After the Install, you drive with the Boys in a Awsome Offroad Place i love it ! Very nice Install it looks Killah👍🔥🤙 . Very Nice Video Keep it up . And Big Thump up 🤜🤛👌
Lookin' good buddy! I love the rock lights. 14:06 - How did you know? I had a Caesar while I was watching your video - LMAO That trailer makes for a decent little work shop.
Went back through videos and sorry I noticed that you put the old Qsc revx from the 20 and the Dalton (black violet spring) in. I guess that says it all! If your willing to take from one machine and go the next,same clutch and the hard miles it received as a loaner(sales tool)that it received speaks volumes of QSC(quad shop customs) strength and reliability.✌️
Gonna be ordering some outlaw 3’s and going to a 28 since I’m clutched for those I beleive. It’s a 2010 850, top out at 68 and that’s going off of limiter though. Been one hell of a machine and will be replacing ball joints here in a bit. I have some mega mayhems but I’ll probably end up selling them because I don’t like them
that pre-screen/radiator protector will not prevent mud build up. It actually makes it harder to clean your rad, unless you frequently take it out altogether and clean it. I relocated mine on my last Renegade and it was the best Mod I did. Just my 2 cents
@@ehTV1000 Mine worked great for almost 2 years then I had a terrible time keeping rad clean. I figured if I was going to go to the trouble of taking out the rad to clean it I might as well relocate it. I ride a good amount of mud which I've seen you do too. What have you done to keep it clean?
@@ehTV1000 im curious with you being in ontario was there a duty or import fee to get your stuff from farmudding? im wanting to order some stuff from them? also do the factory foot pegs with the new foot wells? if not how do the new ones feel in comparison?
I just got me a 2021 model recently and it’s awesome! I ordered those led halos from Far Mudding after watching this video and I was just wondering where exactly did you drill the speed holes in your headlights?? Couldn’t tell from the angle of your video and I would definitely rather not take them apart.. just couldn’t figure out a good spot to drill.
The bike looks great👍and looked like a nice night mission 😎. I like the axle guards but I think for your "skeg running" shenanigans i think they will end up collapsing and trashing your axle boots, hopefully I'm wrong but I guess time will tell. Again bike looks great and sounds great,I don't know if you said in any of any of your videos,and if this has been covered then I apologize for "beating a dead polaris" but what clutch are you running this time around?✌️
More worried about ice and mud collection ripping them, but we'll see. Least I can do is try them out for others not to make the mistake if that's the case.
Wow. She looks mint. 👌 Great video, keep up the good work. Also how do you clean the deep snow of the quad? I have trouble with that on my kingquad and it always ices up.(my shed isn’t heated and I have arm guards like you just added that catch the snow like buckets) I clean off the big stuff with my hands but it still ices up, especially around the cv boots which I have a bad history of tearing due to sticks and ice, any tips?
Dam nice. Might have to get the 850 xmr. Thanks for showing us the suffering. I don't feel so bad looking and feeling old crawling out from under the rig .)
Hey how well does the dry box in the rear rack hold I don’t wanna be on a long trip and have my phone and there and it falls off. Has it ever fallen off?
Wanna do clutching on mine . Do I have to get both the QSC primary and the STM. Secondary or can I run one with the other clutch stock? If so which one gives me more power to the ground? Thanks for your input bud. In advance
Try out the assinators 30 in this time
Yes yes !!! New video agan nice 👌 💯 Looks amazing Renegade 🤘
Nice One!!
Do you ever think a renegade 570 xmr full tuned and clutched could keep up with you and your group
Some nice looking goodies you put on the best there! Those lights look cool on that night ride, right on buddy!
After the Install, you drive with the Boys in a Awsome Offroad Place i love it ! Very nice Install it looks Killah👍🔥🤙 . Very Nice Video Keep it up . And Big Thump up 🤜🤛👌
Gotta get a little action in there eh. I appreciate it and will do brother.
@@ehTV1000 🤙🤙 Ohh yeahhhh Brother 💯
Do you have part numbers for the diff covers and rear skid pan?
Lookin' good buddy! I love the rock lights.
14:06 - How did you know? I had a Caesar while I was watching your video - LMAO
That trailer makes for a decent little work shop.
It works, easy to heat up to. Haha. Caesar eh, hmmm
I finally got my 1000 can am 2021
Renagade or outlander
Time to start making some videos with it! Let’s see it
Congratulations
Thanks
@@ehTV1000 please for tires check out either terache Aztecs or juggernauts be wicked
What happened to the 2020 Renegade? Do you just have 3 now?
Went back through videos and sorry I noticed that you put the old Qsc revx from the 20 and the Dalton (black violet spring) in.
I guess that says it all! If your willing to take from one machine and go the next,same clutch and the hard miles it received as a loaner(sales tool)that it received speaks volumes of QSC(quad shop customs) strength and reliability.✌️
Darn straight!!
Do you have any heat in the trailer?
Gonna be ordering some outlaw 3’s and going to a 28 since I’m clutched for those I beleive. It’s a 2010 850, top out at 68 and that’s going off of limiter though. Been one hell of a machine and will be replacing ball joints here in a bit. I have some mega mayhems but I’ll probably end up selling them because I don’t like them
Looking killer Man!
I have climbed that hill a 100 times, super dicey in the winter time!
Can be when it's ice covered.
Where did u buy the led rings? I’m italian and i can’t find them here, so I’m looking for them abroad. Thank u and big up❤️
Who did you get the light from?
that pre-screen/radiator protector will not prevent mud build up. It actually makes it harder to clean your rad, unless you frequently take it out altogether and clean it. I relocated mine on my last Renegade and it was the best Mod I did. Just my 2 cents
I've been running one for years and and works great for my style of riding.
@@ehTV1000 Mine worked great for almost 2 years then I had a terrible time keeping rad clean. I figured if I was going to go to the trouble of taking out the rad to clean it I might as well relocate it. I ride a good amount of mud which I've seen you do too. What have you done to keep it clean?
Just did them far mudding floorboards on my outty, great quality and look amazing
Mint, Fred's got some great footwells without a doubt.
@@ehTV1000 yes they do, love them halos to. Good people to deal with. The xmr is looking sick. Are you going bigger on the tires
@@ehTV1000 im curious with you being in ontario was there a duty or import fee to get your stuff from farmudding? im wanting to order some stuff from them? also do the factory foot pegs with the new foot wells? if not how do the new ones feel in comparison?
I just got me a 2021 model recently and it’s awesome! I ordered those led halos from Far Mudding after watching this video and I was just wondering where exactly did you drill the speed holes in your headlights?? Couldn’t tell from the angle of your video and I would definitely rather not take them apart.. just couldn’t figure out a good spot to drill.
Up into the plastic lip just in front of lights. Not noticeable at all.
10-4 imma give it a try thank you for your your courtesy takin the time to reply back love your vidz keep em comin!🤙
The bike looks great👍and looked like a nice night mission 😎.
I like the axle guards but I think for your "skeg running" shenanigans i think they will end up collapsing and trashing your axle boots, hopefully I'm wrong but I guess time will tell.
Again bike looks great and sounds great,I don't know if you said in any of any of your videos,and if this has been covered then I apologize for "beating a dead polaris" but what clutch are you running this time around?✌️
More worried about ice and mud collection ripping them, but we'll see. Least I can do is try them out for others not to make the mistake if that's the case.
Looks great! Where abouts do you ride?
You should run some naters again
I haven't run them yet, but I can see why you might think I have as everyone else is running them that I ride with.
What kind of trailer do you got? I like the roof you got and the size. Is it a 7x14 or 7x16?
7x14, 16 to the nose
Wow. She looks mint. 👌
Great video, keep up the good work.
Also how do you clean the deep snow of the quad? I have trouble with that on my kingquad and it always ices up.(my shed isn’t heated and I have arm guards like you just added that catch the snow like buckets) I clean off the big stuff with my hands but it still ices up, especially around the cv boots which I have a bad history of tearing due to sticks and ice, any tips?
Not really, I use a space heater for a day or two after the wash. Then she's good to go!
@@ehTV1000 thanks man
That's a beastly looking rig my dude. Nice job.
What all did u buy to set up the lights did you buy a wiring kit or two? And is it hooked up to a switch?
All included in the kit, no wiring needed, both rocklights and halos work together. Super easy install. We sell both at n2ytire 705-739-4130
@@ehTV1000 do they come on when you turn on the fourwheeler?
What is the brand/model of those ligts?
Where buy this led?
You should check out some of the stuff that performance atv in Orange, TX makes for these. They build some bad stuff there.
Right on, so many wicked shops turning out killer machines these days. Gotta love it!
Can you use the stock foot pegs with those far mudding floor boards?
Ya can if ys wanna trim the peg. He put mounting holes for them.
Thanks bud!
Hey mazz whats the part number for those rear diff protectors?
Not sure, ring Bay up and see eh.
@@ehTV1000 okay.
Dam nice. Might have to get the 850 xmr. Thanks for showing us the suffering. I don't feel so bad looking and feeling old crawling out from under the rig .)
Yeah, eh. Hahaha. 850 is a nice rig, plenty power to be had.
Hey how well does the dry box in the rear rack hold I don’t wanna be on a long trip and have my phone and there and it falls off. Has it ever fallen off?
It has, so I run a cord over it for safe keeping. Water tight for sure
@@ehTV1000 ok thanks for the info and that 2021 build is coming along sick man!!
Wanna do clutching on mine . Do I have to get both the QSC primary and the STM. Secondary or can I run one with the other clutch stock? If so which one gives me more power to the ground? Thanks for your input bud. In advance
Ya want primary and most folks just do a spring swap on secondary.
@@ehTV1000 copy that bud thanx
I still gotta put my halos on my 2020 outlander xmr so your saying just drill plastic no need to remove headlights eh?
Yup pretty sure it's the same procedure on the Outlander. I hate doing headlights on these things. Outlander setup might be different though.
Yeah I’m pretty sure the plastic is just as thin lol. But yeah just diff sizes
Guna have to call bay & get these same upgrades, The rear skids are no brainers!
Absolutely, the three pieces aside from the rear axle guards should come standard! Do ya Hear that Can-Am!!!!
@@ehTV1000 amen 🤘🏼haha
Do you plan on doing a rad relocate on the new 2021?? I think it would look good and run much cooler in the mud
Nope, said so at the start of video. The pre-screen and tune should help that. Andy also adjusted fan to come on early when he flashed her.
Oh I didn’t hear that part in the beginning I had my 3 kids in the living room screaming and laughing 😂
Awesome video as always 👍👍👍
Much appreciated my friend
What kind of lights are those I need them for my Can-Am Outlander XMR 1000r
Farmudding.com
Whats name off the app
Try some outlaw 2s that would be be sweet
look into a set of STI Outback Max tires bud & man oh man do the rene ever have a loud bark, sweet vid boss
Man does it ever! Straight nasty sounding unit with this setup. Super happy the way she's shaping up.
Where did you say you got those diff covers from?
Bay Marine, It's a Can-Am product.
Just tuning in let’s just say coffee break hahah 🤟
Right on, cheers brother
What tires are you runnin man
Xm310s
Are you gonna get some assinators
Yup
Where ya get that pre screen bro is that a brp piece
Yeah, been running one on my 18 a couple years now. Works mint. Should be standard on all xmr models.
@@ehTV1000 this is how they get all our money 🤣🤣
Love the vid as always stay safe brother the Rene looking how she should brother full sends love the vid
Big fab
Fab
@@ehTV1000 fan I meant
How do thoses tires do
Wicked
Try out the out laws or the criptids I wanna know how they hook with the nasty riding you do
Cryptids aren't worth a damn in the real bad situations.
its like youre the tim allen of atvs
Did i miss something why are you working out of the trailer?
When I work on it at my place it's the shop. No garage here, would like one though. But gonna have to move first.
you should try terminators i feel like you'll really like them
I ran them on my old kingquad. Heavy if I recall.
what light kit is that?
Farmudding.com 2.0 multi's. Super slick setup. Very clean
@@ehTV1000 Thanks Brother!
I would go with the Assassinators
Debating on it!
Put a new slick ass custom yellow bumper up front to follow the headlamps....something slick...... different than everyone else’s
Grooved assassinators
Get some 31 inch motohavoks!
Put the 35’s on that’s in your trailer haha
Looks mint as $#!&, assasinators or new outlaws?
Outlaws3?
Outlaw 3!!!!
Looks killer man... sweeet
Try some interco boggers
Find some juggernauts this time!
go with 32 assinators or I dont know the biggest they make them try the sledgehammer
Haha, and that is why i jsut gave up on rivets, use bolts and nuts for everything. XD
Man these were some beefy rivots. Lol
@@ehTV1000 U do know u can get them air-powerd? 😂
Some 33in bkts this time
Try some STI R4 tires 🤙🏼
or you could put interco snipers
👍👍👍👍
nice..nice..💪💪💪💪
Thank you sir
I’m back bois might be getting my first xmr. renegade 570
Congratulations
@@ehTV1000 Thanks
get the asasinators for her
put 32 Interco black mambas
Wow now you are talking some serious weight!
@@throttlepinnedatvsxs maybe BUT they bite very well
Wow looks awesume ehhhh
Thx man
Try terache Aztecs. I’ve heard they bite well
They do well on my buddies scrambler
Inter force 2s
I ran those, never again unless there cut!
Sick bud
Try sum 32 assinators
I've almost placed the order multiple times. Lol
32-34 assasinators
Fuck yeah Bro. I just got the chasing Halo's now and the rock lights ordered today. @farmudding @ehtv. Great video
Sume Super Swamper boggers would look sweet on that thing man
First
Silverback mt2
You need a garage brother lol
Wife doesn't wanna move, as her mother lives next door. Looks like I'm in the shed/trailer for a few years to come. Lol
@@ehTV1000 do what ya gotta do. Hope that little heater is keeping ya warm out there lol 🤙
Get assinators
Terache Aztex
They work good to, always forget about them.
@@ehTV1000 Yup, they do pretty good. And they are pretty lightweight for a mud tire.
Or black mambas
Go 30 assassins
Thinking 32 if I go that route
👍👍👍🙏
Put boggers on it lol
Assasinators
Terache Aztex