Thank you for this demonstration. I was able to quickly and easily raise the action on my new SG Special and it sounds so nice. A few straight-forward minutes of instruction that helped tremendously.
Mine sustains so beautifully I would enter in the Olympic Sustaining Event (if there was one) .. BUT the intonation was impossible without upgrading the bridge to a Nashville Type for more adjustment. A better nut, tuners upgrade and some nice pots later and now it is quite wonderful. The pickups aren't actually too bad so they can stay.
Mine came with 500 k pots. I have the Epiphone SG G400 Pro. I like the pickups too. The only thing I didnt like was the Epiphone Deluxe tuners. Swapped 'em out for vintage Grovers for $35.
This one is loud unplugged, good sign. I wish I could get into SG's. I like classic shapes too (have a Tele, Strat, Les Paul) but I think if I was buying today it would be Gibby or Heritage semi hollow.
It looks like you enjoyed playing the SG. Probably the best benefit of working on people’s guitars is that you get to play them. That was a nice and easy setup. Just adjust to get the action a little lower and done :D
Hi! Have you experienced sound detunning when playing this model, when you just put a little preassure on the neck? Mine's neck is extremely sensitive, it will bend and detune the sound..,I dont know if all SGs are like this or if my neck is broken :/ Thanks!!!
Tune-o-Matics are frustrating to me as only the E and e string height can be easily adjusted -- A, D, G and B just "go along for the ride" and you hope they're close enough. Any thoughts about filing individual (A, D, G or B) saddle slot(s) if needed - ? What if an individual saddle has to be raised - ?
I got one of these, bought from the internet not B&M store. Had to turn both sides down 2 entire turns. It was up so high I could barely play stuff around the 17th fret.
I am a total noob, but when I tried to practice on the exact same guitar SG G400 , the strings seem to be so damn high from the neck all I was hearing was buzzing and messed up sound, even though my guitar was tuned by me with a digital tuner. The 0 notes sounded perfectly fine, but when I pressed down on the strings, the few ones from the head towards the middle of neck were not bad, but not perfect, but the rest from 12th to the lower ones were impossible to play, the strings seem to be extremely high and being pushed upwards by that metal bit I can adjust with screws. Now to ask a question. Does adjusting the action to be lower will make learning and practicing easier ? Will the finger action fret thing be more forgiving and easier to do ? Thank you if you read my comment and replied :)
Thanks for the tips! I got an SG recently and it was a bit uncomfortable pushing down on the strings, so I was trying to figure out how to lower the action so the strings would be closer. BTW, I love how you're an AC/DC fan:)
I love these faded vintage type SG400....nice feel. I think the new ones come with upgraded Alnico Classic in neck and Classic Plus in brige... pickups.
I have a Gibson sg and it doesn’t have the flat head screw slot in the bridge pole!! I guess just hand turning the little wheelie things works the same huh?
Hello I was hoping you could help me. I have an Epiphone Les Paul and I have one major problem... The truss rod has stripped, however I can get a it to turn with a screw driver. I really need to get the damaged nut out of there and replaced, I can't find any information whatsoever. I managed to loosen the truss rod a lot but for some reason it appeared to tighten again. What I really need to know is do these truss rod nuts actually come off? If I turns out they don't come off and I have to remove the fingerboard to replace the rod, I had one or two worries about that and that is the size of truss rod I would need to replace it with. The other thing is if I use a steam iron to remove it will that not melt the binding? The reason I'm asking you is because I know you have much experience with these kind of jobs. Any help at all with this will be greatly appreciated. Regards DemonX
sir what is the string guage of E-6 A-5 D-4 g-3 b-2 e-1 the b string was totaly cut. i have epiphone G-400 SG. iwant to replace them all of my string but im confuse to what i used string and what is exactly the guage.
funkyou thats such a BS statement. Epiphone is great for a low income players, made almost exactly like Gibsons, for a fraction of the price. Anyone can mod and adjust as needed. you dint need to pay extra for a brand. The music comes from you, not the guitar. The best thign you can do to help your tone is to evolve a good technique and get a good amp. As for Epiphone SGs, they are excellent. Usually require a set up agter purchase, but after that they are real workhorses.
a lot of epiphone are setup and have perfect intonation right out of the box and some of the models being set up here in the US so maybe not the store that did the setup however I'm not a luthier like you
Its SG400 Epiphone Faded Cherry. Looks exactly same as mine i just got from a Pawn Shop in Aus $350 looks like new condition with nice black velvet case, lead and strap. But mine has inlay on the neck of pearl along each side the one in video has not that’s the only difference.
I've got an Epiphone SG and am out of range lowering the action. The low E is right at 6/64 but the high E is 7/64 which of course is way to high. Any suggestions?
Is the high E too high at the nut? It's easy to run an old string through the nut slot to cut it down so the action on that string improves, you just make sure not to overdo it or you will have fret buzz, but thing is the stock nut is a cheap plastic that works but would be better upgraded anyway so why not mod it yourself first, if it works fine if not an upgrade nut won't break the bank approx 15 bucks.
I just bought a new guitar and it plays pretty well except for the high e string. Strangely it buzzes (chokes actually) only when I press down the 2nd and 4th fret. It plays well on every other fret. Any idea what that could be?
I notice The bridge is backwards as opposed to a Gibson sg. Gibson the adjusters on the bridge face the tail, epiphone they face the pickup. Any reason for that?
I think hes saying that it was turned around at the store to get better intonation. when i saw this, it clicked in my head. i didn't know i could do that. i just got a jazzmaster and had to turn my bridge around on it and get perfect intonation. ill try it on my sg next when i change strings
I had a epiphone SG with the three humbuckers, someone broke the wood around the input jack and I got it for next to nothing. Loved the sound it made and kick myself for selling it!
@@WoodesosGuitarMods hey sir...i have an SG G400 , bought it yesterday, im a total beginner and it seemed to be very hard to play on the neck. I tried to follow your video, but to no avail, I failed horribly bad as my guitar now sounds awful when I press the strings down on the frets, there is buzzing sound, and even the amp makes a weird noise when i slightly touch the strings. I think I broke my guitar I knew i shouldnt have messed with this, all i wanted was lower action , but I wont touch it any further, I hope I will find someone online who can properly set it up for me.
I've got an epiphone sg 400 pro the 1966 edition I've tried to set it up done everything by the book but the notes on the A and the E string after the 12th fret are dead and only sound with high action which is not what I want what can I try to correct this issue thanks
I think we may have talked on another channel, but I just changed my strings to a lower gauge, 9's instead of 10's and I got buzzing on the low E and A string from about the 7th fret and lower. Going back to tens fixed it. BTW, I have the exact same guitar as you.
Anyone know what the string height at the 12 fret is in millimetres as I haven't got the right tools for the job been trying to do my SG vibrola by ear 👂 haha
I hav a newer 400pro sg , is there a replacement bridge u might reccomend , nothing wrong the stock 1 really , i could b OCD , im always changing things on every thing lol . Useful vid . Thx
Appreciate this! CAN YOU HELP ME?!! I have the same guitar that my brother in law gave me. It sat around collecting dust for I dont know how long. I cannot for the life of me get this thing fixed in regards to intonation. HELP!!
Tune your guitar up. Whatever note the open string is, it should be in tune to the same note on the 12th fret. If its sharp at the 12th, screw the screw at the saddle, (where the string goes on top of the bridge) clockwise until it's in tune. If flat, clockwise.
The push pull pots are actually awesome for shaping your tone, not bs
SG's are so underrated. Slab of Mahogany, two pickups, let's go. Rock and roll.
Thank you for this demonstration. I was able to quickly and easily raise the action on my new SG Special and it sounds so nice. A few straight-forward minutes of instruction that helped tremendously.
I use push pull all the time never broke with mine and I'm pretty aggressive with it good setup though bro
Mine sustains so beautifully I would enter in the Olympic Sustaining Event (if there was one) .. BUT the intonation was impossible without upgrading the bridge to a Nashville Type for more adjustment. A better nut, tuners upgrade and some nice pots later and now it is quite wonderful. The pickups aren't actually too bad so they can stay.
Mine came with 500 k pots. I have the Epiphone SG G400 Pro. I like the pickups too. The only thing I didnt like was the Epiphone Deluxe tuners. Swapped 'em out for vintage Grovers for $35.
It's the g400 worn cherry. Some of the best $200 I've ever spent.
This one is loud unplugged, good sign. I wish I could get into SG's. I like classic shapes too (have a Tele, Strat, Les Paul) but I think if I was buying today it would be Gibby or Heritage semi hollow.
I know I'm 2 years late but check out the Epiphone ES 335's for a nice affordable hollowbody.
It looks like you enjoyed playing the SG. Probably the best benefit of working on people’s guitars is that you get to play them. That was a nice and easy setup. Just adjust to get the action a little lower and done :D
Hi! Have you experienced sound detunning when playing this model, when you just put a little preassure on the neck? Mine's neck is extremely sensitive, it will bend and detune the sound..,I dont know if all SGs are like this or if my neck is broken :/
Thanks!!!
I have. However it only happened as I played while laying on my bed, it would sound a slight whammy bar.
It has gone away though..
It rings when unplugged !!! Nice !
Gonna be a rockin roll singer! Nice video
looked nice and light too. had a nice ring unplugged at the end. :)
Ya wanna see the SG I just had come through. Its under about 4 years of dust. Will upload some vids soon
Tune-o-Matics are frustrating to me as only the E and e string height can be easily adjusted -- A, D, G and B just "go along for the ride" and you hope they're close enough. Any thoughts about filing individual (A, D, G or B) saddle slot(s) if needed - ? What if an individual saddle has to be raised - ?
The SG pro has the Epiphone Elnico Classic Pro Humbucker in nickel, a quality copy of the Gibson 57" Humbucker.
I got one of these, bought from the internet not B&M store. Had to turn both sides down 2 entire turns. It was up so high I could barely play stuff around the 17th fret.
I am a total noob, but when I tried to practice on the exact same guitar SG G400 , the strings seem to be so damn high from the neck all I was hearing was buzzing and messed up sound, even though my guitar was tuned by me with a digital tuner. The 0 notes sounded perfectly fine, but when I pressed down on the strings, the few ones from the head towards the middle of neck were not bad, but not perfect, but the rest from 12th to the lower ones were impossible to play, the strings seem to be extremely high and being pushed upwards by that metal bit I can adjust with screws.
Now to ask a question. Does adjusting the action to be lower will make learning and practicing easier ? Will the finger action fret thing be more forgiving and easier to do ?
Thank you if you read my comment and replied :)
Thanks for the tips! I got an SG recently and it was a bit uncomfortable pushing down on the strings, so I was trying to figure out how to lower the action so the strings would be closer. BTW, I love how you're an AC/DC fan:)
You are REALLY great guitar player! What did you do on the first part (vibrato)
they update the shape of the epiphone headstock? i like it better.
I love these faded vintage type SG400....nice feel. I think the new ones come with upgraded Alnico Classic in neck and Classic Plus in brige... pickups.
I have a Gibson sg and it doesn’t have the flat head screw slot in the bridge pole!! I guess just hand turning the little wheelie things works the same huh?
Everyone needs a black sg. Most evil looking guitar ever.
adam nelson then why don't we change the association to Derek Trucks? He is the most incredible SG player ever!
mikeashimself701 the warlock are sinister as fuckb
Ummm, Tony Iommi?
Frank Marino O_o
@adam nelson
Hey Adam, when YOU grow up can you please learn about grammar, spelling and punctuation? Theres a good kid.
I have this exact guitar, and have problems specifically with g string staying in tune. Cant figure out what's going on. Any advice out there?
bak 138 same man
The nut might need adjustment.
Buy a new nut. Mine used to go out of tune every single time I touched it for 5 minutes. New nut and new strings solved all my issues with it.
Tuner
That's how all SGs and Les Pauls are. Just tune a bit sharp or flat
what did you charge that guy for the screwdriver work?
Where did you get the tool you used to measure the action? Seems easier than combining feeler gauges to get string height.
Perfect. Thanks!
Hello I was hoping you could help me. I have an Epiphone Les Paul and I have one major problem... The truss rod has stripped, however I can get a it to turn with a screw driver. I really need to get the damaged nut out of there and replaced, I can't find any information whatsoever. I managed to loosen the truss rod a lot but for some reason it appeared to tighten again. What I really need to know is do these truss rod nuts actually come off? If I turns out they don't come off and I have to remove the fingerboard to replace the rod, I had one or two worries about that and that is the size of truss rod I would need to replace it with. The other thing is if I use a steam iron to remove it will that not melt the binding? The reason I'm asking you is because I know you have much experience with these kind of jobs. Any help at all with this will be greatly appreciated. Regards DemonX
Just ordered one of these.. Expect it to arrive tomorrow...Thanks for this..
How much were these new ?
sir what is the string guage of
E-6
A-5
D-4
g-3
b-2
e-1
the b string was totaly cut. i have epiphone G-400 SG.
iwant to replace them all of my string but im confuse to what i used string and what is exactly the guage.
Tryed to setup but when I play Barr chords up the neck it's out of tune when play d or g up the neck in the first 3 frets it's in tune is neck damaged
Gunna be a rock and roll singer!
I'm looking at my next used guitar purchase (Left handed of course!!!!)
quiksilver78 Yup!
funkyou thats such a BS statement. Epiphone is great for a low income players, made almost exactly like Gibsons, for a fraction of the price. Anyone can mod and adjust as needed. you dint need to pay extra for a brand. The music comes from you, not the guitar. The best thign you can do to help your tone is to evolve a good technique and get a good amp. As for Epiphone SGs, they are excellent. Usually require a set up agter purchase, but after that they are real workhorses.
a lot of epiphone are setup and have perfect intonation right out of the box and some of the models being set up here in the US so maybe not the store that did the setup however I'm not a luthier like you
Nice Job, I believe it's a regular SG.
This helped me with my Explorer. Thanks.
You haven't been posting lately. Please post more!
Nice SG, just needed a little T.L.C. Good video
Love ya man,you rock!
Love ya back!
I have terrible fret buzz due to ridiculously low action on my SG, do i spin the bridge screw clockwise or counter clockwise to raise the action?
counter clockwise and detune/loosen the string tension first
My cheap 90s epiphone sg is currently set up like a lap steel guitar. I can measure the action in inches.
Its SG400 Epiphone Faded Cherry. Looks exactly same as mine i just got from a Pawn Shop in Aus $350 looks like new condition with nice black velvet case, lead and strap. But mine has inlay on the neck of pearl along each side the one in video has not that’s the only difference.
What height did you adjust it to?
I wish I could send my new guitar to you for a set up
I've got an Epiphone SG and am out of range lowering the action. The low E is right at 6/64 but the high E is 7/64 which of course is way to high. Any suggestions?
Is the high E too high at the nut?
It's easy to run an old string through the nut slot to cut it down so the action on that string improves, you just make sure not to overdo it or you will have fret buzz, but thing is the stock nut is a cheap plastic that works but would be better upgraded anyway so why not mod it yourself first, if it works fine if not an upgrade nut won't break the bank approx 15 bucks.
I just bought a new guitar and it plays pretty well except for the high e string. Strangely it buzzes (chokes actually) only when I press down the 2nd and 4th fret. It plays well on every other fret. Any idea what that could be?
codica666 that's probably a problem with the truss rod. Unless you have experience I'd recommend taking it into a store to get it fixed
Beautiful 😊
I just took my Epiphone EB3 to guitar center. Brought it home sfter getting new strings.
They loered action. Now I have rattle.
I notice The bridge is backwards as opposed to a Gibson sg. Gibson the adjusters on the bridge face the tail, epiphone they face the pickup. Any reason for that?
I think hes saying that it was turned around at the store to get better intonation.
when i saw this, it clicked in my head. i didn't know i could do that.
i just got a jazzmaster and had to turn my bridge around on it and get perfect intonation.
ill try it on my sg next when i change strings
I had a epiphone SG with the three humbuckers, someone broke the wood around the input jack and I got it for next to nothing. Loved the sound it made and kick myself for selling it!
That would be a custom then? or a mod?
Shouldn't the truss rod adj be checked before adjusting the action?
yes
What was the name of that song you teased us with on the outro? Also - the band name?
AC/DC - Rock N Roll Singer at the beginning and at the end it's Back in Black.
Thanks for the reply. 😊
Woodeso's Guitar Mods it's at the end of TNT though
@@WoodesosGuitarMods hey sir...i have an SG G400 , bought it yesterday, im a total beginner and it seemed to be very hard to play on the neck.
I tried to follow your video, but to no avail, I failed horribly bad as my guitar now sounds awful when I press the strings down on the frets, there is buzzing sound, and even the amp makes a weird noise when i slightly touch the strings.
I think I broke my guitar I knew i shouldnt have messed with this, all i wanted was lower action , but I wont touch it any further, I hope I will find someone online who can properly set it up for me.
how did you do the vibrato thing on the first riff?
wiggle all my fingers? It's unconscious..
I've got an epiphone sg 400 pro the 1966 edition I've tried to set it up done everything by the book but the notes on the A and the E string after the 12th fret are dead and only sound with high action which is not what I want what can I try to correct this issue thanks
I think we may have talked on another channel, but I just changed my strings to a lower gauge, 9's instead of 10's and I got buzzing on the low E and A string from about the 7th fret and lower. Going back to tens fixed it. BTW, I have the exact same guitar as you.
would that work for an epi 339 pro? still fighting with action and truss rod adj! cool guitar BTW!
Yes:-)
OK cool thanks!
Anyone know what the string height at the 12 fret is in millimetres as I haven't got the right tools for the job been trying to do my SG vibrola by ear 👂 haha
can i know string gauge @Woodeso's Guitar Mods
not the same pickups of the pro ones
I just bought an EPI SG pro and I get a sour note on the G string 4th fret , what causes that
bad intonation. i had the same issue on my V. check the intonation is right. otherwise maybe a high fret
I hav a newer 400pro sg , is there a replacement bridge u might reccomend , nothing wrong the stock 1 really , i could b OCD , im always changing things on every thing lol . Useful vid . Thx
I got the same exact guitar
Appreciate this! CAN YOU HELP ME?!! I have the same guitar that my brother in law gave me. It sat around collecting dust for I dont know how long. I cannot for the life of me get this thing fixed in regards to intonation.
HELP!!
Tune your guitar up.
Whatever note the open string is, it should be in tune to the same note on the 12th fret.
If its sharp at the 12th, screw the screw at the saddle, (where the string goes on top of the bridge) clockwise until it's in tune. If flat, clockwise.
@@12south31 sharp clockwise, flat clockwise ????
@@DLStarbuck Ha, oops. Hope he figured it out.
That's what Dave suggested. .012
I have the exact guitar
Lou Ferrigno luthier.
Inwood customs ya bess lol
I dont get this shit /:
Another internet expert?
Doesnt work
Time to hit the gym, my dude.
Your just saying numbers. No direction for those who dont know. Label your video accordingly. Your words arnt a beginner. I lost you at 1 minute. Js
❤❤amp settings.