Great video it did the trick for me . I thought I had to take out the whole damn carburetor out but it was just the spark plug as shown in the video ….. awesome video thanks for making it
It did for me last year , i drained it s fuel put fresh fuel in it no start , starter fluid no go, flip the machine up and remove the bowl and the jets very easy , holes were clogged. They get gunked up from the dam ethanol ,even with stablizer wont work sometimes . This machine is brand new my craftsman used 2 times , it is ridiculous that i need to go through this almost ever year .
Same I got a brand new one I stored for summer and on winter did not started My oldie was a craftsman I retired it because it was old and now I am paying the price .
First snow in almost two years and wouldn't you know it the ole snow blower would not start. Checked for spark which looked good and the plug looked wet but No fire at all. Tried your trick and sure enough she fired right up for a second or two. Drained the old gas and replaced it with fresh and I am back in business. Thanks!!!!!!! Just as a side note I did start the blower a couple months ago and I noticed it didn't start as fast as usual but I didn't think that meant trouble ahead. I was wrong.
Great video. I know people seem to like silent videos but I’m old school. I like knowing what’s going through someone’s mind to go to tge next step. Maybe I missed it, but did you remove a bolt to get that opening you sprayed carburetor cleaner in? It’s weird because every other engine I’ve ever seen has an air filter, but guessing there’s no dust blowing snow, lol. Ones with an air filter are easy to give a shot of starter fluid, etc. thanks, I need to get mine running, snow is on the way!
@@31careloco I watched this one, so that’s good to try. Sometimes it just needs to get started, then it will run? It seemed the first video I saw, may have been your channel, they sprayed carburetor cleaner in what looked like a little hole in the engine top from what I recall, no worries, thanks again
3:42 you didn't tighten the spark plug enough. And you didn't fix anything. The "Carburetor Cleaner" is highly flammable and that's WHY the snowblower started. Spraying that cleaner into the cylinder washes off the protective coating of oil and the carburetor cleaner seeps down past the rings and gets into the oil which thins it out and will lead to premature bearing failure. If the snow blower is hard starting take the carburetor apart ( find somebody that knows how to take it apart ) and then soak it in a parts cleaning tank for several hours. then rebuild it.
worked for me !!!Thanks bro ,,,three yrs sitting wouldn't start for shit... 2 minute fix!!!
PERFECT!!!! LIFE SAVER!! A MILLION THANKS MY BROTHER!!!
Worked Perfectly!! Thank you so much.!!
Great video it did the trick for me . I thought I had to take out the whole damn carburetor out but it was just the spark plug as shown in the video ….. awesome video thanks for making it
It did for me last year , i drained it s fuel put fresh fuel in it no start , starter fluid no go, flip the machine up and remove the bowl and the jets very easy , holes were clogged. They get gunked up from the dam ethanol ,even with stablizer wont work sometimes . This machine is brand new my craftsman used 2 times , it is ridiculous that i need to go through this almost ever year .
Same I got a brand new one I stored for summer and on winter did not started My oldie was a craftsman I retired it because it was old and now I am paying the price .
First snow in almost two years and wouldn't you know it the ole snow blower would not start. Checked for spark which looked good and the plug looked wet but No fire at all. Tried your trick and sure enough she fired right up for a second or two. Drained the old gas and replaced it with fresh and I am back in business. Thanks!!!!!!! Just as a side note I did start the blower a couple months ago and I noticed it didn't start as fast as usual but I didn't think that meant trouble ahead. I was wrong.
just trying to help and don't forget to live a like please
Thank you ! Did exactly the same and it's up running again.
Try it and then tell me it worked for me
i told you it may work
Use canned gas, and Seafoam in the fuel tank with the gas from now on; no more starting issues.
Worked or me on my Ariens Deluxe 24", thank you!!!
always welcome just live a like to support
Nice trick I will try it thank you
Great video. I know people seem to like silent videos but I’m old school. I like knowing what’s going through someone’s mind to go to tge next step. Maybe I missed it, but did you remove a bolt to get that opening you sprayed carburetor cleaner in? It’s weird because every other engine I’ve ever seen has an air filter, but guessing there’s no dust blowing snow, lol. Ones with an air filter are easy to give a shot of starter fluid, etc. thanks, I need to get mine running, snow is on the way!
im working un putting audio on a short and thanks for the commen
here take a look at this one ruclips.net/video/MmrYEK6H5mo/видео.html
@@31careloco I watched this one, so that’s good to try. Sometimes it just needs to get started, then it will run? It seemed the first video I saw, may have been your channel, they sprayed carburetor cleaner in what looked like a little hole in the engine top from what I recall, no worries, thanks again
Great video !! Thanks eh
im just traying to help
Just a like 👍 will help me
The one I'm using there is a 1/2in now the socket is 5/8 but you have to check your may be different
Great video 💪💪Ty
thanks
Is this product the same as Carb/Choke and parts cleaner?? That's what I was able to find on the internet
Pretty much the same stuff
3:42 you didn't tighten the spark plug enough. And you didn't fix anything. The "Carburetor Cleaner" is highly flammable and that's WHY the snowblower started. Spraying that cleaner into the cylinder washes off the protective coating of oil and the carburetor cleaner seeps down past the rings and gets into the oil which thins it out and will lead to premature bearing failure. If the snow blower is hard starting take the carburetor apart ( find somebody that knows how to take it apart ) and then soak it in a parts cleaning tank for several hours. then rebuild it.
Or you can just spray carb cleaner in the spark plug hole and save like a gazillion hours. Life = too short. YOLO! 😂