A strong woman is so beautiful! You will be successful in life and I hope you get your deer after all your hard work. Make sure your shooting lanes are clear . Can't wait to go see you get one. Good luck !
When you're shooting the crossbow the view of the surrounding countryside and your property is just absolutely stunningly gorgeous. What a place to live!
Here is another vote to please add support blocks under each step of the ladder. Screws aren't designed for lateral support and will shear off. Please do it sooner than later so you don't forget. Great job on everything so far.
@@Brett33 A 3 in deck screw has a shear strength of about 80 lbs . So two screws would support our Heidi. I would recommend some deck adhesive like pl400 . And go to a 3.5 inch deck screw . 2 to a side.
Looks great ....I did a lot of tree stand hunting ...Personally not a fan of Heights so .The ladder and the entire platform have that movement I just would not feel comfortable with. Anything to feel like you are on soild ground..Cross bracing on the platform and the ladder with less of an angle .. Maybe straight up :) Just my 2 cents
Looks good. I would suggest adding a larger longer screw 3.5 or 4 inch to predrilled holes to each rung. No problem for you, that you weigh nothing, but your dad or other guys you want it strong. Maybe a thin cross brace would stiffen your ladder too. If you move the ladder to a side, you can drive under it with your side by side to get to your fields. L brackets would probably be sturdy to anchor the ladder to the top. If you drive some metal fence posts next to each leg you could use metal strapping to anchor the legs down for wind and such. You are doing great learning as you as you go.
I’m so proud of your not scared of anything it’s Awesome that you can take care of yourself you can run power tools and when you took that plywood and put it up there all by yourself that was Awesome and setting up the blind up there so Incredible and you can Fish you can hunt wow never change who you are your Amazing 🙌🏽
To strengthen your ladder, drill a 1/4 inch hole through each side rail under each step. Put 1/4 inch all thread rod through the holes. Nuts and washers on the out side of each side rail. To attach to the top of the stand with heavy L brackets. Move the base in closer to the bottom, this puts more side rail above the stand. Makes it easier to get from ladder to stand and from stand to ladder.
Hi from a New Zealand Wolfpack member 👋. Safety first, 👀 when cutting, light steel angle brackets on your ladder for each step will last a long time. And David R is correct, watching your enjoyment and being happy with yourself when you have accomplished something is a joy to watch👍😍
Your show is so awesome, rarely do you get to see someone so down to earth show how wonderful life can be in real life situations that they love !!! Thank you so much !!!
Build a small flatbed trailer for the water tank so the 4wheeler can tow it into position. Get help to move ladder to either side of the blind (parallel with the trail) to keep the opening free for game or maintenance of food plot.
The wood you used for the flooring on your blind platform won't hold up to the weather very well long term. You really should paint it like really thick on all side, top bottom and edges. As someone who's been around construction my whole life I would recommend using decking boards, or if you're going to use some kind of plywood I would use Advantec sub flooring its a little more expensive but its the best.
Was going to say the same thing re: plywood vs decking boards. The water will collect on plywood and there will be rot issues after sun/rain weather cycles.
Don’t forget that the ladder is pushing the top of the stand when a load is put on it. (bringing the ladder closer to the stand will decrease the push.)
I enjoy watching the determination and pride you have in accomplishing the task you performing. It's a very endearing quality that becoming rare to see in people now a days.... Just keep being you miss Heidi.
Well Red I don't know what to say other then I think it's AWESOME you are a girl who will tackle any problem. I love the videos and look forward to them every week. Miss the fishing but happy your still doing your thing outdoors. Be careful on that stand and good luck on opening day. Remember when you have never done something before it can go not as planned, doesn't mean your a Goober, means your human. Cheers.
Just for safety of the steps you could put in blocks under each step, or get the metal "L" brackets to screw in under each side. That is from experience, my father had one step go out once with a ladder built like that. Now all the stands with the elevator brackets have either normal steps (4 ft high) or ones built with blocks under each step. Hurricane straps also work good for securing the ladder, instead of rafters to the walls in homes.
Buying some Irwin quick clamps( don't buy cheap ones) will not only make sawing easier, but when you have to push that plywood up the ladder, you can put a couple quick clamps on the bottom edge of the plywood, then push the ply wood up and the clamps will hold it on the rung above, then push it up again to the next rung or two and let the clamps hold it on the ladder as you move up.
A amazing job. You're doing great on your raised blind. I can't hardly wait to see it finished. Thank you for sharing this with us today. And God bless you. 🙏❤🙏❤🙏😊😊😊
Hey Lil Red, you are doing excellent with your elevated blind. Might I make one suggestion that may prevent an unwanted fall. You should screw some braces on the inside of the ladder rails between each rung to give each step extra support. with only two screws from the outside the steps will weaken and split over time. Just want you to be safe.
It's great to see you grow and learn all by yourself and by listening to the wolf packs comments. Instead of making your steps straight on your ladder you should try to get your angle from ground to blind a slightly angle your foot holds so it's easier to climb especially in the winter
On some of the rungs the screw's weren't sucked up all the way, so when you go back to block underneath them run em' in until it pulls it in all the way! Your screw head may be 1/4 inch deep into the wood but that's normal
It is great running across your latest post because I had become very bored and depressed with the other channels that I had been watching and was about to turn it off and then you popped up, your always refreshing and drama-free with interesting content.
just an idea put a 2x4 from one leg to the other cross ways about six feet up touching your ladder underneath and the ladder wont bend then drive two stakes at the bottom of the ladder and screw them down we use silt paper fence the black kind to hide our view from the deer you got this all on your own
Very cool young lady! That’s a lot of weight on those steps carrying that plywood! I was holding my breath, that one didn’t split on you! 🙏❤️. Very admirable, 👍🏼👍🏽👍🏼, cool crossbow, and great shooting!
You might want to talk to someone about the ladder construction. Screwing into the end grain of the steps isn't really that secure with it out in the weather.. Over time the screws could work loose... and putting some 6 or 8 ft. angle braces from the platform to the legs front and back would sturdy it all up quite a bit..
Aside from adding blocks under each step as I’ve seen others mentioned it would be a good idea to sister on some 2x6’s or even better 2x8’s to your 2x4 rails on each side of the ladder with a couple screws every 16 inches to help keep it from folding in on you. Just takes one weak spot in a 2 x 4 for it to snap and bring the whole ladder down. Might also consider adding cross braces on the two open sides of the platform just like the two sides that already have them. As a professional carpenter I always in admire the tenacity of somebody willing to jump in there and just do it. Cheers 🍻
OSB sheet wont last water will destroy it and it will be dangerous. You need a good marine grade plywood and i t would not hurt to seal it with Thompsons water sealer also. Safety first! That stand for sure needs some railing!
Not being a wise guy, but could you buy an extension ladder? 2x4's end screwed for steps is bad news if the step splits as your on it 10 feet high. Plus the extension ladder can be used elsewhere. Just a thought, be safe.
Yeah, I agree ! Use an extension ladder. BUT, if you use your wooden ladder at least put some support brackets on the ladder steps. I would have also put some support brackets on the floor supports.
@@bryanstaten5585 @ least use 2 screws per side each wrung & drill pilot holes lessens chance of splitting , that one wrung u could see daylight thru it and the 2X4 < very unsafe . Tighten them all up maybe even counter sink them , ifd u have pilot holes drilled they will suck right in & be much stronger !
Follow the sight in process in that ravin with the scope and you can shoot up to 100 yard. I did it for my dads r26 and the 20 yard pin all the way to 100yard pin was dead on. Good luck on the season.
It looks like you installed a wafer board deck instead of pressure treated plywood deck, which is only suitable for roofs when there is actually roofing that protects it from the rain. When exposed to rain, it swells and then desintigrates. Although your pop up tent can provide some rain protection, it won't provide the rain protection around the edges. The pop-up tent needs to be well fastened to the deck in order to keep the wind from blowing it off the deck. For roofing, you can roll on an ice and water shield, and then a roll on a mineral surfaced peal and stick top roofing layer. Let both droop over the sides by at least an inch so the water drips to the ground instead of soaks back into the water board.
When she had the ladder stuck on her shoulders and had to wiggle through 🤣. I can relate. I tried to setup a larger tree stand by my self 🤣. I felt your pain.
Hey Heidi, good to see you posting again, missed you. I'm glad you are feeling better. I'm also looking forward to deer hunting again this year in West Virginia, good luck to you!
I can tell you love what you are doing, and I think its what makes your content great. It's a breath of fresh air these days to say the least. This deer stand reminds me of some of the first ones that I built, well actually yours if much better than where mine started. I enjoy the stand building, and food plots just as much or more these days then the actual hunting. It just feels so great when it all comes together and pays off, and especially knowing that you did it all on your own. A few small tips: Move your ladder to the woods side, cut a small walk trail flanking your access road, just long enough to get to, and especially from the stand without the deer seeing you, and it also allows the passage of your bike. I assume your deer are like where I am from, and they typically feed right before dark. Once they bust you climbing down from your stand a few times they will just come to the plot later and later, so that stealthy entry and exit is super important! When the leaves fall, rake the last 20 or so yards of leaves and sticks out of the way, so you can enter and exit the stand without making a sound. Last one: I see a lot of people pointed out the steps as a safety issue. I doubt someone of your stature would ever have an issue, but you may have some family or friends that will use it, and they may not be as petite as you are. I used these to secure my studs to the metal purlins when I build our house and can vouch for their sturdiness. I would use 1" deck screws with them. Search on Amazon: "YEWLACA 16 PCS Stainless Steel Corner Braces L Bracket for Wood 40mm x 40mm 90 Degree Right Angle Bracket Joints L Shaped Corner Bracket Fastener with Screws." They are stainless, cheap and strong and should resolve everyone's concerns with minimal expense and effort on your part. Good luck, and keep making these great videos!
@Marquis 912 Really what are you 12? You sound like a child in school. Calling people names and shit like a child. You've been failed. Hopefully you'll mature and get wiser as you age. Legit hopeful or you generation is screwed otherwise I can see you guys going full commie so big brother can hold your hand and gives you a trophy for participating. Your here watching the vids to obviously. What's wrong don't know how to describe what you see like your peer there? Use your words boy..
Nice job on the stand Heidi, if you don’t mind a little advice though, you put cross bracing on only two sides, you should definitely put it on the remaining two side and that will stiffen the whole thing for your safety.
@@LilRedHeidiHood You can use "knee" braces on those two sides and still have room to drive under. Just use short pieces of 2x6 or 2x8 for the braces instead of 2x4s. That'll work!
Heidi If you put some 45 degree braces on the openings that you drive under up high so they are out of the way going under it will stiffen the whole stand up and keep it from racking and twisting causing it to fail. Also go ahead and put supports under each step. You may also want to put some all thread rod under the steps from side to side in a few places to help it from pulling apart.
Glad to see you back, and moving forward on your stand. Those rungs look pretty dicey since they are now tight against stingers/rails, they are suspended in the air with screw ends. Be careful, even put a support under those so they can not push down while climbing, do not forget to secure your blind also. Keep videos coming , thanks.
Thanks for the laugh as you were getting the ladder up. I could almost see your brain working. As I was talking to the TV to you on how to do it. Lol😁😘
Make all of your bracing large right triangles.......use 3" screws and leave areas for bolts with fender washers and elastic stop nuts. use stainless steel hardware.....
I hunted a stand once in Alabama that they used ratchet straps to secure it to the ground and it drove me crazy. The stand was set up along a huge field that always seemed to have high winds and the ratchet straps would flutter in the wind and the vibration would resonate throughout the stand and you couldn’t hear yourself think. On a good note the sounds didn’t bother the deer, they would walk right by the stand and not give it a second look. A steel cable and a turn buckle may not be affected by the wind as much. Just a thought, good luck.
Was just about to comment the same. Aircraft cable, earth anchors and turnbuckles. Reinforce the ladder, blocks under the rungs, move it to the side so it doesnt block the trail and add a handrail at the very top for the transition.
I thought I was the only one that had issues with BIGFOOT!!!! I'm glad you are getting your hide ready for the season. I hope you get a big one this year.
Hunting season in north east Ohio,is over, coyotes is about it, spring steelhead in grand River, smallmouth in the summer, treasure hunting,parks,Beach,always something to do on the weekends Deer in the fall ,swat x1- an a 10 point, their local to me, Some real Big deer in North East Ohio 232# 10 pointer is my best yet , archery season in 2023, can’t wait!~Best Regards
Good luck this year I wish you a successful bow hunting season 👍 I to am a bowhunter season has been open up here back in September 15 getting out soon myself been waiting for colder weather and it's here and the deer are moving time to get in the stand 👍🦌
I encourage you to practice shooting from the same height and conditions. Standing or sitting. The trajectory of the arrow 🏹 flight ✈️ will change. Whatever you choose to secure the stand with, remember you will be climbing up in the dark. Stay safe and happy hunting 😊
If you ever build another one, I'd sheet your deck first before standing your blind up, the little bit of extra weight would save you alot of extra work sheeting it in the air. Also, you should pre-fab as much as you possibly can on the ground(temporarily). then dis-assemble anything you've built and rebuild it once your stand has been erected, this way, you will know everything fits and will probably save you alot of trips up and down your ladder. ;) (Scratch this last idea, as I see you just used a pop-up tent) lol. Speaking of ladders, I'd buy a cheap 2nd hand (or new) aluminum extension ladder, would be much lighter and guaranteed not to rot from weather exposure, eventually weather will reek havoc on your ladder steps........I'd hate to see you fall and get hurt!! Happy hunting !! 🦌
C’mon Heidi safety goggles please. Got to protect those gorgeous eyes of yours. Enjoying watching you do this project. Looking forward seeing the finish product. Good luck.
Yes please wear appropriate PPE for your protection. Add respirator when using all spray chemicals including painting w primer especially if you enjoy your sense of smell... Keep up the great work! 🌹⚡️🇺🇸
You were game sliding that decking up, I agree with the others who told you to support the ladder rungs, not only your weight but with the decking weight too pushing against the rungs, I'm happy to see you made it to the top without mishap. Also please when cutting the board make sure the power cable is well out of the way of the saw, I nearly had a heart attack that power cable was so close to being cut. Take a look at the replay please. Apart from those things I give you credit for trying by yourself, great work, keep safe.
Use to watch "Growing Deer tv" channel. They planted crops for feed lots, then pulled a few plants from different parts of the plots to have them tested for vitamins and minerals, especially calcium for the racks. If something was missing, they would add it to the soil to give the deer the best diet, and the biggest racks. They have it down to a science and well worth watching.
You my dear sure can make a guy chuckle! So fun to watch. That ladder is more crooked than a politician! And an osha violation! But I applaud your ambition and hard work you do. Gosh I wish I was there to help. But I know satisfaction comes with doing it all by yourself. Research so you don’t get hurt! Cause I don’t want to cry!!! Shoulda heard me yell stop! When you attempted to climb that ladder!!!!!!
the locations are so amazing which always remains a highlight of your videos. Such lonely , quiet and serere places and that mystical music that nature creates is so joyous in itself. as an Indian its hard for me to find such places with so many trees and greenery, with leaves rattling all over. I can only picture myself being in those locations watching your videos. Good job Girl. Respect from India
Add a ratchet strap halfway up the ladder and to one of the stand's legs...that'll take a lot of the flex in the ladder out and firm it up some for you. Enjoy watching your problem solving and solutions, and since it seems to fit you as well, I'll share my credo...Aut Viam Invenium, Aut Faciam. I'll find a way, or I'll make one. Stay safe!
There's no shortage of recommendations that you need to reinforce the ladder as it is sketchy AF, but on a side note to better steady your shots with your crossbow I would recommend a pr of shooting sticks like the Primo's Trigger stick. I bought 1 for my son and it's a great shooting aid to steady your shots for better shot placement.
I don't have crossbow experience but I thought her stance looked odd. Standing straight up and straight ahead. Is that the proper way to shoot a crossbow? I would expect one to stand kind of diagonal more like shooting a "regular" bow or a gun...
Omg Heidi! Great job on the stand but... the ladder scares the living crap out of me! When u were pushing up the plywood for the floor I was praying the steps held! I saw gaps between the step and upright cause they weren't sinched together tightly! Two screws on each side should be sufficient, make em tight though girl! And it should be good for this year but next summer instead of having them between put them on the face and then cut an angle on the top to sit better against the stand! U should be plenty safe that way! Love everything about u and all u do would hate to see u get hurt! Cant wait to see the monster buck your gonna shoot this year!😘
On those rungs where the rail does not go all the way to the edge of the rung you need to get a clamp or strap to bring the run and rail together and finish driving the screws all the in or else the ladder will fail sooner than need be. To strengthen the ladder further and help support the rungs it would also be a good Idea to cut some 1" by 4" blocks and attach them butted directly under each side of all the rungs. If one fails while you are close to the top when climbing it could cause you to fall and be badly injured. Don't want that.
Ah you build a housie in the sky. Very impressive indeed man. Thank you for sharing. Just wondering if you going to take your puppy up there as well? Take care and God Bless. 💖
I made a target out of a 50# feed bag, stuffed it with old T-shirts from Good Will, and none of my arrows shot with a 60 pound compound bow went through. Also I can pull them out with 2 fingers. Don't use Jean's or any heavy material, or they will be much harder to pull out. Pretty sure your cross bow can't shoot through them either. Much cheaper than a store bought target and easier to use.
Wow you ma’am are gorgeously beautiful, really like how you can see something in your mind and then make it happen. I can’t say for anyone else but with that 2nd attempt with the ladder I was saying along what you ended up doing. Just a great job keep it up.
you 100% need a SAFTY HARNESS for that height.... i could not even imagine being in a blind at that height with no type of safety device!!!!!!!!!!!!!!!!!! please think about it. good luck nice job lets make it safe too...the ladder needs reinforced also.. you have done a heck of a job...now stay safe...you are very talented but this build is impressive but needs many improvements to be safe.
Hey Heidi, a bit of advice for what it’s worth, my wife and i bow hunted for years and the best practice you can ever do is buy a 3-D deer target and practice a lot out of your stand, it will make you an excellent shot in know time, shooting from a hight is a lot different than shooting standing on level ground. And please be very careful on that ladder and stand, i don’t think my heart could take seeing you fall off of it and getting hurt. Good luck with your hinting, hope you get a biggin’
This woman continues to be entertaining. When she says something should be simple to do, like filling the tank with water, you just KNOW something's gonna happen next. Never fails. It's all good though. We're all human and stuff happens.
She is very beautiful but also very independent and also has a very supportive family around her, much love and respect to you babe all the way from the UK England ❤️
A strong woman is so beautiful! You will be successful in life and I hope you get your deer after all your hard work. Make sure your shooting lanes are clear . Can't wait to go see you get one. Good luck !
When you're shooting the crossbow the view of the surrounding countryside and your property is just absolutely stunningly gorgeous. What a place to live!
Here is another vote to please add support blocks under each step of the ladder. Screws aren't designed for lateral support and will shear off. Please do it sooner than later so you don't forget. Great job on everything so far.
Yeah , those rungs that are not touching the side rail and only being supported by the screws were making me all kinds of nervous .
@@Brett33 A 3 in deck screw has a shear strength of about 80 lbs . So two screws would support our Heidi. I would recommend some deck adhesive like pl400 . And go to a 3.5 inch deck screw . 2 to a side.
Yea that’s why I said double screws until then
Looks great ....I did a lot of tree stand hunting ...Personally not a fan of Heights so .The ladder and the entire platform have that movement I just would not feel comfortable with. Anything to feel like you are on soild ground..Cross bracing on the platform and the ladder with less of an angle .. Maybe straight up :) Just my 2 cents
Grk screws are rated for shear like nails.....new technology everyday
A Corset and a Bow.. yup! You Rock my World and time stops...then picks up again.. Thank You.
Looks good. I would suggest adding a larger longer screw 3.5 or 4 inch to predrilled holes to each rung. No problem for you, that you weigh nothing, but your dad or other guys you want it strong. Maybe a thin cross brace would stiffen your ladder too. If you move the ladder to a side, you can drive under it with your side by side to get to your fields. L brackets would probably be sturdy to anchor the ladder to the top. If you drive some metal fence posts next to each leg you could use metal strapping to anchor the legs down for wind and such. You are doing great learning as you as you go.
I’m so proud of your not scared of anything it’s Awesome that you can take care of yourself you can run power tools and when you took that plywood and put it up there all by yourself that was Awesome and setting up the blind up there so Incredible and you can Fish you can hunt wow never change who you are your Amazing 🙌🏽
To strengthen your ladder, drill a 1/4 inch hole through each side rail under each step. Put 1/4 inch all thread rod through the holes. Nuts and washers on the out side of each side rail.
To attach to the top of the stand with heavy L brackets. Move the base in closer to the bottom, this puts more side rail above the stand. Makes it easier to get from ladder to stand and from stand to ladder.
She also needs longer screws in each step to start with....at least 3.5 - 4"
Hi from a New Zealand Wolfpack member 👋. Safety first, 👀 when cutting, light steel angle brackets on your ladder for each step will last a long time. And David R is correct, watching your enjoyment and being happy with yourself when you have accomplished something is a joy to watch👍😍
Your show is so awesome, rarely do you get to see someone so down to earth show how wonderful life can be in real life situations that they love !!! Thank you so much !!!
You're every man's dream woman. Beautiful, smart, humble, genuine, capable and independent.
not mine!
@@friendlyvoice9720 Its ok to be gay buddy
Knows more about hunting than most guys 😊
Yes she is in every inch:) second lara croft:)
Um...speak for yourself pls.
Build a small flatbed trailer for the water tank so the 4wheeler can tow it into position. Get help to move ladder to either side of the blind (parallel with the trail) to keep the opening free for game or maintenance of food plot.
Your more handy than most guys. Love your passion for the outdoors and your can do, go get it attitude. 💪 God bless you.
The wood you used for the flooring on your blind platform won't hold up to the weather very well long term. You really should paint it like really thick on all side, top bottom and edges. As someone who's been around construction my whole life I would recommend using decking boards, or if you're going to use some kind of plywood I would use Advantec sub flooring its a little more expensive but its the best.
True, should have used pressure treated deck boards .
Was going to say the same thing re: plywood vs decking boards. The water will collect on plywood and there will be rot issues after sun/rain weather cycles.
Don’t forget that the ladder is pushing the top of the stand when a load is put on it. (bringing the ladder closer to the stand will decrease the push.)
And nice progress but not too safe. You might need blocks under each side of every step and 4 " screws through each step from the outside.
Exactly
Absolutely. Good advice!
Dang. She,s good!!! Tough fiber young lady. Stay strong . You are blessed from Above!!
I enjoy watching the determination and pride you have in accomplishing the task you performing.
It's a very endearing quality that becoming rare to see in people now a days.... Just keep being you miss Heidi.
INDEED
Well Red I don't know what to say other then I think it's AWESOME you are a girl who will tackle any problem. I love the videos and look forward to them every week. Miss the fishing but happy your still doing your thing outdoors. Be careful on that stand and good luck on opening day. Remember when you have never done something before it can go not as planned, doesn't mean your a Goober, means your human. Cheers.
Just for safety of the steps you could put in blocks under each step, or get the metal "L" brackets to screw in under each side. That is from experience, my father had one step go out once with a ladder built like that. Now all the stands with the elevator brackets have either normal steps (4 ft high) or ones built with blocks under each step. Hurricane straps also work good for securing the ladder, instead of rafters to the walls in homes.
Exactly, all her weight will just be on the screws now , simple blocks under will nukeproof it.
Thanks for the tip!
You going in up hurting yourself need to be careful little red
@@larryyancey5554 you need to learn to string a sentence together 🤦♂️
Buying some Irwin quick clamps( don't buy cheap ones) will not only make sawing easier, but when you have to push that plywood up the ladder, you can put a couple quick clamps on the bottom edge of the plywood, then push the ply wood up and the clamps will hold it on the rung above, then push it up again to the next rung or two and let the clamps hold it on the ladder as you move up.
A amazing job. You're doing great on your raised blind. I can't hardly wait to see it finished. Thank you for sharing this with us today. And God bless you. 🙏❤🙏❤🙏😊😊😊
As a fellow virginian.. wish you the best of luck this season.. its been slow in our area
Hey Lil Red, you are doing excellent with your elevated blind. Might I make one suggestion that may prevent an unwanted fall. You should screw some braces on the inside of the ladder rails between each rung to give each step extra support. with only two screws from the outside the steps will weaken and split over time. Just want you to be safe.
It's great to see you grow and learn all by yourself and by listening to the wolf packs comments. Instead of making your steps straight on your ladder you should try to get your angle from ground to blind a slightly angle your foot holds so it's easier to climb especially in the winter
On some of the rungs the screw's weren't sucked up all the way, so when you go back to block underneath them run em' in until it pulls it in all the way! Your screw head may be 1/4 inch deep into the wood but that's normal
It is great running across your latest post because I had become very bored and depressed with the other channels that I had been watching and was about to turn it off and then you popped up, your always refreshing and drama-free with interesting content.
just an idea put a 2x4 from one leg to the other cross ways about six feet up touching your ladder underneath and the ladder wont bend then drive two stakes at the bottom of the ladder and screw them down we use silt paper fence the black kind to hide our view from the deer you got this all on your own
Very cool young lady! That’s a lot of weight on those steps carrying that plywood! I was holding my breath, that one didn’t split on you! 🙏❤️. Very admirable, 👍🏼👍🏽👍🏼, cool crossbow, and great shooting!
You are one of the most stunning and natural beauties out there! Thanks Heidi 👏
Natural 😂 even God would say yeah I didn't make that 😂 girl so full of plastic she's recyclable 😂
I admire your persistence. you refuse to give up. great job
You might want to talk to someone about the ladder construction. Screwing into the end grain of the steps isn't really that secure with it out in the weather.. Over time the screws could work loose... and putting some 6 or 8 ft. angle braces from the platform to the legs front and back would sturdy it all up quite a bit..
Aside from adding blocks under each step as I’ve seen others mentioned it would be a good idea to sister on some 2x6’s or even better 2x8’s to your 2x4 rails on each side of the ladder with a couple screws every 16 inches to help keep it from folding in on you. Just takes one weak spot in a 2 x 4 for it to snap and bring the whole ladder down. Might also consider adding cross braces on the two open sides of the platform just like the two sides that already have them. As a professional carpenter I always in admire the tenacity of somebody willing to jump in there and just do it. Cheers 🍻
OSB sheet wont last water will destroy it and it will be dangerous. You need a good marine grade plywood and i t would not hurt to seal it with Thompsons water sealer also. Safety first!
That stand for sure needs some railing!
Yeah, I agree.
It's only temporary.wgen she is done it will have walls with windows cut out and a roof..the inside will stay dry..
@@eugenelaky1993 She is about the age of my own daughter this just worries the crap outta me.
Love the determination with the Latter build.
Not being a wise guy, but could you buy an extension ladder? 2x4's end screwed for steps is bad news if the step splits as your on it 10 feet high. Plus the extension ladder can be used elsewhere. Just a thought, be safe.
I agree.....much safer and stronger !
Yeah, I agree ! Use an extension ladder. BUT, if you use your wooden ladder at least put some support brackets on the ladder steps. I would have also put some support brackets on the floor supports.
Heidi an extension ladder will make noise when climbing, just reinforce what you have.
Worried about that very thing, myself
@@bryanstaten5585 @ least use 2 screws per side each wrung & drill pilot holes lessens chance of splitting , that one wrung u could see daylight thru it and the 2X4 < very unsafe . Tighten them all up maybe even counter sink them , ifd u have pilot holes drilled they will suck right in & be much stronger !
Follow the sight in process in that ravin with the scope and you can shoot up to 100 yard. I did it for my dads r26 and the 20 yard pin all the way to 100yard pin was dead on. Good luck on the season.
It looks like you installed a wafer board deck instead of pressure treated plywood deck, which is only suitable for roofs when there is actually roofing that protects it from the rain. When exposed to rain, it swells and then desintigrates. Although your pop up tent can provide some rain protection, it won't provide the rain protection around the edges. The pop-up tent needs to be well fastened to the deck in order to keep the wind from blowing it off the deck. For roofing, you can roll on an ice and water shield, and then a roll on a mineral surfaced peal and stick top roofing layer. Let both droop over the sides by at least an inch so the water drips to the ground instead of soaks back into the water board.
Yeah, she has no idea on most construction topics. Scary.
Oh jeez .. I should’ve known better than to ask the guy at Lowe’s for help picking out my plywood 😂
@@LilRedHeidiHood They make really good points, but the better quality wood will get heavier and be hard to carry up the ladder.
@@LilRedHeidiHood just give it a coat of waterproof paint 🤷♂️ the osb board will last alot longer
@@LilRedHeidiHood HE WAS OVERWHELMED BY YOUR STUNNING BEAUTY AND LOST HIS MIND
When she had the ladder stuck on her shoulders and had to wiggle through 🤣. I can relate. I tried to setup a larger tree stand by my self 🤣. I felt your pain.
Hey Heidi, good to see you posting again, missed you. I'm glad you are feeling better.
I'm also looking forward to deer hunting again this year in West Virginia, good luck to you!
I can tell you love what you are doing, and I think its what makes your content great. It's a breath of fresh air these days to say the least. This deer stand reminds me of some of the first ones that I built, well actually yours if much better than where mine started. I enjoy the stand building, and food plots just as much or more these days then the actual hunting. It just feels so great when it all comes together and pays off, and especially knowing that you did it all on your own. A few small tips: Move your ladder to the woods side, cut a small walk trail flanking your access road, just long enough to get to, and especially from the stand without the deer seeing you, and it also allows the passage of your bike. I assume your deer are like where I am from, and they typically feed right before dark. Once they bust you climbing down from your stand a few times they will just come to the plot later and later, so that stealthy entry and exit is super important! When the leaves fall, rake the last 20 or so yards of leaves and sticks out of the way, so you can enter and exit the stand without making a sound. Last one: I see a lot of people pointed out the steps as a safety issue. I doubt someone of your stature would ever have an issue, but you may have some family or friends that will use it, and they may not be as petite as you are. I used these to secure my studs to the metal purlins when I build our house and can vouch for their sturdiness. I would use 1" deck screws with them. Search on Amazon: "YEWLACA 16 PCS Stainless Steel Corner Braces L Bracket for Wood 40mm x 40mm 90 Degree Right Angle Bracket Joints L Shaped Corner Bracket Fastener with Screws." They are stainless, cheap and strong and should resolve everyone's concerns with minimal expense and effort on your part. Good luck, and keep making these great videos!
This lady is so beautiful, she is almost unreal. My lord she uses power tools and hunts as well? Omg she is the apex of womanhood.
Yeah its pretty insane huh... Def the most beautiful woman ive ever seen..
She's not yur average Woman .....
camping, fishing & hunting 🍻
Big Simpin' lol
@Marquis 912 Really what are you 12? You sound like a child in school. Calling people names and shit like a child. You've been failed. Hopefully you'll mature and get wiser as you age. Legit hopeful or you generation is screwed otherwise I can see you guys going full commie so big brother can hold your hand and gives you a trophy for participating.
Your here watching the vids to obviously. What's wrong don't know how to describe what you see like your peer there?
Use your words boy..
You go girl. WOW. Love the country in you. You stand on your own two feet.
there is steel hooks you can mount to the top of the latter and brace it in the floor joist or tie it to your joist using some decent rope
I want to reach into this screen and help you so bad!! You're doing a great job of improvising!
Screw a 2X4" to the stand corner post (minimum 2 scrws an end) then to ladder Side 1/2 way up then all the wiggle/sway gone.
You are so blessed, I wish I could live like you, God bless you!
Nice job on the stand Heidi, if you don’t mind a little advice though, you put cross bracing on only two sides, you should definitely put it on the remaining two side and that will stiffen the whole thing for your safety.
I agree but then I won’t be able to drive my side by side underneath
@@LilRedHeidiHood what if you added cross bracing above the height of the side-by-side? Anything to help it wobble less.
At least gusset the open sides on all four legs, that should stiffen it up without blocking your path.
@@LilRedHeidiHood You can use "knee" braces on those two sides and still have room to drive under. Just use short pieces of 2x6 or 2x8 for the braces instead of 2x4s. That'll work!
Exactly it will be a lot steadier and safer !
Heidi you are so wonderful I love all your videos keep up what you are doing girl
Love seeing you do it all with a smile! What's not to love a pretty country woman packing pistol's getting ready for the hunt !
Heidi If you put some 45 degree braces on the openings that you drive under up high so they are out of the way going under it will stiffen the whole stand up and keep it from racking and twisting causing it to fail. Also go ahead and put supports under each step. You may also want to put some all thread rod under the steps from side to side in a few places to help it from pulling apart.
Glad to see you back, and moving forward on your stand. Those rungs look pretty dicey since they are now tight against stingers/rails, they are suspended in the air with screw ends. Be careful, even put a support under those so they can not push down while climbing, do not forget to secure your blind also. Keep videos coming , thanks.
I am glad to see you upgraded from 6- shooter, to semi-auto pistol, good to see you are keeping up with the times.
Thanks for the laugh as you were getting the ladder up. I could almost see your brain working. As I was talking to the TV to you on how to do it. Lol😁😘
Make all of your bracing large right triangles.......use 3" screws and leave areas for bolts with fender washers and elastic stop nuts. use stainless steel hardware.....
I hunted a stand once in Alabama that they used ratchet straps to secure it to the ground and it drove me crazy. The stand was set up along a huge field that always seemed to have high winds and the ratchet straps would flutter in the wind and the vibration would resonate throughout the stand and you couldn’t hear yourself think. On a good note the sounds didn’t bother the deer, they would walk right by the stand and not give it a second look. A steel cable and a turn buckle may not be affected by the wind as much. Just a thought, good luck.
Was just about to comment the same. Aircraft cable, earth anchors and turnbuckles. Reinforce the ladder, blocks under the rungs, move it to the side so it doesnt block the trail and add a handrail at the very top for the transition.
Lol spin the straps
Good ideas Men, hell, we'll get this thing built yet. I-I-I-I mean, she will.
Stella building a tree stand you can always use a pre-existing tree and just build a ladder on that and then custom Limbs and other platform
I thought I was the only one that had issues with BIGFOOT!!!! I'm glad you are getting your hide ready for the season. I hope you get a big one this year.
That's the nickname for her boyfriend😂
@@rowdybroomstick1216 vibe
Issues with BF(Sabe)? Be careful. I was caught by surprise when Lil Red said Sabe was walking about.
@@thomassteffens1823 Dude I'm Married Happily Married
Hunting season in north east Ohio,is over, coyotes is about it, spring steelhead in grand River, smallmouth in the summer, treasure hunting,parks,Beach,always something to do on the weekends
Deer in the fall ,swat x1- an a 10 point, their local to me, Some real Big deer in North East Ohio 232# 10 pointer is my best yet
, archery season in 2023, can’t wait!~Best Regards
would not sweat the hammering/construction during bow season (actually had bucks come up while I was hammering/building on my shack)
Good luck this year I wish you a successful bow hunting season 👍
I to am a bowhunter season has been open up here back in September 15 getting out soon myself been waiting for colder weather and it's here and the deer are moving time to get in the stand 👍🦌
I bet everyone could watch you all day long !
You're such a busy bee, alway building, constructing or out on missions. Living the dream.
I encourage you to practice shooting from the same height and conditions. Standing or sitting. The trajectory of the arrow 🏹 flight ✈️ will change. Whatever you choose to secure the stand with, remember you will be climbing up in the dark.
Stay safe and happy hunting 😊
If you ever build another one, I'd sheet your deck first before standing your blind up, the little bit of extra weight would save you alot of extra work sheeting it in the air. Also, you should pre-fab as much as you possibly can on the ground(temporarily). then dis-assemble anything you've built and rebuild it once your stand has been erected, this way, you will know everything fits and will probably save you alot of trips up and down your ladder. ;) (Scratch this last idea, as I see you just used a pop-up tent) lol. Speaking of ladders, I'd buy a cheap 2nd hand (or new) aluminum extension ladder, would be much lighter and guaranteed not to rot from weather exposure, eventually weather will reek havoc on your ladder steps........I'd hate to see you fall and get hurt!! Happy hunting !! 🦌
C’mon Heidi safety goggles please. Got to protect those gorgeous eyes of yours. Enjoying watching you do this project. Looking forward seeing the finish product. Good luck.
Yes please wear appropriate PPE for your protection. Add respirator when using all spray chemicals including painting w primer especially if you enjoy your sense of smell... Keep up the great work! 🌹⚡️🇺🇸
If she was blind you still wouldn't have a chance lol
🐩 🐴 ❄️❄️
Ok "DAD"
You were game sliding that decking up, I agree with the others who told you to support the ladder rungs, not only your weight but with the decking weight too pushing against the rungs, I'm happy to see you made it to the top without mishap. Also please when cutting the board make sure the power cable is well out of the way of the saw, I nearly had a heart attack that power cable was so close to being cut. Take a look at the replay please. Apart from those things I give you credit for trying by yourself, great work, keep safe.
Proud of your accomplishments, the tenacity to tackle that box blind and get it done! You go Heidi!! You do you! Keep rockin' the farm life!
you are just amazing . Thank you very, very much Heidi
Good job!! Hopefully all them work pays off !! Get a big one this season!!
OMG Heidi, you are just perfect. Your boy friend is so blessed!
Beautiful woman with lots of talent! Be careful, don't want to see you get hurt. ♥️♥️♥️
Use to watch "Growing Deer tv" channel. They planted crops for feed lots, then pulled a few plants from different parts of the plots to have them tested for vitamins and minerals, especially calcium for the racks. If something was missing, they would add it to the soil to give the deer the best diet, and the biggest racks. They have it down to a science and well worth watching.
Your scaring me ,don't get hurt before the season starts!!😂❤
I love how you do most of your projects alone,major props
Attach the ladder right to the side of your tower stand, it'll give it more strength
You my dear sure can make a guy chuckle! So fun to watch. That ladder is more crooked than a politician! And an osha violation! But I applaud your ambition and hard work you do. Gosh I wish I was there to help. But I know satisfaction comes with doing it all by yourself. Research so you don’t get hurt! Cause I don’t want to cry!!! Shoulda heard me yell stop! When you attempted to climb that ladder!!!!!!
the locations are so amazing which always remains a highlight of your videos.
Such lonely , quiet and serere places and that mystical music that nature creates is so joyous in itself. as an Indian its hard for me to find such places with so many trees and greenery, with leaves rattling all over. I can only picture myself being in those locations watching your videos.
Good job Girl.
Respect from India
Add a ratchet strap halfway up the ladder and to one of the stand's legs...that'll take a lot of the flex in the ladder out and firm it up some for you. Enjoy watching your problem solving and solutions, and since it seems to fit you as well, I'll share my credo...Aut Viam Invenium, Aut Faciam. I'll find a way, or I'll make one. Stay safe!
There's no shortage of recommendations that you need to reinforce the ladder as it is sketchy AF, but on a side note to better steady your shots with your crossbow I would recommend a pr of shooting sticks like the Primo's Trigger stick. I bought 1 for my son and it's a great shooting aid to steady your shots for better shot placement.
I don't have crossbow experience but I thought her stance looked odd. Standing straight up and straight ahead. Is that the proper way to shoot a crossbow? I would expect one to stand kind of diagonal more like shooting a "regular" bow or a gun...
Omg Heidi! Great job on the stand but... the ladder scares the living crap out of me! When u were pushing up the plywood for the floor I was praying the steps held! I saw gaps between the step and upright cause they weren't sinched together tightly! Two screws on each side should be sufficient, make em tight though girl! And it should be good for this year but next summer instead of having them between put them on the face and then cut an angle on the top to sit better against the stand! U should be plenty safe that way! Love everything about u and all u do would hate to see u get hurt! Cant wait to see the monster buck your gonna shoot this year!😘
Heidi you need to brace each and every run On that ladder so you don’t fall through it and get yourself hurt and you need to do it ASAP
Always bring somebody with you when you are out hunting.
Good idea on reinforcing the steps ASAP...
Yes! I thought the exact same thing. Just cut a 2x4 to fit from rung to rung up both sides!
Lots of initiative as I know how much effort goes into building a platform blind, not easy especially when you’re doing it by yourself. Great job Red
You are the best and prettiest country girl on all of social media.
Congrats on your progress on the deer stand.
On those rungs where the rail does not go all the way to the edge of the rung you need to get a clamp or strap to bring the run and rail together and finish driving the screws all the in or else the ladder will fail sooner than need be. To strengthen the ladder further and help support the rungs it would also be a good Idea to cut some 1" by 4" blocks and attach them butted directly under each side of all the rungs. If one fails while you are close to the top when climbing it could cause you to fall and be badly injured. Don't want that.
Heidi, you may want to x brace the front and back like you did the sides, it will be much more stable! Stay Safe and good luck hunting!!
Ah you build a housie in the sky. Very impressive indeed man. Thank you for sharing. Just wondering if you going to take your puppy up there as well? Take care and God Bless. 💖
Been waiting for this video, love to see you accomplish so much by you self..
I made a target out of a 50# feed bag, stuffed it with old T-shirts from Good Will, and none of my arrows shot with a 60 pound compound bow went through. Also I can pull them out with 2 fingers. Don't use Jean's or any heavy material, or they will be much harder to pull out. Pretty sure your cross bow can't shoot through them either. Much cheaper than a store bought target and easier to use.
Gotta love that sweet kitten and Elo!! Wow, heck of a job gettin' that ladder up! THIS is gonna be an epic season!!
Hoping you found a nice buck up that way during bow season? Hope all is well, look to hearing from you soon!!
Most beautiful country woman I’ve ever seen and handy. Melting my heart over here! Good work on the ladder also
Wow you ma’am are gorgeously beautiful, really like how you can see something in your mind and then make it happen. I can’t say for anyone else but with that 2nd attempt with the ladder I was saying along what you ended up doing. Just a great job keep it up.
Add supports under your steps on the ladder, it will make it more secure! Good luck hunting this season, can't wait to see your next video.
you 100% need a SAFTY HARNESS for that height.... i could not even imagine being in a blind at that height with no type of safety device!!!!!!!!!!!!!!!!!! please think about it. good luck nice job lets make it safe too...the ladder needs reinforced also.. you have done a heck of a job...now stay safe...you are very talented but this build is impressive but needs many improvements to be safe.
Everybody loves a goober, especially a beautiful goober.
Hey Heidi, a bit of advice for what it’s worth, my wife and i bow hunted for years and the best practice you can ever do is buy a 3-D deer target and practice a lot out of your stand, it will make you an excellent shot in know time, shooting from a hight is a lot different than shooting standing on level ground. And please be very careful on that ladder and stand, i don’t think my heart could take seeing you fall off of it and getting hurt. Good luck with your hinting, hope you get a biggin’
Great job building the ladder for your blind Heidi
This woman continues to be entertaining. When she says something should be
simple to do, like filling the tank with water, you just KNOW something's gonna
happen next. Never fails. It's all good though. We're all human and stuff happens.
She is very beautiful but also very independent and also has a very supportive family around her, much love and respect to you babe all the way from the UK England ❤️
please add some more cross members across the open sides that will help stiffen it up Great Job
So pretty, smart country girl. I wish I was 20 years younger! I love that you and your mom hang together. Mom and daughter for Life.