Helpful video and this is an easier disassembly process compared to the complete removal of the circuit boards that other videos show. Do you have any recommendations for getting the new tires aligned at exactly the right location? Perhaps marking the spot that the original, now degraded PU rollers, occupied?
Friend,If your old tire has severely aged, a mark will appear on the shaft, and you can move the tire to the original mark position. If there are no old marks, you can use a knife to mark the iron shaft before dismantling! If you find it difficult to move the tire to its original position, we suggest that you order a complete set of rollers directly from the following link: www.amazon.com/dp/B0BD7YZ72P
A video for replacing the rollers for a Scansnap ix500 would be really helpful. I have ordered the rollers from you, but I have no instructions on how to proceed.
Dear friend,If the PU material has been oxidized and attached to the iron shaft, you must use a steel wire ball to scrub the iron shaft. This is troublesome! but this is a practical and effective method! Fujitsu has flaws in its design! If PU can be replaced with hard rubber, there will be no problem of oxidation and decay!
In this video right about 2:05, the roller cover plate comes right out, but mine seems to be hooked on something on what is the left side. I wiggle it and try to lift it, but it doesn't come out. I didn't actually unhook the front section, but that doesn't appear to have any bearing on this part.
Thanks for the video, do you happen to have the part number for just the rubber rollers you cut off in the video? I think I have the part numbers for the entire roller kit, but it seems like it would be much cheaper to just replace the gooey rubber tires. Thanks
Từ Amazon FBA:www.amazon.com/dp/B083LY9FQ3?ref=myi_title_dp Từ người bán:www.amazon.com/dp/B07XQLFWC7?ref=myi_title_dp Chú ý không dùng lực quá mạnh khi lắp đặt để không làm hỏng sản phẩm.
Opening this thing was hard as heck! Thanks for the video!!
Great! Thanks
Thank you so much! This was a tremendously helpful how-to video!
That's great!
Helpful video and this is an easier disassembly process compared to the complete removal of the circuit boards that other videos show. Do you have any recommendations for getting the new tires aligned at exactly the right location? Perhaps marking the spot that the original, now degraded PU rollers, occupied?
Friend,If your old tire has severely aged, a mark will appear on the shaft, and you can move the tire to the original mark position. If there are no old marks, you can use a knife to mark the iron shaft before dismantling! If you find it difficult to move the tire to its original position, we suggest that you order a complete set of rollers directly from the following link: www.amazon.com/dp/B0BD7YZ72P
A video for replacing the rollers for a Scansnap ix500 would be really helpful. I have ordered the rollers from you, but I have no instructions on how to proceed.
You can refer to the replacement video of fi-6130, the operation steps are roughly the same!
this video help me, thank you
That's great！It's my pleasure to help you!
Great description of the process. Any hints on removing debris from melted rubber rollers?
Dear friend,If the PU material has been oxidized and attached to the iron shaft, you must use a steel wire ball to scrub the iron shaft. This is troublesome! but this is a practical and effective method! Fujitsu has flaws in its design! If PU can be replaced with hard rubber, there will be no problem of oxidation and decay!
漂亮 谢谢分享 终于可以换 滚轮了
不用客气，能帮助大家是我的荣幸,如果有时间我会上传更多的安装视频。
In this video right about 2:05, the roller cover plate comes right out, but mine seems to be hooked on something on what is the left side. I wiggle it and try to lift it, but it doesn't come out. I didn't actually unhook the front section, but that doesn't appear to have any bearing on this part.
Thanks for helping me :)
Thanks
Thanks for the video, do you happen to have the part number for just the rubber rollers you cut off in the video? I think I have the part numbers for the entire roller kit, but it seems like it would be much cheaper to just replace the gooey rubber tires. Thanks
look on Amazon
yes,If you only replace PU tires, the cost will be much lower!
thank you !
Thanks
Thank you sir
Thanks
The scanner was thrown away in the end
this video help me, thanks :)
Great!
Mua cái này ở đâu bạn
Từ Amazon FBA:www.amazon.com/dp/B083LY9FQ3?ref=myi_title_dp
Từ người bán:www.amazon.com/dp/B07XQLFWC7?ref=myi_title_dp
Chú ý không dùng lực quá mạnh khi lắp đặt để không làm hỏng sản phẩm.
It did not help me