DIESEL RAT ROD Engine Build Part 2
HTML-код
- Опубликовано: 8 сен 2024
- Steve rebuilds the D-Rod to be the best its ever been!
Welder Up Store: welderup.com/c...
DON'T FORGET TO LIKE THIS VIDEO AND SUBSCRIBE TO THE WELDER UP CHANNEL!
#Diesel #RatRod #DRod
No offense but I like your RUclips channel better than your TV show.
I understand why TV is the way it is but I like watching wrench turning.
I like the way you explain what you are doing and how it works.
Good job!
Thanks again buddy for keeping us up-to-date she's going to be bad
Thanks for the support buddy
Excellent video, clever,and the absolute high point of my day was watching you cutting that bolt while holding it with your fingers,,😄 brillianto
OMG that was terrifying. Made me cringe. I would have looked away but figured since title of video wasn't "this is how I lost my finger" I was ok haha.
Ready to see this beast in action again! Maybe see it at sema?
Oh man it's like a ratroding Christmas can't wait to hear the D-Rod come to life.
Doom Punk thanks for you support
@@WelderUpVegas I like your u tube better than the tv shows. I have a 95 dodge 12 valve with a p pump watching your videos while in rehab after losing my left foot I have,decided to keep the old truck it's a 5speed did think I would be able to drive standard aging. If wanted you to build me something could I use this for a doner or do you need to get them
Just wanted to say thank you very much for making these videos! I love watching them!
Had a blast on the tour on Friday Steve. Was so cool to be so close to the infamous D-Rod. Thanks for making those tours what they are
Good video thanks for sharing 😎👌🇺🇸
I think it is so badass that adapter plate that is super handy starter and let you keep on doing what you do with the masterpiece I love seeing all your knowledge behind your work brother super badass no doubt about it Superfreak right there👍👍👍👍👊👊👊👊👊
I'd like to just be that garage band in the corner of the house laying down that dirty "ditty" .....
Damn good overdub editing on that funky groove. 🤘 That's one thing I've noticed (amongst others 😆) that fits, that this dude gets. (Don't get rid of him, them, her, it)
I love getting to see these details. I would really love to see all the excruciating details that go into a full rat rod build. Suspension, frame, brakes, and steering especially
Steve that was a way cool trick to clean out the bolt holes.
Put freak nasty on the side of that bad mamajama woo-wee that thing is amazing man👍👍👍👊👊
You're the coup de grace when it comes to building rods like that. I think you set the bar. Miss the show
Steve i cant wait to see the D-rod hit the streets again i fricken love that rod , that car is an icon ! ✌️👍🇦🇺🍻
Turbo charged and NOS, That 12 valve is gonna be a torque monster !!
That adaptor plate is the mutts nuts
MONSTER power.
Coming to welder up in October can't wait to see the d rod in 3d
that looks sick mate, awesome kick ass engine
I like the way your just explaining stuff, and the "it is what it is attitude". Shit don't always bolt right in. Very natural the way you just take it on. Keep it up, !!! L J
Drod is the king , you are the kings , very good information
I’d love to put a Cummins in my OBS Ford F-250 , that is one sick build . Cheers
Wondering why you just didnt use a tap to chase those threads in the block. But cool trick useing the cut bolt lol
Awesome video! Thanks for info stuff like that adapter plate iam still learning!
Steve you are my freaking hero
Hey guys, love everything you all do, being the iconoclast that I am.
However, you all REALLY NEED to get ahold of Kano Labs online and get all of their products!
Kroil is the basic product, oil that creeps into threads and tiny cracks. Then they add graphite to get Penephite, the Grand Daddy of penetrating oils. NOTHING ELSE COMES CLOSE!!
Add silicon and get SiliKroil, a great all around light lube!
Many other great products, try them all! I did 30 years ago and never looked back!
WD40 and other penetrating fluids are USELESS compared to Kano’s Penephite!!!
Valve LASH ,YEEEEHAAAAA ,LASH those valves BOY! 🤣👊🇺🇸
That's going to be an awesome Rat Rod guys good job!! I just wish I could ride with you guys!
Thanks for educating us,
thanks Steve!
Who are you kidding..... It will sound awesome! 1000hp with nitrous... Will sound like the world is ending. When I am monkeying with cool stuff I forget the clock exists. Cool build.
Great job of explaining everything!
Thats f'n wicked
You should look for a 2.4 turbo diesel bmw engine .they came in some Lincoln's in the states .they are sweet engines. Easy to convert no ecu
I’m sure you’ve heard this before but you should hit up Hoonigan and go show them how to do a real burnout!! It would attract a lot of people to your channel so we can get even more bad ass content. Great job man, love your channel
"Grinded" is the past tense of grind. :D
Like your youtube video's better than the TV show. Gets right down to it without all of the production BS,
I wonder if a Jake brake would be better or worse than a parachute! I'd Love to hear the D Rod GROWWL!
awesone again steve and crew
Enjoying these videos. Keep it up Steve. Txs
Love "SIN" flashing.
Great channel,Bad Ass!
Another great vid bro
Awesome stuff love Watching this
When it's done take it back down the 1/4 mile. Be good to see what number you run. 🤙👍👌
Keepem comin
like how the kid just want to work while you trying to talk
Love the DRod
I had this idea that Steve Darnell resembled some old 50s and 60s Hollywood actor. finally figured out who it was. Vince Edwards.
Time for some builds to offset the cost of your new engine. Best of luck on your next pass.
Great video but please use a vice you need all of your fingers 😉👍
You was making me cringe waiting for the grinder to catch and bounce it only takes one time
Having done that thousands of times, I can tell up it makes a perfect "divet" in n your figure that eventually heals over (but itndoesbhurtnlike hell! Lol)
@@billrandell4641 I have worked in the steel industry for the last 13 years and I have a garage you are right but its far easier to vice it.
them 1.2mm fast cut discs will be half way through before you know it
Didn't I just see this thing in Montana on the back of a crazy flatbed truck?
It had paddle tires on it.
Lol... not sure why... but taking a 4 1/2 grinder with a cutting wheel to cut a notch in a bolt is crud I do myself all the time... but to watch someone else do it scares the crap out of me! Lol
You are going to lose your fingers using a grinder like that !
i agree 100%
If your in this field worrying about health and safety protocols should of applied for med school.
Most important aspect always safety glases.
My favorite tool is the liquid wrench. 'Torch powaa!!
The trick is to get good at it before you lose any fingers. He passed the test...lol I count 10. Welderup "don't need no stinkin' vices". LoL
@NJ_24V nj_24v as a mechanic if your very good at what you do you don't get your fingers cut.
We eat 10w30 for lunch and a lb. Of rust by noon time.
I pictured one of his former workers going to ER. Dumbass probably used to refer to him...? Wished I woulda put it in a vise! Or, I used to like power tools...lol
At least it's not an LS
Hi Steve. Do you have any recommendation for a turbo i can buy that will go on a ford ranger 3.2L diesel? I dont really know cars but just want a turbo for my ford ranger please. Im from New Zealand .
100% badass brother i luv it
Love it
do you build the engine the same each time ? or do you try to build it different to make it stronger or better ?
Yes, I always change it up. My imagination won't let me do the same thing twice. Thanks for watching!
Why have you stopped using industrial injection
Don't worry about those fingers ,,,
Those wheels never come apart....
Shity threads suck...
Spinning the motor on the forklift like that will unscrew the bolt and drop if someone gives it a spin one of these days
Won’t be able to see the nitrous inlets 🤔🤔
Do something cool with a 74 mustang II...
Lose the FASS sticker on the side .............
Thumbs down from disgruntled Ford owners after seeing that the only reliable component of the 6.0 litre power stroke was utilized on this project......the starter motor
First at last 🙃
Got a cheaper way tho, bottle per injector lmao have them come on and off the same time! BOOM can you even imagine putting nitro into a diesel engine? i can't TRY GASOLINE much much cheaper and safer SAME OL SAME OL BORING SHIT ~ DIESELS STINK next be making a diesel motorcycle
Watch Diesel Brothers. They already made a diesel powered motorcycle.
@@markbremmer8642 that a cool show dude thanks
👍✊🤟😎🇬🇧
Jesus at least wear gloves,that's a nasty burn from a grinder.
Please don't do that with that grinder I'm cringing😳
First at last 🙃