Co-worker was having a difficult time operating this machine. With a weakening resolve I turned to the only source where someone like yourself could save us from defeat. Thanks to you we have now bound all of our papers. Graci!
You are so right when you say the manuals fall short of being comprehensive in explanation. Thank you for your clear, concise demonstration. Very helpful
Great instruction, but wondering if there is a way to adjust the punches on the left? It seems as though they're too close to the edge. I've found no way to adjust on my machine ~ When I get it done professionally (i.e. Kinko's, etc.), the punches are not so close to the edge.
I have difficulty passing the spread plastic comb fingers through the rectangular holes of the document. After opening the plastic fingers, there seems to be too little part of the fingers available for an easy passing, even though I always use the comb size recommended by the comb manufacturer (based on the number of sheets). I wonder whether there is a trick around this problem.
Can any one help me out plz i have a pavo and not sure if i can make the holes for the binding wire .sorry im trying to do a/5 calendars but small binders not any goid so bought 10mm but holes on paper are now to small for the 10mn and small binders dont hold my 12 sheets of paper thank you so much
Hello, May I ask a question? I have been using a manual machine and one of the pins got stuck down, so now it won't lift and I can't fit the pages. Do you know what can I do to fix it? Thank you.
Place the comb BEHIND those tall teeth with the closed teeth towards the front. Slip the punched pages in the open teeth that are towards you. Maybe I am too late; just saw your comment not answered,
Your tutorial is useless because you show how to load the plastic binder from four feet away and no one can tell how it fits into the machine. That’s what I needed help with and your “tutorial” didn’t help one bit. You need to cut to a close-up of you loading the plastic binder strip into the machine or else rename your video, “Watch me use a comb binder.”
Co-worker was having a difficult time operating this machine. With a weakening resolve I turned to the only source where someone like yourself could save us from defeat. Thanks to you we have now bound all of our papers. Graci!
Great demo! Saved me from a lot of trouble. Many thanks!!!
You are so right when you say the manuals fall short of being comprehensive in explanation. Thank you for your clear, concise demonstration. Very helpful
This really helped me today
Thank you
The Alton Brown of office supplies.
I wanted to punch a whole stack of papers. It didn't want to punch. This was really helpful, thanks
This is exactly what I was looking for.... thank you so much.
Thank you so much that was really helpful
Thanks a bunch.
This video really saved me today
Wow thank you so much Mr. this really helps hehe
Excellent video, very informative !
tq... i learn to bind today... n feling useful to masyarakat n kerajaan
😍🥰
Well explained, Thank you for sharing this with us. It's helpful.
Easy to assemble, good strong materials, feels good, looks good.
this was heplful thank you very much
Like wow,your explanation is so succinct...i was able to do this right away, Thanks so much.
Your welcome! Glad we could help.
Good presentation
Thank you, this video was very useful!
whoever came up with youtube should get a through pass to heaven.
Great instruction, but wondering if there is a way to adjust the punches on the left? It seems as though they're too close to the edge. I've found no way to adjust on my machine ~ When I get it done professionally (i.e. Kinko's, etc.), the punches are not so close to the edge.
Thanks very helpful
Awesome, can you get the same thing for spiral plastic binding?
I have difficulty passing the spread plastic comb fingers through the rectangular holes of the document. After opening the plastic fingers, there seems to be too little part of the fingers available for an easy passing, even though I always use the comb size recommended by the comb manufacturer (based on the number of sheets). I wonder whether there is a trick around this problem.
Thanks Sir, its very easy steps.
Can you use the wire combs?
MAGIC!!!
you helped a lot of intern like me hahahah
Thank so much for your clearly explain
this was helpful - muchly - thanks - love the internet !!
muchly? where r u from?
Haha! maybe its a figure of speech or maybe idk.
How do you insert the spine
Thank you so much!! It really helps!
thank you so much it really really helped
Can we use wire comb instead of the one used in vd plz ?
good video, thanks
You're welcome!
Thank you!! Learned it.
When you have 5 minutes left to hand in your report and the action starts at 4:45...
How do I install the lever?
thank you brother
Can any one help me out plz i have a pavo and not sure if i can make the holes for the binding wire .sorry im trying to do a/5 calendars but small binders not any goid so bought 10mm but holes on paper are now to small for the 10mn and small binders dont hold my 12 sheets of paper thank you so much
I had to buy a comb binding machine so I could bind together a manual for the last comb binding machine I bought.
thanks. this was very helpful...
Whit is the value of the machin, and address in wb where I purchased,
Thank you, very helpful.
Can you unbind a comb binding
Place the comb BEHIND those tall teeth with the closed teeth towards the front. Slip the punched pages in the open teeth that are towards you.
How many about price ?
Mine just got jammed, the papers got stuck inside....How can I fix this?
Hello, May I ask a question? I have been using a manual machine and one of the pins got stuck down, so now it won't lift and I can't fit the pages. Do you know what can I do to fix it?
Thank you.
You should show how to uncomb/unbind. You just have to insert back then push the lever.
Nice machine. I want to buy, what is the cost of Indian money.
can you tell me if this does Legal size paper? (8 1/2 x 14)
Thank you omg
Plastic is jammed in the binder, how can i remove it
Very helpful...thanks!
Please I want this Machine, How to get
Kya price hai
Thank you . Good Clip.
how much price ?
Thanks so much
thank you
Thank you Johnboy
Asante Sana
it helps thanks.
Thanks!
Binding 3 paper sheets are easy. But try more
Genious
Thanks ! :D
Brilliant, thank you! Very helpful :-)
3:17
Combinding machine?
does anyone know if you can do a 12x12 scrapbooking binding on this
Show a top view so people can see how the comb opens
thank u
Great
Super
You're too quick when you put the comb on the fingers I cannot see how it's positioned.
Place the comb BEHIND those tall teeth with the closed teeth towards the front. Slip the punched pages in the open teeth that are towards you. Maybe I am too late; just saw your comment not answered,
3.59 😂😂😂 no 👎
horrible too long!!!!!! it should be that complicated we don't need to see you punch holes in papers
Your tutorial is useless because you show how to load the plastic binder from four feet away and no one can tell how it fits into the machine. That’s what I needed help with and your “tutorial” didn’t help one bit. You need to cut to a close-up of you loading the plastic binder strip into the machine or else rename your video, “Watch me use a comb binder.”
this is not useful. I need to know the margin settings and such things, not how to use the handle.
Perhaps the edge guide is on the back of the machine.
camera angel not good..so can't see properly how you put that spring in machine
thanks you very much
how much are the machines?
Thank u
thank you
Thank you
How cost this machine
thank you