I love your review, entertaining as always. His joints aren't squeaky, that is just the sound of the mating cry of the Pterodactyl. And I think that if Rocket Scientists stuff up, they'll compare themselves to Brain Surgeons.
i just want to thank you again emgo for what you do i just got my copy (blue version) and wow third party instructions are terrible lol. I couldn't figure out what one part was for and the instructions didnt say your vid showed me it was for the wrist. so once more you saved me man. NEVER stop doing what you do!
They could've added a bit of paint in order to pick out the details. Side note: I know they're more then likely going to come out with the Triceratops (can't remember his name right now, haven't had my tea yet), but who else. At least, if I remember our last conversation, Emgo.
hmm.. is it just my sound, or every time you speak and use a loud ratchet on the toy, your voice becomes 'ratcheted' O.o anyway, this looks like the best swoop i've seen atm :3
+emgo316 @15:24 , you mentioned that the sword is held oddly by the combiner hands. I noticed that, too, what with the bar hanging off on the front. These are just some wild guesses, but i'm guessing either the hand is meant to hold the grip like a gun handle or wrapped over the fingers, like you showed in the review. Idk if GCreation noticed this issue yet, but if it does get to where it's a bother, there's always clipping the bar off or GCreation could have their take on Slag come out with an attachment to the sword (most likely a fancy handle with a crossguard).
3:10 Rocket scientists use brain surgeons for comparison Does this have any die-cast because the body looks like it does? If not that is good metallic paint. FYI the video freezes, for just a few seconds, at about 9:33. Not a complaint just letting you know
I would think that Blade would actually look weird holding a sword as big as he is. I'm betting if you snip that post off the combined sword, Shuraking would hold it just fine.
Once you get Shuraking completed, will you compare him to ToyWorld's Devastator (Constructor)? Finally have it how it should have been, All the Dinos teaming up to kick (or try to kick) Devastator's butt.
I just preordered my first Gigapower (Snarl) 2021 reissue. Would you tell me if this Swoop would scale well with it and my Reximus Prime? Looks as if Giga and Reximus would work well together (one less of the team id have to re buy lol) The wings in this really hold attention and was just curious how'd he would work with Gigapower Snarl and my Reximus.
@@emgo316 Thank you anyway. It looks like it'd be a close fit. Just figured since I don't care if I have the full team made by the same company, I'd go with my Reximus Prime and buy GCreation Swoop and save some.cash. And the rest of team be Gigapower. Hopefully someone will reply about this. Thanks again.
love your videos and i just wish i could be meet you i watch your vids to make me happy i was sad once watched your vids and i was happy you made me laugh and when the video ends i start another one and ive been subbed since 30,000 thank you from your fan Nick
Anyone else notice emgo hasn't really pointed out too many misspellings for the Dino-combiners like he does for other reviews, because he hasn't pointed out on the back of the collector cards it's spelled capabiliy not capability
+emgo316 oh emgo how I wish I could live a life like yours where people weren't assholes and people weren't getting on you for having an opinion real life doesn't constantly fall apart no matter how much you try to move on I've tried so hard to move on in life even use you as a good laugh you give me good laughs all the time or at least you used to its not you emgo in other words emgo hold on to what you have because in the blink of an eye it could all be gone I hope it doesn't you don't deserve that you deserve all the love and possessions given to you I'm a good person and I still try to be but it doesn't seem to pay off really I don't try to take my emotions out on people not even you and I'm sorry about the argument the other day but I'm still trying just like you told me to good luck in life emgo may primus guide you!!!!! you too Lori and mascot!!!!!!!!!
So does anyone else get horribly confused over the many, MANY types/grades/etc. of transformers figures that are available? I was looking around Toys-R-Us yesterday and noticed that there are different series (which isn't really confusing) and that there are different grades (skill levels?) of the same figures in the same series'. However, it seems like beyond the beginner figures (1 step, 3 step, etc.) that the packaging doesn't tell what type/grade/etc. the figure actually is (at least if they do I'm missing what it't trying to tell me). Combiner Wars, for example has figures that are smaller scale (roughly four inch figures) and then has figure like the Ultra Magnus that are HUGE by comparison...so are these figures different grades/types within the same series? Rodimus within the Combiner Wars series is really tiny in size compared to Ultra Magnus, and it appears that even in combiner mode with the others that work with Rodimus that he would still be smaller than Magnus who isn't a combiner at all (you'd think a combiner like Devastator would be a bit bigger than Ultra Magnus). Then the Robots in Disguise series also seems to have this going on as well. Is Hasbro's scaling of the figures just all over the place, or are these different "grades" within the same series? I want my Transformers collection to have a little bit of rhyme and reason to the scaling, but I have no clue what the "standard" scaling actually is to start building a collection around.
+Nosrep Suomynona Just wanted to say that I really appreciate the information. Is there a way to actually tell which figures are which class in instances where the packaging doesn't tell you, or do people pretty much just go by how large the figures are? Some figures (like the Transformers Animated Ultra Magnus as an example) doesn't say what "class" it is. I ordered my first figure yesterday after watching several of Emgo's reviews and decided to start with the Generations 2014 Arcee figure. It's in the "Generations Deluxe" section on BigBadToyStore's website... Acree is supposedly on a 5 1/2 inch scale from what I could find on information on the figure. So if "Deluxe" is one tier from the bottom at a 5 1/2 inch scale, would the "Voyager" class figures be too out of scale to display and collect with other "Deluxe" scale figures? The "Deluxe" have a good price range, and I could see myself getting a few "Voyager" class figures as well if they will scale fairly well with each other. I'm pretty much trying to keep things looking fairly faithful in terms of scale so I can display them together, but I want to have as many options as possible while collecting and remaining somewhat within scale. Apologies in advance for a lot of text, and again, huge thanks for answering my previous question.
+Nosrep Suomynona That's what I've been doing so far, watching Emgo's reviews and looking as his size comparisons...also been using his work to try and better educate myself on all the different grades and what said differences are. So I end up binge watching his reviews when I have the time while taking some notes. I got my Arcee in the mail earlier today, and she looks absolutely awesome. Now I just need to get a Kup, Hot Rod, Ultra Magnus, Springer, Blur, and Optimus to go with her. I think my wallet's gonna need a defibrillator real soon. Once again Nosrep Suomynona, big thanks for the reply. Take care of yourself and have a great week.
Yes he was, but it would go against the team's color scheme if Blade was blue. By the way, GCreations did release an alternate G1 version where he is blue.
Al Garabedian I think this set was going more for the G1 toy look. I like the G1 toy looks to an extent because of bumblebee’s face looking absolutely nothing like him unless you bought the reissue.
Emgo... I really enjoy watching these reviews as i'm not capable of buying these guys myself. But for the love of god, would you please stop saying "Heel Spur" ?! A Spur is the thing on the heel of a Cowboy boot, and i assume that is what you're referring to. A Heel Spur however is a painful Medical Condition where a sharp spike extends from the bottom of the Calcaneus (Heel bone). I am of course merely asking, not demanding.
I've been collecting billions of years ago...and haven't stopped. When all these 3rd Party figures are like $100/ea, doesn't the idea of WTF are they using ball-n-socket joints? I'd rather have quality built than articulations. Tired of these cheap- sh*t plastics. If they were quality build with some diecast, I'd pay even more $$$ for them.
Nothing dumber then a combiner that it's hand isn't integrated into its body... Like where they carry it in beast mode.. robot mode.. lame... Ruins the whole damn thing
I love your review, entertaining as always.
His joints aren't squeaky, that is just the sound of the mating cry of the Pterodactyl.
And I think that if Rocket Scientists stuff up, they'll compare themselves to Brain Surgeons.
3:00 you're right it's not rocket science, it's paleontology
i just want to thank you again emgo for what you do i just got my copy (blue version) and wow third party instructions are terrible lol. I couldn't figure out what one part was for and the instructions didnt say your vid showed me it was for the wrist. so once more you saved me man. NEVER stop doing what you do!
Looks Fantastic in all modes! Although that combiner arm mode has G1 Predaking-like elbows...
Can't wait to see the big guy complete!
This swoop + the combine mode sword = an anime character.
his wings are so cool, so shiny detailed and chromed up, they look sharp too
I actually like the looks of this. I'm tempted to collect them myself. Great skit too.
i have to say this is on of the best teradachtile modes Ive seen out of all the 3rd party swoops
pterodactyl is an incorrect term, the correct term is pteranodon or pterosaur
slag is being released in the 2nd quarter of 2016.
They could've added a bit of paint in order to pick out the details. Side note: I know they're more then likely going to come out with the Triceratops (can't remember his name right now, haven't had my tea yet), but who else. At least, if I remember our last conversation, Emgo.
+Joe Thomas slag is the last one. this is a five member combiner
I must've been thinking of the other dinobot combiner. Sorry.
+Joe Thomas the other one is five members too
Then what the heck am I thinking of? Sorry about bothering you with my mistake.
I can't wait for you to actually combine them I really want to see how massive the combiner form is.
hmm.. is it just my sound, or every time you speak and use a loud ratchet on the toy, your voice becomes 'ratcheted' O.o
anyway, this looks like the best swoop i've seen atm :3
which company's masterpiece size dinobot you think is the best? just bought takara tomy's wheeljack, so I'm planning to start collecting dinobots soon
+emgo316 @15:24 , you mentioned that the sword is held oddly by the combiner hands.
I noticed that, too, what with the bar hanging off on the front. These are just some wild guesses, but i'm guessing either the hand is meant to hold the grip like a gun handle or wrapped over the fingers, like you showed in the review. Idk if GCreation noticed this issue yet, but if it does get to where it's a bother, there's always clipping the bar off or GCreation could have their take on Slag come out with an attachment to the sword (most likely a fancy handle with a crossguard).
hey emgo316 do you think they should make a warrior class soundwave?
I LIKE THES SWOOB EVEN IN THE COMBINE MODE
guess you need to use the term "Frunormous" fricken enormous when you get the full combiner set Emgo
nice review EmGo...I really liked it. u r so funny!keep ur geek on. and whens mascot going to review again I cant wait for another mascot review
3:10 Rocket scientists use brain surgeons for comparison
Does this have any die-cast because the body looks like it does? If not that is good metallic paint.
FYI the video freezes, for just a few seconds, at about 9:33. Not a complaint just letting you know
I would think that Blade would actually look weird holding a sword as big as he is. I'm betting if you snip that post off the combined sword, Shuraking would hold it just fine.
when rocket scientists/ physics profs guff up, universes blow up example Rodney McKay stargate Atlantis is a fine example.
+emgo316 have you tried powdered graphite for the squeaky joints?
Man he is blinged OUT MAH DINOBOT
+Emgo316 Now you have 2 Blade figures. But this one is missing his knife and hook.
Once you get Shuraking completed, will you compare him to ToyWorld's Devastator (Constructor)? Finally have it how it should have been, All the Dinos teaming up to kick (or try to kick) Devastator's butt.
How did knock offs become so good? Is it just because they charge a premium over the official stuff?
Do I have to order the replacement feett that match for the combined mode? Mine did not come with reolacement parts.
I just preordered my first Gigapower (Snarl) 2021 reissue. Would you tell me if this Swoop would scale well with it and my Reximus Prime? Looks as if Giga and Reximus would work well together (one less of the team id have to re buy lol) The wings in this really hold attention and was just curious how'd he would work with Gigapower Snarl and my Reximus.
I can't answer that since I don't own the gigapower dinos
@@emgo316 Thank you anyway. It looks like it'd be a close fit. Just figured since I don't care if I have the full team made by the same company, I'd go with my Reximus Prime and buy GCreation Swoop and save some.cash. And the rest of team be Gigapower. Hopefully someone will reply about this. Thanks again.
You will soon need a bigger house. Too many giant Transformers!
emgo316 when will you review warrior class windblade or tell us if you fixed sideswipes joints on his arms with floor polish
+Daniel Martinez I don't know when windblade comes out so I can't answer that and I haven't even tried to fix sideswipe's shoulders lol
What dinobot would you rather be
When are you revewing Stringer the helicopter that drift had a repaint on in AoE?
he reviewed it eons ago
love your videos and i just wish i could be meet you i watch your vids to make me happy i was sad once watched your vids and i was happy you made me laugh and when the video ends i start another one and ive been subbed since 30,000 thank you from your fan Nick
+DeathRider thanks very much! I appreciate it (thumbs up)
+emgo316 hey emgo every think of making a video where you fans can call you on skype and ask you questions?
+DeathRider the thought never crossed my mind, but who knows what I'll do in the future
+emgo316 have little emgos with Lori and call them the teeny geeks!!!!!
+emgo316 very true and if you do tell me cuz i really want to meet you not to sound creepy
im still waiting this line to be complete
They're releasing the last one this month. I don't know about you, but I can't wait for my Shuraking to have a right arm.
Fansproject Grimlock is out, just FYI.
+James Ramirez yeah, got mine on the way
Rocket scientists probably compare stuff to "brain surgery".
Hi Emgo, i noticed that your bots have Autobot logos, where did you get them?
There's Dark Versions of Blade & the other's,
like your videos find them fun to watch will you be continuing the fansproject saurus ryu-oh line
+Rambo yes I will, just waiting for the next figures to be released
Awesome and again I enjoy watching your reviews
sweet jumbilya the combine mode is gonna be one firce looking sucker....don't you need just one more piece and your done?
+Cie Talvon yes
Huh, the transformation is similar to POTP Swoop
Anyone else notice emgo hasn't really pointed out too many misspellings for the Dino-combiners like he does for other reviews, because he hasn't pointed out on the back of the collector cards it's spelled capabiliy not capability
Such a big bird!
Are the wings supposed to do sth in combined mode?
love your vids man
Emgo, just a question about the combiners name. Which sounds like a better name, Shuraking or Extinction?
+fangiresaga they're both fine to me
Fair enough, thought I'd ask, more partial to Extinction myself. Hey to each his own right?
+fangiresaga exactly
+emgo316 oh emgo how I wish I could live a life like yours
where people weren't assholes and people weren't getting on you for having an opinion real life doesn't constantly fall apart no matter how much you try to move on I've tried so hard to move on in life even use you as a good laugh you give me good laughs all the time or at least you used to its not you emgo
in other words emgo hold on to what you have because in the blink of an eye it could all be gone I hope it doesn't you don't deserve that you deserve all the love and possessions given to you I'm a good person and I still try to be but it doesn't seem to pay off really I don't try to take my emotions out on people not even you and I'm sorry about the argument the other day but I'm still trying just like you told me to good luck in life emgo may primus guide you!!!!!
you too Lori and mascot!!!!!!!!!
+emgo316 Did you ever review the Tetra squadron seekers? I dont remember seeing the rereleased version.
Emgo what are your thoughts on Chyna passing away
what's up emgo
swoopy this one is.
Cause it's could be either 5-6 transformers
emgo316 can Grimlock hold the big sword?
you should have shockwave abd megatron do a review
Awesome
Is there like 1 more?
Will you be reviewing DX9's Hulkie?
+ConDucktor Whirl, War Starter and Crate God nope. No interest in it
emgo316
most unfortunate :(
Wait... ... ... no G1 robot mode comparrison?
Good part Emgo, Swoop missed good part ;-)
+Mark Drakan there was a lot of crap on the table. He got lost in the shuffle. It happens
emgo316 No worries fella. Was just a lighthearted comment to use a movie reference :-)
Nice review, looking forward to seeing the completed combiner.
why all of them has a translucent head except for grimlock
+Kurt 9933 Grimlock's G1 toy didn't have a translucent head while the others did. They're meant to be like the G1 toys.
no sad pacman?
So does anyone else get horribly confused over the many, MANY types/grades/etc. of transformers figures that are available? I was looking around Toys-R-Us yesterday and noticed that there are different series (which isn't really confusing) and that there are different grades (skill levels?) of the same figures in the same series'. However, it seems like beyond the beginner figures (1 step, 3 step, etc.) that the packaging doesn't tell what type/grade/etc. the figure actually is (at least if they do I'm missing what it't trying to tell me). Combiner Wars, for example has figures that are smaller scale (roughly four inch figures) and then has figure like the Ultra Magnus that are HUGE by comparison...so are these figures different grades/types within the same series? Rodimus within the Combiner Wars series is really tiny in size compared to Ultra Magnus, and it appears that even in combiner mode with the others that work with Rodimus that he would still be smaller than Magnus who isn't a combiner at all (you'd think a combiner like Devastator would be a bit bigger than Ultra Magnus). Then the Robots in Disguise series also seems to have this going on as well. Is Hasbro's scaling of the figures just all over the place, or are these different "grades" within the same series? I want my Transformers collection to have a little bit of rhyme and reason to the scaling, but I have no clue what the "standard" scaling actually is to start building a collection around.
+Nosrep Suomynona Just wanted to say that I really appreciate the information. Is there a way to actually tell which figures are which class in instances where the packaging doesn't tell you, or do people pretty much just go by how large the figures are? Some figures (like the Transformers Animated Ultra Magnus as an example) doesn't say what "class" it is. I ordered my first figure yesterday after watching several of Emgo's reviews and decided to start with the Generations 2014 Arcee figure. It's in the "Generations Deluxe" section on BigBadToyStore's website...
Acree is supposedly on a 5 1/2 inch scale from what I could find on information on the figure. So if "Deluxe" is one tier from the bottom at a 5 1/2 inch scale, would the "Voyager" class figures be too out of scale to display and collect with other "Deluxe" scale figures? The "Deluxe" have a good price range, and I could see myself getting a few "Voyager" class figures as well if they will scale fairly well with each other. I'm pretty much trying to keep things looking fairly faithful in terms of scale so I can display them together, but I want to have as many options as possible while collecting and remaining somewhat within scale.
Apologies in advance for a lot of text, and again, huge thanks for answering my previous question.
+Nosrep Suomynona That's what I've been doing so far, watching Emgo's reviews and looking as his size comparisons...also been using his work to try and better educate myself on all the different grades and what said differences are. So I end up binge watching his reviews when I have the time while taking some notes.
I got my Arcee in the mail earlier today, and she looks absolutely awesome. Now I just need to get a Kup, Hot Rod, Ultra Magnus, Springer, Blur, and Optimus to go with her.
I think my wallet's gonna need a defibrillator real soon.
Once again Nosrep Suomynona, big thanks for the reply. Take care of yourself and have a great week.
This figure is definitely NOT shelf friendly lol
He doesn't look anything like a vampire slayer to me.
BIIIIRRRDDD!
esta genial !
maybe the extra rubber pieces r for the other foot
Yes, the rubber pieces are for both feet
do a mascot video
so I decided I wanted the ring of honor TV belt
good lord blade can echo locate. *squeak squeak*
I reckon rocket scientists compare it to brain surgery, and vice versa.
it going loss up just keep moving join around give next year and the sound will go a away lol
I thought you said that you were done with this line up...
+Nico I'm done with the toyworld dinos. this is the set I decided to go with
emgo316 Ohh... ok2
+emgo316
so what turn you off on toyworld? I kinda like the design they going for
+XenoGundian I just didn't like the way the combined mode looked.
eh, to each their own, XD
5:54 tail *pycnofibres
Squekytronimus
no its not but i am really good at it the first rocket got to the moon and back not i made something that went farther than pluto
You're still linking your emgames channel in the description.
+Sean Bateman (blobord) yes I am
emgo316 That was rather blunt XD
+Sean Bateman (blobord) what were you expecting?
emgo316 A pencil sharpener?
+Sean Bateman (blobord) k
try some one step changers
pleas
whatever happened to that dinobot combiner???
+Adam Henson this is part of that Dinobot combiner
Sorry dude
+emgo316 but the beast was too... which one is in question
squeaky nightmares
They did a poor job sizing Snarl and Sludge to this team.
+BayushiGemma well they have to scale things accordingly so the combined mode will be well proportioned
poor megatron
Am I the only one that sees the r missing in the word strength on the cards?
niceeeee cool..!!!
wasn't swoop blue in g1?
Yes he was, but it would go against the team's color scheme if Blade was blue. By the way, GCreations did release an alternate G1 version where he is blue.
Al Garabedian I think this set was going more for the G1 toy look. I like the G1 toy looks to an extent because of bumblebee’s face looking absolutely nothing like him unless you bought the reissue.
very much
Does this set have a slag?
+Ben Ulrand yes it does
+emgo316 excellent
You are missing one
+Dragon Soul yeah, one more to go. can't wait.
Emgo... I really enjoy watching these reviews as i'm not capable of buying these guys myself.
But for the love of god, would you please stop saying "Heel Spur" ?!
A Spur is the thing on the heel of a Cowboy boot, and i assume that is what you're referring to.
A Heel Spur however is a painful Medical Condition where a sharp spike extends from the bottom of the Calcaneus (Heel bone).
I am of course merely asking, not demanding.
This swoop is the wrong color for me.
who is funny you or mascot
. do rocket science stressful
I've been collecting billions of years ago...and haven't stopped. When all these 3rd Party figures are like $100/ea, doesn't the idea of WTF are they using ball-n-socket joints? I'd rather have quality built than articulations. Tired of these cheap- sh*t plastics. If they were quality build with some diecast, I'd pay even more $$$ for them.
Forget pledge blade needs w d 40 O_0
sicenctis are dipsticks
sqweaky!!!!!!!!
Nothing dumber then a combiner that it's hand isn't integrated into its body... Like where they carry it in beast mode.. robot mode.. lame... Ruins the whole damn thing