Dark dragon wing besides the tensioner do u have to replace the other parts I believe called pullys or something... I just replaced my belt tensioner and pump.
I did it!!! Thank you so much for this video! I pulled it off in 7 1/2 hours last night with pretty much not a single hang up. And I did it just based off of this video and never having done anything this involved before. I probably could have even done it in less time but I was pretty tired at the end seeing as I finished at 5am. The only thing I did different was took the alternator bracket off of that other piece to make it easier to get it back in at the end. Besides that and not being able to fit the torque wrench in at a few spots it was a breeze. Thank you so much for posting this!! I'm so pumped that I actually pulled this off when I am far from a mechanic.
Fantastic! I've done this twice on my sons car (2006 Lancer). 1st at 114,000 miles and again at 214,000 miles. I'm doing his best friends soon (same model) . 2 things ; 1st I use water pump gasket sealer and 2nd I replace the crankshaft position sensor while I'm in there. Great video! You are an artist sir!
Thank you so much for putting this video up. I used your video to replace the timing belt, tensioner, water pump and also did the oil seals (which were leaking) on my Lancer today. It was such an incredible relief when it was all back together and started first go. I was very pleased as I have never done a job of this scale before on a car. I bought my 2003 CE Lancer (Australia) brand new and still love it after 20 years. It's never once let me down. To anyone out there thinking of doing this work, follow this video in detail and use common sense and all will be good.
Thank you so much for uploading this video with every detail properly recorded. I started the job with some friends yesterday and put in about 7 hours. I changed the crankshaft pulley, serpentine belt, and timing belt on my car. The only thing I had trouble with was aligning the pulleys since the timing belt had torn but other than that this video made my day. I saved about 150dlls easily.
+DarkDragonWing i didnt see what time you guys started but you finished at 1:53am, how long will this take approximately to replace the belt and cleaning? im nearing 98k (81km atm) says on manual to change at that time
Just completed this repair by following along with your video and a repair service manual. Excellent job and thanks for posting this you are a life saver!!!
Thanks for this great video, guys! I'm just finishing this job on my 2006 Lancer, as well as an oil change, power steering fluid flush, brake fluid flush, and fuel system clean-out including taking off the fuel injectors and flushing them, and probably saved around $1500. The way you recorded your sequence of steps was easy to follow, and I liked the way you cracked the crankshaft nut with the car starter and breaker bar; easy-peasy! The only thing I went to learn elsewhere was how to align the crankshaft and camshaft sprockets, since my camshaft sprocket rotated a little between taking the old belt off and putting the new one on and I didn't fully trust the marks I'd made earlier. I'll be back on the road shortly; thanks again!
Just got a 2002 Rally OZ and watched a few of your videos. Has 145k miles on it so I will probably do this soon. I've done lots of tough jobs but nothing beats the detail you just went into.
I've been watching your videos and I just realized that your one of the guys I watched videos about the timing belt when I was rebuilding my head, I like how you work and you post short sweet and directly to the point video's 👍🔧🧰👨🔧
Really appreciate！I just need this recently. My car is 2005 lancer, mileage about 140,000 km, and never change the timing belt. Two days ago, the alternator belt had broken then damaged my radiator. I think maybe it's a perfect sign for me changing the timing belt.
Just for those with the manual transmission, you can actually remove/tighten the crankshaft pulley bolt by putting the car in gear and having a friend press on the brake pedal. It will prevent the engine from rotating.
excelent video i just bought a lancer 2003 ES and im watching every video to fix it myself i have problems with the control arm it sound weird... keep it like that congrats!!!! for your channel
Thanks very usefull video, I will work in my Lancer this saturday to replace the timing belt, I am not sure to replace the water pump.... regards from México
y dont u ask for 1 us dollar from all your fans.will b doing this job on my 02 oz soon and will let u no how it went.me and u can get it done whith no problems.thats worth a dollar two me.then u can turbo the lancer the mirage and the e30.lol.thanks for ALL the lancer videos.saved me so much time and money by doing the work myself.your videos r very helpfull and thank U very much.
Awesome! Getting ready to start this tomorrow -- you video will help immensely. I've watched it 3 times already. One question: How do you know how tight to get the accessory belts when you're putting things back together? Also, after you put the new timing belt back on, did you need to manually turn the engine a couple revolutions? Thanks!
great video... i would point out either they unbolted the front or the rear mount or they're broken since they can tilt the engine so much with little effort. Also for the engine shaking back and forth when turned on.
Looking at it again, thank you. It's actually simple. Can you just use throttle intake cleaner to clean the inards of the water pump area, pre installation of the new pump?
Was just curious if you had ever thought about changing the roll stoppers for the lancer. From what I've gathered online a fair number of people have problems with theirs (including myself). The front roll-stopper is pretty easy to change out but that rear one can be a pain. I know I'd be a happy subscriber with your input!
+DarkDragonWing The roll stoppers are engine mounts which are not load bearing. They are meant to restrict the engine from moving too much. They're parts 3 and 6 from farm7.static.flickr.com/6133/6011883338_993e29d304.jpg
hello , sawadikap . im from malaysia . your video fixing car is realy realy great and its help me a lot of ,for saving money since i found your video . and i learn lot of new things. thanks to u a lot . i have request if u dont mind . my lancer compressor is broken . i think . how to check if it work . and how to change or service it . i hope u dont mind to make video for my problem here . realy hopping to u . sawadikap . thanks a lot
GregoryHouseMD1 you definitely already got it but for the front windshield he it up for only a few seconds, and pull it up towards the roof, kind of diagonally. similar for the back. the sides start under the fan cover under the windshield wipers. literally yank on it a bit for the start, then after you got it started pop the rest off carefully with all of your fingers gradually till you reach the back
I just did my timing chain on my mazdaspeed 6, then did a pull i was at 150mph around 5900-6000rpm and blew it up. Pulled it apart this week and soun a rod bearing and the piston hit my valves now im getting the head checked for crack
+dale c good job! motor swap awaits you if your crankshaft, rods, pistons is bent. then on your head if valve seats are damaged and head is non servicable, need a new head. all those parts costs lots of money in total. it sucks i know its cheaper to get another used motor
I`m so glad I`ve found your channel, such good information in a good way! Thanks a lot Mac! Do you have a video of the installation of your new air intake? I`m looking to change mine and and the engine bay looks exactly the same, mine is a 2005 Lancer VRX
If you go for a cold air intake get a short ram I got a K&n tune less one and it got tore up by the battery in normal driving or you could just relocate the battery to the back
Hey since your going to drive your E30 in the next video for the whole turbo build you need a better clutch mainly for every turbo build you need to get a clutch
So to put tension on the timing belt you tighten the tensioner, put the belt over it, then loosen it so the spring moves it towards the belt then tighten it back down?
What's also draining with the coolant at 0:56? Do you have to drain the coolant too? Is 1:28 needed to be done by having to turn the key or was it to make it easier for you? Thank you, for posting this video
If you want to replace the water pump, then you have to drain the coolant. The turning the key is to help un-bolt the crank bolt. If you can get the bolt out with a impact gun, then you don't need to do the key turning method.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
2003 Lancer Timing Belt Kit
eBay goo.gl/e2kAis
Amazon amzn.to/2oYlqhN
DarkDragonWing. How many hours are you working on this car?
Dark dragon wing besides the tensioner do u have to replace the other parts I believe called pullys or something... I just replaced my belt tensioner and pump.
DarkDragonWing v
I did it!!! Thank you so much for this video! I pulled it off in 7 1/2 hours last night with pretty much not a single hang up. And I did it just based off of this video and never having done anything this involved before. I probably could have even done it in less time but I was pretty tired at the end seeing as I finished at 5am. The only thing I did different was took the alternator bracket off of that other piece to make it easier to get it back in at the end. Besides that and not being able to fit the torque wrench in at a few spots it was a breeze. Thank you so much for posting this!! I'm so pumped that I actually pulled this off when I am far from a mechanic.
Yes! Awesome!! Glad you did it.
Dude you deserve another spliff
It took you 7.5 hours to do a timing belt? Jesus
Did you get stuck on the 2:35 mark? The metal brace with the long bolt and the short bolt. Cant get the engine low enough to clear it
Congrats man so hows your car now?
The world is yours young man. You have a work ethic that will lead you to success in whatever you choose to pursue.
Fantastic! I've done this twice on my sons car (2006 Lancer). 1st at 114,000 miles and again at 214,000 miles. I'm doing his best friends soon (same model) . 2 things ; 1st I use water pump gasket sealer and 2nd I replace the crankshaft position sensor while I'm in there. Great video! You are an artist sir!
Mine is at 217k and has not been changed
@@titusremy5268 same here over 200 k .....
and I think I have problem with water pump. Looks a fan project.
Thank you so much for putting this video up.
I used your video to replace the timing belt, tensioner, water pump and also did the oil seals (which were leaking) on my Lancer today. It was such an incredible relief when it was all back together and started first go.
I was very pleased as I have never done a job of this scale before on a car.
I bought my 2003 CE Lancer (Australia) brand new and still love it after 20 years. It's never once let me down.
To anyone out there thinking of doing this work, follow this video in detail and use common sense and all will be good.
nice job man! will do it soon!
Thank you so much for uploading this video with every detail properly recorded. I started the job with some friends yesterday and put in about 7 hours. I changed the crankshaft pulley, serpentine belt, and timing belt on my car. The only thing I had trouble with was aligning the pulleys since the timing belt had torn but other than that this video made my day. I saved about 150dlls easily.
Alfredo Sanchez belt tore? Lucky you didn’t destroy the engine or bend a valve being an interference engine.
Next video will be me driving E30, and talk about things while waiting for more money to buy more parts. Cheers
+DarkDragonWing Don't worry surely you will get the money you need for your cars and when you do i will be there watching and supporting all the way
Hey Mackey are you self taught or did you go to school?
Tr1gg3r1911 Hey. I'm self taught.
+DarkDragonWing Very cool. keep up the sweet videos Mackey cant wait for the next Rc modify.
+DarkDragonWing i didnt see what time you guys started but you finished at 1:53am, how long will this take approximately to replace the belt and cleaning? im nearing 98k (81km atm) says on manual to change at that time
Just completed this repair by following along with your video and a repair service manual. Excellent job and thanks for posting this you are a life saver!!!
Wow! Hats off to you - simple yet skilful - that's the way to do it!
You got me inspired now!
Thank you for posting and all the best!
Love all the precautions you take and the time/patience taken to torque everything. I would let you work on my car anyday
Thanks for this great video, guys! I'm just finishing this job on my 2006 Lancer, as well as an oil change, power steering fluid flush, brake fluid flush, and fuel system clean-out including taking off the fuel injectors and flushing them, and probably saved around $1500. The way you recorded your sequence of steps was easy to follow, and I liked the way you cracked the crankshaft nut with the car starter and breaker bar; easy-peasy! The only thing I went to learn elsewhere was how to align the crankshaft and camshaft sprockets, since my camshaft sprocket rotated a little between taking the old belt off and putting the new one on and I didn't fully trust the marks I'd made earlier. I'll be back on the road shortly; thanks again!
Man this reminds me of when I did my 02 Lancer OZ when I was 18. My first timing belt job, it was a pain but I got it. I miss that car...
You are THE best RUclipsr ever
Yay, warmer weather and more Mackey vids
Just got a 2002 Rally OZ and watched a few of your videos. Has 145k miles on it so I will probably do this soon. I've done lots of tough jobs but nothing beats the detail you just went into.
The hardest working man in MN.
+alarmboy01 :D haha
After doing this myself he made each step look like a walk in the park lol great video tho I couldn't have done it without it
I've been watching your videos and I just realized that your one of the guys I watched videos about the timing belt when I was rebuilding my head, I like how you work and you post short sweet and directly to the point video's 👍🔧🧰👨🔧
Awesome video, helped a lot and Ik you're only going to get better at everything you do God bless you guys and stay safe on the roads 🙏
Really appreciate！I just need this recently. My car is 2005 lancer, mileage about 140,000 km, and never change the timing belt. Two days ago, the alternator belt had broken then damaged my radiator.
I think maybe it's a perfect sign for me changing the timing belt.
When the coolant was shooting over the fill pan, god that made me laugh lol
Omg I did it your video made it so sooooooooooo easy to follow but very hard to execute 😂
AWSUM video SAVE a bucket full of money THANKS
as always amazing video been watching your videos way back i'm glad you're close to 1m subs keep it up!
Get yourself a man who can do both. Impressive man
Great video. Just one point: after installing timing belt You need to turn crankshaft twice and make sure timing Marks are aligned. Thanks
Thank you. The smaller belt was confusing. other then that, it went well, and your video was very discriptive.
👌✌️
Nice vid. Reminds me why I drive a truck and not a fwd car, just not enough room to work
love all your vids man...very cool love the R/C.s and the cars
thnx mackey to listen my topic .......keep going on ill support u
Just for those with the manual transmission, you can actually remove/tighten the crankshaft pulley bolt by putting the car in gear and having a friend press on the brake pedal. It will prevent the engine from rotating.
And if you don't have a friend available, you can put a rock on the break .lol
excelent video i just bought a lancer 2003 ES and im watching every video to fix it myself i have problems with the control arm it sound weird... keep it like that congrats!!!! for your channel
Thanks very usefull video, I will work in my Lancer this saturday to replace the timing belt, I am not sure to replace the water pump.... regards from México
Great informative video. Thanks for making it and showing everything.
Be BLESSED! MORE POWER TO YOUR CHANNEL !!!
FROM PHILIPPINES
Thanks so much for the video, you saved heaps of time and $350, cheers
This really makes me miss my old 2002 OZ. I learned so much from that car but never got to do the timing belt
Man this reminds me of when I did my 02 Lancer OZ when I was 18. My first timing belt job, it was a pain but I got it. I miss that car...
ขอบคุณครับที่ทำคลิปดีๆออกมาให้ได้ชมได้ความรู้ ผมชอบทางด้านนี้มาก เกี่ยวกับยานยนต์ แต่ผมไม่ได้เรียนทางสายช่างยนต์มาโดยตรงนะครับ แต่ความชอบส่วนตัวผมชอบมาก #ขอบคุณครับ #คนไทย
+จรรยวรรธน์ เนื่องชมภู ครับผม มีแบบภาษาไทยด้วยครับ ruclips.net/video/7JSbV5tE0Hk/видео.html
csikzenekar
thanks so much for this video, it helped a ton. Just finished this job with the help of the FSM and this video. Thanks again! awesome!
You are a PRO man! Thanks for sharing!
Thank you
you are excellent
We have benefited greatly from you
เป้นกำลังใจให้นะครับ ขอบคุณในน้ำใจ ที่ทำคลิปดีๆมาให้ชมนะครับ thank u.
u r lancer is back again after a long time...
It's not his
Hi, great video guys, very self explanatory ,well done!
that's a lot of work.
That's why some of us get paid for it lol
i did it in 2 hours
y dont u ask for 1 us dollar from all your fans.will b doing this job on my 02 oz soon and will let u no how it went.me and u can get it done whith no problems.thats worth a dollar two me.then u can turbo the lancer the mirage and the e30.lol.thanks for ALL the lancer videos.saved me so much time and money by doing the work myself.your videos r very helpfull and thank U very much.
Great vid 👌🏽my job took me 2days🙈 I hv a 4g92 mvec swap in a lancer but space was tight making removing the bracket over the tensioner difficult
very good video, good shit darkdragonwing.
all of ur videos are very helpfull ,keep the good work :)
hehe you are a talented engineer. try your best :)
Thanks you reminded me on doing my timing belt :)
สูตรเดียวกันเลยครับ เอาน๊อตเพลาข้อเหวี่ยงออก สตาร์ทรถเอา
+สกลเกียรติ พูนศิริ ครับผม มีไทยแบบไทยด้วยนะคับ ruclips.net/video/7JSbV5tE0Hk/видео.html
Nice body kit
Awesome! Getting ready to start this tomorrow -- you video will help immensely. I've watched it 3 times already. One question: How do you know how tight to get the accessory belts when you're putting things back together? Also, after you put the new timing belt back on, did you need to manually turn the engine a couple revolutions? Thanks!
Thank you very much! you saved me a lot of money.
Well done!
you are awesome i get to learn so much about my lancer 2008
Hello, Mackey. Are you going to do a steering fluid flush and/or break fluid flush? Thank you.
+Eugene Philipenko Hi, I won't be doing that soon yet.
great video... i would point out either they unbolted the front or the rear mount or they're broken since they can tilt the engine so much with little effort. Also for the engine shaking back and forth when turned on.
hard work
but you make it easy work
nice very nice
nice job as always!
Looking at it again, thank you. It's actually simple. Can you just use throttle intake cleaner to clean the inards of the water pump area, pre installation of the new pump?
Yes, it should be ok. The cleaner will just evaporate.
Okay thank you 👌
Your videos have been very helpful I only wish you could have posted a whole lot more 💯
Just did mine, helped a lot...thanks.
I love working on my Lancer but I thing this job is way above my skill level.
I would let the mechanic do the heavy jobs too
Thanks guys, i have same motor with this lancer...pajero pinin 1800 ....and your video is very helpfull!!!!!!!!
12:10 Your school team mate that never helped you in the work and his name is in it 😂 😂
Thank you very much God give you more blessings
What an amazing well explained video mate!!! Now i can finally die in piece!!!! More videos like this please!!!!! Thanks for sharing.
Good and clean work, i would like to know how often the timing belt should belt should be changed on a Lancer 2012 , 2.0
60,000 to 80,000 miles
Was just curious if you had ever thought about changing the roll stoppers for the lancer. From what I've gathered online a fair number of people have problems with theirs (including myself). The front roll-stopper is pretty easy to change out but that rear one can be a pain. I know I'd be a happy subscriber with your input!
+Jordyn Maglalang I see. What part do you mean by roll stopper?
+DarkDragonWing The roll stoppers are engine mounts which are not load bearing. They are meant to restrict the engine from moving too much. They're parts 3 and 6 from farm7.static.flickr.com/6133/6011883338_993e29d304.jpg
Jordyn Maglalang I see. I will keep that in mind.
I'm waiting
Thank you!
Great vid! You don't have to set the tension for the tensioner, right? The spring self-adjusts? Thanks!
Yes, spring self-adjusts. Just gotta lock it in place after that.
@@DarkDragonWing - Awesome; thanks!
hello , sawadikap . im from malaysia . your video fixing car is realy realy great and its help me a lot of ,for saving money since i found your video . and i learn lot of new things. thanks to u a lot . i have request if u dont mind . my lancer compressor is broken . i think . how to check if it work . and how to change or service it . i hope u dont mind to make video for my problem here . realy hopping to u . sawadikap . thanks a lot
Just like me, I replaced my ralliart timing belt early in the morning, I finished around 3.30 am lol
Thank you so much !!! From Malaysia :D
How about you do a Quick Video on how to Remove the Roof lining on the Lancer? :D Come on please??? Thumps up if everyone wants a this video!
GregoryHouseMD1 You talking about the drip molding? It just snaps in and out
GregoryHouseMD1 you definitely already got it but for the front windshield he it up for only a few seconds, and pull it up towards the roof, kind of diagonally. similar for the back. the sides start under the fan cover under the windshield wipers. literally yank on it a bit for the start, then after you got it started pop the rest off carefully with all of your fingers gradually till you reach the back
🤙🏽🤙🏽🤙🏽💪🏽💪🏽💪🏽💪🏽 didn’t miss a step
I just did my timing chain on my mazdaspeed 6, then did a pull i was at 150mph around 5900-6000rpm and blew it up. Pulled it apart this week and soun a rod bearing and the piston hit my valves now im getting the head checked for crack
+dale c good job! motor swap awaits you if your crankshaft, rods, pistons is bent. then on your head if valve seats are damaged and head is non servicable, need a new head. all those parts costs lots of money in total. it sucks i know
its cheaper to get another used motor
You're not supposed to replace timing chains........
good job dude , nice video :-]
I`m so glad I`ve found your channel, such good information in a good way! Thanks a lot Mac!
Do you have a video of the installation of your new air intake? I`m looking to change mine and and the engine bay looks exactly the same, mine is a 2005 Lancer VRX
If you go for a cold air intake get a short ram I got a K&n tune less one and it got tore up by the battery in normal driving or you could just relocate the battery to the back
Hey since your going to drive your E30 in the next video for the whole turbo build you need a better clutch mainly for every turbo build you need to get a clutch
+EXOTI1CSTANCE :0 Yes, clutch for sure. I haven't installed the turbo yet. I'm gonna start on the engine first.
a long time to see him out new video
Good on ya mate , good video
yes he is a natural good mechcanic!
lancers are the best!!!!!!
Can you do a video on the pistons/piston rings when you get a car to do it on?
Cost of parts and labor for timing belt and water pump? 06 ralliart
You should be a pro tech for mitsubishi
Excellent !! Thaks a lot. It is encouraging.
พี่เคาเก่งมากครับ
hi everyone the car is my car ill take some videos of it and post it to my page :)
So to put tension on the timing belt you tighten the tensioner, put the belt over it, then loosen it so the spring moves it towards the belt then tighten it back down?
Hi ! How did you learn to fix cars like this? By yourself, family or your study ? It's si cool ! Respect dude !
+FireBlàz - League of Legends Hi. I learn it myself.
+DarkDragonWing Incredible ! All the best ! ;)
is this your car ?
Good video like aways
:D
+Alex Jelev :D Not my car. Friend's car.
+DarkDragonWing ok it very sporty
+Alex Jelev its mines
+Kang Lee super car
Looks like you resprayed its and modded the bumper?
+69Phuket Hi, my friend bought this car like this. The previous owner put the modded bumper on it. cheers
Its not his
Thank you for excellent video.
What's also draining with the coolant at 0:56? Do you have to drain the coolant too? Is 1:28 needed to be done by having to turn the key or was it to make it easier for you?
Thank you, for posting this video
If you want to replace the water pump, then you have to drain the coolant. The turning the key is to help un-bolt the crank bolt. If you can get the bolt out with a impact gun, then you don't need to do the key turning method.
Could I use a regular socket wrench or wrench as well?
thanks from the information😊😊
great job! congratulations! thanks
thanks for the video!! do you think the steps and torques will be the same for 2002 Oz Rally?
No problem. Yes, they should have the same engine.