Thanks for this video. Nice Job. Already got a bracket and pole and just found your video. Been looking for a clamp like that, much appreciated. Thinking about adding a second bracket. Wow the fiberglass rods have gone up at Grainger, now $77. I got a similar bracket from Halk Marine $135, excellent quality and made in USA. Got a 9 ft SuperStick pole from Cabelas for $87, excellent quality and made in USA.
@@PrestigeWorldwideFishing throw a manual lawn edger head with a pin on the bottom then add pin through the neck of your bracket and glass rod and I bet lot less travel. Just an idea. Thanks for the upload.
Kinda the same I have 2 rod holder so I took 1 1/4 and used a h and r fittings I can still use the rod holder and I run the rod down the t fitting use 2 and lock in the corners 1680 express w yam 60
You probably dont care but if you're bored like me during the covid times you can stream all the latest movies on InstaFlixxer. I've been streaming with my brother for the last weeks xD
I just have a question do you have a link to where I can buy that 10 foot fiberglass Pole. You said something about Grainger but it looks like Grainger is a popular name. Any help you can provide would be greatly appreciated
Links to everything I used should be in the description. We have a grainger store in our area so I went there to save a little on shipping. Good luck! Link to pole: m.grainger.com/mobile/product/DYNAFORM-Rod-4ATL9
Front and back would be the way to go in our opinion. Your boat won’t move an inch with that setup. Tag us in a pic on social when you get yours finished.
Great idea I did the same for my pontoon boat but that bracket in the back I had made up by my own welder for only fifty bucks and I made the pole out of PVC stuffed with wooden dowels for only $13. But I do like that fiberglass Pole you're using
Awesome! The bracket is the most expensive piece so if you can weld one yourself you can really save money. The Fiberglass rod is nice because it isn’t buoyant so it sticks in the bottom easier.
Everything we used should be listed in the description. We found the locking collar on Amazon: www.amazon.com/Dernord-Stainless-Sanitary-Single-Clamps/dp/B0734L5FWS
Yeah bracket is a little much. Cheap compared to power pole. My suggestion would be to find a welder friend and have them make you a bracket. Good luck!
@@PrestigeWorldwideFishing ... Be VERY CAREFUL of fiberglass rods. Once they flex they will splinter, very fine splinters. Sliding you hand on that pole you will be hating life. I got my 3/4" x 10'-0" pole at Graingers. Not sure this is the exact material but I believe it may be. It is a composite, NOT fiberglass. www.grainger.com/product/POLYMERSHAPES-Rod-6MEP0
... Why? Please post the facts where you know this information to be. Thanks. ..... They mount dual 10 Power Poles on jack plate engine brackets every day on new boats.
![Best AFFORDABLE Shallow Water Anchor Pole [MANUAL Power Pole]](http://i.ytimg.com/vi/1u6jMfmHYdk/mqdefault.jpg)
Thanks for this video. Nice Job. Already got a bracket and pole and just found your video. Been looking for a clamp like that, much appreciated. Thinking about adding a second bracket. Wow the fiberglass rods have gone up at Grainger, now $77. I got a similar bracket from Halk Marine $135, excellent quality and made in USA. Got a 9 ft SuperStick pole from Cabelas for $87, excellent quality and made in USA.
Glad to help! $77! Wow that is crazy. I guess everything has gone up now so I shouldn’t be that surprised
That's definitely a cheap alternative. Great idea and thanks for sharing ;)
The pole is tuff yeah!
If you drill a hole between the bracket and the pipe at different intervals you can put a metal pin in to stabilize the boat a little
That’s a good idea!
@@PrestigeWorldwideFishing throw a manual lawn edger head with a pin on the bottom then add pin through the neck of your bracket and glass rod and I bet lot less travel. Just an idea. Thanks for the upload.
That’s a great idea! Thanks
Thanks for this! Was looking for the clamp to add to my SUP anchor pole 👍
You bet! Glad I could help
Kinda the same I have 2 rod holder so I took 1 1/4 and used a h and r fittings I can still use the rod holder and I run the rod down the t fitting use 2 and lock in the corners 1680 express w yam 60
You can use 8 or 10 ft Bank poles fiberglass
$250 for that mounting plate? That is lakeside robbery. They made $230 profit. No way bro.
BadCow I know that part is crazy high priced, but can’t weld, so that was my only option.
Two of em and you bought a talon
mbb6180 where can I get a Talon for 500.00
I have an old bracket for a transom mount trolling motor that I use for that
You probably dont care but if you're bored like me during the covid times you can stream all the latest movies on InstaFlixxer. I've been streaming with my brother for the last weeks xD
I just have a question do you have a link to where I can buy that 10 foot fiberglass Pole. You said something about Grainger but it looks like Grainger is a popular name. Any help you can provide would be greatly appreciated
Links to everything I used should be in the description. We have a grainger store in our area so I went there to save a little on shipping. Good luck! Link to pole: m.grainger.com/mobile/product/DYNAFORM-Rod-4ATL9
I'm thinking one on the front and back. Or one on each side of motor
Front and back would be the way to go in our opinion. Your boat won’t move an inch with that setup. Tag us in a pic on social when you get yours finished.
@@PrestigeWorldwideFishing lol, that was smooth
I was thinking about rigging something like that.
Works great. Only problem is it isn’t automatic 😂
@@PrestigeWorldwideFishing one less thing to break
Very true. Just remember to take it out before you move… lesson learned 🤚
Great idea I did the same for my pontoon boat but that bracket in the back I had made up by my own welder for only fifty bucks and I made the pole out of PVC stuffed with wooden dowels for only $13. But I do like that fiberglass Pole you're using
Awesome! The bracket is the most expensive piece so if you can weld one yourself you can really save money. The Fiberglass rod is nice because it isn’t buoyant so it sticks in the bottom easier.
I wonder how much a local fab shop would charge to make that exact bracket? It couldn’t be $250 that’s for sure!
at least half the price, probably save a lot more.
2022 says otherwise
I did the same on my boat. Put a pink grip on your pole so you don't forget to pull it.lol
Where did you get the locking collar?
Everything we used should be listed in the description. We found the locking collar on Amazon: www.amazon.com/Dernord-Stainless-Sanitary-Single-Clamps/dp/B0734L5FWS
I used the adjustment lock clamp on one of my kids old bicycle seats
Thanks bud appreciate that
I’ve thought about doing something like this, I don’t fish shallow enough to justify power poles. But DAMN $250?? they sure think a lot of them lol
Yeah bracket is a little much. Cheap compared to power pole. My suggestion would be to find a welder friend and have them make you a bracket. Good luck!
You can get the fiberglass rods much cheaper online. I got mine for $10.00
I wish I could remember the supplier’s name.
paisa007 Awesome! Post it on here if you find the link.
Prestige Worldwide Fishing I also rigged my own pole mount.
ruclips.net/video/wMGHkycMZC4/видео.html&feature=share
@@paisa007 minimum 5 rods!!!
@@PrestigeWorldwideFishing ... Be VERY CAREFUL of fiberglass rods. Once they flex they will splinter, very fine splinters. Sliding you hand on that pole you will be hating life. I got my 3/4" x 10'-0" pole at Graingers. Not sure this is the exact material but I believe it may be. It is a composite, NOT fiberglass. www.grainger.com/product/POLYMERSHAPES-Rod-6MEP0
@@pooterdoc from where?
Awesome video & Keep up the good work...I just subscribe to your channel...Check out my latest boat videos
Wow. Robbery. Can be made for way less in shop and about an hour
Agree
You paid 250$ for that bracket? Omg!! I can make that for about 5$
Awesome! Do it. I don’t have the skill or equipment to do that.
hardyhandshake hey I will give you $40.00 for one , if you will make me one?
If you do this to a new engine and mount it the way you have it mounted it will VOID your WARRANTY
This option is more for those of us who can’t swing a new boat or power poles 😔
... Why? Please post the facts where you know this information to be. Thanks. ..... They mount dual 10 Power Poles on jack plate engine brackets every day on new boats.