There's plenty of schematics online, you can even buy FM transmitter modules that would most likely be able to achieve that range with an external antenna. Of course those are only meant to be used at short ranges as interfering with any other radio station is illegal and I don't condone that
I purchased those same low quality junky chinese switches for some of my projects. I had exactly the same results.. They're not reliable and heating them up enough to solder wires to them will do even more damage to them. I bought mine on Amazon.. I warn anyone. If you're trying to build anything you're going to want to be able to rely on, you're going to regret using them. Pay more and get quality switches.
This is kind of genius in it's simplicity
If you had blueprints or kits id be your first customer!
Nice solution the switch power box, why i never think of this before :)
thank you sir. Hey is there a way to create my own 7 km FM radio trasmitter any schematic?
There's plenty of schematics online, you can even buy FM transmitter modules that would most likely be able to achieve that range with an external antenna. Of course those are only meant to be used at short ranges as interfering with any other radio station is illegal and I don't condone that
Do you have an expirience with injectors with 10 Mhz reference signal injection?
Not yet. I didn't really have a need for that kind of stability, plus it's not very affordable where I live
@@dereksgc ok. Thanks for reply. I've got a transmitting BUC, but unfortunately it requires a reference frequency. But anyway, tnx
Are you using leaded solder on your radio projects?...
Can you receive noaa with dish with tv lnb?
no, the lnb works at a completely different frequency
Where did you find the Dc-dc converters?
Local electronics store, but the design is so generic that just about any distributor of electronic parts should have these
@@dereksgc is it adjustable voltage or is it predefined
@@HåkanJohansson-g4z You can get both types. These have the blue trimmer which you can use to select the output voltage
Very usefull device
I purchased those same low quality junky chinese switches for some of my projects. I had exactly the same results.. They're not reliable and heating them up enough to solder wires to them will do even more damage to them.
I bought mine on Amazon.. I warn anyone. If you're trying to build anything you're going to want to be able to rely on, you're going to regret using them. Pay more and get quality switches.