Learning to 3D Print with the Adventurer 3 by FlashForge
HTML-код
- Опубликовано: 28 авг 2024
- FlashForge Adventurer 3: amzn.to/323DrPp
Filament Holder I used: amzn.to/326Iw9O
Hatchbox ABS: amzn.to/2Nzo25y
Painter's Tape: amzn.to/2ZpFhbz
Where I got my designs: Thingiverse.com
#TechInfluence #FlashForgeUSA #3DPrinting
Follow me on Instagram @rickerlife
Where I get my channel music: share.epidemic...
Looking for aerial stock footage? Check out my Adobe Stock contributor profile: stock.adobe.co...
My drone gear: www.EdRicker.com
AirVūz FPV Channel: www.airvuz.com...
Check out my video making gear at kit.co/EdRicke...
DJI Mavic 2 Pro: amzn.to/3LKQpYE
DJI Mavic 2 Zoom: amzn.to/38jAvHg
DJI Mavic 2 (UK): amzn.to/3PKoGdR
DJI Care Refresh for the Mavic 2: amzn.to/3LLaSN1
If you're looking to be a commercially certified drone pilot in the US, enroll in the Drone Pilot Ground School below.
dronepilotgroun...
Get $50 off by using the code: RICKER50
The product in this video was provided free of charge by FlashForge. The opinions expressed herein are those of Ed Ricker and are not indicative of the opinions of FlashForge.
FlashForge Adventurer 3: amzn.to/323DrPp
Filament Holder I used: amzn.to/326Iw9O
Hatchbox ABS: amzn.to/2Nzo25y
Painter's Tape: amzn.to/2ZpFhbz
Where I got my designs: Thingiverse.com
@@dbdekudb6338 No it can’t
what slicer do you use I have the same printer tho I cant find which slicer to use for this printer
@@Ravideo420 it's called FlashPrint, made by the same company as the printer, FlashForge
Hey there Ed, Great video brother and everything you said was really super close or spot on. I'd like to reference the "popping" sound.. That noise is the filament extruder drive slipping on the filament. The most common reason is actually in the gcode. If the .stl or gcode if you will, Tells the extruder to feed filament faster than it can run through the hotend, It can happen mid-print as well. In fact you'll notice it mid-print more often than at the very start. All it means is the gcode is telling it to feed filament faster than the hotend is putting it out. But at the end of the day it won't hurt anything at all, In fact you need steady feed pressure from the extruder to the hotend to maintain a steady flow from the hotend. Often if you adjust the hotend / Nozzle temp 5, 10, 15 or 20 more degrees C on the hotend will cure that. You're doing great with 3D Printing and I happy to see you having fun with it.
thanks for that
your review is better than most of the "pro 3d printer peoples" came up with! very good. and thank you!
Good luck Ed. I have been 3D printing for a couple of years now and you are right, it is fascinating. Rapidly though, you will find out what a great device for making and designing part and devices you might need and can not find elsewhere. I have two now a 300mm bed and a 200 mm bed. Enjoy.
I've bought a second hand printer like this one. Looks promising thanks for sharing.
You could wind from the 1 KG roll onto the "standard" roll too, I suppose.
I just got a FlashForge Adventure 3 lite and this video helped a lot thank you
I just got mine in the mail today, super excited to start printing!
If I may ask, how is the "lite" different than the regular Adventurer 3? I have a the 3...just curious. Thanks.
The only different I've seen is it doesnt have the camera
@@MrLittletaylora9 Oh ok. I don't use mine. I'm skeptical about logging into a Chinese web site to access my camera...
redmist1122 I’ll buy it
Thanks Ed great review I've been looking into get one and you clear up a lot of my questions Thanks Again great channel
I bought this and it's been great so far
3 questions. First, can we use PETG if we want to or is there a type of a filament that we have to use it on this 3d printer like the red one we got for example. Second, if the bed is really dirty and really smooth, do I have to buy a new bed for the 3d printer so is that the main issue is resolved for example like the model floating in the air while printing. Lastly, if the filament stops inserting from the nozzle part, is it the 3d printer issue or the filament issue. If 3d printer, can you give me a tip to fix it. So basically, the filament does not come out from the nozzle part, it just stops from there. Thank you if you answer this
I audibly gasped when I realized that you bought a spool holder instead of printing one, didn't even know these were sold at all!
Very good! I actually understood what you had to say (believe me there are a lot of videos out there that are just confusing)! I bought this printer yesterday and it should arrive today, so fingers crossed. Thanks. :)
How do you like it. I just got the lite and will be in monday
Good video! I have one of those and was able to print tpu without much issues, got some really nice parts out it. Just give it a shot!
How did you do it?
Awesome, is there something you had applied to prevent the filament from sticking on the print bed?
Use stoner on ur base it's a silicone mold release we use it in our extrusion plant
You should just start doing tech review videos Ed. I remember the original Mavic videos. Just Do it!
Great prize Ed, hope its me who wins but also good luck everyone ;)
Great review.. Thank you for your time...
Hi Ed, Great video! I’m fairly new to 3D’s but have the same unit and have designed several models thus far. I’m slicing with a Flash Print. I’m having a problem printing the bottom wall layers of a large rectangular box. The layers sag and end up looking sloppy. Once the walls are about a 1/4” high, they print much better. Is this a slicer setting or bed temperature issue? Any help is appreciated!
Good review, thanks.
I hear this one isn't the best but it's a great starter to get into 3d printing
Unfortunately I didnt had a good experience with my flashforge adventurer 3 pro 2 ever from out of the box and only was able like print 2 or 3 very nice prints then it started malfunctioning. The filament feeder almost never pulled the string and i changed it to a new one and still continued having the same problem. So sad because it was a gift from my girlfriend.
Hi Ed, I found your video when I was trying to find a solution to the extruder 'popping'. The solution is really quite simple and was found on another video (link below). The standard steel gear doesn't tend to grip well and will slip. I have replaced the gear with a 40 tooth brass gear and have noticed an immediate improvement. I have owned one of these printers for about 3 years now, and have had some great results.
In regards to ABS, I gave up - unless you can find the perfect ABS filament without spending about 5x more, then the best way is PLA.
Here is the link I found.
ruclips.net/video/8Ft18zsjUIQ/видео.html
I was told to change the layer height from 1.8 to 2.0 and that (for me anyway) stops the knocking
👍
Hello i have a flashforge finder and i want to print a drone but the problem is in my file is everything that i want to print but in place where you see the layers it is not everything. Could you help me with my problem?
I just got my printer and it doesn’t have the box that comes stock to print how do I get that
I recently got this machine and I was able to print 4 successful prints with 0 issues. I recently have been having major problems. 1 when I start a print it says “filament error” and stops the machine while there is nothing wrong with the filament or any type of clog as the print is coming out perfect. And 2 the printer will print smoothly for literally about half the build and then it will stop extruding. So as you can imagine I need help please!
How do you print anything other than PLA or ABS with it? The software only allows to choose those two and my manual also only lists those two materials.
Can yours print without a raft because mine cannot
I have the adventurer 3 pro but I don’t think there’s any difference
I used a raft frequently for most of my prints with the Adventurer 3.
how do i connect my crome book to my printer through WiFi
When I printed my box it had a base, just wondering did your have the same problem and how did you stop if from happening
Same here, the base is a support structure and you are meant to snap it off, it shouldn't take much force
hello I got this 3d printer and its very hard to get something of the bed of the 3d printer?
what should I do?
You can try heating up the printbed again, and then once it's hot, remove the printbed and bend it to release the base of the print.
how do you put files on a usb then into computer, i put 3d files onto my usb but they don't show up on the printer
Make sure the camera is off (auto, not manual). The Adv. 3 cannot use the USB port and camera at the same time.
What kind of software did you use?
FlashPrint, it comes with the printer.
I got one,I don't know how to use it
I want to sell it
What software do you use
For this printer, is the FlashPrint software that comes with the printer.
How to stop and continuing the printer?
I dont think this one can resume printing after stopping.
You can pause and continue but not stop and continue
@@TechLuvnMomma sad to heard of this one problems but i didn't know if power failure happen 😂😂
can you use carbon fiber filament with this machine?
It's not listed in the approved filaments, so I don't think so.
I use it it and it works well
How difficult is it to copy and print something that already exists? For example can I copy and print my sunglasses frame?
That's a lot more involved to do, but there are ways to scan objects using apps on a phone. Check out this design, it uses your phone on a turntable to analyze the object with an app. www.thingiverse.com/thing:1762299
I've never used it, and I'm not sure it's big enough for sunglasses, but that's the start.
Any Idea where I can get a new bed?
Here is a link to their site where you can get things from new beds to nozzles an more for the adventure 3.
flashforge-usa.com/collections/adventurer-3-parts-accessories
@@SeducedMonk3y Thanks
@@VictorRodriguez-jf4wy you're welcome
Hi Ed... do you have a public email address? I would like some drone advice and would like to ask via email instead of here. Thanks.
ive never seen the point in these printers. They print stuff you generally you don't want or need and often with defects. Am i missing something? they are relatively, large, expensive etc. whats the point?
They don't print anything unless you program them to. So if you're printing stuff you don't want or need, that's on you.
@@EdRickerVlogs yeah i got ya Ed. Suppose im more of a drone fan like you are :) when are seeing more drone reviews, tests etc?
poketfull actually 3d printers can help and be a part of other hobbys like drone flying, you can print new propellers, drone legs, and other plastic parts and you can also print whole frames of drones to add your own electronics
I find lots of use for them. Fixing things around the house is a big one. Small support parts for my fridge's electronics, a broken hinge for a toilet's flusher... now I'm building a flight sim and modeling parts for a Cessna cockpit. Projects and use are endless. :)
Great starting video. Just got the A3 yesterday. But still didn't know when to stop feeding the filament. I pushed it all the way to the extruder and after printing the box, I couldn't get it off (had to take an surgical knife to it (only thing I had lying around).