Fixing Toyota Tundra RUST and painting frame
HTML-код
- Опубликовано: 5 июл 2024
- I chip all the rust off my Toyota Tundra frame and paint it using Chassis Saver paint turns out Awesome. 2007 Tundra
Thank you very much for watching and God bless
**Needle Gun or Scaler amzn.to/3az47h8
**Chassis saver paint 1 gallon amzn.to/3mPhnUM
**Chassis saver paint 1 quart. amzn.to/3DBNY76
** My T-shirts diy-jim.creator-spring.com
5% off shirts use DIYJim2021 when checking out
Bible ESV easy to read amzn.to/3qshNQP
Bible NKJV amzn.to/30ns322
Titan solar generator (large generator) poweredportablesolar.com/ref/48/
Go pro that i use amzn.to/2WC6WXH
my wireless mic Rode wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
0:00 Intro
1:30 Tools
2:18 Start cleaning frame
4:12 Remove bumper
6:20 Pressure wash
9:49 Tips on removing plastic clips
11:30 Finish removing rust wire wheel and Acetone
12:18 Broken bolt and fix airbags
13:52 Paint frame
19:00 Ending
*Disclaimer - Thank you for visiting my RUclips channel. Please understand that the content on the DIY jim RUclips channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my RUclips channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my RUclips channel.
#tundrarust #fixtundrarust #painttundraframe 
Хобби
(click read more) Thank you very much for watching and God bless
**Needle Gun or Scaler amzn.to/3az47h8
**Chassis saver paint 1 gallon amzn.to/3mPhnUM
**Chassis saver paint 1 quart. amzn.to/3DBNY76
** My T-shirts diy-jim.creator-spring.com
5% off shirts use DIYJim2021 when checking out
Bible ESV easy to read amzn.to/3qshNQP
Bible NKJV amzn.to/30ns322
Titan solar generator (large generator) poweredportablesolar.com/ref/48/
Go pro that i use amzn.to/2WC6WXH
my wireless mic Rode wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
0:00 Intro
1:30 Tools
2:18 Start cleaning frame
4:12 Remove bumper
6:20 Pressure wash
9:49 Tips on removing plastic clips
11:30 Finish removing rust wire wheel and Acetone
12:18 Broken bolt and fix airbags
13:52 Paint frame
19:00 Ending
best restoration hands down great job sir. got my subscription. Im definitely doing this to my 2007 Tundra.
Thanks for the sub!
My truck is a 1990 Ford but being in Florida there is no salt to ruin the frame. I have the exact same needle scaler I was using on the rust on my Bobcat. Putting phosphoric acid after mechanical rust removal is always a good move. Removable parts go in my electrolysis tank for effortless rust and paint removal. Few people realize what a time consuming job this is. If I ever restore my truck I am going to disassemble the whole truck and use electrolysis on the whole frame. Good detailed step by step video and you look cool even without your headlamp!
Thanks for watching, wish I was in Florida when winter gets here lol
Gonna try this on my '08. A great way to extend the life of a truck. Thanks for your informative videos Jim. Cheers!
You bet! Thanks for watching
Awesome video very informative thank you. Frame looks like it turned out really well with the before and after pictures.
Thanks
I can appreciate the hard work. Those newer wheels look great on your truck too. Good job!
Thanks it was a lot of work, but I want it to last. Thanks for watching
Nice work! Thanks for taking the time to make the video.
Welcome
Great job. Lot of work. Never heard of a needle gun. That's a handy tool. Headlamp coolness factor 10 out of 10. :)
Thanks and thanks for watching. It was a lot of work but i was very happy with how it turned out.
Great videos man helped me out big time 👍
Glad I could help Mike thanks for watching
That’s what I was thinking that a gallon would probably cover two or more trucks. If the paint is that thin maybe you could have gotten a pump up garden sprayer and sprayed it into areas that the brush didn’t cover. 👍👍 on this project. I need to take the bed off of my 02 Tacoma and repair some damage. What I’m using right now is motor oil. To keep the rust down. ATF works good too. Garden sprayer. 😀
Maybe I will have to try some oil or ATF so my truck will last a few more years. Thanks for watching
I did the same thing to my 08 tundra but I put a clear coat over all the spots that get direct sun light then sprayed the frame an under side with fluid film
How did it hold up or did you just do it? Thanks for watching Joshua
Did pretty good man
Thanks
All that work and you bought another Tundra anyway! great video
I know right, but I had my 07 for 16 years it was time for a new one for me. Someone got a nit 07 I traded it in.
@@DIYJIM : I am thinking about doing that to my Tundra. I have been good about the lanolin based spray but it has some rust under there! We salt our roads like a mf here.
Great vid, I'm in the process of doing this to my tacoma. Going to have to weld new safe T cap sections as well.
Hope your Tacoma turns out good, thanks for watching
Hey great work thank you for posting this up. A couple questions:
Do you think a couple guys could lift the bed off? How much do you figure it weighs?
What size compressor are you using for the needle gun? How did it work out with that size?
Not really sure how much it weighs maybe 4-6 guys could lift it. I borrowed my neighbors air compressor I think it had around 10 gallon tank.
Good video! Like to get this done to my Titan
Thanks, the job was not that hard to do just took time. Thanks for watching
The back of the frame looks really good for a 2007. I’d carefully inspect the top of the frame just behind the front wheels. It’s a common place for them to fail and it’s hard to see.
Thanks for the tip I will do that
I noticed your Pennsylvania license plate… I live in Erie pa. I used to own a 2006 Tacoma and I never undercoated it, it was totally rotted out after 13 years. Now a 2019 Tundra and I love the truck but I fluid film undercoat every fall, I’m not dealing with that again.
I just bought another 2022 tundra I was thinking the same thing. Undercoat
What works good is transmission oil sokes in an power wash off i use it on stuff cheap it you leave it on its a protector leaf springs on my boat 👍
Thanks for the tip
No more open recall on these trucks? I haven’t looked mine up yet it’s an 08 but the previous owner didn’t drive it in salt, so I blasted it with wool wax, that really kept the frame clear of rust I’d say 90% of what I sprayed, the second time just recently I dropped the spare and sprayed the crap out of the rear end with wool wax again, highly recommend looking into that product for these trucks especially
I was happy how my frame looked. I thought it would be worse. Thanks for watching
Nice work and good video. What vehicle are you going to replace the Tundra with when you sell it?
Another Tundra but I do not think I am going to buy the new 6 cylinder twin turbo.
Amazing. We have a 270k mile tundra that I am thinking of getting the frame touched up like this as well. Live in central Canada where everything rots away within 10 years
The salt is hard on them, thanks for watching
From one retired Veteran to another, thank you! '07 myself, on the fence between doing what you did, vs. a trade in. Maybe I missed it, but what was the purpose of cutting your airbag lines and splicing back in? Thx.
I went from two individual spots to fill to one spot. I recently traded my tundra in on a 2022 Tundra. Thanks for watching.
Ok thanks. One last question, any regrets doing all of this work? Looks like you got two more years out of your '07. Wish you would have done the trade in back then, or glad you held on? What eventually made you trade it in?
@@glencaron7471 I think it would have lasted at least 5 more years. My bed was rusted real bad. I was thinking about putting a flat bed on it. But it was 16 years old. I guess I was just ready for something new.
How is the paint holding? Not peeling off from rust?
I used por15 and it lasted only a year and starts peeling off.
I don’t think it is peeling but I can still see some rust in a few spots. I’m still happy with it. Thanks for watching
How is this holding up since you did this? Has rust come back?
Most of it looks to be holding up good. Maybe I should make a quick video of it. Thanks for watching
5th
Slacker
Basically it appears you are attacking the external rust issues, but how are you tackling the internal rusting in the box sections of the frame? If you stuck a quality Boroscope inside all the factory holes in the frame, you'd see that the rust issues are creating the frame "cancer" from the inside. Needless to say, the needle tool you're touting is not gong to get much if any of the internal rust removed and not sure even bead blasting would work. Your frame doesn't appear to be as bad as some Tundras I've seen from the rust belt states, but removing what rust you can and then painting or spraying a coating like Fluid Film or Waxoyl (a Cosmolene waxy product) would provide more protection but even these products need to be re applied each fall. POR 15 has not worked on my Subaru Soutback and I have yet to try Rust Bullet.
Bottom line, if you're not taking care of the internal rust issues, then I fear all your work on the exterior is going to be wasted effort and money.
Thanks for the info and thanks for watching
Shame on you Toyota, your vehicles are rusting badly all of them including LEXUS.
Thanks for watching