Restoration Old Bedford Truck Seized Diesel Engine | Rebuilding Nissan Bedford Diesel Engine
HTML-код
- Опубликовано: 13 сен 2024
- Restoration Old Bedford Truck Seized Diesel Engine | Rebuilding Nissan Bedford Diesel Engine
Handmade Hino Bus Manufacturing Process 👇
• Handmade Hino Bus Prod...
Hino Truck Leaf Spring Installed at local Workshop 👇
• Hino Truck Leaf Spring...
1. amazing Restoration Nissan BedFord Engine
2. repair truck engine
3. how to repair truck engine
4. rebuilding nissan truck engine
5. rebuilding diesel engine
6. old diesel engine restoration
#olddieselenginerestoration
#restoration
#amazingrestoration
#repair #rebuild
#enginerestoration
#enginerepair
#amazingtechnology
#pakistanitruck
#rebuildingdieselengine
I like these videos because they remind me of my grandfather. He was a rancher and welder. No machine shops or fancy Snap Ons. I still have some of the tools he "made" to get the job done. All these hard workers learned from someone else. No tech schools, but tribal knowledge and hard work.
This is "Doing the best with what you've got and succeeding"
هل من صلى على رسول الله
عليه افضل الصلات والسلام🤲🏻🤲🏻
Отлично! Уже не босиком, уже с гайковёртом. 👍
Göt
Ресурс гайковёрта берегут, используют только при разборке 😁
да у них и динамометрический ключ есть, все ок
У нас на металлолом аккуратнее двигатели разбирают.
😂😂😂😂😂
Когда 10 человек собирает, а другие 10 разбирает, того и жди косяка где нибудь.
Good mechanics done the old way john scotland
I like the way the guy taps each liner before fitting it to make sure they all sound the same, as one that sounded " off" would have a fault in it 😊
Good job 👍
Капиталка в полевых условиях! :))
когда он вытащил и выкинул с сторону распредвал, я натурально понял что такое культурный шок. Занятное видео.
Yer toprak ve çeliği çizemez. Kültür ile hiçbir alakası yok. Geri takmadan önce temizlemiş olabilirler. Bu motorlar hassas değil. Minimum çabalama , minimum malzeme
Слово антифриз как я понял им не знакомо. Судя как просто откручиваются гайки ремонт был в прошлом месяце
😂😂😂
Motorun bakımı düzenli olarak yapılmış.
Вот нахрена блок возили в "специализированную" мойку высоченным давлением из шланга, заткнутого пальцем?
Это заменяет фрезеровку плоскостей,плюс вода лечебная затягивает коверны от углекислого газа
Neat to watch their hard work but a little cleaner work environment would help a lot
Des vrais mécanos hors pairs 👍 chapeau les gars avec peut de moyens et beaucoup de savoir faire 👍👍👍
Very nice work
All nicely torqued up,
head skimmed, and i even noticed how they painted the block to make it look pretty..
i'd hire these lads any day.......over my dead body..!!!
MashAllah Hard Nd Good Work .......... By Wow Mechanics
I love that truck! The decoration is amazing.
Hard working people
That’s pure teamwork. Great to watch these professionals. Working conditions are not so great but they came out the best under given resources. Really hard workers.
Professionals? What are you talking about? it hurt me while I was watching this, the guys are scattering parts while they are dismantling it, did you see how he took out and threw the camshaft just on the ground, but how do they turn the engine block over? this is not a restoration cuz these guys without the slightest desire to do well simply rebuilt the engine. Also where is the oil lubrication when installing new shells and crankshaft?
I'm done, I won't even go on🤦♂️
So... How long will it keep running until it seizes up again
Depends on how much sand and dirt they stuffed in the crank case.
Do you realise that this truck is over 50 plus years with what seems to be the original engine. I'm sure they've done this in pass and have had good results, hence the reason they're still in business. So to answer your question. Maybe another 50 plus years again.
Westerners are jealous, they can not make an engine last for 10 years. How can a 3rd World country make the same original engine from 1950's run in 2023. Its amazing isn't it. Only Pakistanis can make a 70+ truck keep runnings like new. Keep being jealous..
Debe, de, funcionar, pues, le, an, cambiado, camisas
5 years of continuous work
This place is the winner 2022 of "Cleanest Place in Pakistan".
Very interesting I like this channel great mechanics
Nice video, I enjoyed 🙏🏾, good memories
عمل جميل وممتاز خالص.ابداع
What a great idea for a ring compressor
beautiful work ♥
Ain't it so interesting to see how working together bears fruits 😊
I like the way the trucks are painted in rainbow colors and that the employees are allowed to wear dresses.🌈
मेरे पास भी बेडफोर्ड गाडी थी 1959 का मोडेल् था मैने सेकण्ड गाडी 1975 मे ली थी बहुत मजबूत और ताकदवान गाडी थी
I wonder who the two guy’s sitting watching in the background at 23.00 are, probably quality control, never the less great video.
I'd like to see it start & run.
Saudações do Brasil 🇧🇷
Там тосол со светафора красный 😅
With on RUclips it was fascinating journey keep it up.
Ustad Papoo Sab from faisalabad ❤❤❤
am very impressed with your work, cudos
Honestly and truly admirable --- these guys have grit that can't be matched by the western world's laziness and power tools --- in fact the new era of mechanics is "replacers" and without their laptops can't even repair a wheelbarrow
Beautiful Smart Work Good Job #Greatthings
Bardzo dobra robota. Pozdrawiam z Polski 🇵🇱.
I just wish they’d show it running
The proof that engine will work is the age of the bedford truck itself. It was originally made in 1950's, and has been running after 70+ years and will continue to run, as only those same mechanics have been able to keep it running for 70+ years, and keep it running for another 70 years.
@@user-jk9jg7nt9xbut this Bedford engine was excavated from the Mesopotamia.
Gostaria de ouvir o ronco do motor retificado. Saudações do Brasil. Gratidão pelo vídeo.🙋🙏👍🤝
Impresionante, en media hora, bajaron, repararon y montaron un motor, son muy rápidos...
Si media hora 🙄😄
Cylinderhead torque spec : YESSSS
Hey Imran - what's the torque setting on these old stretched bolts I'm putting back on? Oh, yeah, it's hit three times with the 10 pound hammer.
Very good work congratulations Brasil
This is Pakistan
Mantap kawan good
All that and you don’t even see it running
Nice safety shoes.
Great men working together to make a living. Do they rip out the engine, overhaul it and replace it back in the truck all in one day?
Bring this down to Texas.
Nicework❤❤❤❤❤
Almanya'da 3,5 sene egitim aliyoruz ama yinede motor tamir edemiyoruz. Sadece parca degistiriyoruz.
Bravo!**😊
TOP JOB GENTS , COMPLIMENTS FROM BRAZIL
Brol!. Nuff said!. 🙂
It would appear when doing the headbolts up all that is required is a socket and a huge bar is sufficient
Mantap.
Very good restoration of age old Truck Bedford . I have seen Bedford Buses/ lorries/ Trucks in my child hood friend. ST buses in Maharashtra also uses Bedford engine vehicles in the older days, my childhood memories also get refreshed with the restoration of this Bedford engine Sir.
D
not a Bedford engine ! but a Nissan engine,
Подсветка недавно красилась,а движок уже меняют.Вывод,мотор уже недавно меняли.
I wonder how much it cost to the owner
I always thought that engine rebuilding involved micrometers, feeler gauges and torque wrenches. But interesting to watch nevertheless!
Made in Pakistan High Quality
Pinter pinter orangnya.
..amazing work’s.. ! 👍
I'm confused the the title of the video says restoration of old Bedford truck diesel engine, and rebuilding of a Nissan Bedford engine. I didn't know Nissan made Bedford engines, I use to drive them in the mid 1960's and they only had Bedford engines as far as I'm know made in Luton England fitted but i stand corrected if not true.
It's a nissan U.D engine, early 90's model. Your correct about the Bedford engines however Bedford did use Isuzu engines aswell but not U.D engines, so must be a retro fit.
Hello from Texas yes allegedly Nissan Bedford teamed up for a short period greetings to all in England I was American teamsters union driver 1970 to 2000 great to be retired best regardes to all lord muck Kurt mills chanel may also know dulce and c r Mackey in Texas USA
@@CrMackey-kt3mp Hi sorry I missed your reply thanks for the information, I use to driver Bedford TJ's for Maynard's Original Wine gums in North London from 1967 - 70. They had coach built bodies built at Arlington Motors Coach Works in Enfield London no power steering on these boys but we managed. The brakes on the early models were of the vacuum type not very good took longer to stop 🥺 no joke. They were fun to drive though, I do have some photos of Maynard's trucks going back many years. Be glad to send some to you with your permission that is. Best regards Reg
that when engines were made with good steel not junk today cant even get a cam to last a week now
Новые вкладыши, поршня, гильзы, все помыли из шланга, закрутили на глазок, нормально же. Даже заведется наверное. И минут 20 проработает.
What's a tension wrench
Holy crap was that a power tool I saw?
Yea Buddy
2:20 Why this engine sieze?
Either lube or water
Nissan 175 ,200 , 205??. Saludos desde colombia😊
It's kind of a funny "procedure" to throw everything in the dirt, after dismantling it.
But it works. Whatever works, is the way to go.
That ground has to be contaminated. Does anyone ever work inside and on a work bench?
Everytime I see them working it's always been on the floor with their safety flip flops on.
Workbenches (and even toilet bowles) are forbidden in Pakistan.
If they didn't drop everything down in the dirt, they wouldn't have to spend so much time cleaning it up before putting it back together.
@@claudehuyess4466 It's religion.
When Allah was born, his mother first dipped him into the dirt.
@@horstmuller7512 shut up
Gives them good reason to clean each part. We work on benches at waist height...totally different concept. We also blow our noses into hanky or tissue and carry them around all day....they are horrified.
@@horstmuller7512
Ah what a shame
It seems your mother dropped u in a pile of human excrement, especially when she couldn’t figure out who your father was. 👍👍
Word on the streets is your mother was popular on the block
Nicknamed “slack sally”
Sure..with modern methods, this can be made in half time...!
Why do all that work and put old water pump back on. The only things that where new are piston sleeves bearing and gaskets. Farmers did this kind of stuff it’s not supposed to last just get you by for a while
I wonder how much time on it since the last tear down.
Boden schön mit Öl verseucht
Supeeeer
An astonishing 😱😱
Ese motor no es el motor Bedford que conocemos nosotros en argentina es totalmente diferente al Bedford de aki
لبيك يا حسين
Bhai ap kis city sy ho
What’s the orange stuff that seems to be in all of the water passages? If it’s what I think it is, there’s no wonder as to why this thing seized.
Bedford is a good truck but in Bangladesh it's going to Banned soon :(
Vietnam number one, 1980 no oil, vehicle run by coal
Are the crank seals easy on a Bedford
А что изменилось.?
Интересует сколько это мотор пройдёт.
Форсунки масла даже не трогали, хорошо хоть помыли.
Как говорил Вовка из тридесятого царства, ладно и так сойдёт ! 😁
i lok at that black and hydrophobic floor of Dirt and ask myself...where are the last generation members ? ..oh nevermind, they are stuck, glued to European and British Roads.....
Cadê as camisas velhas ?? Botaram as novas, mas não mostrou tirando as velhas ...
Mashallah
Shouldn't they use torque wrench for some specific areas of repair!!??
Bhai Jan ye engine Kitna cc Hota ha? Please jawab dejye ga
Los respeto mucho pero lo único que hacen es lavar un motor por dentro, que tipo de rectificación hacen? vuelve a poner pistones y todo lo demás viejo, que raro
Disorot ga nih
Its not a Bedford diesel its a 70’s -80’s nissan PD or FE6. Great old engines
As far as I know, they never built this type of Bedford with a diesel engine. Someone did a really good job of transplanting this big diesel into the old Bedford.
А завести??😂
Мотор не завелся кстати, я знаю
Not a torque wrench in site, don't bother to spec anything, and they wonder why it seized up
Why?
Bedfordのトラックって、UDのEngineだったのか、知らなかった。