Thank you for the video! I don't usually leave comments for videos, but I think it is so good and clearly explained that you deserve to know that you did a good job.
1. Micro rc car 2. Keychain 3. Tiny led cube with 8x8 matrix on 6 faces and driver ,battery and this controller incide. 4. If that is expencive.then oled disply(0.96inch) back side this controller, thin and slim body 5. May be it can be smart watch with RGB OLED display.connect phone through wifi etc 6.i don't know how that center chip is attached to pcb if it can be removed then it would be much more small size controller
Thanks for making the microcontoller available in your website at a very reasonable price. Plan on getting a bunch. Could you please share the Rainmaker code for controlling 2 relays with a Seedstudio ESP32? It'd be great if it could also remember the relay's power state using EPROM and handle 2 pushbuttons (ezbutton) for offline control.
This is truly amazing board. Try working with sim800l + esp C3 board and control relay using esp rain maker(is it possible 🤔 with rainmaker without wifi?) If yes kindly do the project.if no,give an alternative
how we will know the battery charge status....i mean how much capacity battery has been charged or how much charge is left?is there any particular pin to read the battery charge value?
Thanks for the video! Making a breakout dev board that the C3 would snap into would be cool. Maybe using pogo-pins to make connection with all the solder pads, including those on the back side for battery connection. Would love to see if you have solutions for this quick solderless connection to a dev board.
I am puzzled. How to use BLE to connect to windows? Device is discoverable by Android but neither my laptop nor desktop with 5.4 bt dongle cannot even discover the device?? Any suggestion
Single core and sub-500 KB of RAM make it a little too underpowered for my project, but the XIAO ESP32-S3 is a noteworthy jump in specs for just a $2.50 bump in price.
G'day I am wondering if it can do Speech to Text, and how small can it really get? I saw the XIAO Esp32 being tiny. I have a project that requires wireless, real-time Speech to Text capabilities, and 4 programmable buttons on it... in the smallest form factor possible... Max one index finger size. Do you reckon it can be done with Esp32's or am I better off looking somewhere else? what would you suggest?
Please share the esp32c3 rainmaker relay code shown in the video. It not available on the techiesms website, nor on the github. I tried to type the most code from the video. But there is error in my typing. Thanks.
Nice work bro ,but your not replying comment as I have some problem while programming esp32 board, in ur last project I have click Buying link you have given below showing our of stock. Kya yaar
Thank you for the video! One question please: Which charging circuit is on board? I'd like to make sure my battery will be treated properly :) Thank you!
hello iam trying to make a gps speedo for my bike i have a raspberry pi pico and a ttgo esp s3 and a v1 i also have a ultimate gps break out borad i trying to learn how to wier it up to one thess borads or shuld i get a new borad
Disappointed with the Xiao ESP32-C3's battery performance. The device operates in a voltage range of 4.2V-3.4V, which seems to limit battery usage efficiency. It's frustrating to see shorter usage times due to this. Hope they consider widening the voltage range to make the most of the battery's capacity without harming its longevity
i have a question im new to these and would like to run a small 5v led on it that just flashes how can i do this as the voltage is to low to run the 5v 3 leds iv got
hey..i have done everything ..every steps ..still the port is not connected showing..im using mobile usb cable and my every components and cable is working....plzzz help me..i have texted you on whatsapp and even called you...your team is not helping me
Hi, bro needs some help on my project. I'm using the Wemose D1 mini with a 4channel relay module, on ESP-Home. everything works great only problem is on Booting or restarting the esp, esp making the relay module turn ON in a fraction of a second it is turning off ( triggering ON and OFF) after that everything works fine. Only I restart or boot the esp problem occur. how to prevent triggering the relay when esp boot or restart.
ehh you think that's great, I like it, please differentiate yourself from the other slurred ones and practice speaking clearly, just break your teeth and listen to yourself, you can do it :-)
Thank you for the video! I don't usually leave comments for videos, but I think it is so good and clearly explained that you deserve to know that you did a good job.
Thanks for dropping down the comment
It matters….
Iam from egypt.. thank for you ❤
You're welcome 😊
1. Micro rc car
2. Keychain
3. Tiny led cube with 8x8 matrix on 6 faces and driver ,battery and this controller incide.
4. If that is expencive.then oled disply(0.96inch) back side this controller, thin and slim body
5. May be it can be smart watch with RGB OLED display.connect phone through wifi etc
6.i don't know how that center chip is attached to pcb if it can be removed then it would be much more small size controller
This Guy Is just Amazing 👍☺️
Can anyone tell me if I can upload WLED software in this module?
Will it work properly?
your energy is infectious!
It shows ESP32S3 in the ports menu, because both chips use the same USB VID/PID and the S3 is further up in the menu.
Thanks for making the microcontoller available in your website at a very reasonable price. Plan on getting a bunch. Could you please share the Rainmaker code for controlling 2 relays with a Seedstudio ESP32? It'd be great if it could also remember the relay's power state using EPROM and handle 2 pushbuttons (ezbutton) for offline control.
This is truly amazing board. Try working with sim800l + esp C3 board and control relay using esp rain maker(is it possible 🤔 with rainmaker without wifi?) If yes kindly do the project.if no,give an alternative
Thank you for the great overview!!
how we will know the battery charge status....i mean how much capacity battery has been charged or how much charge is left?is there any particular pin to read the battery charge value?
Great Video, do you know the Blue Tooth range, is it possible to lower the power so that it only connects up to a distance of 1 meter?
Nice Video. What battery did you use?
I am from Indonesia 👍👍👍
me, too
Can you control this board from other network?? I mean from anywhere??
Thanks for the video! Making a breakout dev board that the C3 would snap into would be cool. Maybe using pogo-pins to make connection with all the solder pads, including those on the back side for battery connection. Would love to see if you have solutions for this quick solderless connection to a dev board.
Nice, thanks bud.
Nice Concept! As Always! I Like it! GG A big fan of yours :)
Glad to hear that you liked it 😊
@@techiesms 😀 :) I like your channel.
Can we do make Home Automation Project using Xiao ESP32 C3 ?
can we get the code for "Testing with esp rainmaker platform" ?
Can you also charge the board through 3.3V pin ? Or it can only be charged if plugged at the back at Bat+ and Bat- ?
Start some drone projects dude🤩.... We are waiting 🤗
Can you compare XIAO ESP32 C3 and ESP32 C3 SuperMini
I am puzzled. How to use BLE to connect to windows? Device is discoverable by Android but neither my laptop nor desktop with 5.4 bt dongle cannot even discover the device?? Any suggestion
How does relay work? Is it only an app?
Single core and sub-500 KB of RAM make it a little too underpowered for my project, but the XIAO ESP32-S3 is a noteworthy jump in specs for just a $2.50 bump in price.
Does ESPNOW work? Does deep sleep work? Does it consume less electricity than dev board?
ESPNOW will work(not tested though)
Deep sleep current 44uA
G'day I am wondering if it can do Speech to Text, and how small can it really get? I saw the XIAO Esp32 being tiny.
I have a project that requires wireless, real-time Speech to Text capabilities, and 4 programmable buttons on it... in the smallest form factor possible... Max one index finger size.
Do you reckon it can be done with Esp32's or am I better off looking somewhere else?
what would you suggest?
What was the app that you used to control the LED ? Also, what did you use to integrate Alexa with the LED??
that's so amazing!
Please share the esp32c3 rainmaker relay code shown in the video. It not available on the techiesms website, nor on the github. I tried to type the most code from the video. But there is error in my typing. Thanks.
Sir how to make LAN to wifi converter using ESP32 and enc28j60?
Nice work bro ,but your not replying comment as I have some problem while programming esp32 board, in ur last project I have click
Buying link you have given below showing our of stock. Kya yaar
Does it work with ESPHOME ?
Can I use it as BMS for battery charging
wonderful job how did you make the integration with Google assistance and Alexa, any reference?
Using ESP Rainmaker
Watch out this video to know more
ruclips.net/video/651EoGQHWck/видео.html
Thank you for the video! One question please: Which charging circuit is on board? I'd like to make sure my battery will be treated properly :)
Thank you!
My Boss... When will you start contents of coding Arduino and Esp using VS code?? Any plans for it? 😁😁
No plans for VS code as of now
@@techiesms ok may be just setting the environment and introduction video would be cool
@@techiesms thnks alot
@@techiesms sir please, with platformio just once...
Plz send link for any Indian site,to purchase this
Good video bro thanks 👍
What kind of battery and capacity is supported
Lol wat
hello iam trying to make a gps speedo for my bike i have a raspberry pi pico and a ttgo esp s3 and a v1 i also have a ultimate gps break out borad i trying to learn how to wier it up to one thess borads or shuld i get a new borad
Sir Make next Video on, Build Your Own Google Home + Alexa Smart Speaker
Sir is it possible to use esp rainmaker with nodemcu 12e
Hi I need few of these boards, kindly provide 10-20 nos. If possible
Thanks
Sorry sir
Currently out of stock
Please follow us on Instagram to stay updated with the stock
Hey do you have any suggestions for an open source board for learning Linux and also using it as an media center!? Not raspberry.
Awesome.sir please make a video on esp32 squeezelite.
What’s that?
Consider sharing demo codes for the examples shown: Alexa and Google Assistant x
It was just the example code of ESP Rainmaker
Disappointed with the Xiao ESP32-C3's battery performance. The device operates in a voltage range of 4.2V-3.4V, which seems to limit battery usage efficiency. It's frustrating to see shorter usage times due to this. Hope they consider widening the voltage range to make the most of the battery's capacity without harming its longevity
i have a question im new to these and would like to run a small 5v led on it that just flashes how can i do this as the voltage is to low to run the 5v 3 leds iv got
You need transjister like bc547 to use 5v led
Can esp32c3 super mini support on blynk
Add free shipping option for orders above certain amount
Our margins are already low
So can’t offer that free shipping
But still in bulk orders we may provide it.
@@techiesms This was just a suggestion. Take it or leave it. No problem.
Anyone know if this these work with Home Assistant? So many sensor projects with this thing
Hi bro, I want plz esp 32 device the code is upload but not working the device
Hello Sir, do you have experience with OTA for this board?
I haven’t try that
But it will surely work on this
@@techiesms thank you. Perhaps for next project I will use such small board.
hey..i have done everything ..every steps ..still the port is not connected showing..im using mobile usb cable and my every components and cable is working....plzzz help me..i have texted you on whatsapp and even called you...your team is not helping me
sir a hackathon by techiesms, on electronics...
Can you make a smart RF remote (4relay control and momentary function) and smart IR blaster.
Excellent project 👌
Thank you 😊
Hello, with respect
Where can I download the relevant firmware for use in thonny Ide?
where is the link for blynk sketch?
This board is out of stock every where in India, can someone please help me to find from where I can get this, thanks
It will take around 2 months to get back in stock
Hi, bro needs some help on my project. I'm using the Wemose D1 mini with a 4channel relay module, on ESP-Home. everything works great only problem is on Booting or restarting the esp, esp making the relay module turn ON in a fraction of a second it is turning off ( triggering ON and OFF) after that everything works fine. Only I restart or boot the esp problem occur. how to prevent triggering the relay when esp boot or restart.
Use another GPIO
@@imdhemant i'm using 4 gpio pins ( D5, D6, D7, D2 ) all of then doing the same
can we run micropython on this. especially with the wifi connectivity ?
Yes
Great and awesome
Hi bro can try doing projects with Nordic thingy 53
Awesome 👍👍👍
Any ideas how to use external (button) interrupt on this board?
English with spicy hindi👍🏻👍🏻👍🏻
whats the range of the wifi if you dont connect a antenna? does it work in 3m distance?
I think it will work for 3m range
Does it deliver with customs clearance?
It was delivered to me via DHL. I thought I need to pay the duty. But they didn’t ask me for any import duty.
My boss can you make a video on increasing the GPIO pins of any esp development boards
Which each extended GPIO pins can be individually controlled😌😌😌
Better use one microcontroller along with the ESP, so u will get extra io/pins and use serial communication with ESP
The smallest is esp32-01m or 01d.
what happened to the githubusercontent link?
Video suspended after 1 minute head banging and self-portrait.
I like esp32 because it has bluetooth and Wi-Fi unlike arduino
HI Why your WEBSITE is not working
It's working now...
Hello, Do you konw if there is a pin dedicated to control the deep sleep wakeup using ext0 command? Thanks for the video
Please make wifi jammer with this project in the next video
Just install wifi deauther. Its the same in all boards. Nothing new.
Please tell me it works with esphome and home assistant 😭
Yes
Nice bro
Thank you 😊
Added the pins in this mode
What?
This board
How do I order this board ??
The link is in the description
Hi sir
Can we transfer audio and video from one esp32 to another esp 32 through esp now protocol
just ordered 2
Wow
Happy making 🙌🏻
link to buy in india :)
Coming soon…
I’ll share its purchase link from techiesms website
Hindi me videos kab aayega
Bhai thoda thoda to hindi bolna start kiya h video me
Charging current
Max 100mA
What is this ant 😂😂❤️❤️
That ant has some super powers...
@@techiesmsAwesome, it's very interesting 🙌🏽
0:54
To much noise too little substance.
Intrrosting!
Khushi hui aapko hindi bolte suna. Aap hindi bol lete hain to vdo hindi me kyon nahi banate bahot se logon ko seekh sakte hain.
Try Karunga thoda Hindi mix krne ka
Hindi
Yaar hindi me bnaya kr bhai
🖖😎👍🇧🇷
ehh you think that's great, I like it, please differentiate yourself from the other slurred ones and practice speaking clearly, just break your teeth and listen to yourself, you can do it :-)
Can you control this board from other network?? I mean from anywhere else??
Does it work with ESPHOME?