TomTom Go 520 - Attempting Battery Replacement
HTML-код
- Опубликовано: 4 июл 2021
- This is a quick 10min video on how to replace the TomTom 520 battery. Process is very quick and easy, it requires minimal tools to complete the replacement. Only thing I would say is that you need a lot of force to unclip the plastics and becareful you dont insert your pri tool too far or you face damaging the screen.
Наука
Excellent tutorial. Helped me to sort the issue I had with my TomTom, after buying a new battery. Thank you
No probs.
Perfect video I followed your instructions exactly replaced the battery TomTom go to go thank you
No problem 😁
Thank you for the tutorial! New battery installed and everything is functional again. The most difficult part, as you noted, is opening the cover of which is really hard to detach. My plastic scraper did not work so I had to use a pocket knife. I managed to dislodge the monitor cable which I had to reinsert manually in to its slot after replacing the battery. Aside from this all good!
Glad to hear it.
Thank you for this one. I almost destroyed this part of the casing, with no success. At the end, I decided to use my Dremel to melt and cut the plastic, and it was the best decision (2mm depth, 10mm large). Than I was able to unclip everything, and remove the battery, which was swollen and was forcing on the screen.
Well glad you got it sorted at least
Thanks for the insightful video. I cracked my screen though. 😢 DO NOT twist the prying device, only use a slide motion, with the cutting or back end of a mid-sized knife. Don’t rush it.
Agreed, slow and steady.
Great video, worked a treat! Thank you!
Fortunately I got the correct batter first time :)
Excellent work 👍
Many thanks for the tutorial.
That WAS a lot of force required; thank you for confirming that I was doing the right thing. My casing is mildly chewed. C'est la vie.
Perhaps you could provide a link to the double-sided tape required for re-assembly, please. My glass disconnected during the levering process !☺
But - the most important part of the video was showing how to disconnect the screen connector. Why? Because mine self-disconnected and I didn't require that stage !!! But I watched it in order to find out how to put that tiny, tiny connector back.
It's alive !
... and we're off on our travels again.
best wishes
Derek
ps, with the double-sided tape, the screen is now unresponsive.
!$@#*
Any suggestions would be appreciated.
The tape should not affect the touch screen, are you sure the cables are fully seated?
@@WeRepair
Thanks for getting back to me.
The glue holding the screen to the screen surround - also secures the screen ribbon connector, just not any more !
I've just ordered a new outer screen.
bonne année from France
Thanks, away to do my 620 soon. Handy video to see.
Glad it helped
Thanks for the tutorial, been having issues with my 520 not receiving traffic updates which apparently could be down to the battery failing to hold charge? Either way I’ll try a new batter and go from there. Thanks 🙏
Good luck
ive replaced the battery but havind difficulty putting back together the sensor wire has come off the back is it a certain place to stick it to please
My TomTom Go 620 is keep shutting off randomly. Looks like battery issue. After watching this video i will give it a go soon. Ordered a new battery from Amazon. Thanks for sharing this video. Will let you know if i have a success. 😊👍
Good luck
How did you go with the Go 620. Did it work for you and is replacing the battery the same as for this tutorial???
@K-K-Katie yes replacing the battery did work fine and it's the same procedure as explained in the video.
@@zaf151 thankyou
Very useful video. My god it was hard to do the clips. Only other thing worth noting is that the screen connection is at the same side as the start point to unclip, so you need to be careful not to pull that side too far open when going around the screen, and then flip up from the other side.
Yes agreed
Great tutorial, I have the tomtom go 520 professional and assume it's the same battery. Do you have a link for the 1 you bought? Thanks.
I think I purchased it on Amazon, will see if I can get you a link.
Thanks for that, very helpful.
Glad it was helpful!
Very helpful. Thank you very much
No problem 😁
Well done,.thank you very much. I should have a go now
No probs, quite a straightforward repair.
@@WeRepair one thing still puzzle me. I am going to change the battery of 6200 I bought some five years ago. No sure which replacement shall I go for, one with a three pin plug and another with a five pin. Which one shall I go for?
thanks just done mmine very easy took more force than i thought but battery great and only £5 from ebay
Welcome 😁
Thanks very much for making a video
My pleasure
Would like to know the tool you used and where I might get one?
Metal spudger, some where like eBay or ifixit
Thanks for sharing what is that spade tool called that you used to open the case?
A metal spudger
Thanks I ground up a hacksaw blade put some heat shrink on it for a handle and it worked well👍
@@ishure8849 i uses a 6" metal ruler lol
Great video, our t be more helpfull other than doing it for me. Thank you !😁
Great video, thanks. It made me realise I wasn't likely to break the case when trying as hard as I was to get it open. Wow those were the strongest clips I've come across!
Do you know if the tomtom 520 will power up without the battery in and getting power by USB? (my old one does but the 520 I am fixing doesn't) I just want to try and make sure something else isn't working befoer I order a battery for it. Thanks.
I don't believe it will. Battery has to be installed.
@@WeRepair Thanks very much for your reply, and so quickly. I've just tried a normal (charged) 3.7v Li-ion flat-shape battery without the thermister wire and that didn't work, so it probably detects the missing wire as a fault. If you don't think it will work without a battery I'll take the plunge and order a proper replacement. If it doesn't work I'll just keep it for something else. Thanks again.
WHAT TOOL DID YOU USE TO GET BACK OFF PLEASE
A metal spudger, should find them on eBay
Any chance to send us the link for the battery ?
Thank u
Try this one: amzn.to/3SODMR6
super video gut zu verstehen !!!! weiß jemand wo ich das werkzeug zum öffnen des gehäuses beziehen kann ?
www.amazon.co.uk/iFixit-Spudger-Modelling-Sculpting-disassembly/dp/B010O73XI4/ref=asc_df_B010O73XI4/?tag=googshopuk-21&linkCode=df0&hvadid=258366679845&hvpos=&hvnetw=g&hvrand=17294249541946498805&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1007068&hvtargid=pla-453488580638&psc=1
TomTom Go Professional 6200 HGV 6” sat nav opens from the bottom just like this with a metal pry tool to separate the clips. Make sure you pry between the back case and the grey surround, not the screen and grey surround. There is an indent where you start on the bottom centre.
The replacement battery is a VAFD 3.7v 1100mAh battery with 5 wires.
My replacement battery is labelled VF6P 3.7v 1100mAh with 5 wires and it fits fine and charges.
Time will tell how well the replacement holds charge compared to the original.
As you look at the screen, the LCD+touch panel screen cable is to the bottom right, opposite side to the battery on the left.
Hope that helps someone.
Amazing 😍 thanks 👍
my tomtom not working
Sorry to hear that, what's up with it?