@ Todd I found the torque he used It's a GEDORE 763-05 Torque Wrench DREMOMETER pre set 5 Nm Made in Germany and yours for $ 345,00... I would stick to the CDI
did you see him lube everything back up after jetting? as long as you keep it lubed jetting your bearings doesn't matter. They tell you not to because they know you lazy ass won't regrease everything after you wash them.
all well and good if you have a huge bucket, lots of space for rinsing off your bike, a portable air hose, etc, etc. But what if you live in a small apartment with no room for all this stuff? What's wrong with just taking a clean rag, some 409 cleaner (the best and cheapest bike cleaner there is) and cleaning the bike off that way, no fuss and no muss? I've been doing this for years and it keeps the bike cherry merry with no excess to clean up. Try it!
+Andr. Dre It's just a torque wrench. mikevannike8 months ago @ Todd I found the torque he used It's a GEDORE 763-05 Torque Wrench DREMOMETER pre set 5 Nm Made in Germany and yours for $ 345,00... I would stick to the CDI
@@joesaric1 bro if you tighten your headset bolt to 5 - 10 nm is too much. like wheel bearings, tighten it until theres no rattle anymore and that's it. anymore than that you will add unnecessary pressure to your headset bearings. not good for the carbon bearing seats either.
LOL these guys don't give a shit about blasting off the grease inside the hubs, man, they probably have 10 more bikes instore in that truck just waiting to be used after the first one is broken. I guess if I had that kind of money I wouldn't care either.
Looks like they are prepping F1 racing cars, except on bikes. Very cool. Shows how serious these races are.
That's a true pro mechanics for pro riders. Vamos Contador! !!
High pressure rinse you do force moisture into bearings.
Madre mia que buenos son, montan y desmontan una bici como si nada!
@ Todd
I found the torque he used
It's a GEDORE 763-05 Torque Wrench DREMOMETER pre set 5 Nm
Made in Germany and yours for $ 345,00...
I would stick to the CDI
What is the tool the mechanic uses to tighten the cassette while the quick release is still in place?
those guys are quick as fuck!
What did they say about not blasting your bearings with water jet?
Pro team, almost unlimited resources - they can afford to jet wash bikes. Also, the effects on the bike aren't as bad as you'd think.
Guoenyi Free wheels, hubs tyres. Plus every new handle bars tape ok every race chain and cogs.
did you see him lube everything back up after jetting? as long as you keep it lubed jetting your bearings doesn't matter. They tell you not to because they know you lazy ass won't regrease everything after you wash them.
He is not going to close to the bearings. Also the power of the jet is not so strong as on a car.
whats the name of the little tool, replacing the rear wheel, so that the chain is still tight ?
flownomis
all well and good if you have a huge bucket, lots of space for rinsing off your bike, a portable air hose, etc, etc. But what if you live in a small apartment with no room for all this stuff? What's wrong with just taking a clean rag, some 409 cleaner (the best and cheapest bike cleaner there is) and cleaning the bike off that way, no fuss and no muss? I've been doing this for years and it keeps the bike cherry merry with no excess to clean up. Try it!
#ratman1960 luvyu - mate there is nothing wrong with that at all.
what matters the most is that you make the best out of what you have. well done sir!
any bike that you dont use anymore? can i get one please
as the tool is called the minute 1:41 ?
+Andr. Dre It's just a torque wrench.
mikevannike8 months ago
@ Todd
I found the torque he used
It's a GEDORE 763-05 Torque Wrench DREMOMETER pre set 5 Nm
Made in Germany and yours for $ 345,00...
I would stick to the CDI
it looks like they have done this before couple times :)
What is that torque wrench he is using ?
mikevannike Hard to tell, but I have similar wrenches from CDI and Ritchey. I like the CDI wrenches a lot.
Just think somewhere there is a whole trailer filled with S-works road bikes just sitting there
What lubricant are they using for the drivetrain?
01dangerranger Morgan Blue Syn Lube
Butter.
Wha Wha funny guys. Thanks M Glacken
He tightens stem bolts on steerer and then headset bolt. Ouuucha! Basics.
he´s just checking wether anything´s loose, this is a quick safety check, not an adjustment...
Yees but headset bolt its not on 5-10 Nm
@@joesaric1 bro if you tighten your headset bolt to 5 - 10 nm is too much. like wheel bearings, tighten it until theres no rattle anymore and that's it. anymore than that you will add unnecessary pressure to your headset bearings. not good for the carbon bearing seats either.
自転車も選手に投げられたりするけど、毎回こんなに手入れしてもらっていたら、自転車も本望だよ
Sl4？
Yeah I do that after all my rides! NOT
карту Тинькофф можете заказать тут.www.tinkoff.ru/sl/A1s9RPeMINo
LOL these guys don't give a shit about blasting off the grease inside the hubs, man, they probably have 10 more bikes instore in that truck just waiting to be used after the first one is broken. I guess if I had that kind of money I wouldn't care either.
and they They are selling it for its own money !
Just give even just one s-works bike ahahahaa the unused ones
Brix de ciycl