Beautiful bike! I've got a 1963 Yamaha that I'm currently working on (80cc 2 stroke rotary valve). I was originally going to rebuild the motor, but the more I think about it, the more I'm tempted to just go 4 stroke and have 12V. Before seeing your video, I was torn between a horizontal cylinder engine or going with the 200cc vertical. I'm going to pull the trigger on the vertical motor, since it looks like it's going to fit better and will give me an extra gear and more torque to work with.
Tiago F I fused the rings onto the piston twice on the original engine. Original motor was rebuilt twice before the Lifan replacement. I guess that is what happens when you are WOT at 70 mph for 30 mins.
A great video and a great bike were did you get the 200cc; engine nice sound and half down the pipe there is a marking on the pipe and it looks like. a hot spot and no it will rot there but a very nice bike
mine 1982 125s with upgraded 144cc head. ,,,wow.. didnt know could get that !!!! mine max 65mph 34 t /15 front... could go max 17 front.. but i thinks will kill low end power! i like it as is for town... carb slow jet had be changed to a #35...
I have commented before on your build. Inspired me to build my bike. Another question though, what size jets are you using? My bike is a pig to kick start at the moment. I have a 40 pilot jet and a 95 main in the carburettor.
sorry man, i have the same 125cc bike and i would like to push it a little bit.... to get 200cc did you installed a kit for the termic group?????pls answer me becouse i don't find anywhere else another modified cb125
Sweet build! Could you share what wheels/tire set up you have? I have a 74 and I'm trying to decide on tires. Also, did you find that exhaust preformed better than the stock?
Hey, lovely build! I’m currently underway with my cg125e and was wondering how easy it was to swap that Lifan 200 engine in? Did you have to fabricate new mounts? Anyways, lovely bike.
Louis Winchester I did not fabricate new mounts. The only thing that was needed to be modified was enlarging the hole where the rear lower engine bolt goes thru. It needed to be widened about 2mm.
CD33 lifan 200cc engine he used. I'm looking at doing the same to my 125. Or I will just get a 150cc bore kit and a derestricted cdi, cone filter, bigger jet and unrestrictive exhaust.
So u removed the stock engine And put a Chinese overhead valve Engine which is poor performing due to poor old design copied from Honda cg models Vs the stock that was over head cam Oh boy
You're SO WRONG! That OHV 200cc Lifan is a great little engine. The design is tried and true...not to mention the fact that it produces significantly more horsepower and torque than the stock 125cc OHC turd. I've done the exact same swap to my CB100 and it's a fantastic option for the single cylinder Hondas. The factory engines are DOGS and usually worn out. These late model Lifans are 12 volt, electronic ignition, electric start, and super reliable. I've put 4K trouble free miles on my so far. The main downside to the Chinese swaps are the electrics. If you upgrade the connectors, it's really not an issue. As they say..."Don't knock it till you try it!" I guarantee you'd be amazed at how well they run and how damn fast the baby CBs are with the 200 or 250 swap. 👍 Take care, be safe.
I bought this exact setup that was half done a while ago pretty cheap ... I've got a lot more motivation to finish it now! Yours turned out sick!
your build is so clean and simple..good job
Beautiful bike! I've got a 1963 Yamaha that I'm currently working on (80cc 2 stroke rotary valve). I was originally going to rebuild the motor, but the more I think about it, the more I'm tempted to just go 4 stroke and have 12V. Before seeing your video, I was torn between a horizontal cylinder engine or going with the 200cc vertical. I'm going to pull the trigger on the vertical motor, since it looks like it's going to fit better and will give me an extra gear and more torque to work with.
Nice job! Good looking bike. Small bikes are a blast.
Thanks for posting.
Ni cg mesin nya memang bandel, bawak balok besar pun dia sanggup.apalagi tanjakan matap ga ada batas..
From aceh darussalam.
So nice and simple, congrats for the bike dude.
i love the bike ! i have a 70's honda sl100 and i'm building a brat tracker out of it ! good work!
J'avais un cb Honda 125 s kité en 135 cc. Ça a nettement amélioré le couple. Quand je passais de la 1ère à la 2ème, la roue avant se levait.
Amazing build its beautiful
The appropriate thing to say after you stalled it would be:
That's another fine mess you've gotten us into this time Stanley!!!
Great build!! I would've stayed with the original Honda engine and maybe just tune it up.. but hey :) very nice.. simple.. clean.. love it!
Tiago F I fused the rings onto the piston twice on the original engine. Original motor was rebuilt twice before the Lifan replacement. I guess that is what happens when you are WOT at 70 mph for 30 mins.
HERMOSA...SE ELIMINA TODO PLÁSTICO DESECHABLE QUE TRAE POR SU INICIAL Y FEO DISEÑO...Y QUEDA FANTASTICA!!
шикарный аппарат !
Very cool would love to see it on the road
nice work, what make engine did you put in? what's its top speed?
A great video and a great bike were did you get the 200cc; engine nice sound and half down the pipe there is a marking on the pipe and it looks like. a hot spot and no it will rot there but a very nice bike
Back in the day 84
Someone has left a tampon on front wheel oh hang on....
Very cool bike good job!!
Beautiful bike
mine 1982 125s with upgraded 144cc head. ,,,wow.. didnt know could get that !!!! mine max 65mph 34 t /15 front... could go max 17 front.. but i thinks will kill low end power! i like it as is for town... carb slow jet had be changed to a #35...
that is friggin awesome man love it
What forks did you use? Sweet looking build as well!
Hermosa moto 👌🏻 así quiero modificar la que quiero comprar
old skool
Hi Nice build 😎, Question... Do the front foot peg hangers bolt to bottom of the engine like on the CD, CG and CM??
Yes. 4 bolts.
okay so it fits, now bore it out a tad? port and polish. makes me want to ride my CL125s so bad.
I appreciate your project...
Does that engine fit in the CB 100, too?
almost 100% sure it will fit, not many differences between cb100 and cg frames
Fucking beautiful man.
Beautiful.
What engine is that 200cc .will a honda xr400 fit in the cg125 frame
I need this answers also
I have commented before on your build. Inspired me to build my bike. Another question though, what size jets are you using? My bike is a pig to kick start at the moment. I have a 40 pilot jet and a 95 main in the carburettor.
perfect commuter
What kit was used? I have a 73 and am looking for something like this as well
sorry man, i have the same 125cc bike and i would like to push it a little bit.... to get 200cc did you installed a kit for the termic group?????pls answer me becouse i don't find anywhere else another modified cb125
you can get Chinese engines with the same exact fitting, just a bolt-on.
@@themuhammad1 you have any idea of a brand that produce that engine?
Perfect!!!! ❤👍
Did you have to cut the mounts to get the motor in ? Love this bike I have a cbf
nice build dude...! so clean.,, tire size sir ?
Nice build bro. May I know the tire size you used bro? Both front and back. Thanks! 😊
Awesome
so clean, where did you get that exhaust from?
How did you get on with back breaks
Sweet build! Could you share what wheels/tire set up you have? I have a 74 and I'm trying to decide on tires. Also, did you find that exhaust preformed better than the stock?
hi! nice build....what engine did you use for the swap???....greets!
.
Lifan 200cc engine.
U cannot fit a Chinese engine over a Japanese one. Sorry I totally disagree. U could rather tune up the original one
Massimo Camorani Its a Lifan 200cc engine. I built this bike so I know it fits. You disagree?
Hermosa saludos de Chile
she's a beaut!
Me gustan muchos estas moto 😎
muy bien y haora que ya destrozaste la 125 que bas a hacer .
Been thinking about getting one. Are replacement parts hard to find? Is this difficult to work on?
Hey, lovely build! I’m currently underway with my cg125e and was wondering how easy it was to swap that Lifan 200 engine in? Did you have to fabricate new mounts? Anyways, lovely bike.
Louis Winchester I did not fabricate new mounts. The only thing that was needed to be modified was enlarging the hole where the rear lower engine bolt goes thru. It needed to be widened about 2mm.
Hey there...can you both tell me how did your projects turned out in terms of speed, stability and braking etc.....
Awaiting yout response
Did you have to make a custom mount?
that. is. lovely.
Nice!!
Whats the size of the tires and rims? Thanks
What bars are those? Also, those grips are the 👌🏻
Ureal bike!! What fuel tank was used?
Honda cb125 fuel tank.
@@TStanley27 isn't this a jx tank? Cg's is longer
Mahima Bimsara It’s a 1974 cb125s tank.
Can u plz tell me how to change a sound like that?
Did you need to do any mods to get the motor to it?
Cool cool cool cool cool!!!
Can u tell me how u modified about the exhaust
Did you swap engine or change block and head ?
Its a lifan 200cc motor
It's missing the side plates....looks weird. I like it a lot though.
How did you get the pipe to fit?
good evening. How much tire size did you use?
I need a exaust like that
Cool
Did you have to upgrade the motor? What kind is it if I may ask?
Did you make that seat or did you buy it??
Is there a battery in there?
Where did you purchase that speedometer? I cant find a simple design with MPH.
Looks like dime city cycles
WOW! ❤️❤️❤️❤️❤️❤️❤️❤️
whats the 200cc engine out of?
cant tell if the engine makes that noise or if its his nostrils
It’s both...
Nice sooo nice
muito linda!
me bike dream yuga hai modify kar k diksha di jiye
This still sells as new by honda in mo country under the name of cg125 it dosent even have a starter motor an d its price is 1200 dollars
Deliver me one and I’ll pay you double for it.
what's the 200cc motor he swapped to?
Where can I get an engine like that to buy?
eBay.
how did the performance improve from the 125 ?
More torque and hp. Definitely noticeable all across the powerband.
great thanks for reply half way through my cg125 build and thinking of this engine for that little extra power
@@jvboy56 what engine is that exactly
I like the part where you stalled xD hahahahaha
VideosAreDrugs
I have no leg muscles...
VideosAreDrugs that is the beauty of project vehical
what tires are those?
How did you run your battery?
I used the Antigravity 4 cell. The bike has been converted to a 12v system.
Greating One heart
I want to make one like it
dosen't this engine have less power than the original ?
Arppa Viuhko More torque and 12v.
Front tyer size?????
WOW
Which motor is this exactly ? please
Lifan 200cc motor.
Well
Price kya h is ke
Schweet
Did you use a bore kit or a whole new motor? Thinking of doing this with my bike. Also a CB125
CD33 lifan 200cc engine he used. I'm looking at doing the same to my 125. Or I will just get a 150cc bore kit and a derestricted cdi, cone filter, bigger jet and unrestrictive exhaust.
I think that cylinder ic CG OHV type,not CB OHC ！
I think its a CG125 turned into 200cc, no a CB125... CBs are ohc, CGs are ohv.
Linda
i think the engine is honda cg not cb
sexy bike
Aku jgx mau buat
ไฟ หน้ากีนิ้วพี่
*fit
So u removed the stock engine
And put a Chinese overhead valve
Engine which is poor performing due to poor old design copied from Honda cg models
Vs the stock that was over head cam
Oh boy
You're SO WRONG!
That OHV 200cc Lifan is a great little engine. The design is tried and true...not to mention the fact that it produces significantly more horsepower and torque than the stock 125cc OHC turd.
I've done the exact same swap to my CB100 and it's a fantastic option for the single cylinder Hondas. The factory engines are DOGS and usually worn out.
These late model Lifans are 12 volt, electronic ignition, electric start, and super reliable. I've put 4K trouble free miles on my so far. The main downside to the Chinese swaps are the electrics. If you upgrade the connectors, it's really not an issue. As they say..."Don't knock it till you try it!" I guarantee you'd be amazed at how well they run and how damn fast the baby CBs are with the 200 or 250 swap. 👍 Take care, be safe.