All this kind of Writers on youtube works well, but they don't show how Image is transfered from Computer/Laptop to this machine on real time (you check any video that part is not shown). So I think we must load the image in Arudiuno chip and then start printing with is bit a lengthy process. What we want is super fast speed printing ie: we select a image from our pc transfer it to Arudiuno for printing (all on real time basis).
the final machine is a little different than the one made in the video. The threaded rod is differently connected to the motor and then there is a wheel connected to the bottom of one of the axis.
Hey Mr Innovative , Can you please sell its DIY kit or atleast give templates to cut 3d printed parts ? i am tryig to make this badly but the old one using dvd drives failed , i need proper 3d printed kit
Ilkay Yilmaz 🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
muy buena que programas usa como le meto las imagenes tipo g ?? traducion very very good, how do I put the images, type g? Porfa upload a video of how to use it, congratulations
Love that PCB.....well done.....
All this kind of Writers on youtube works well, but they don't show how Image is transfered from Computer/Laptop to this machine on real time (you check any video that part is not shown).
So I think we must load the image in Arudiuno chip and then start printing with is bit a lengthy process.
What we want is super fast speed printing ie: we select a image from our pc transfer it to Arudiuno for printing (all on real time basis).
Ye bin jl PCB ke kam nahi kar sakata ha isme agar battery laga de aur pura PCB laga de to kam karaga
What type of power supply you are giving to the motors as this thing you have not shown in the video???
12v 3amps
How can i give command to it to write
platform with a servo drive could be mounted from below, the center of gravity would be lower
Fantastic!!! Really wonderful
Awasome. Man....goooood ...very nice........
How did you do your programming?
The L293D ic's become very heat when connected to this stepper motors.
use heatsink for less heat
or use L298n
Without music/noise rather noise it could have bearable.
Very very good machine. Thank bro 😁👍
3:22 size of nut and bolt?
where the program....???
the final machine is a little different than the one made in the video. The threaded rod is differently connected to the motor and then there is a wheel connected to the bottom of one of the axis.
thanks im definetly going to do 1 of these but could i swap wood for 3d printeed pla instead
Please vedio , Arduino uno writing machine ki program coding eeala rashtaru vediolo chesi chupinchandi thankq
Wonderful. But why didn't you use a CNC shield on it?
😂😂😂😂 jlcpcb ka pen full vasool 😂😂😂😂
please mention which type of rod you are using
Thank you man ,keep it up😘😘
What software ur u using to instruct the machine
Can I connect 28 YB - J 48 motor instead t of this stapler motor
the first two motors are normal motors or servo motor?????
which one software are you using for this. Can we use benbox for this?
sir o green colour ka kit kaha mile ga jisme ic, pin etc lag raha hai please bataiye na
Onde consigo placa eletronica ja feita
Can we extend its length and breadth by taking long bolts than this
Which software u used for writing
Can we increase the drawing area of this plotter with little big scale and how should be the code change for it
can u tell me please size of the bold and net please tell
My friend aap aap Jo part lagaya hai uska naam thoda mujhe bata do Jo park Pintu machine ko connection hua hai
God Job !
Hey Mr Innovative , Can you please sell its DIY kit or atleast give templates to cut 3d printed parts ? i am tryig to make this badly but the old one using dvd drives failed , i need proper 3d printed kit
Sir do alag alag stepper motor ka istmal kar sakata hu
I can maker with machine 5v?i have a cnc shield
Hey Mr. Innovativ, how about estlcam and arduino cnc shield? Thanks for the videos !!!
Ilkay Yilmaz 🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Which district you leave
It's good but what will be the cost for all the things
Can u make number writing mansion I can perhaps that place
what is the software to give it the picture
¿Que tipo de lapicero usaste?
Hello can u help me we r doing this project for college exhibition
Will it make large drawings like in biology as I am in class 12 ,by extending length of axis. Would programming in ur other videos work
Where r u from broo....
Làm cái quá dễ há.
Bgm 🤩.. mey..mey...
i need to buy this
What is the power supply given to circuit
Will you give this and cost please I am interested in buying this
Can we use L293D Motor Drive Expansion Shield with arduino uno for this project with your codes instead of printed pcb as you mentioned?
Wasantha Wimaladharma you can use l293d motor shield
What about programming, software detail,gcode?????
muy buena que programas usa como le meto las imagenes tipo g ??
traducion
very very good, how do I put the images, type g? Porfa upload a video of how to use it, congratulations
Para generar el código G, con Inskape o Vectric Aspire (son los que más uso) y para mandarlos es con el Universal G code Sender / GRBL.
Salu2
What's the use of it can't lift the pen to write other words?
good job
What about its speed,
Can it be increased?
Very nice
Hello sorry Did you use Arduino?
slowly works
Sir arduino uno or moter shild ka use kar sakata ha ka
Yes
Mr Innovative thanks sir
Nice video. I think that you should sell kits to build a CNC.
Sir can I replace the motor with DC motor 12v
आपने voltage कीतना दिया आपके system को
Will it make big drawings if we extend the rods?
Yes
Jlc PCB what is delivering charged
Thanks for this great effort, but can you? Use the code with Arduino Omega 2560
Aap jab dusara wala row me jab app pahali bar laga tha to do hi tha par jab kam kar raha hai to 1 aur angle laga diya hai
iska koi software hota hoga isse command kese milegi
From where did u get this wheel plz tell us
its from local glass store
Mr Innovative how can we get it
How i make with Arduino uno.. please help
Aditya Kumar the process is all the same. just follow the pins as nano.
Aditya Kumar hello friend please send me your WhatsApp number
Md Arshad Alam
Seems legit... WhatsApp number over internet,
Can I use l298
Wherw did you get the bolts
Can you plz put its pcb Gerber file link
How to get details for making This?
Hey my servo is not working what could be the problem
Hello sir I want this complete machine
Sir I want to know that If i use simple DC motor instead of stepper motor it works or not
Chetan Kumar no it won't work u need stepper motor u can either use cheaper ones
I like it
Saman kaha seangate ho bhai
Can you share your mini robot files
Your file doesn't match the image in jlpcb images why
Ka isko android sa controller kia ja sakta ha
From where you got the rods?
Hangers, I think
How to set stepper moter 6 wires
Hay quá.
Sir how to command this device to draw any design
nice background music 😊😊😊
Frd i have CNC I will give a tool path can you try it on
Laptop connection process and drive step please videos make
can u share pcb layout
What is the Amp of the 12v adapter?
2
my cnc program is running but the cnc is nor working please help
Can someone please give me the gerber file of the same arrangement of pcbs..???
Nice
Sir I have 12v 28byj-48 stepper motor but it runs very slowly
What is the solution
hi, can you solved that problem??
Ok. If i need three motor connect? (+ Z)
And how to tell the machine what to write?!!
In English or in your selected language. You have to be persuasive.
This is purchase or not
Can't get a video with software information
Can u make this for me