halturnerradioshow.com/index.php/en/news-page/news-nation/ominous-u-s-positioning-naval-vessels-off-east-west-coasts-massive-troop-movements-in-conus 🔴🔴🔴❗️❗️❗️🔴🔴🔴Nation OMINOUS: U.S. POSITIONING NAVAL VESSELS OFF EAST & WEST COASTS; MASSIVE TROOP MOVEMENTS IN CONUS NATION HAL TURNER 08 DECEMBER 2020 HITS: 635629 OMINOUS: U.S. POSITIONING NAVAL VESSELS OFF EAST & WEST COASTS; MASSIVE TROOP MOVEMENTS IN CONUS Over the past four days, there have been MASSIVE movements of troops, equipment and supplies WITHIN the continental United States (CONUS). Today (Tue.), the US Navy is positioning Aircraft carriers and their strike groups off both the US east and west coasts. It appears we are preparing to defend ourselves from an invasion. China? Late Saturday, no fewer than 25 C-17 aircraft were in the skies over the USA, carrying troops and equipment from around the nation . . . ALL going to Nellis Air Force Base. (Story Here). Also late Saturday, no fewer than 12 C-130 aircraft were also on the move, ALSO ALL heading into Nellis. MAP On Sunday, locals on and around Nellis reported the base was "swarming" with soldiers and Marines. They also reported seeing a vast array of land fighting vehicles coming out of cargo aircraft. (Article continues beneath Ad) Ad Ads by Revcontent Koblenz - Das 250€ Bitcoin-investition Macht Die Menschen Reich ONLINE-NACHRICHTEN So Können Sie in Nur 4 Tagen 11.571€ Verdienen! ONLINE-NACHRICHTEN NAVAL DEPLOYMENTS This morning, according the the US Naval Institute, the Navy has deployed THREE (3) Aircraft Carriers, plus a Landing Helicopter Dock (LHD) off the US West Coast, and TWO (2) Aircraft carriers and their Strike Groups plus another LHD off the US East Coast. Off the West Coast is the USS Carl Vinson in the Pacific (NOT AT PORT) along the Oregon/Washington Border, the USS Essex (LHD) off the coast of San Francisco, and the USS Theodore Roosevelt and its Strike Group off the coast of Los Angeles . . . Off the East Coast are the USS Dwight D. Eisenhower off the Coast of Connecticut, the USS Gerald R. Ford off the coast of New Jersey, and the USS Iwo Jima off the coast of South Carolina . . . The map below lays out the approximate location of the vessels: Given these new naval deployments, and the very large, sudden, movement of troops into Nellis AFB, one gets the impression that the United States is preparing to defend its homeland from actual invasion. Hint: That may actually be the case. Word in Intelligence circles says that if the Supreme Court voids any or all of the November 3 election due to the massive fraud and violations of the US Constitution with changes to election laws, the lawless extension of voting for weeks, in violation of 3 USC 1 & 2, the Democrats are planning on asking the United Nations to INVADE to depose Trump as a "Dictator." There is also word within Intelligence circles that the states of California, Oregon, and Washington, plus New York, might actually try to secede from the Union if Trump gets four more years, and may need to be forcibly brought back under US control, the same way renegade southern states were handled back in the 1860's Civil War." (HT Note: It would gladden my heart to see the US military bombing egomaniac Governor Andrew Cuomo and filthy Commie NYC Mayor Bill DeBlasio back into the Union . . . or to Kingdom come . . .) China and Russia are deploying their naval assets in such a way that transit to the US would not take long! China is positioning out in the Pacific. Just this morning, the British revealed they have been tracking "the entire Russian Northern Fleet" off the British Coast this month, as the Russians head out into the North Atlantic for . . . . something. (Story HERE) One possibility is they are heading toward the Mediterranean to deal with Syria and perhaps Turkey. But what if they're **NOT** going into the Mediterranean? What if they're positioning out in the Atlantic to arrive as "requested" along the US East Coast? It sounds corny, but we won't know until we know and that will be a few days. Stay tuned folks. We're seeing history unfolding. As a precaution, we remind you that your firearms need cleaning and oiling; especially if you haven't used them in awhile. They collect dust, develop surface rust in the barrel. Now might be a good time to take them out, clean them, oil them, and make sure they are in pristine condition. Don't want any jamming or misfires if we suddenly find ourselves having to shoot and kill invading foreign troops, invited here by Traitors . . . who would also have to be shot and killed. UPDATE 12:03 AM EST WEDNESDAY, 9 DECEMBER -- Attorney Lin Wood, who is known to be working closely with President Trump concerning the theft of the November 3 Election by crooked Democrats, posted __this__ interesting item on his Twitter feed. Related??? Might Lin Wood know something thanks to his work with our President? MORE: It seems that China has been snapping-up every Barrel of Oil it can get its hands on; far in excess of what it normally consumes. Storing-up because they intend to wage war, perhaps? Story Here SHOW NOTE: I will be UPDATING this information with all the latest on my radio show tonight at 9:00PM Eastern US time. Tune-in LIVE either via radio or Internet as shown below: Regular AM: KYAH-540-AM Utah Shortwave: WBCQ on both 7.490 and 6.160 AM WRMI on 9.455 AM Internet: (Does not go LIVE until about one hour before the show begins. During that hour, the link streams commercial-free music until the show starts) stream.halturnerradioshow.com:8000/ MAKE SURE YOU TUNE-IN FOR ALL THE LATEST INFO! Now that you have read this story, please COVER THE COST for what your visit cost this site by clicking one or more of the ads below which generates Advertiser revenue of two to three cents per click - no purchase necessary by you -- and helps offset operating costs for this web site. When YOU read a story here, the web hosting company charges us for "data transfer / Bandwidth" to convey the material to you. Without your help by clicking an ad below, this web site would be in danger of shut down from the data transfer charges. Please click any ad below to offset the cost of bringing this news to you
This is going to be my dads fathers day present. I'm a senior in hs so I'm going to take 2-3 extra days waiting tables this summer for this awesome knife
Lack of a hand guard is a common problem with modern "tactical" blades I find. I don't understand why so many makers are avoiding hand guards in their designs, it makes no sense to me.
I do think the design is great. Very functional and really aesthetically pleasing. I wish I had a better experience with Toor knives in the past but that’s the way it goes in the industry
I really like this. I have been looking for an EDC fixed fighter that still could be used in a survival situation. And I love that the serrated edge is NOT on the cutting edge, and that it looks like you have a 90° spine for ferro rod. This might have just made up my mind. Nice work!!!
This knife is AWESOME !! Worth every penny, perfect EDC, the Ranger green is a really great color, I love the collaboration, and the sheath with the ULTI-clip really makes the knife . Thank you TOOR great job ! After using it until it was dull which took a long time I sharpened it so scary sharp it is AWESOME to sharpen I really like the steel it’s made of! I got this knife four months ago, and I am so impressed it is so useful! The Serrations are total Awesome for cutting cardboard . I can’t believe how sharp I get it. It is very sharp and a great slicer my very favorite knife that I EDC the most! Thank you TOOR and Haley strategic outstanding job UPDATE : I put a TEK-LOK on it , and I really like it. Made in USA just like the blade
Looking at purchasing this.. only finding available on Midway USA. Biggest concern is does all options of this knife come with the training blade? I’ve watched numerous unboxing videos that don’t come with the training blade?
Looks pretty tight to me Travis. Seems like maybe 1-1.5" might be a bit better but I can understand you wanting to keep it reasonable for EDC use. Nice job!
It's all in how it's used. Best knives I've had in "all kinds of environments" for all sorts of "tasks", were simple and not necessarily expensive; rarely over $100.
I’m really sick and tired of this industry overpricing the hell out of everything. IDC what anyone says. No knife should be worth as much as a rifle or pistol.
The technology and thought put into this knife is well worth the price. I have many well over this price and they are not as thought out as this. Let's encompass everything that goes into this knife people. Definitely worth more than 200 dollars... Great job Toor and Haley. Will be buying one. Keep up the great work. Its appreciated. 🤙👊
What the hell is the purpose of having a training blade if it doesn’t even fit in the sheath? Am I missing something here? Drawing the weapon is one of the most crucial parts. Please advise because I just spent money on this blade for the purpose of having a trainer that will fit in the same sheath. The knife btw is amazing. Love it. Just pissed I can’t draw the trainer.
Funny you mention this. I bought a Ronin Tactics Sakura blade with trainer included and actually jacked up my trainer shoving it in the sheath the first time. I was super confused like why does this not fit? It kinda pissed me off too. Not ALL companies do that, but I guess some do. Not sure why though? That being said I Still love the Sakura and these knives look great so haha it is what it is I suppose. But something to think about Toor!
@@tedcarl5382 Not even close to market price. I could get a bark river that's actually designed by someone who knows what they're doing for less than these. Or a TOPS...or an ESEE....the list goes on and on. 400 dollars for a carbon steel fixed blade from a company nobody has ever heard of, and is known for QC issues... This is a 150 dollar knife with a 250 Haley Strategic logo on it.
Ill stand by The “market price” comment - If the price ain’t listed, you can’t afford it. Whether it’s a proper deal or not, is another matter, of which I’m not educated enough on. I’m a simple man with simple tools and high speed low drag ain’t in my wheelhouse.
lol real shit, 99% of my knife usage is either A:cutting open food stuff, or B:opening boxes.... but goddamit i want it to be a cool as knife built for the apocalypse
Hopefully one day I can afford to pick one up I have several haily products they are as bad ass as he is my main go to rifle has the haily inforce on it and it takes a beating
@0:19 It'd be nice if you could ditch the fancy packaging and drop the price by a few shekels. Good looking knife though. I've been EDCing a Benchmade Fixed Infidel for a couple years now, and this appears to be of a similar size but with a lot more utility.
Premium steel that isn't cheap, labor, G10 isn't cheap, It isn't 99% CNC machining. The CNC is only used to cut the blade shape, everything else is done by hand. Using a CNC machine enables them to make production quality and quantity. Dimensions stay exact, tolerances stay exact.
A beauty, and I love the double edge aspect. Slightly too big for tactical EDC, at least for me. Considering the Krypteia, but I just bought 3 other EDC tactical fixed blades. ProTech Rockeye, T. Kell Combatant, and The new SOG Pentagon. Damn it, I like this one though. Shit...
Anyone know how to insert these friction offset pads? Can’t seem to see a way other than opening the entire holster which seems like a bad idea. Would appreciate any advice!
During Trump, that $400 could buy you an entire AR. I'm just using walmart knives and they have stood up for over a decade without chipping so far. The knife does look slick though.
$400?? That’s a tad over priced and this is a poking knife not a multipurpose knife. Unfortunately this would be 4-5th on my list of options to take with me anywhere. The only group of people I see using this design are door kickers.
Perfect, what else could one possibly need during the times were in, where ammo is almost exclusively available to the rich only? A stamped steel knife for $400 dollars. Nice dude
I’ve been told by a few ppl to stay away from Toor. Was told the cs wasn’t good to say the least and different issues with knives themselves. Also the one I hated most was someone was still charged the restock fee when his knife he received had areas where the tan was already worn off when he had just opened it. Beautiful knives in my opinion. But I’ve been told a lot of bad about this company and they are still a new company.
I'm not so badass I need a dedicated fighting knife. I do keep an esse5 on my PC via knifehook but mostly for utility and "survival" tasks. These look cool to be sure but I don't match it's level of cool guy
If I could I would if only to support Veteran owned/operated companies. Unfortunately, my 8 yr. old is also my accountant and has absolute control over my finances. I want a Sig 320 compact RXP for my but a skateboard and pads are apparently MY priority according to Mr. Dominic,.....thats my accountants name.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
AVAILABLE HERE AT 5PM PST:
haleystrategic.com/limited/the-darter
toorknives.com/collections/darter
You truly have no idea how hard I laughed @ 5:50
😂@5.50 food fight
ruclips.net/video/7CPsZ1PUCb0/видео.html
Travis, is this you at 1:42 in the linked video
halturnerradioshow.com/index.php/en/news-page/news-nation/ominous-u-s-positioning-naval-vessels-off-east-west-coasts-massive-troop-movements-in-conus 🔴🔴🔴❗️❗️❗️🔴🔴🔴Nation OMINOUS: U.S. POSITIONING NAVAL VESSELS OFF EAST & WEST COASTS; MASSIVE TROOP MOVEMENTS IN CONUS NATION HAL TURNER 08 DECEMBER 2020 HITS: 635629 OMINOUS: U.S. POSITIONING NAVAL VESSELS OFF EAST & WEST COASTS; MASSIVE TROOP MOVEMENTS IN CONUS Over the past four days, there have been MASSIVE movements of troops, equipment and supplies WITHIN the continental United States (CONUS). Today (Tue.), the US Navy is positioning Aircraft carriers and their strike groups off both the US east and west coasts. It appears we are preparing to defend ourselves from an invasion. China? Late Saturday, no fewer than 25 C-17 aircraft were in the skies over the USA, carrying troops and equipment from around the nation . . . ALL going to Nellis Air Force Base. (Story Here). Also late Saturday, no fewer than 12 C-130 aircraft were also on the move, ALSO ALL heading into Nellis. MAP On Sunday, locals on and around Nellis reported the base was "swarming" with soldiers and Marines. They also reported seeing a vast array of land fighting vehicles coming out of cargo aircraft. (Article continues beneath Ad) Ad Ads by Revcontent Koblenz - Das 250€ Bitcoin-investition Macht Die Menschen Reich ONLINE-NACHRICHTEN So Können Sie in Nur 4 Tagen 11.571€ Verdienen! ONLINE-NACHRICHTEN NAVAL DEPLOYMENTS This morning, according the the US Naval Institute, the Navy has deployed THREE (3) Aircraft Carriers, plus a Landing Helicopter Dock (LHD) off the US West Coast, and TWO (2) Aircraft carriers and their Strike Groups plus another LHD off the US East Coast. Off the West Coast is the USS Carl Vinson in the Pacific (NOT AT PORT) along the Oregon/Washington Border, the USS Essex (LHD) off the coast of San Francisco, and the USS Theodore Roosevelt and its Strike Group off the coast of Los Angeles . . . Off the East Coast are the USS Dwight D. Eisenhower off the Coast of Connecticut, the USS Gerald R. Ford off the coast of New Jersey, and the USS Iwo Jima off the coast of South Carolina . . . The map below lays out the approximate location of the vessels: Given these new naval deployments, and the very large, sudden, movement of troops into Nellis AFB, one gets the impression that the United States is preparing to defend its homeland from actual invasion. Hint: That may actually be the case. Word in Intelligence circles says that if the Supreme Court voids any or all of the November 3 election due to the massive fraud and violations of the US Constitution with changes to election laws, the lawless extension of voting for weeks, in violation of 3 USC 1 & 2, the Democrats are planning on asking the United Nations to INVADE to depose Trump as a "Dictator." There is also word within Intelligence circles that the states of California, Oregon, and Washington, plus New York, might actually try to secede from the Union if Trump gets four more years, and may need to be forcibly brought back under US control, the same way renegade southern states were handled back in the 1860's Civil War." (HT Note: It would gladden my heart to see the US military bombing egomaniac Governor Andrew Cuomo and filthy Commie NYC Mayor Bill DeBlasio back into the Union . . . or to Kingdom come . . .) China and Russia are deploying their naval assets in such a way that transit to the US would not take long! China is positioning out in the Pacific. Just this morning, the British revealed they have been tracking "the entire Russian Northern Fleet" off the British Coast this month, as the Russians head out into the North Atlantic for . . . . something. (Story HERE) One possibility is they are heading toward the Mediterranean to deal with Syria and perhaps Turkey. But what if they're **NOT** going into the Mediterranean? What if they're positioning out in the Atlantic to arrive as "requested" along the US East Coast? It sounds corny, but we won't know until we know and that will be a few days. Stay tuned folks. We're seeing history unfolding. As a precaution, we remind you that your firearms need cleaning and oiling; especially if you haven't used them in awhile. They collect dust, develop surface rust in the barrel. Now might be a good time to take them out, clean them, oil them, and make sure they are in pristine condition. Don't want any jamming or misfires if we suddenly find ourselves having to shoot and kill invading foreign troops, invited here by Traitors . . . who would also have to be shot and killed. UPDATE 12:03 AM EST WEDNESDAY, 9 DECEMBER -- Attorney Lin Wood, who is known to be working closely with President Trump concerning the theft of the November 3 Election by crooked Democrats, posted __this__ interesting item on his Twitter feed. Related??? Might Lin Wood know something thanks to his work with our President? MORE: It seems that China has been snapping-up every Barrel of Oil it can get its hands on; far in excess of what it normally consumes. Storing-up because they intend to wage war, perhaps? Story Here SHOW NOTE: I will be UPDATING this information with all the latest on my radio show tonight at 9:00PM Eastern US time. Tune-in LIVE either via radio or Internet as shown below: Regular AM: KYAH-540-AM Utah Shortwave: WBCQ on both 7.490 and 6.160 AM WRMI on 9.455 AM Internet: (Does not go LIVE until about one hour before the show begins. During that hour, the link streams commercial-free music until the show starts) stream.halturnerradioshow.com:8000/ MAKE SURE YOU TUNE-IN FOR ALL THE LATEST INFO! Now that you have read this story, please COVER THE COST for what your visit cost this site by clicking one or more of the ads below which generates Advertiser revenue of two to three cents per click - no purchase necessary by you -- and helps offset operating costs for this web site. When YOU read a story here, the web hosting company charges us for "data transfer / Bandwidth" to convey the material to you. Without your help by clicking an ad below, this web site would be in danger of shut down from the data transfer charges. Please click any ad below to offset the cost of bringing this news to you
Add 5 bucks and put a handle on that trainer. Perfect practice makes perfect. Without the handle it is not the same.
I wasn’t sold till i saw it’s real purpose... MRE slayer.
Hahaha
P
K p
Multiple MRE were open doing while making this Video.
My Gerber MRE Gator kept me alive.
This is going to be my dads fathers day present. I'm a senior in hs so I'm going to take 2-3 extra days waiting tables this summer for this awesome knife
How dose your dad like the blade
Thank you for paying attention to the front guard, making it adequately large enough to prevent the hand from sliding forward
Lack of a hand guard is a common problem with modern "tactical" blades I find.
I don't understand why so many makers are avoiding hand guards in their designs, it makes no sense to me.
My heart says yes but my wallet says no
I do think the design is great. Very functional and really aesthetically pleasing. I wish I had a better experience with Toor knives in the past but that’s the way it goes in the industry
I really like this. I have been looking for an EDC fixed fighter that still could be used in a survival situation. And I love that the serrated edge is NOT on the cutting edge, and that it looks like you have a 90° spine for ferro rod. This might have just made up my mind. Nice work!!!
Can't wait to add this to my larp kit
Very humbly I must agree hah. Definitely want one.
Me: Does he not know?
Opens MRE
Me: ok, ya he knows
Split Hairs.
This knife is AWESOME !!
Worth every penny, perfect EDC, the Ranger green is a really great color, I love the collaboration, and the sheath with the ULTI-clip really makes the knife .
Thank you TOOR great job ! After using it until it was dull which took a long time I sharpened it so scary sharp it is AWESOME to sharpen I really like the steel it’s made of!
I got this knife four months ago, and I am so impressed it is so useful! The Serrations are total Awesome for cutting cardboard . I can’t believe how sharp I get it. It is very sharp and a great slicer my very favorite knife that I EDC the most! Thank you TOOR and Haley strategic outstanding job UPDATE : I put a TEK-LOK on it , and I really like it. Made in USA just like the blade
What do you use to sharpened the knife
@@tigerbalm6465 work sharp system
Looking at purchasing this.. only finding available on Midway USA. Biggest concern is does all options of this knife come with the training blade? I’ve watched numerous unboxing videos that don’t come with the training blade?
Love the frustrated opening of the MRE at the end!
Received mine in the mail just a few minutes ago. Beautiful work, boys! Y'all outdid yourselves on this one. 👏🇺🇸🇺🇸💯
Not for me, but mad respect for HSP and Toor. I think this'll fill some good roles and function well.
Excellent looking blades.
Hahahaha love it, especially the ending because that's all if be using it for
A real winner. 😎👍
Hahahaha!! Loved he end. Very well designed tool!
Good looking blades.
Badass blade. Just a bit out of my price range
Yeah. I learned to always carry a knife. You never know when you’ll need one.
I was thinking, " probably around $200 ish"
I was thinking wrong
2 knives including the Trainer
With the trainer ( in same metal) and holster, this is a solid value.
@@The_John_Galt yeah! A low cost benchmade is about $100. Their cooler ones are $200 each.
I was thinking 400. Opened the link and yup
Most toor knives cost that much without a trainer too
Seth got chunky eating those mre's. This knife reminds me of a perfected Benchmade Adamas. Look forward to picking one up.
Snagged one as soon as they dropped. Very well thought out design. Top tier companies, top tier steel. Well done.
How has yours held up? The sheath looks like it pinches the blade and may wear the finish.
What an awesome design! I would love to get my hands on one
Is there an option just to buy the one blade for a lower price?
The price is for one blade
Lmfaooo
@@HaleyStrategicPartners I think OP was asking if you can purchase the knife without the trainer.
Are these still available with the trainer blades that come with it??
I have one of each color if you’re interested
When is your Micro chest rig going to be back in stock? That's what I want, and it's been unavailable since April.
Next week
@@HaleyStrategicPartners Awesome. Save me one in black.
when I saw this， I'm like....I WANT ONE!
Looks pretty tight to me Travis. Seems like maybe 1-1.5" might be a bit better but I can understand you wanting to keep it reasonable for EDC use. Nice job!
Do they still come with the training blades? I have one on the way
I have one of the old 3v ones and just got one of the new ones in s35vn i love them, such a good knife.
I got my field 2.0 the other day. Absolutely beautiful. I’m definitely picking one of these up
It's all in how it's used. Best knives I've had in "all kinds of environments" for all sorts of "tasks", were simple and not necessarily expensive; rarely over $100.
Nice design. Dealer in Canada?
One day I hope to have this blade... One day...
Me too bud
I’m really sick and tired of this industry overpricing the hell out of everything. IDC what anyone says. No knife should be worth as much as a rifle or pistol.
"Should" = Personal Opinion /_ negates fact
@@KB-kw8ni What's the "fact" in this equation?
Start learning to save up
Geez i'm buying the wrong guns. All of mine are worth far more than that.
Definitely not a fixed blade unless its had made with exotic materials.
The technology and thought put into this knife is well worth the price. I have many well over this price and they are not as thought out as this. Let's encompass everything that goes into this knife people. Definitely worth more than 200 dollars...
Great job Toor and Haley. Will be buying one. Keep up the great work. Its appreciated. 🤙👊
Glad you finally found something you're good at Toor! 1C
I have the toor charlie frame lock. A little pricey but an awesome knife and worth every penny.
What the hell is the purpose of having a training blade if it doesn’t even fit in the sheath? Am I missing something here? Drawing the weapon is one of the most crucial parts. Please advise because I just spent money on this blade for the purpose of having a trainer that will fit in the same sheath. The knife btw is amazing. Love it. Just pissed I can’t draw the trainer.
Funny you mention this. I bought a Ronin Tactics Sakura blade with trainer included and actually jacked up my trainer shoving it in the sheath the first time. I was super confused like why does this not fit? It kinda pissed me off too. Not ALL companies do that, but I guess some do. Not sure why though? That being said I Still love the Sakura and these knives look great so haha it is what it is I suppose. But something to think about Toor!
Reminds me of a nimravus. I love that knife. I think I'll love this one too.
I like it. Now it’s just needs a Karambit style retention loop and I’m sold.
What brand of pants are you wearing in the starting fire shots ?
What is that EDC gun tray
Its a nice knife. This knife comes with everything, except a price tag.
“Market price”, if you have to ask, you can’t afford.
@@tedcarl5382 Not even close to market price. I could get a bark river that's actually designed by someone who knows what they're doing for less than these. Or a TOPS...or an ESEE....the list goes on and on.
400 dollars for a carbon steel fixed blade from a company nobody has ever heard of, and is known for QC issues...
This is a 150 dollar knife with a 250 Haley Strategic logo on it.
Ill stand by The “market price” comment - If the price ain’t listed, you can’t afford it. Whether it’s a proper deal or not, is another matter, of which I’m not educated enough on. I’m a simple man with simple tools and high speed low drag ain’t in my wheelhouse.
I have several ESSEE knives. Junglass, ESSEE 6, and one other.
I want, and can afford this. Go complain about being poor to UNICEF.
Sir what pants are you wearing 3:02
I've got a knife from Blackwater that looks pretty close to this design. Did you have anything to do with Blackwaters design?
toor website says its made of cpm s35vn steel and that is stainless
Seth! Bruce!! My man!!!!
I've spent years looking for the perfect knife
No bayonet lug. Feelsbadman.
P.S. Same steel training blade is a great touch!
lol real shit, 99% of my knife usage is either A:cutting open food stuff, or B:opening boxes.... but goddamit i want it to be a cool as knife built for the apocalypse
Pocket Sheath is needed!
Designed for 3V.
Sold in S35VN?
I love how Haley Strategic makes you watch commercials before they show you a commercial for one of their products...
I LOLed at the end😂
u guys should make an all black color , id buy that
They do. They were littery painting one in the video.
I would be sold but I’m not convinced it cuts paper since they didn’t show the paper test.
It does not, thats why its not in there.
Funny, I just did a paper test. It works fine.
Hopefully one day I can afford to pick one up I have several haily products they are as bad ass as he is my main go to rifle has the haily inforce on it and it takes a beating
@0:19 It'd be nice if you could ditch the fancy packaging and drop the price by a few shekels. Good looking knife though. I've been EDCing a Benchmade Fixed Infidel for a couple years now, and this appears to be of a similar size but with a lot more utility.
As you can see a lot of work, time, materials and R&D goes into making these.
Seems to be made for smaller hands, I don't have large hands
It’s 99% CNC machining. The human literally presses a button for most of the work. Why so much money for it? To each is own.
Agree 100%
Well they have pay off the CNC machine, meet payroll for US employees, pay taxes, and many other fixed and variable costs.
395 I knew when he said it had a training knife it was goijg to be pricey
Premium steel that isn't cheap, labor, G10 isn't cheap, It isn't 99% CNC machining. The CNC is only used to cut the blade shape, everything else is done by hand. Using a CNC machine enables them to make production quality and quantity. Dimensions stay exact, tolerances stay exact.
@@braxtonnelson7976 I’ve got custom hand forged Randall’s that cost close to that knife.
Did he say “chrome rusts, stainless rusts but you just don’t see it”? What does that even mean lol
The look of despair when opening the MRE..... thinking.......I won’t shit for days.
5:50 that’s the main reason most guys I know myself included sometimes need a knife to open up the shitty Mres lmao
I'm going to have to sell some professional larping classes to pay 400 dollars for a 65 dollar knife .. thought it was Bear Grylls for a second
Does it come with any of those chocolate chips?
You black nitre it if it rust. Change the red rust to black. I have did It on cap n ball guns.
Remember it is not the knife its the man that wheels it.
I'm having that. It will be mine.
Thanks Travis.
A beauty, and I love the double edge aspect. Slightly too big for tactical EDC, at least for me. Considering the Krypteia, but I just bought 3 other EDC tactical fixed blades. ProTech Rockeye, T. Kell Combatant, and The new SOG Pentagon. Damn it, I like this one though. Shit...
The sigh at the MRE lol
Can anyone ID the radio pouch add on to the D3CR at 3:13?
Coming soon
@@HaleyStrategicPartners excellent! I know myself and a bunch of coworkers that have been looking for a product like that for years now!
Anyone know how to insert these friction offset pads? Can’t seem to see a way other than opening the entire holster which seems like a bad idea. Would appreciate any advice!
They stick on outside for body kit. It velcros in between the teo sides.
Basically it's a Gucci knife. Got ya.
Basically
During Trump, that $400 could buy you an entire AR. I'm just using walmart knives and they have stood up for over a decade without chipping so far.
The knife does look slick though.
"Stroganoff...Aaaagain..." 😤
Dat Boooooouph! Glad y'all doing great stuff over there man!
$400?? That’s a tad over priced and this is a poking knife not a multipurpose knife. Unfortunately this would be 4-5th on my list of options to take with me anywhere. The only group of people I see using this design are door kickers.
Yea not multipurpose in the slightest!
Yup, getting one. I'm a huge fan of fixed blades for weapon retention/edged defense.
Looks like a great product, and the price is reasonable.
I wish these were still 3v.😢
Pro tip.....
Travis Haley plays Bass for Steel Panther.
True story.
Anyone recognize the programs used in the sketch design and the 3d model?
4:35 guy has boxing gloves for demonstration while the other puts knife to throat lmao
Clearly, the guy with the knife doesn't have skills. Sorry, just saying. ✌
Nice tool
not going to buy the Blade... I own the Toor Serpent... Love it... Love the Finger hole. Love the end of the clip... actually realistic as hell.
Serpent looks badass but all sold out!
Perfect, what else could one possibly need during the times were in, where ammo is almost exclusively available to the rich only?
A stamped steel knife for $400 dollars. Nice dude
Travis Haley looks so much different wearing the wig when he plays bass guitar for Steel Panther.
More length please
Awesome 🇺🇸
Do you guy’s have any interest in sending one of those out to people that do knife videos? I’d love to get my hands on one for a a few videos.
I’ve been told by a few ppl to stay away from Toor. Was told the cs wasn’t good to say the least and different issues with knives themselves. Also the one I hated most was someone was still charged the restock fee when his knife he received had areas where the tan was already worn off when he had just opened it. Beautiful knives in my opinion. But I’ve been told a lot of bad about this company and they are still a new company.
The MRE!!!!!
I'm not so badass I need a dedicated fighting knife.
I do keep an esse5 on my PC via knifehook but mostly for utility and "survival" tasks.
These look cool to be sure but I don't match it's level of cool guy
Hey Travis, can you please make a video about the current state of affairs?
If I could I would if only to support Veteran owned/operated companies. Unfortunately, my 8 yr. old is also my accountant and has absolute control over my finances. I want a Sig 320 compact RXP for my but a skateboard and pads are apparently MY priority according to Mr. Dominic,.....thats my accountants name.
My boss is the same way. This month we have to procure some Lego sets. Nothing left in the budget until Q1.
Nice 👍🏻
opening bad guys or mre's..the applications are limitless; i assume they're also good for peeling crayons #semperfi
That's a great looking knive but it's way above what I can afford
Bad ass knife not so bad ass price 350$ ? Knife or pistol? Pistol
I want to be a warrior!