Really nice boxes! Looks so extremely nice with all the screws and bits you store inside of them. Just awesome! And the music on the video is just amazing ❤
Супер проект. Вот только задумался над верхней крышкой, надо будет ее сделать с замком. В случае опрокидования, верхняя крышка легко слетает и мелочь розсипается.
@@V.Perinski Oh I definitely have some ideas, I was even more motivated when I saw you use bike spokes, I salvaged two wheels, and realized I have more than enough bike spokes to last me a while.
Please put a generous fillet in one of the bottom edges of each cubby hole. This makes is so much easier to get the last few small items out by hand, especially small things like hex nuts, beads, etc.
I use these boxes for small nuts, screws, and other tiny items. So, I mainly use tweezers to retrieve them. Additionally, I provided the files in STEP format. You can modify them in any CAD software as you see fit. I’ve already answered this question multiple times, both in private messages and publicly. But I’ll say it again: making changes would require more plastic, longer print times, and so on. So, if you want to do that, do it yourself. I’m perfectly satisfied with these boxes. I made them for myself and just shared them with everyone. But honestly, I won’t be making any changes to them. Sorry.
Not quite the right question to ask. Depends on the printer/plastic/section . When I printed (Creality K1) white sections, they are 22mm high, plastic for high speed printing fill rate 300mm/sec, one section was printed for about +/- 2:20 hours. A different plastic/printer/settings - will give different results, and very different. For example from 2 to 4 hours and that is very approximate
go.like-it.link/ENXk9 It's ABS Taro-Purple, but it's sensitive to overheating. The color is not stable. There's a color eSUN Upgraded ePLA-Matte Lilak go.like-it.link/ko94M
This is a nail polishing brush. It removes lint if the retraction is not properly adjusted. And it doesn't leave any residue on the surface of the plastic.
Really nice boxes! Looks so extremely nice with all the screws and bits you store inside of them. Just awesome! And the music on the video is just amazing ❤
Супер проект. Вот только задумался над верхней крышкой, надо будет ее сделать с замком. В случае опрокидования, верхняя крышка легко слетает и мелочь розсипается.
@@vlad_romanenko верхняя секция - это временный лоток для сбора мелочевки, как правило пустой
Oh yeah I remember seeing this for a moment in a recent video. Awesome to see them in use! Great video!
But you can download and print, there are 50 different partition and height combinations out there
@@V.Perinski Oh I definitely have some ideas, I was even more motivated when I saw you use bike spokes, I salvaged two wheels, and realized I have more than enough bike spokes to last me a while.
@@lolslim690 I've always used bicycle spokes in boxes, and I've shown this all the time in other videos with boxes :)
Looks fancy and well built but I imagine someone selecting the wrong tab and drooping everything on the floor
Please put a generous fillet in one of the bottom edges of each cubby hole. This makes is so much easier to get the last few small items out by hand, especially small things like hex nuts, beads, etc.
I use these boxes for small nuts, screws, and other tiny items. So, I mainly use tweezers to retrieve them. Additionally, I provided the files in STEP format. You can modify them in any CAD software as you see fit. I’ve already answered this question multiple times, both in private messages and publicly. But I’ll say it again: making changes would require more plastic, longer print times, and so on. So, if you want to do that, do it yourself. I’m perfectly satisfied with these boxes. I made them for myself and just shared them with everyone. But honestly, I won’t be making any changes to them. Sorry.
Love the boxes. What diameter on the pins did you use for the locks?
2mm
Замечательно! как всегда!Всё продумано!
Кроссота! Базару - нет! Стильно и практично! ))
Ура! Дождались 😊
Очередной стопудовый проект в свою копилку.
Print settings?
I got minimum 2 hours print ffor one tray. Max was 8-16h. Ender-3, cura.
its too much. What settings to use to maximize speed?
Not quite the right question to ask. Depends on the printer/plastic/section . When I printed (Creality K1) white sections, they are 22mm high, plastic for high speed printing fill rate 300mm/sec, one section was printed for about +/- 2:20 hours. A different plastic/printer/settings - will give different results, and very different. For example from 2 to 4 hours and that is very approximate
Sorry to be a bother! 1:09 what filament brand, type, and color are you using for the latches? I like that color!
go.like-it.link/ENXk9 It's ABS Taro-Purple, but it's sensitive to overheating. The color is not stable.
There's a color eSUN Upgraded ePLA-Matte Lilak go.like-it.link/ko94M
@@V.Perinski thank you very much, before I asked I also thought it would be lilac! I guessed correctly, again, thanks!
Cool. Have you checked out the Gridfinity system? I use it for horizontal storage and Multiboard for vertical storage.
I don't know what you're talking about, what is Gridfinity?
Oh, I got it, found it on Google… Grid plus infinity = Gridfinity.
at 2:17 is that nylon bristles? Has it worked well for your use or do you wish the bristles were less soft?
This is a nail polishing brush. It removes lint if the retraction is not properly adjusted. And it doesn't leave any residue on the surface of the plastic.