of antenna to collect electric charge from high up in the air the way a crystal motor does, but on a much larger scale. They aim to collect that charge and use it. I forget their name and it's been a few years since I looked them up, but it looks like an interesting idea for energy collection directly from the earth's electric field.
Hi, good work, and trials .... why do you magnetised the rings with points of mag fields, around the circumference of the ring ? .... are the points all in the same polarisation to each other ? Thx
Update. Their is a peak induction time before the collapse. It would be neat to know that peak timing and to have the ring insert and make contact with the rods at that moment. Then removed before the energy vacuum callabse.
if your trying to get the magnetic points all the way through the metal. wouldn't it be better to use the back end of the coil as well. think of it like a g-clamp/spot-welder, horse shoe magnet, or like a C pickup coil. then 1 metal magnetizing rod on each side of the ring magnet. field lines will be more intense and directed. not arc shaped. that way you can do axial or radial points.
Thanks for the update. I really appreciate your work and willingness to share. This is the only Chanel I have notifications on for.
Glad to hear an update man! And especially nice to see all yhe prototypes you went through, struggle is real so as determination! Best of luck to you in futute and I will be following along :-) 👍🏻👍🏻👍🏻
this is awesome guys, I'm really glad your still working on the Searl
Thanks for the update! It's great seeing the process of trying different ways to make things work. Can't wait to see what's next!
Hey, homie! now that's what I call a genius!
Unbelievable! So awesome, I can't imagine how great it must have felt when you finally got the results you were hoping for.
I'm glad you have a partner now, I can't imagine doing this by myself.
Thank you for your hard work!
I was able to recreate the magnetization that John Searle was talking about.
good to see the effort thanks for sharing
Wow! Great work
Great to see you are still going on this. Stay on it, its super interesting and we can only imagine what can be achieved if you can solve this puzzle. Have always believed that magnetics and the physics around gyroscopic effect are significant components in creating some form of gravitational effect that may replace current forms of vehicle propulsion as well as underpinning a perpetual free energy technology such as the SEG.
Awesome work bro!
for print sinus signal , you need rodin coil in resonance RLC , thanks for videos
I was able to take neodymium magnets to create the sine wave effect on a ceramic ring magnet with no problem. But to get the rings your using to do that may require you to create a coil that would then power a dow rod with a 45 degree taper. Or another idea is to create two copies that will sandwich the ring and charge each coil with a seperate power source.
Awesome job! Thank you for sharing. For the sine wave, the last solution you showed that was making good progress, do you also magnetize the opposite side in the mid-point to bend the wave more? I couldn't tell from your demonstration if that's also something you are doing to get a larger sine wave effect. Sorry if you already explained this and I am being redundant. Great work though and thank you for your efforts. That was great to watch.
Awesome work, I'm glad people are still exploring the SEG! Something that occurred to me that I wanted to hear your thoughts on... The SEG is an analog version. What if you were to design/build a digital version?
The SEG basically sucks in low energy electrons and ejects them at high energy/speed. It does so by utilizing alternating conductors and insulators with rotating magnets to push the electrons. Without going into the weeds too much I'm sure you can picture various parts being replaced with digital versions to accomplish the same results. Perhaps your electronics partner might weigh in on this idea as well?
I will share this comment with him and see what he thinks. It is something I have considered also if this device could be somehow a solid state unit at some point just no idea how that could be yet
@@woodbrassandglass If you guys decide to explore this I look forward to your videos!
How would you digitize this?
Also fantastic job! Looking forward to further videos!❤
@@alexellis5352 I'm not an electrician, but I think you could use something like a tesla coil to bounce charges back and forth with a few diodes and/or transistors to limit electron flow to one direction after a full charge is built up. Another easier way to explain it might be to say that the SEG is an analog version of a tesla coil with the major difference is that the SEG pulls in loose electrons from the surrounding air rather than from a power source. If you modify a tesla coil to do the same thing it might work like an SEG. The trick would be in the design of an antenna or electron collector as well as the opposite end that releases the electrons.
The way I understand the SEG is that it pulls in slow moving electrons from the core/central axle and releases the high speed electrons out of the sides of the faster spinning rotors. If you set up a tesla coil with the right kind of antennae on both the input end and where the spark-gap is so that the electrons aren't coming and going in one big arc, but are dispersed you shouldn't get arcing electricity. Such an antennae would be something like a microfiber towel; something that has lots of microscopic needle points. There is a company developing just such a type of antenna to collect electric charge from high up in the air the way a crystal motor does, but on a much larger scale. They aim to collect that charge and use it. I forget their name and it's been a few years since I looked them up, but it looks like an interesting idea for energy collection directly from the earth's electric field.
Hi, good work, and trials ....
why do you magnetised the rings with points of mag fields, around the circumference of the ring ? .... are the points all in the same polarisation to each other ? Thx
Hi, yes they are all the same direction for now.
is this still a problem? i envisage 6 C shaped laminations instead of the 6 posts, then youd get your spots on the bottom of the ring as well
Your vision may be correct. If you go ahead and create them please share the details with me 👍
Update. Their is a peak induction time before the collapse. It would be neat to know that peak timing and to have the ring insert and make contact with the rods at that moment. Then removed before the energy vacuum callabse.
Or it's the calapse that is desired
Searle used a combination of both AC and DC at the same time to imprint the sine wave into the magnets
if your trying to get the magnetic points all the way through the metal. wouldn't it be better to use the back end of the coil as well.
think of it like a g-clamp/spot-welder, horse shoe magnet, or like a C pickup coil. then 1 metal magnetizing rod on each side of the ring magnet.
field lines will be more intense and directed. not arc shaped.
that way you can do axial or radial points.
I'm wondering where you're at now. Hope it's close.
Muy interesante quisiera aprender
Why not make composite rings with as many points as you want? Instead of trying to make a one piece ring? Small magnets in a resin etc
I wanted to hate this, but by the end I thought “well hell that’s pretty interesting.”
I think these are related to the searl effect generator :
ruclips.net/video/YkWiBxWieQU/видео.html
The dipole effect could be causing it.