Awesome video, thanks! Just as a quick tip to everyone out there, make sure not to de-dust your fan blades right above or near the logic/mother board. A lot of the particulates, though tiny, get all over it, and for some reason they're waaay stickier than regular dust. I learned this from experience. Nothing bad's happened, but why risk it? I like the thin-bristle brush in the video, and although it probably took away most of the dust, if you look at it under a microscope you'll probably find there's tons of itty bitty junk on it still. Optimally, dust in a well-ventilated area, not anywhere you usually breathe or touch things. Like outside, or in a garage where it doesn't matter where this dust goes.
God, that's such a tedious process just to clean and repaste the processor. Thanks for the guide. Does anyone have the normal idle temp for this Acer? Mine is around 88c and it's uber slow.
Nope. The thermal pad is thicker than paste. If you apply paste, it will not reach the heatsink, so the CPU will overheat. If you try to apply a thick layer of thermal paste, the CPU will still overheat, because paste only work well in thin layers. The only solution is a good thermal pad of at last 1mm thickness. I know because I'm in this situation now and the only thing that worked was a thick thermal pad.
I got the same laptop and its not easy as it looks here. That gadget looks like a razor blade. I tried on mine with a thin nail file and it looks like its held down with cellophane paper, so he/she was cutting that paper. Yes it does have a cmos battery, like all pc's.
А что тогда с перегревом делать? Температура 87 градусов, частота 1 ггц держится, хотя вроде как должна до 1,33 прыгать, видимо из-за перегрева и не прыгает. Думал разобрать, почистить, поменять термопасту поможет, но ужаснулся с того, что его целиком надо разбирать, чтобы добраться до кулера...
![Quando Rondo - Life Goes On [Official Music Video]](http://i.ytimg.com/vi/eIf3fhMXAow/mqdefault.jpg)
***ENG: Links to screwdrivers and parts in the description under the video*
***RUS: Ссылки на отвертки и заменяемые детали в описании под видео*
Awesome video, thanks!
Just as a quick tip to everyone out there, make sure not to de-dust your fan blades right above or near the logic/mother board. A lot of the particulates, though tiny, get all over it, and for some reason they're waaay stickier than regular dust. I learned this from experience. Nothing bad's happened, but why risk it? I like the thin-bristle brush in the video, and although it probably took away most of the dust, if you look at it under a microscope you'll probably find there's tons of itty bitty junk on it still. Optimally, dust in a well-ventilated area, not anywhere you usually breathe or touch things. Like outside, or in a garage where it doesn't matter where this dust goes.
thanks from JPN👍
God, that's such a tedious process just to clean and repaste the processor. Thanks for the guide.
Does anyone have the normal idle temp for this Acer? Mine is around 88c and it's uber slow.
The correct is to use a good and thick thermal pad. Removing the pad and applying paste will cause the CPU to overheat like in your case.
that is thermal pad, is it okay to remove it and apply thermal paste?
Nope. The thermal pad is thicker than paste. If you apply paste, it will not reach the heatsink, so the CPU will overheat. If you try to apply a thick layer of thermal paste, the CPU will still overheat, because paste only work well in thin layers.
The only solution is a good thermal pad of at last 1mm thickness. I know because I'm in this situation now and the only thing that worked was a thick thermal pad.
Nice this is good!
you're welcome
Thanks Very Much!
Demontaż wykonany lepiej niż pokazany przez innych, chociaż trochę wiedzy brakuje. Składanie bez wymiany pasty termo przewodzącej? To błąd!
Tu błąd jest już producenta. Dał termopad zamiast pasty i temu się tak grzeje.
Thanks Very Much :)))))
what fans can i use instead in aspire one 722 laptop because this laptop fan is not available
do these have a cmos battery, if so where is it located.....thanks... ..........
How do I fix a left hand hinge on my Acer aspire one 722 laptop please can someone help me.
Hi! You can buy new one here - goo.gl/zMccJ3
I got the same laptop and its not easy as it looks here. That gadget looks like a razor blade. I tried on mine with a thin nail file and it looks like its held down with cellophane paper, so he/she was cutting that paper. Yes it does have a cmos battery, like all pc's.
And now, how to assemble it back :)
In this video: ruclips.net/video/cex00T9qP-U/видео.html
The CPU is soldered on? :(
uh yeah, its a laptop. pretty much ll laptops use a BGA(ball grid array) mount
А термопасту что не надо поменять?
Да крепкий орешек!!!
Там термопрокладка. "Чистка" ровно для понтов. Полезность имее само видео по разборке, для новичков. Не более.
Не вижу смысла его разбирать, поскольку там стоит терморезина проще продуть.
вы имеете ввиду термопрокладка и на процессоре и на видеокарте?
ну да там нет термопасты
А вы случайно не знаете какой она толщины и теплопроводности?
А что тогда с перегревом делать?
Температура 87 градусов, частота 1 ггц держится, хотя вроде как должна до 1,33 прыгать, видимо из-за перегрева и не прыгает.
Думал разобрать, почистить, поменять термопасту поможет, но ужаснулся с того, что его целиком надо разбирать, чтобы добраться до кулера...