@@CsabiTools your English is great especially being it’s not your every day language. Are you doing these videos just to play with power tools or is this how you make a living? Greetings from Minnesota in the USA.
@@adamo4904 thanks I'm trying to do my best, with this tools I'm working on my property and from time to time I'm working for others to, that's how I make my living.
Hello Csabi Your videos are very helpful last Summer I buy a brand new Fs 461 c in Croatia. Now i Know how I use a Shreder blade or a Circular blade Thak you and Gettings From Germany
Hi, I have purchased a new brush cutter and shredder blade, but I don't have the smaller guard ring that protects the nut. Is there a special reason for using this protective ring, instead of using the one that comes with the machine. (The large one you removed to set up the shredder blade)?
Hello, I don’t know how to explain it if it’s a special reason,the large one it’s for the blade and knife, try to search and buy that small guard ring ( that small guard ring protect the screw , otherwise you may damage the screw , when working with the shredder blade,🙋♂️
Hello Csabi!! 🙋♂Have you changed the screws that screw the clamp to the tube (minute 1:40)??? I bought the clamp for fs561 and I can't screw it like you, I thought it would be allen or torx and it comes with very strange screws that according to the manual: Mounting shredder deflector Owing to the high loads on the shredder deflector (3) and country-specific regulations on the use of the machine for shredding, the deflector must be properly mounted to the machine. A special screwdriver bit is required to mount this deflector. The bit is available only from specialist retailers. it has to special drive for rotating the screws and only allows the screws to be tightened. Once tightened, the screws can not longer be loosened - not even with the special tool. I'm sad I don't have a tool to screw this piece on tight. Greetings and sorry for so much text.😄
Hello I understand perfectly you’re probleme, also I did search that special key for the screw, and I didn’t find it so I changed the screw’s, from where I bought the brushcutter I was able to find other Stihl screw’s and probleme solved, on the Fs 560 I have exactly the same screw’s that you have and already lost 1 screw,🙋♂️
Hei,hei,hei! Am revenit si eu cu comentariile, sincer imi place ca încerci să faci clipuri pentru toată lumea ( Ro/Engleza), parerea mea e ca mai bine făceai de la început clipuri numai în engleză, ca era super bine pentru canal, efectiv bubuia, bine ca si acum e 💪! Te salut.
Salut,Andrei stii de la inceput nu am putut sa anticipez cum va merge acest canal si in ce directie o sa merg cu el, cu siguranta mergea mai bine dc era doar in engleza oricum nu este tarziu nici acuma o sa il ghidez eu pe drumu cel bun, salutari si spor .
Hello mr. Csabi, may I ask you whether this mulching/shredding kit is suitable for my FS 261? Since the length of the blade is 320mm, and in Stihl catalogue they recommended 270mm for my machine!
Hi Mr. Csabi! are you doing good? Can you make a video on ALL safety equipment you have from stihl, and what i and other people need when they use the brushcutter? Thanks alot, grettings
Hi, thank you for your videos. I have a lot of wild blackberries growing on my property. The Stihl FS 460 C-EM is available to buy in my country. Could you please tell me if I would be able to use the shredder blade attachment on the FS 460 C-EM?
That's one of my favorite blades for my KM 130R. The 350mm AireCut blade does a really nice job too. Surprised you haven't shown the the 40-4 SuperCut yet.
@@CsabiTools sorry, wrong name, it's AutoCut 40-4, an old model of string trimmer head with four lines and automatic bump feeding. It's still available on Amazon by a different name, should come up. The SuperCut only comes in 20-2 and automatially advances the string without bumping when the string gets short. The pivotrim head is an eight, six or four line head that needs to be reloaded when the strings get short. Perfect to have in your tool box when you have a big job and are low on string.
Hello, deflector-4148 710 8103. The mounting kit-4148 710 4200. This is the part number for all the kit together with the 320 mm shredder blade-4148 007 1012.🙋♂️
@@CsabiTools for Parkside 2HP from Lidl, I have installed Oregon 4mm blade (and it is superb!!!!), and I want to make 'modification' with this deflector to protect my legs...
Am observat că dacă le tai cu discul se fac la loc mai ceva ca înainte. Do you speak Romanian, Hungarian and Enghish or you know other languages too? :)
Salut da se fac mai mari deoarece se ramifica, ideia este dc le tai tot timpul si nu le lasi sa creasca mari reusesti sa le elimini , mai vb inca franceza.
@@criticulmuzical9120 da e practic cu ierbicid dar prima data le tai cum le-am taiat eu sau prin alta metoda si lastari ce vor iesi ii dai cu ierbicid.
Salut, merci Ionut de raspuns din pacate autocut 46-2 nu este compatibil cu aceasta motocoasa, urmatorul video va fi in romana dar din cand in cand o sa mai fie video si in engleza, salutari si spor.
Full throttle 24/7 shows how inexperienced you are on caring for your tool. You can use a disk or a 3 sided rotor and be more effective than this. Little tip
Hello, I have experience with the brushcutter, if I don’t work on full throttle with this kind of blade, it will tangled itself in the vegetation, thanks for the advice but for tangled vegetation and wild berries like in the video this is the best blade trust me , greetings,🙋♂️
Love the English!! Your videos are great and they’re even better when I can understand what you’re saying! 👍🏼
Thanks for your support I’m glad that you understand my English I will definitely speak it way better after a couple of videos greetings from Romania.
@@CsabiTools your English is great especially being it’s not your every day language. Are you doing these videos just to play with power tools or is this how you make a living? Greetings from Minnesota in the USA.
@@adamo4904 thanks I'm trying to do my best, with this tools I'm working on my property and from time to time I'm working for others to, that's how I make my living.
The video shows clearly how to use the blade and on which type of bush. It was helpful, thanks!
Your welcome, greetings 🙋♂️
Thanks for the English videos, you made a good Job with a great machine. Stihl + Csabi 💪💪💪🔥🔥🔥
You are welcome Leonardo I want that everybody could understand what I’m saying thanks for the support 🙋♂️
Your videos are very informative and helpful. I plan on buying a shredder blade for my FS561C next and a 300mm brush knife.
Hello, thanks, for your Fs 561 you need a 350 mm brush knife,🙋♂️
Hello Csabi Your videos are very helpful last Summer I buy a brand new Fs 461 c in Croatia. Now i Know how I use a Shreder blade or a Circular blade Thak you and Gettings From Germany
Hello, I’m glad that you find it useful, greetings and good luck with your machine,🙋♂️
Thanks for showing.
This was very impressive.
I think now I know which device can do the job that needs to be done.
Glad it was helpful! Greetings 👋
Csabi the Butcher Man great Video Broo🙌🙌And a Great Brush cutter 👏
Yes my friend, thanks keep up the good work greetings,🙋♂️
I love this machine for the farm
Hello it’s an awesome machine i love to very powerful, 🙋♂️
@@CsabiTools My country there are not
@@sdh653 I'm sorry 😞about that
Hi, I have purchased a new brush cutter and shredder blade, but I don't have the smaller guard ring that protects the nut. Is there a special reason for using this protective ring, instead of using the one that comes with the machine. (The large one you removed to set up the shredder blade)?
Hello, I don’t know how to explain it if it’s a special reason,the large one it’s for the blade and knife, try to search and buy that small guard ring ( that small guard ring protect the screw , otherwise you may damage the screw , when working with the shredder blade,🙋♂️
Thank you.
Hello Csabi!! 🙋♂Have you changed the screws that screw the clamp to the tube (minute 1:40)??? I bought the clamp for fs561 and I can't screw it like you, I thought it would be allen or torx and it comes with very strange screws that according to the manual:
Mounting shredder deflector
Owing to the high loads on the shredder
deflector (3) and country-specific
regulations on the use of the machine for
shredding, the deflector must be
properly mounted to the machine.
A special screwdriver bit is required to
mount this deflector. The bit is available
only from specialist retailers. it has to
special drive for rotating the screws and
only allows the screws to be tightened.
Once tightened, the screws can not
longer be loosened - not even with the
special tool.
I'm sad I don't have a tool to screw this piece on tight.
Greetings and sorry for so much text.😄
Hello I understand perfectly you’re probleme, also I did search that special key for the screw, and I didn’t find it so I changed the screw’s, from where I bought the brushcutter I was able to find other Stihl screw’s and probleme solved, on the Fs 560 I have exactly the same screw’s that you have and already lost 1 screw,🙋♂️
@@CsabiTools thanks friend for the help 👍, I have tightened as I could provisionally, when I can I will go looking for other screws 🙋♂
Hei,hei,hei! Am revenit si eu cu comentariile, sincer imi place ca încerci să faci clipuri pentru toată lumea ( Ro/Engleza), parerea mea e ca mai bine făceai de la început clipuri numai în engleză, ca era super bine pentru canal, efectiv bubuia, bine ca si acum e 💪! Te salut.
Salut,Andrei stii de la inceput nu am putut sa anticipez cum va merge acest canal si in ce directie o sa merg cu el, cu siguranta mergea mai bine dc era doar in engleza oricum nu este tarziu nici acuma o sa il ghidez eu pe drumu cel bun, salutari si spor .
Hello mr. Csabi, may I ask you whether this mulching/shredding kit is suitable for my FS 261? Since the length of the blade is 320mm, and in Stihl catalogue they recommended 270mm for my machine!
Hello, unfortunately it will not fit on your machine this shredder blade, it’s too big for you machine, greetings, 🙋♂️
ok! Thank you very much!@@CsabiTools
Hi Mr. Csabi! are you doing good? Can you make a video on ALL safety equipment you have from stihl, and what i and other people need when they use the brushcutter? Thanks alot, grettings
Hello, i already have a video like that on my channel ruclips.net/video/uWE0n2wSBjk/видео.htmlsi=IXsbxC51M1kR31V_ check it out, greetings 👋
I have a Kombi 131r. Can i put this blade on it and what guard do i need?
Hello, sorry you cannot use this blade on a kombi 131r , this blade works only with Stihl Fs 510 511 560 561 , 🙋♂️
Hi, thank you for your videos.
I have a lot of wild blackberries growing on my property. The Stihl FS 460 C-EM is available to buy in my country. Could you please tell me if I would be able to use the shredder blade attachment on the FS 460 C-EM?
Hello yes you can use the shredder blade on the Fs 460 c-em, but a smaller shredder blade .
@@CsabiTools Thank you for replying.
@@angiewhite7357 you’re welcome ☺️
whatta good endorse
👍👍👍
🙋♂️
Jaj Csaba, nagyon rendes vagy, hogy gondoltál ránk! Nagyon tetszik az angol verzió, végre értem amit mondasz! :)
Hello, koszi szepen hat persze hogy gondolok meg dolgozok az angolon de majd bele jovok, ez mar a masodik video angolul, 🙋♂️
@@CsabiTools Így van! Egyre folyékonyabbul fog menni!
Fs 511👍
🙋♂️
Hi Csabi, how much is the weight of this shredder blade ?
Hello, i just locked on the package but it’s nothing mentioned about the weight but i estimate around 400-500 grams,🙋♂️
That's one of my favorite blades for my KM 130R. The 350mm AireCut blade does a really nice job too. Surprised you haven't shown the the 40-4 SuperCut yet.
Hello I really love this blade you can do an awesome job,sorry I don't think I know the 40-4 supercut, this blade it's from Stihl?
@@CsabiTools sorry, wrong name, it's AutoCut 40-4, an old model of string trimmer head with four lines and automatic bump feeding. It's still available on Amazon by a different name, should come up. The SuperCut only comes in 20-2 and automatially advances the string without bumping when the string gets short. The pivotrim head is an eight, six or four line head that needs to be reloaded when the strings get short. Perfect to have in your tool box when you have a big job and are low on string.
Oh and there's the SuperCut 40-2, and many others, AutoCut 36-2, 46-2 and 56-2 that hold different amounts of trimmer line.
@@1d1hamby now I understand but I have videos on my channel with all those trimmer heads: durocut 40- 4 autocut 46-2 and autocut 56-2.
@@CsabiTools Duro-Cut is just fixed line, where AutoCut 40-4 is a bump feed 4 line head.
That should be daylong size of piston for repair.
Hello, this is a professional machine and you can do that job without no problem.😉
Can you please give us the link of the shredder blade and deflector and the harness
Sorry I don’t have the link because I bought them from a store in France,🙋♂️
mr csabi. why is this new machine have Red Stihl embedded name? . it used to have black letter . New design?
Hello, this machine it’s brand new it’s 2021 release and they changed the colors, yes it’s a new design, personally I like the new color,🙋♂️
Turkiyeden nasıl sipariş verebilirim
Big difference betwen fs511 and fs561?
Hello, yes it’s a slightly difference, not that big difference 🙋♂️
Hi,
Please write the STIHL catalogue part number for:
- the deflector (guard) and for
- the mounting kit.
Thank you!
Hello, deflector-4148 710 8103. The mounting kit-4148 710 4200. This is the part number for all the kit together with the 320 mm shredder blade-4148 007 1012.🙋♂️
@@CsabiTools please what is the inner diameter in mm of the mounting kit, and outher diameter of the tube where mounting kit is to be mnunted
@@cingeconge4565 for what brushcutter do you want to use it?
@@CsabiTools for Parkside 2HP from Lidl, I have installed Oregon 4mm blade (and it is superb!!!!), and I want to make 'modification' with this deflector to protect my legs...
The outher diameter off the tube it’s 4 cm this it’s the biggest tube from Stihl I don’t think that it will match with your brushcutter.
prize? ?
Hello , approximately 1200 € ,🙋♂️
indian priz e
plij tell me
Salut, ce faci cu tulpinile alea care rămân? Le tai cu discul?
Salut, da ori cu discul ori cu alte unelte cu o foarfeca mare sau cu o topor mai mic .
Am observat că dacă le tai cu discul se fac la loc mai ceva ca înainte.
Do you speak Romanian, Hungarian and Enghish or you know other languages too? :)
Salut da se fac mai mari deoarece se ramifica, ideia este dc le tai tot timpul si nu le lasi sa creasca mari reusesti sa le elimini , mai vb inca franceza.
e mai simplu cu erbicid total.
@@criticulmuzical9120 da e practic cu ierbicid dar prima data le tai cum le-am taiat eu sau prin alta metoda si lastari ce vor iesi ii dai cu ierbicid.
Can that blade work on my Stihl FS 510
Hello, yes it’s compatible with your Fs 510 ,🙋♂️
Okay thank you for your help
Salut csabi!Oare auto-cut-ul 46-2 este compatibil cu o motocoasa stihl fs 235? Și când vine un video în romana?Nu prea înțeleg engleza😂😂❤
Pt 235 având 2.1cp îți recomand Autocut c26-2 cu diametrul maxim 2.7mm. eu am 235 și așa a venit cu c26-2
Salut, merci Ionut de raspuns din pacate autocut 46-2 nu este compatibil cu aceasta motocoasa, urmatorul video va fi in romana dar din cand in cand o sa mai fie video si in engleza, salutari si spor.
@@CsabiTools
🤝💪
Mulțumesc frumos!
@@Pecke1234 ___________
Много добра машина.Но аз предпочитам да ползвам диамантина
Salut am un fs 90 ce parere ai de el?
You just need one lesson and a few hours of work 👍👍
Ok , thanks for the advice,🙋♂️
Salut Csabi
Salutare Bogdan 🙋♂️
Не жарко в этом костюме?))
Hello, yes it is 😂
We can’t get that in America 🇺🇸
Hello, yes I know, you are not the first person who says that,🙋♂️
@@CsabiTools that thing is amazing! I want one! Does America get things that you do not?
@@Zanderthelab Hello, there was another person from America who needed , and he ordered online from the UK or Europe I don’t remember.
HOLA COMO VA MAQUINA PASTO 😊😊
PASATE LINDO
🙋♂️
Hi❤🎉😮
Hello,🙋♂️
Y
🙋♂️
Full throttle 24/7 shows how inexperienced you are on caring for your tool. You can use a disk or a 3 sided rotor and be more effective than this. Little tip
Hello, I have experience with the brushcutter, if I don’t work on full throttle with this kind of blade, it will tangled itself in the vegetation, thanks for the advice but for tangled vegetation and wild berries like in the video this is the best blade trust me , greetings,🙋♂️
Catastrophe ta coupe
Salut pour quoi tu pense que ma coupe ce catastrophe, explique moi que est ce que j’ai pas fait bien dans cette vidéo?
Πολύ χαμηλά έχεις το χορτοκοπτικο συκωσετο λίγο ποιό πάνω ρύθμισε τη ζωνη
Hello, thanks, but I like it like that,🙋♂️
👍👍👍👍
Salutare 🙋♂️
Can that blade work on my Stihl FS 450
Hello, sorry it’s not compatible with your machine it’s way to big for your machine , you need a smaller one,🙋♂️
Salut am un fs 90 ce parere ai de el?