I have been using Resolve & Fusion for past 2 year and still learned so much here. Not just this one video but everything that you do, helps me with small-small things that I miss on regular basis in fusion. Love your work! And thanks a ton for all the Masterclasses. Truly using using Fusion at it's fullest.
Thank you for the tutorial. I was trying to figure out how to make a multicolor rounded border and while searching the web and multiple YT videos I did not find the answer until I came across your amazing video that teaches a lot good stuff for content creators. This is the best border video that I have found on YT.
Superb. I can see my sons brain ticking away pondering the various possibilities and permutations of what can be done. You present the information clearly and cleanly that makes following along easy. I've watched others do Resolve tutorials and I find yourself easy to watch, listen to and understand. Many thanks 👍 👍
Straight to the point, ZERO childish talk like what I have to endure when learning from many other DaVinci Resolve younger RUclipsrs. Thank you Sir! Regards from North Africa to you in North America.
you're always going the extra mile in your videos, the intro was straight up blowing my mind already!! you deserve so many more subs, and i hope there'll be more effects tutorials you'll be sharing with us!
Your videos are all so entertaining and filled with great information. I always learn something from them even if they are not focused on a topic that I'm looking for at the time. I watch every one, and often many times. Thanks for sharing.. great work. 👍
This is reall what I needed today for my videoproject but did not mastered yet! My learning curve is very slow but your videos help me tremendously. I was able to use your slide panel seetting in my last project! Thank you!
Awesome... really glad to hear that you were able to use the slide panel. It always takes a while to learn new things. but each time you try something new.. it gets a bit easier.
thanks, this is incredibly useful! I finally understood how to make a border on my masked image on my very first video ever, and I will try everything else from your tutorial later on. Again thank you so much, I struggles for a good hour and you just helped me fix it in minutes.
William Justice could you please make a video on how to make electricity in different ways? Or like a fire effect? Thank you so much for your tutorials!
I wonder how it is that I didn't find your channel until today. Is RUclips recommendations broken or something? You explain things so well, it's easy to follow you. I learned A LOT of things I did not know. Like and Sub!
Thanks... for the matteControl.. it was just a convenient way to add the mask. Not sure if there is a better way but did not want to put the mask directly on the mediain. that would make it more difficult to reuse. Yeah... keyframe stretcher is not good but works (sometimes). Wish you could right click on a key frame and PIN it to the beginning/end of a clip.. color could change.. .ex. keyframe marker turns blue to indicate it is pinned to the end... Also... not sure if you saw my previous video on the 3D generator... (you usually comment)... but wanted to let you know that I mentioned you in the video for you help on setting up the circle motion path.....Thanks for the helpfeedback!
Flame border sounds like a great idea. You could change the colors and bump up the distortion and it might look pretty good. But other ways to do flames... probably lots of different ways to do it.
thanks so much i am going to do all my own animation for my youtube and my mixer stream dont worry i will for sure give u credit u are amazing for showing me what i can do on a free program
@@WilliamJusticeMedia that's great, man! Your videos are always fun and creative and playful. Your content definitely has a unique style and stands out. Keep it up!
Did you have trouble downloading? you just just need to click the link to go tot he download page, then click download (it is on google drive). That will get your browser to download the .settings file. You can then go to your browser downloads to find the file. Once you have the file you should be able to drag it into a fusion composition. Let me know if you are having issues and I will see if I can help you out.
Great video and unlike most "teachers", easy enough to follow. The problem arises - it's one thing to be able to follow you, its quite another to understand how everything works and to be able to do it on our own. How did you learn all this? Although be be honest, I could do this in After Effects in half the time and way easier. But Fusion is a giant challenge.
Saved this one watched it 100 percent and will probably watch it 3x more to try getting it working on my clip. I am assuming you can box an element in a clip changing the size and position
Hi.. You can frame anything using a similar technique... This one one auto sizes, but you could remove the auto sizing parts so you can adjust it to be whatever size you want.
Hi Kiya, Thanks for your comments. Yeah,, I hear you... Fusion is a bit difficult to follow at first. But once you try out a few tings and and see how it all goes together, it starts to make sense.
Hey William. I'm a big fan of yours. As a RUclips creator myself I have switched over to DaVinci Resolve a few weeks ago as my goto editor. I watch many DaVinci Resolve videos and YOURS are my ultimate favorite. Love the projects that you do. Very creative stuff, and you're not a bore to watch. Yeah, you should have many times more subs than you do. I searched on "Davinci Resolve" and I had to scroll down like forever before I finally found one of your videos (this one). That's not good. I think you need to do some additional SEO for your videos. I notice you don't use many tags. Add as many as allowed. Be sure to include your title in your description, like this one "This video is about adding dazzling border animations & effects", for example. I WANT YOU TO SUCCEED BECAUSE YOU MAKE DOPE VIDS! Keep sharing, including your gimmes on your website. Feel free to contact me directly if you have any questions. my channel name at gmail is my contact.
Hi...Thanks for your comments. I hope the switch to Davinci is going smoothly. There is a lot to learn, but the basics should be pretty easy to pickup. I am learning and always looking for tips and advice to help me out and improve my channel. I will definitely use your tips. Thanks so much for sharing!. Even the little things can sometimes make a huge difference. Just finishing my first year on RUclips...I have lots of new videos planned... just have to find the time to get them done! But having a ton of fun!
You are always awesome man ! can you post tutorials of davinci resolve about text for a explanation video with other language like Tamil etc... Please help Man
Are you referring to the video description text? or subtitles/CC translation where you see the text on top of the video as I am talking?when watching videos you should be able to click the gear icon and then subtitles.. Think there is an option to translate to another language. I have not done much with other languages. If you can let me know what you are looking for, I can investigate and see if I can set it up.
I thought about using an instance, but decided to create a separate node because most of the settings between the 2 rectangles would need to be de-instanced... ex.. level, border width, border position, length , possibility the soft edge as well. To me it seemed a bit easier to connect a couple of properties instead of de-instancing. Just a preference.. Really appreciate your feedback... Thanks for watching!
@@WilliamJusticeMedia Yeah I'm learning too. I'm still pretty clunky with my keyframes and can still get caught up node structures. I picked up a lot of nice little shortcuts from this one though, so thanks!
Great instructional. How would I do this WITHOUT the image (skyscraper pic)? For instance, just have the animated border surrounding transparency? Thanks
There are probably a lot of different ways to do that. You could try using my highlight zoom effect. It lets you put a border around something in a video. ruclips.net/video/8N-lrbvBvVw/видео.html
Hi, Bill thanks for sharing this. I'm still stuck on Resolve 16, but was able to do make a fusion composition to create the kinds of borders I need from what I learned in your video. I wanted to go to the next step and create a macro that I can drag and drop onto a clip to create a border. Is that possible in Davinci Resolve 16?
Thank you so much Mr. Justice for putting this tutorial together, and the many more you have published on your channel. I do have a few questions for you about these types of effects. I exported the settings for the basic animations using just the rectangles, nothing fancy, no rotation and such. The overall time for my video clip is 3 seconds, with the frames staring at 0 and ending at 71. Also, I followed your config to setup the transition at frame 9 and 10, moving 20 frames forward for the inner frame to take effect. The exported settings had a resolution (shot on a pixel 6 pro) of 1080 x 1920. Issue #1: If I import a video with the same resolution and apply the exported settings it works just fine, the problem I am having is if I import a video with resolutions of 1920 x 1080, then the settings does not work. I will have to edit the .settings files to match the resolutions. Furthermore, modifying the properties in the Inspector to resize it, creates a mess when I apply the settings in Fusion. Issue #2: The settings are based on the exported frame positions: 0 and ending on 71. If I import a video and trim out the beginning, thus extending beyond frame 71 (3 seconds) the effect wont work, it just shows the boarders without the border animation. I know you said to use the Keyframe extender, but how do you control that when the settings are set to position 0 and ending on 71? My apologies for the long explanation, but I have tried many different formats and different video resolutions/frame positions, seems to break the exported settings. Thank You! Regards, AC
Wow! This was super helpful and near perfect! Next I just need to figure out if there's a way to relocate my clip on the screen and have the mask move with it T-T But I am so thankful for finding this video, thank you ^-^ Suddenly wondering how you got 2 masks on the same screen with 2 different videos :o that's exactly what I need ahhh
@@WilliamJusticeMedia Thank you! I had some issues, but it turned out Davinci 15 was just buggy! I updated to 16 and I was able to get 2 videos with their own masks on the same timeline just fine. For some reason on 15, the 2nd video would "grab" all the videos underneath it when I tried to move it x-x
Did I miss something? I don't have all the "border style" in the inspector when I uncheck "solid" of the rectangle node. 😣 I guess something is wrong with my Davinci Resolve 16.1.2 EDIT: I updated to 16.2.2, and the "Borderl Style" is available in the inspector for the Rectangle node
@@WilliamJusticeMedia Yes 👌 But now I don't know if it was an personal issue with my install or if it's was something new in 16.2.2. *Anyway, I can follow your great tutorial now 😁*
Super cool vids William.... QQ? I'm trying to insert an animation of dots or dashes into a small clip of film footage. IE dots going around a door mat on the floor or a sign on the wall. Do you have any tutorials on this please! Thanks Chris
Thanks for your comments. I dont know how to do dots/dashes right now, but will investigate when i get a chance. If I find something interesting, I may make a video about it.
Nice tutorial! Im having trouble with reusing the frame. When I group it, copy and past it into a new work it dosent load the assets onto the video. The Fusion effects and group is there, just not being loaded for some reason
U r amazing.... How u teach is the real key....simple stuff in details... Sir one request, could please make a glass breaking effects tutorial? I mean, video gets broken in glass effect... Im AE there is already a preset (shatter) but not in DR
Broken Glass.. that sound interesting. Not sure if I can do anything with that but will add it to my list. If I get time and come up with anything good I will make a video about it.
great job William! I have the same problem as LEDgendaryDIY. On rectangle 1, the rectangle fit the image size when width and height are at 0.5 and not 1 another question: when we zoom the image , how can we mask the image when it goes out of the border?
Hi Bernard. Are you still having trouble with this. Sometimes the dimensions can get a bit off. if you can give me more details, I can try to see what might be causing your issue.
@@WilliamJusticeMedia Hi William, yes I still not have the solution. The goal is to have an image in backgroud and another image in foreground with a border. I can do that. But in some cases, i want to have to zoom the image in foreground but in a window keeping the same size. As an example, in your video, it's to zoom ONLY your face in the border without going out of the border Actually, when I do this, if the zoom is bigger than the border, the image goes out of the window. I try different solutions in fusion, without succes. ( sorry for my poor english, I hope you will understand) Bernard
@@bernardr.913 Hi Bernard. I'm not sure if this can help you. I was having some problems with the border and the portion of the image I was trying to use inside the border (something like a crop) and here is what I did. Sorry my English. ruclips.net/video/Erg9ochXFqQ/видео.html
@Bruno Vilela thanks for your suggestion, but it's not my question. What I want to make : zoom an image or video in or out in a fixed frame, like the demo ruclips.net/video/Tr-Q0lZ7YIo/видео.html
@@bernardr.913 So Bernard. I think that with just one (two or three) nodes in my fusion composition of my previous video you can achieve what you want. Check this new one to see if this can help you. Notice there is a "transform" node as my last node before the MediaOut1 node. That node is useless in this fusion composition unles you need to resize all the frame/image at some point inside fusion. So, indeed you don't need it there. I just let it there without any utility. for this short video purpose. :) ruclips.net/video/julcfesJpic/видео.html
Well, you are not a beginner anymore. Things are getting serious fast hahah. Thank you for this amazing lessons, the publish and connect to was revealing. A small question, why did you use Matte Control at the beginning of fusion nodes?
Thanks so much. With this setup, i needed to have a mask on the main image for rounded corners. The matteControl is not required. The mask could go directly into the mediaIn instead of the matte control.... BUT i want this to be easily reusable... When adding the effect it is just quicker to just connect the medain in to one place... Instead of having to connect the medaIN and then add the mask on it. There is probably a better way to do it but this seemed to work for me.
Your videos are great.. I need a rectangular border on a picture but a little different to what you taught .. I want the border to close in one direction only .. the rectangle you showed is closing in from both directions from the starting point .. Can you please help me with that
Not sure exactly the look you are going for but try going into fusion, add a background and put a rectangle mask on the background. Un check solid for the background and increase the border width. You can then adjust the lengh/position property and keyfframe that
@@WilliamJusticeMedia I tried but couldn't succeed.. I meant a border exactly like you showed in 9:38 .. the white border and reverse border you showed both are starting from one point and the length grows on two directions until closing. But i want that border to go in one direction only and close all the way round the picture and end at that starting point. I hope you understand what I meant to ask (sorry if I am not clarifying my problem properly, English is not my first language so it's hard for me to explain exactly.. i tried my best though)
I learn more from one of your videos than I do with 8 hours of others! Thank you!
Thanks so much.. >Really glad you enjoyed the video
This tutorial has so much difficult to find on my own and useful information. Thank you for sharing it with us, William.
Thanks for your comments. There is quite a bit in this one.
I have been using Resolve & Fusion for past 2 year and still learned so much here. Not just this one video but everything that you do, helps me with small-small things that I miss on regular basis in fusion. Love your work! And thanks a ton for all the Masterclasses. Truly using using Fusion at it's fullest.
I've been trying to figure this out forever and haven't seen any clear explanations on it, except for this one. Thank you!
awesome. glad you liked the video
Thank you for the tutorial. I was trying to figure out how to make a multicolor rounded border and while searching the web and multiple YT videos I did not find the answer until I came across your amazing video that teaches a lot good stuff for content creators. This is the best border video that I have found on YT.
Amazing tutorial, with detailed explanations, very helpful. Thanks
Glad it was helpful! Appreciate your comments!
One of the best video instructions I've seen. Very clear, and no time wasted babbling. Great work !
Hey Mark, Glad you enjoyed it!
youre really showing the power inside of fusion. I love these videos! Keep em coming!
hey Jeremy…glad you enjoyed the video. thanks for watching
Superb. I can see my sons brain ticking away pondering the various possibilities and permutations of what can be done.
You present the information clearly and cleanly that makes following along easy. I've watched others do Resolve tutorials and I find yourself easy to watch, listen to and understand.
Many thanks 👍 👍
Thanks... really appreciate it.. I am just trying to make videos about what I am learning and hopefully get a little bit better with each one.
Thank you so much! Your channel is one of the most useful tutorials on the Internet about Davinci Resolve!
Thanks for watching!
Your tutorials are just brilliant! There are too many things to learn from your tutorials.
Glad you like them! Thanks so much
This is too good. I don't deserver this 🥺 Thanks for making this.
Thanks... Really appreciate your support!
This is one of those tutorials that answers all the little questions that bothered u
Thanks.. Glad I was able to help answer some questions!
Man, Thank You soo much for providing us with fantastic guides, Your Awesome !!!
definitely the best Channel that I found so far, well explain ,very detail, do you make look so easy
thanks for all the information !!
Thanks. Glad the videos are helpful. Hope you make something great!
I always find your tutorials extremely helpful for the kind of projects that I am working on. For this, you have my full gratitude! Thanks
Thanks for the comments! Really appreciate your support!
I think you just changed my editing life... holy crap man, SO MUCH useful and powerful information in this video. Thank you!
Thanks... glad you liked the video!
Just stunning. My new favourite channel... Thanks for making such compelling, focussed content. All killer No filler!
Hi Paul... Wow thank you for your comments. Glad you are enjoying my videos!
Dude!! keep learning you're doing an awesome job. You make things easier with Davinci.... easier is good
Hi Marc, Thanks for the comments!
I’m new to editing in general, their are so many useful gems in this video❤🎃
Thanks for the Dazzling Border effect much appreciated!
Thanks for watching
Straight to the point, ZERO childish talk like what I have to endure when learning from many other DaVinci Resolve younger RUclipsrs. Thank you Sir! Regards from North Africa to you in North America.
thanks. glad you enjoyed the video. hope things are good in North Africa!
You rock man. Nice and easy to follow and just help me out a load.
Awesome! Glad to help
That intro was a huge flex FSSSS
thx. glad you liked the video
This is gold. Been looking for these answers.
you're always going the extra mile in your videos, the intro was straight up blowing my mind already!! you deserve so many more subs, and i hope there'll be more effects tutorials you'll be sharing with us!
Thanks for the comments.. More videos coming soon for sure!
one of the greatest Davinci resolve videos I've ever seen!
Thanks... Glad you liked the video!
Fantastic video. Thanks, so much for all that you teach us. Everything is concise and easy to understand...
Hi Rosie....Glad it was helpful!
Thank you so much💖
thanks for watching
Fantastic! Thanks so much. I'm using these ideas in a birthday tribute for my brother. Thanks again.
Hi Jeremy, That sounds great. Hope your video is awesome!
You make some seriously useful tutorials - thank you for your hard work!
thanks for watching. appreciate your support
Thank you , you are making it so easy and helping us a lot, please keep it up.
Thanks, I definitely have a lot more planned. Thanks for watching!
Your videos are all so entertaining and filled with great information. I always learn something from them even if they are not focused on a topic that I'm looking for at the time. I watch every one, and often many times. Thanks for sharing.. great work. 👍
Fantastic video William! Very Good information and delivered very well. The 'publish and connect to' is what i needed the other day. Thank you!
Glad it was helpful! Publish/connect is really easy to use. Just need to know when to use it. Thanks for watching!
You are so creative, its amazing!
Thanks
You keep upping the bar. Great intro and tutorial. 🔥✌
Thanks... Glad you liked it and hope you learned something or got a few ideas.
What a great Video just what I as looking for. Thank you
One more Great tutorial. Thank you for such valuable and informative projects.
Glad you like them! Appreciate your comments!
super informative! Thank you for taking the time putting this up. I'm a beginner and this helped me heaps!
Glad it was helpful!
Really great talk through on these borders and animations! Thanks for the great tips!
Thanks for the comments. Glad you liked the video!
This is reall what I needed today for my videoproject but did not mastered yet! My learning curve is very slow but your videos help me tremendously. I was able to use your slide panel seetting in my last project! Thank you!
Awesome... really glad to hear that you were able to use the slide panel. It always takes a while to learn new things. but each time you try something new.. it gets a bit easier.
thanks, this is incredibly useful! I finally understood how to make a border on my masked image on my very first video ever, and I will try everything else from your tutorial later on. Again thank you so much, I struggles for a good hour and you just helped me fix it in minutes.
Awesome. Really glad I was able to help you out!
Love your videos William. Thanks
Thanks
Always on spot, i always watch your channel
Thanks for your comments! Working on my next video right now!
Another killer tutorial. Awesome!
Hi DrHans... As always!!! Appreciate your comments/support. Thanks!
Every time I watch your tutorials I learn more things than I thought I would 😂 amazing tutorials man!
Thanks so much... really appreciate it!
William Justice could you please make a video on how to make electricity in different ways? Or like a fire effect? Thank you so much for your tutorials!
I wonder how it is that I didn't find your channel until today. Is RUclips recommendations broken or something? You explain things so well, it's easy to follow you. I learned A LOT of things I did not know. Like and Sub!
thanks so much. really appreciate it. now sure how the recommendations work, but glad you found my videos, hope they help you out.
Can't believe this tips are so hard to find. Imma sub real quick
Hi... thanks so much.. appreciate your support!
You are really helpful to me Thank you :D
thanks for the comments
Practical applications, love it!
Glad you like it! Thanks for watching!
Great video, lots of good tips on fusion techniques throughout. Cheers!
Thanks... for the matteControl.. it was just a convenient way to add the mask. Not sure if there is a better way but did not want to put the mask directly on the mediain. that would make it more difficult to reuse. Yeah... keyframe stretcher is not good but works (sometimes). Wish you could right click on a key frame and PIN it to the beginning/end of a clip.. color could change.. .ex. keyframe marker turns blue to indicate it is pinned to the end...
Also... not sure if you saw my previous video on the 3D generator... (you usually comment)... but wanted to let you know that I mentioned you in the video for you help on setting up the circle motion path.....Thanks for the helpfeedback!
The best William ... Thanks a lot
Glad you liked it!
Thank you very much!!! Very helpful. 🙏🙏🙏
Great video. Great lesson. Just wonder how this needs changes to become a flame border ?
Flame border sounds like a great idea. You could change the colors and bump up the distortion and it might look pretty good. But other ways to do flames... probably lots of different ways to do it.
Thank you so much man, this will really help me!
Awesome. Glad you liked this one!
The video i was looking for
Thanks! It helped me a lot
OMG Will, you made me laugh out loud right here. 0:17
Hey Scott... Glad you liked that!! Gotta have some fun!
Good video I plan on using your stuff more and more thanks man.
Awesome, Thank you!
This is dope! Thanks a lot for these awesome tutorials! 🔥
Thanks.. Glad you like my videos!
It is truly amazing and helpful, thanks!
Hi Darius, thanks... appreciate your feedback!
Another great tutorial!
Thanks!
Nice Video, Very well explained. Subbed.
Thanks for the sub!
very good Davinci fusion tutorial .simply and clear , actually the video should get more reader.
Thanks a lot! Glad you liked the video!
If I liked your video？I had a blast watching it! Amazing content you're putting out there, really loved it
Thanks.. Glad you enjoyed the video!
Thank You so Much For sharing this Skills with us ive been learning a lot form. You
Hi.. Thanks for the comments... Really appreciate your feedback.
learned a ton! Thank you!
Hi Matthew, Thanks for watching!
DESERVES THE BEST
Thanks for watching!
thanks so much i am going to do all my own animation for my youtube and my mixer stream dont worry i will for sure give u credit u are amazing for showing me what i can do on a free program
Thanks for the comments. Good luck creating an animation. Once you understand the basics you an do so many different things!
Great and simple!
Glad you like it!
Very creative!
Thank you! 😊 I always try to mix tings up and do something different if I can.
@@WilliamJusticeMedia that's great, man! Your videos are always fun and creative and playful. Your content definitely has a unique style and stands out. Keep it up!
ermahgerd where have you been all my life?!
Can you make a video on how to exactly configure the downloaded settings ??
Did you have trouble downloading? you just just need to click the link to go tot he download page, then click download (it is on google drive). That will get your browser to download the .settings file. You can then go to your browser downloads to find the file. Once you have the file you should be able to drag it into a fusion composition. Let me know if you are having issues and I will see if I can help you out.
Great video and unlike most "teachers", easy enough to follow. The problem arises - it's one thing to be able to follow you, its quite another to understand how everything works and to be able to do it on our own. How did you learn all this? Although be be honest, I could do this in After Effects in half the time and way easier. But Fusion is a giant challenge.
You are the best :) thank you very much :D
thanks
Great video!👌🏼💪👍
Glad you liked it!
Saved this one watched it 100 percent and will probably watch it 3x more to try getting it working on my clip. I am assuming you can box an element in a clip changing the size and position
Hi.. You can frame anything using a similar technique... This one one auto sizes, but you could remove the auto sizing parts so you can adjust it to be whatever size you want.
Excellent Video William. I just have one question how do I get into IMG under Master, Assets. Thx, Ian.
Great tut, definitly 👍
Appreciate it!
I loved it!
Thanks for watching!
Very hard to understand, but i subscribed u to get easy stuffs that i can mess with.
Kiya Alex from Ethiopia.
Hi Kiya, Thanks for your comments. Yeah,, I hear you... Fusion is a bit difficult to follow at first. But once you try out a few tings and and see how it all goes together, it starts to make sense.
Hey William. I'm a big fan of yours. As a RUclips creator myself I have switched over to DaVinci Resolve a few weeks ago as my goto editor. I watch many DaVinci Resolve videos and YOURS are my ultimate favorite. Love the projects that you do. Very creative stuff, and you're not a bore to watch. Yeah, you should have many times more subs than you do. I searched on "Davinci Resolve" and I had to scroll down like forever before I finally found one of your videos (this one). That's not good. I think you need to do some additional SEO for your videos. I notice you don't use many tags. Add as many as allowed. Be sure to include your title in your description, like this one "This video is about adding dazzling border animations & effects", for example. I WANT YOU TO SUCCEED BECAUSE YOU MAKE DOPE VIDS! Keep sharing, including your gimmes on your website. Feel free to contact me directly if you have any questions. my channel name at gmail is my contact.
Hi...Thanks for your comments. I hope the switch to Davinci is going smoothly. There is a lot to learn, but the basics should be pretty easy to pickup. I am learning and always looking for tips and advice to help me out and improve my channel. I will definitely use your tips. Thanks so much for sharing!. Even the little things can sometimes make a huge difference. Just finishing my first year on RUclips...I have lots of new videos planned... just have to find the time to get them done! But having a ton of fun!
You are always awesome man ! can you post tutorials of davinci resolve about text for a explanation video with other language like Tamil etc... Please help Man
Are you referring to the video description text? or subtitles/CC translation where you see the text on top of the video as I am talking?when watching videos you should be able to click the gear icon and then subtitles.. Think there is an option to translate to another language. I have not done much with other languages. If you can let me know what you are looking for, I can investigate and see if I can set it up.
I wonder why you published the Cornerposition . Why not use Instancing (Conected Copy )? Shortcut Control +Shift +v
I thought about using an instance, but decided to create a separate node because most of the settings between the 2 rectangles would need to be de-instanced... ex.. level, border width, border position, length , possibility the soft edge as well. To me it seemed a bit easier to connect a couple of properties instead of de-instancing. Just a preference.. Really appreciate your feedback... Thanks for watching!
You really know your stuff!
Thanks.... I know a bit but always trying to learn more and get better
@@WilliamJusticeMedia Yeah I'm learning too. I'm still pretty clunky with my keyframes and can still get caught up node structures. I picked up a lot of nice little shortcuts from this one though, so thanks!
Great instructional. How would I do this WITHOUT the image (skyscraper pic)? For instance, just have the animated border surrounding transparency? Thanks
There are probably a lot of different ways to do that. You could try using my highlight zoom effect. It lets you put a border around something in a video. ruclips.net/video/8N-lrbvBvVw/видео.html
Hi, Bill thanks for sharing this. I'm still stuck on Resolve 16, but was able to do make a fusion composition to create the kinds of borders I need from what I learned in your video. I wanted to go to the next step and create a macro that I can drag and drop onto a clip to create a border. Is that possible in Davinci Resolve 16?
Thank you so much Mr. Justice for putting this tutorial together, and the many more you have published on your channel. I do have a few questions for you about these types of effects.
I exported the settings for the basic animations using just the rectangles, nothing fancy, no rotation and such. The overall time for my video clip is 3 seconds, with the frames staring at 0 and ending at 71. Also, I followed your config to setup the transition at frame 9 and 10, moving 20 frames forward for the inner frame to take effect. The exported settings had a resolution (shot on a pixel 6 pro) of 1080 x 1920.
Issue #1: If I import a video with the same resolution and apply the exported settings it works just fine, the problem I am having is if I import a video with resolutions of 1920 x 1080, then the settings does not work. I will have to edit the .settings files to match the resolutions. Furthermore, modifying the properties in the Inspector to resize it, creates a mess when I apply the settings in Fusion.
Issue #2: The settings are based on the exported frame positions: 0 and ending on 71. If I import a video and trim out the beginning, thus extending beyond frame 71 (3 seconds) the effect wont work, it just shows the boarders without the border animation. I know you said to use the Keyframe extender, but how do you control that when the settings are set to position 0 and ending on 71?
My apologies for the long explanation, but I have tried many different formats and different video resolutions/frame positions, seems to break the exported settings.
Thank You!
Regards,
AC
Wow! This was super helpful and near perfect! Next I just need to figure out if there's a way to relocate my clip on the screen and have the mask move with it T-T But I am so thankful for finding this video, thank you ^-^
Suddenly wondering how you got 2 masks on the same screen with 2 different videos :o that's exactly what I need ahhh
Glad you liked the video. Hope you got things figured out. Once you play around a bit with masking it gets easier to make it do what you want!
@@WilliamJusticeMedia Thank you! I had some issues, but it turned out Davinci 15 was just buggy! I updated to 16 and I was able to get 2 videos with their own masks on the same timeline just fine. For some reason on 15, the 2nd video would "grab" all the videos underneath it when I tried to move it x-x
This is great! hope I can Implement it my experiments lol
Sound Good.. Hope everything works for you.
Did I miss something? I don't have all the "border style" in the inspector when I uncheck "solid" of the rectangle node. 😣
I guess something is wrong with my Davinci Resolve 16.1.2
EDIT: I updated to 16.2.2, and the "Borderl Style" is available in the inspector for the Rectangle node
Ok sounds good... So upgrading fixed the issue for you?
@@WilliamJusticeMedia Yes 👌
But now I don't know if it was an personal issue with my install or if it's was something new in 16.2.2. *Anyway, I can follow your great tutorial now 😁*
유용한 강좌 감사합니다...
Thanks
Super cool vids William.... QQ? I'm trying to insert an animation of dots or dashes into a small clip of film footage. IE dots going around a door mat on the floor or a sign on the wall. Do you have any tutorials on this please!
Thanks Chris
Thanks for your comments. I dont know how to do dots/dashes right now, but will investigate when i get a chance. If I find something interesting, I may make a video about it.
@@WilliamJusticeMedia Hey no worries. I'll try are sort it some other way.... This is what I was after. gk.qumucloud.com/view/SO2kUcuYbFX#/
Nice tutorial! Im having trouble with reusing the frame. When I group it, copy and past it into a new work it dosent load the assets onto the video. The Fusion effects and group is there, just not being loaded for some reason
U r amazing.... How u teach is the real key....simple stuff in details...
Sir one request, could please make a glass breaking effects tutorial?
I mean, video gets broken in glass effect...
Im AE there is already a preset (shatter) but not in DR
Broken Glass.. that sound interesting. Not sure if I can do anything with that but will add it to my list. If I get time and come up with anything good I will make a video about it.
great job William!
I have the same problem as LEDgendaryDIY.
On rectangle 1, the rectangle fit the image size when width and height are at 0.5 and not 1
another question: when we zoom the image , how can we mask the image when it goes out of the border?
Hi Bernard. Are you still having trouble with this. Sometimes the dimensions can get a bit off. if you can give me more details, I can try to see what might be causing your issue.
@@WilliamJusticeMedia Hi William, yes I still not have the solution. The goal is to have an image in backgroud and another image in foreground with a border. I can do that. But in some cases, i want to have to zoom the image in foreground but in a window keeping the same size.
As an example, in your video, it's to zoom ONLY your face in the border without going out of the border
Actually, when I do this, if the zoom is bigger than the border, the image goes out of the window.
I try different solutions in fusion, without succes.
( sorry for my poor english, I hope you will understand)
Bernard
@@bernardr.913 Hi Bernard. I'm not sure if this can help you. I was having some problems with the border and the portion of the image I was trying to use inside the border (something like a crop) and here is what I did.
Sorry my English.
ruclips.net/video/Erg9ochXFqQ/видео.html
@Bruno Vilela thanks for your suggestion, but it's not my question. What I want to make : zoom an image or video in or out in a fixed frame, like the demo
ruclips.net/video/Tr-Q0lZ7YIo/видео.html
@@bernardr.913 So Bernard. I think that with just one (two or three) nodes in my fusion composition of my previous video you can achieve what you want. Check this new one to see if this can help you.
Notice there is a "transform" node as my last node before the MediaOut1 node. That node is useless in this fusion composition unles you need to resize all the frame/image at some point inside fusion. So, indeed you don't need it there. I just let it there without any utility. for this short video purpose. :)
ruclips.net/video/julcfesJpic/видео.html
Well, you are not a beginner anymore. Things are getting serious fast hahah. Thank you for this amazing lessons, the publish and connect to was revealing. A small question, why did you use Matte Control at the beginning of fusion nodes?
Thanks so much. With this setup, i needed to have a mask on the main image for rounded corners. The matteControl is not required. The mask could go directly into the mediaIn instead of the matte control.... BUT i want this to be easily reusable... When adding the effect it is just quicker to just connect the medain in to one place... Instead of having to connect the medaIN and then add the mask on it. There is probably a better way to do it but this seemed to work for me.
@@WilliamJusticeMedia understood, thank you.
Your videos are great.. I need a rectangular border on a picture but a little different to what you taught .. I want the border to close in one direction only .. the rectangle you showed is closing in from both directions from the starting point .. Can you please help me with that
Not sure exactly the look you are going for but try going into fusion, add a background and put a rectangle mask on the background. Un check solid for the background and increase the border width. You can then adjust the lengh/position property and keyfframe that
@@WilliamJusticeMedia I tried but couldn't succeed.. I meant a border exactly like you showed in 9:38 .. the white border and reverse border you showed both are starting from one point and the length grows on two directions until closing. But i want that border to go in one direction only and close all the way round the picture and end at that starting point. I hope you understand what I meant to ask (sorry if I am not clarifying my problem properly, English is not my first language so it's hard for me to explain exactly.. i tried my best though)
That's great
Thanks
thanks very much
Thanks