Thank you Denix for making this video. I screwed the grips off mine so I could paint them darker, and a few parts fell off. Now I know where to put that little spring. Thank you for this tutorial!
Sin duda la más parecida de todo vuestro catálogo al arma original de fuego, me gustaría pediros que os replantearais hacer funcionales todos los seguros y demás mecanismos en el resto de réplicas como en esta, por ejemplo en el rifle Enfield o el fusil de asalto Stg44 entre otros. Muchas gracias Denix, vuestras réplicas son las mejores del mercado, un saludo :)
Me encanta, creo que he encontrado una de mis replicas favoritas. Impresionante el proceso de montaje, aun así yo no lo intentare no sea vaya algo mal xD Mi like y favorito va sin dudarlo
Where is the video for the denix 1050 / 357 Magnum Python. I need some help by the reconstruction. Did some weathering but have my problems with the double action mechanism. Watch others of your Videos but it still want work.
Hola! , tengo una Colt 1911 de Denix, el modelo 9312 o 9316, nose de qué Odell dispongo ya que hay un seguro que funciona pero los demás no , al desmontarla y al ver este vídeo , me di cuenta que mi colt no tiene tantas piezas como esta , le falta la pieza de color acero que es donde se enganchan los muelles en el percutor o martillo y su muelle , me preguntaba si Denix tiene un teléfono de contacto donde le pueda preguntar cómo puedo resolver el problema, ya que el muelle del percutor se rompió pero hice uno como el original , al no tener manual de instrucciones ni una guía de las piezas pues nose como colocarlo. Gracias
I'm looking at getting the strippable 1911, my own many firearms but would like to have one that is totally safe to display. I hope you guys don't let me down.
I know it's completely safe I own just over ten firearms 4 pistols one including a micro pistol also an MP5 . I was just worried about quality. Just got mine today the model that can be disassembled. I'm very impressed I would rate it at b+ surplus condition but to me that's a plus as it gives the look that it was used in world war II. Great job done Denix, out of all my miniature this one by far is my best and favorite display piece. I already ordered an acrylic stand and real 45 ammunition reloaded with spent primers no powder.
I'm planning on buying one and i want to ask if a dummy .45 round with identical size as original will fit in magazine? (A little wierd question but i like adding as much realism as i can)
Thank you for your interest in our products. Regarding to your question I must inform you that it is not possible to load our rifle reproductions or reject shells . They are not adapted expressly. Most of our replicas are made in 1:1 scale but the internal mechanism and the ammunition, magazines and cylinders are a bit different or over-sized to avoid the adaption of real ammunition for functional effects. In some case also the size has been modified according to the legal restrictions in some countries.
No, they are similar but not exactly the same to avoid firing function. Please not that our internal designs are modified and adapted to be safe and for decorative/collection purposes.
Thank you for your interest in our products and for your comments. Kindly note that our designers are used to assemble and desassemble their creations.
If i understand your catalogue correctly you also offer another 1911 which does not disassemble. Is that correct? What does that model do? And how detailed are other pistols in general?
Thank you for your interest in our products. We work with wholesalers and distributors but I regret to inform you that we don’t have distributor in Philipines. I can only suggest you to get our model from any on-line shop that accepts shipments to Philipines.
We do not sell our DENIX products directly to the final customers as we have agreements with distributors in several countries. You can check on our website the map of sales points or send us your location to sales@denix.es and we will send you the details of the distributor corresponding to your area.
Oh WOW! That model is far more detailed and, functional than I thought it was.
Thank you Denix for making this video. I screwed the grips off mine so I could paint them darker, and a few parts fell off. Now I know where to put that little spring. Thank you for this tutorial!
me too lol
Denix should make the BAR browning automatic rifle.
getting one of those for my birthday present
We hope so... here you are some of DENIX FRIENDLY POINTS for achieving this: www.denix.es/en/denix-community/denix-friendly-points-map/
Word's can't even describe how much I want one of these
Wow... thank you euan.
Hi soory if this is a dumb question but will the fake .45 fit in the magazine?
hola muy buen vídeo asombroso ese montaje el arma es una pasada como todas la del catalogo pero la 1911a1 se lleva la palma te dejo mi like
Muchas gracias @elcale24 Intentamos trabajar continuamente para ayudar a todos nuestros fans ;-)
I have this model it’s one the best models in my opinion
I have the 8312 model. It's great! Make a demountable Beretta M9!!
What material are these denixes made of?
Have Denix made some complex changes to the 1911. It looks far more involved even for field strippable. Thats a good thing, not a criticism...
this one looks acceptable.....going better all the time!
Thank you for your interest in our products and for your comments!
Sin duda la más parecida de todo vuestro catálogo al arma original de fuego, me gustaría pediros que os replantearais hacer funcionales todos los seguros y demás mecanismos en el resto de réplicas como en esta, por ejemplo en el rifle Enfield o el fusil de asalto Stg44 entre otros. Muchas gracias Denix, vuestras réplicas son las mejores del mercado, un saludo :)
Muchas gracias por su observación. Tomamos nota de ello y estudiaremos las posibilidades de desarrollar otros modelos con sus mecanismos funcionales.
@@DenixReplicaWeapons Gracias a vosotros por ser tan atentos con los clientes :)
Me encanta, creo que he encontrado una de mis replicas favoritas. Impresionante el proceso de montaje, aun así yo no lo intentare no sea vaya algo mal xD Mi like y favorito va sin dudarlo
Muchas gracias KIKE22TRK
Where is the video for the denix 1050 / 357 Magnum Python. I need some help by the reconstruction. Did some weathering but have my problems with the double action mechanism. Watch others of your Videos but it still want work.
Hola! , tengo una Colt 1911 de Denix, el modelo 9312 o 9316, nose de qué Odell dispongo ya que hay un seguro que funciona pero los demás no , al desmontarla y al ver este vídeo , me di cuenta que mi colt no tiene tantas piezas como esta , le falta la pieza de color acero que es donde se enganchan los muelles en el percutor o martillo y su muelle , me preguntaba si Denix tiene un teléfono de contacto donde le pueda preguntar cómo puedo resolver el problema, ya que el muelle del percutor se rompió pero hice uno como el original , al no tener manual de instrucciones ni una guía de las piezas pues nose como colocarlo. Gracias
I'm looking at getting the strippable 1911, my own many firearms but would like to have one that is totally safe to display. I hope you guys don't let me down.
Yes, our products are totally safe due the nature of the material they are made. Also because of the internal designs of the mechanisms.
I know it's completely safe I own just over ten firearms 4 pistols one including a micro pistol also an MP5 . I was just worried about quality. Just got mine today the model that can be disassembled. I'm very impressed I would rate it at b+ surplus condition but to me that's a plus as it gives the look that it was used in world war II. Great job done Denix, out of all my miniature this one by far is my best and favorite display piece. I already ordered an acrylic stand and real 45 ammunition reloaded with spent primers no powder.
@@JS-ed2hg Thank you for your comments
Do you have one marked US Navy?
holy shit m1911 is solid work!
When you buy the replicas do they come in parts?
no, they are assembled. These are just for tutorial purposes
Is the trigger semiauto or manually reloading after every shot? Sorry for my terrible English I'm Italian
it is manually reloading
I'm planning on buying one and i want to ask if a dummy .45 round with identical size as original will fit in magazine?
(A little wierd question but i like adding as much realism as i can)
Thank you for your interest in our products.
Regarding to your question I must inform you that it is not possible to load our rifle reproductions or reject shells . They are not adapted expressly.
Most of our replicas are made in 1:1 scale but the internal mechanism and the ammunition, magazines and cylinders are a bit different or over-sized to avoid the adaption of real ammunition for functional effects.
In some case also the size has been modified according to the legal restrictions in some countries.
@@DenixReplicaWeapons Ok thanks.
I'll buy it anyway
@@lord4459 9mm will fit and load, but drop out of the barrel
Are this mechanisms identical to the original? I mean, the assembly and disassembly process is the same like a real pistol?
No, they are similar but not exactly the same to avoid firing function. Please not that our internal designs are modified and adapted to be safe and for decorative/collection purposes.
@@DenixReplicaWeapons thank you!
I notated differences about springs behind disconnectos:the real pistol has a laminar spring
What's the name of the 1911 model that you show in the vid
it is the Automatic 45 pistol M1911A1, but or ref. code is 1312
He really put that together like it was nothing
Thank you for your interest in our products and for your comments. Kindly note that our designers are used to assemble and desassemble their creations.
Aren’t they just a soft cast alloy and can’t be converted ?
Yes, correct. They are made in soft cast that doesn't allow them to be converted.
I got it but the thumb safety is too hard and won't budge even though the hammer is cocked. what should I do?
sorry for the inconvenience but we can only suggest you to follow the step by step of the tutorial.
Could you make one but for the Luger P08?
We are developing videos of those replicas continuously. We take note.
@@DenixReplicaWeapons thanks!
If i understand your catalogue correctly you also offer another 1911 which does not disassemble. Is that correct? What does that model do? And how detailed are other pistols in general?
Yes, there are the refs. 1316, 6316, 8316 and 9316, which simplified mechanism. Only moving parts of hammer and triger.
@@DenixReplicaWeapons Thank you!
Could you do the schofield revolver please thank you
you mean thats all thats holding your barrel in..ahahahaha
Many handguns just used a pin to hold the barrel inside.
How can I ship a denix replica in the philipines
Thank you for your interest in our products.
We work with wholesalers and distributors but I regret to inform you that we don’t have distributor in Philipines.
I can only suggest you to get our model from any on-line shop that accepts shipments to Philipines.
where can i get one of these in america
We do not sell our DENIX products directly to the final customers as we have agreements with distributors in several countries. You can check on our website the map of sales points or send us your location to sales@denix.es and we will send you the details of the distributor corresponding to your area.
Also can you put normal 1911 grip's on it
Even the original grip would fit in, we cannot grant that any original will fit in perfect condition.
www.denix.es/en/denix-community/denix-friendly-points-map/
Uno de la Beretta