Atomrc Swordfish - Improved Flights With New Battery And Optimal Center Of Gravity
HTML-код
- Опубликовано: 18 окт 2024
- Atomrc Swordfish - Improved Flights With New Battery And Optimal Center Of Gravity
ATOMRC Swordfish FPV RC Plane Fixed Wing Flying Aircraft Build for FPV, Intelligence flight. -Flight controller have two firmware INAV or Arduplane, both firmware already pre-turned for the plane. RTH and RTH FPV version are plug and play, use just plug theire receiver and battery, plane is ready to go just like racing drones, no need glue or installed the electronics.
Arduplane version is also available, we can upload arduplane parameter setting on our web, you just need flash the arduplane firmware, load the settings.
SF1200NAVIAP20221205
Specifications:
Wingspan:1200mm
Length:810mm
Material: EPP
WingArea:15.35 dm²
Package size:815*220*185mm
Recommend motor: 2004~2306
Recommend prop: 7045
Recommend battery: 4s 5000mAh/21700 1P4s
Servo: 4Pcs 9g servo
Item weight: 1.4kg
Package size: 84*25.2*22.5 cm
Easy for beginners, pre turned and pre-installed electronics.
AtomRC recommending the ZoHD 4S 5000 pack is just utter nonsense. Not only does it compromise CG, the current draw on launch greatly exceeds the 10A max draw spec of the battery. That said, the plane is an utter joy to fly! Thanks for the video!
Yes you’re absolutely right. Thanks for watching 👍🏻
Thanks for the video. Right now I’m in the throes of setting up my INAV for my maiden flight. Was considering switching over all my Spektrum batteries, they are all Lipo. How many minutes roughly of flying time were you able to get out of a 3000? Enough for a long range flight?
Excellent have fun. If you have any questions let me know. I would say about 30 mins possibly longer if you are steady on the throttle.
How many centimeters from the Leading Edge is the center of gravity with your setup?
Mornin‘
Do you have any Tipps for programming an rc jet?
I just bought an hawker hunter and it is my first Edf jet.
What do you mean by programming it? Thanks
@@tdogrc I mean if you have some Tipps for mixes and servo settings
@@German_Rc_noob ah I see. I guess the main thing is EDFs usually fly pretty fast so I would definitely recommend setting low, mid and high rates (50%, 75%, 100%) on a 3 position switch. Also I would dial in about 30%to 40% expo. Hope the maiden goes well dude 👍🏻
how does your radio tell you what mode you are in?
With EdgeTX you can program voice prompts to sounds depending on the position of a switch. So it doesn’t actually know what mode I’m in, it’s just makes the prompt when I put the switch in a certain position. Any EdgeTX radio can do it using the Special Functions menu 👍🏻