@billysproger690 ok. That's what I thought. All he talks about is how he is the best ect amd he do 24k Cubans. So I paid around 3k ish over as a premium.... He tells me *it's a preference *and* I should be happy with the links* lol. Like would you pay 10k for that bracelet if you seen it in a store ? I wouldn't
@@MehhhBushka Yea no it looks messed up, you payed for a 1st quality handmade item and that looks like it shouldn't have passed inspection. You absolutely deserve a full refund or have him completely remake the lock at his expense
@billysproger690 he's the inspector, lol. And I'm being too picky. Pure madness to me. Don't talk the talk, if you can't put out a great product. Looks like ppl will pst their stuff now, thanks to me. All shall see his work and decide if it's worth it.
I agree that's a badly made lock I would of thought he would of offered to do a whole new lock free of charge . Surprising they let this pass it's a mess. You done the right thing to post it here and let people know
@blairmarriott3737 They. Lol He told me , he overlooked it and sent it out as is. His fix was a refund that would lose me 1,7500. Or to shave it and I would lose gold. So he would profit from his f up. Thanks. I was hopping for him to re solder the walls
@MehhhBushka They still have time to have a change of heart and do a new lock he might if he sees your video and the attention it's getting . It would be the right thing to do
Just keep it and wear it. As long as it’s secure and won’t loosen you’ll be fine….. if you send it back you will lose value on them shaving down some gold especially on a 24k piece or fees& shipping etc.
I bought a silver bracelet from gus villa it was marked .999 had it analyzed and it came back .926 not sure if you have had your bracelet verified or not but it seems marks don't mean anything
My 22K chain came 2grams short, been over two weeks still trying to get my refund. The box-lock had imperfections (small dents/scratches on it and the GVJ stamping wasn't stamped properly. I paid 2.1K in import taxes just to get the chain into Canada too
@@MehhhBushka Just a partial refund for the missing gram weight, been over 2-3 weeks and I haven't gotten my chump change back yet. I'm not returning the chain after paying $2100 in import taxes lol I uploaded a short video showing the box-lock on my chain. Mine isn't bad compared to yours. I don't get how their quality control people even sent out your bracelet
@@MehhhBushka3k in labor is absolute robbery, and yes he did a horrible job. I would have DJI Remake the box lock for you in 22k gold for strength and move on from ever doing business with GV ever again. Sucks you have to come out of pocket more money but you’ve already invested so much in that piece and I would not wear it looking like that.
@chrishenry9540 it is what it is. It'll be around 500 because of shipping if I go with Daniel. But I'm gonna have 9999 male me more stuff, so I'll probably have them cut it off and put an S clasp on . Use the box lock as melt in my other peaces. Save 500 and don't take any more risk. Rather, use 500 towards a stock that I like that's super cheap right now.
You could saw it off and get it cast into a sleek lock by casters specificaly for jewellery, then go to your local jeweler and get them to piece it together. Would maybe cost you about 100-200$ and almost no loss in material. Thats what my casters charge per cast, about 200$ but im pretty sure its cheaper in the US (you could also cast it into the same lock but a perfected version, or any other lock)
@kyokushin2229 I like the box lock. With shipping and labor new walls. 400-500. Or when I order more from 9999 , I'll have them put a S clasp and extra gold to my other items. Just anyoing that he brags about his work and can't even Solder lol
@consumer1073 yea. I'm either gonna fix the boxlock or when I put in my next order with ....... there said they would put a S* clasp on it. But I like the boxlock, so it's tricky. I just 💯 % the ...... company won't mes up tho. It's like peace of mind.
@@MehhhBushka maybe hire a good company to melt the lock and remake it? youll lose cash no matter what sadly unless you melt the lock and make an S clasp yourself
@consumer1073 ...... said he can fix it and make it even. . ........ said they can add a S clasp. So I gotta decide what I wanna do. I'm gonna have .9999 make some more stuff in January. I just like the boxlock. So it sucks. Or save the cash and live it. It's just so ugly and stands out. I learned my listen.
@@MehhhBushka just get the box lock i like them too be up front with daniels and they should do you good. im with you, box locks are hot, theyre a big point of the miami cuban style if i was into s clasps on them id just get a thai cuban
@shastylesdesign yea. I got fooled. It's 3-4 males and one girl pushing Gus. Really never use their own cash, expect the girl...like sponsored adds. Sucks. Well ppl can now see, what you get for 10k and is it worth it. Thanks.
@michaelwagner8842 he told me it would bend down over time lol that doesn't fix the solder job. Plus I only wear jewelry like 4 times in a year ... Just to * flex * at my watch AD , when I go in. Lol , to piss them off. Yea a Shave ( loss gold ) was his fix. And je keeps the gold lol. Wtf. Daniel said he can redo the walls for around 200ish , but then you add shipping and thats around 4-500. So I'm just waiting.
@shastylesdesign thanks to late for me. I don't have that kind of money to purchase 24k Cubans from everyone... hopefully, someone will see your post..
I recently watched Gus's latest video and couldn't resist leaving feedback in regards to your order from HIM. However, it seems he wasn't as thrilled with the feedback as I expected. In fact, he ended up deleting some of his own comments, as well as several from other viewers that were left in response. It was quite a scene, and honestly, I found it pretty amusing! 😂😂😂 You all should definitely check it out!
@billysproger690 nothing with it yet. Just left as is. All my money are in Leap call contracts , the market is in a melt up. So I'm just doing that. When I get my next chain. I'll have it fixed or do a S clasp. Thanks for asking.
After watching the entire video I think that I'd be pretty hurt if I was in your shoes. Paying all that money and having such a high expectation only to get a piece that isn't as good as everybody else's would make me feel cheated and used. The links do look great, but the bracelet sits terribly and that would drive me nuts. I really hope you find a solution that brings the happiness that you deserve with a piece like this. Thank you for the eye opening review.
@JayBirdNJ. I had zero expectations... just don't fuck it up. Do what you say you can do. ... he did not do what he said he would do. So the video shows the craftsmanship you get from him. I got griffted. It is what it is.
If he’s not willing to remake it fuck that man I would take it to someone else and see how much they would charge to fix it that’s not very good craftsmanship I wouldn’t be happy either especially spending that much with them I wouldn’t spend no more with them
@stereotypical2650 it's 500 to fix , becasue of shipping. But I'm gonna see if I can just cut it off and do a S clasp and use that extra gold to me next chain with 9999. Yea, gus is con
@DRays813 they did not offer that. I would have, if so. He offered to shave it ( keep the gold ) or a refund and I would lose gold value and pay a Restocking fee.
@getem-chi8321 Yea, I found 2 bad customer reviews after. Then, one of his boys. Bixtrox or something, I don't know how to spell the name. Did a review gold over silver and was talking shit about the boxlock job and goes. Thank god it's not solid gold, lol.
He needs to fix the box lock at his own expense, i cannot see how it is even a discussion. No other reputable jeweller would do this and not fix it . I recommend Daniel’s jewlery inc for anything in the future i have several pieces made by them always fix their mistakes in rare instances they have some. Good luck
@CS-cs7gt his fix was - refund. I lose gold value and restock fees. So -1,750. Another solution was to shave it down , so I lost 4-6g's of gold, and he kept the gold. Wtf. Dainel said he could fix it by redoing the walls. With shipping, that will cost 400-500. I don't wanna lose gold, tho. Nor wasit money. With trump in ( good if you own things ) , we are in hyper inflation, and every extra dollar needs to go into stocks/ gold / crypto. So, no more business from me on petty purchases... Yea, he's a fing grifter. He told me I was being too picky. Like what the ....
28 дней назад+1
Damn, sorry this happened to you, now I know not to go with for my handmade Cuban. They should offer you a new chain since how bad they messed it up!!!
That's why I posted. All his videos are BS. He pretty much refused to redo it.. he offered to shave it, and he keeps the gold ? Lol. There is a refund, and there is a 10% restock fee. Plus, at that time, gold went up. So I would lose 1,750 dollars. It made no sense. He explained to me, I'm too picky.
16 дней назад+1
@@MehhhBushka Yeah that's some real BS.. So sorry too hear about your situation tho man.
I would personally either get a s clasp or those small lobster clasp due to the karat of the jewellery my 22k gold necklace has those small spring lobster clasp its asian (indian) gold btw. Most of my gold jewellery have a small spring lobster clasp
Dude, I’m not going to lie. This made me quit watching his videos! I’ve never made a purchase with him. I’m pretty dedicated to who I buy from, but this is just shotty! I really don’t understand how they gave you that bracelet in confidence! You definitely are not being too picky when you pay a premium, you have certain expectations, if they can’t meet those expectations there’s a problem! at least you got it in 24 karat, and you have that gold weight
@TheGunSmith614 I collect coins. So I always have weight, lol. It doesn't matter if it is 14-24k. You still are paying a premium.. the weight will always be there. It could be 20mm 14k with the same amount of gold. Due to his shit work. It has zero resale value. it's worth scrap and -10% spot. He said he looked it over and thought it was good. The guy is a grifter. Thanks 😊
I personally wouldn’t care that much to be honest but that’s just me I think small imperfections give it character and if I wanted something perfect I’d get a machine made one from Italy.
@lukeand98 you pay a premium to have it made even. Are you gonna purchase a house on an angle ? Or would that be just charter, too? If I paid bullion price, I wouldn't care or scrap price. I paid 3k for someone who said they can do a correct job. Maybe it's just me. My car doesn't have frame damage, but if I want a discount on one. I'll get one with a savage title. Would you buy this in a store ? I would not. I can't even sell it at spot later on in life. It's melt value peace, because of that 2mm. It's like buying a watch with *no papers * you never do that, unless it's before 2004. Then it's OK. Because you lose 10-30% value on the watch / no papers. Ect ect ect.
@@MehhhBushka hey man I’m just saying I think it still looks awesome, I’m sorry you’re not happy with it though I hope you’re able to resolve the issue. And yes i spent 20 thousand on a gold chain all 18k and it came with some imperfections but what I was saying is I personally didn’t mind them. Wear your gold in good health my man, take care.
@lukeand98 @lukeand98 Thanks. Yea, I don't care about imperfections but solder / welding. If I got it at auction or a scrap pile. I wouldn't care. The fact I paid and got that. O well. I don't even wear my stuff. Being single and every lady is looking for a meal ticket 🎟, I go for the homeless vibe. How's the 18k look? 2030 8-11k oz. The asset must don't know about.
@ yeah I feel you, I guess if they were a small family business that said they would try their best and you got that but didn’t pay as much for labour it would be okay, but if they tell you they can make it perfect and they charge you for perfect then it should have been what you paid for. The 18k is nice bro, I’ve got a 18k Cuban with nugget feature links and a custom nugget box lock. And a 22k gold nugget pendant to go with it. I wear my stuff a lot so I prefer 18-22k for strength even though 24 has the best colour and density. And as for the ladies find a woman who doesn’t give a crap about gold or silver so she doesn’t try to pull one on you.
i thought he was good obviously for watching his videos he will show us what he wants us to see. but this just changes everything, i was actually thinking of buying from him. now i know i wont lol, with that customer service i don't think anyone will want to deal with him specially if he just dumped you after spending 10k, what can i expect if i buy a regular 2k 3k chain? he's not gonna care for sure.
@juanmontano6105 yea. Him and his 4 cunban chain chain channels show product that they haven't paid for that he lends out. He offered a refund ( 10% restcok fee + gold up and that was a day after I got the bracelet.. I would lose 1,750. He offered to shave it flat. I would lose 3.5-6 grams of 24k gold ) he Neverr offered to recdo the sides. Daniel told me he can put new sides on and make it even ......... he says you pay for premium work, lol my ass. He told me I should be happy with the links. Man, I got handmade boots, fewer flaws than this. But he's a Grifter- pushing lab stones, silver over gold, and 950 silver .. what 950. I can go on Etsy and have a .9999 silver cuban made. So then it will be at least worth scrap. Lol.
@juanmontano6105 Thanks for the positive 🙏 Freed bacl. My videos are to show what real ppl get when they spend around 10k. He charged. SPOT + 28% SO. That's. Total price gold * times * 1.28 = gus price. Do *times * 1. ( number of percent 5 10 20, ect ) to equal your out the door price. So when you shop around , ask the precent they will charge you on k* and grams # of good you wanna use. ... if your only spending 3k. Get a 1oz bange from apmex. And stack those over time. I put a video up of them.
@Johngottisentme thats my point for my video. I spent 10k on bracelet, told him. If it came out good, I would purchase 3 more items. Thank god I didn't.. I spent another 10k with .999 for that ancor chain. And will be doing another bracelet 33g necklace 100g and 2 17g rings. From probably. 9999. Jewelr and have them cut the f Ed boxlock off and put a S clasp on.
@mcboosting1273 even if he didn't charge a 10% fee. Gold price moves. So a refund would be gram24k weight *times* 28% manufacturing cost = refund. Or just redo the box lock correctly, ect ect. He offered to shave it down, lol. And what? Keep the extra gold. Yea, ok. The guy is shity.
@gabe408sj Gus said he could do it. He also said that he used less k* gold the the lock. If that's the case. Then he grifted more money from me. Because I payed for 96 , came 94 and if the box is 21k then I'm around 90g of 24k. It was a rookie mistake on the solder job.. one side is even. The other side is way off
@@MehhhBushka Thats even more ridiculous wtf. he grifted you by using less k gold on the lock (to make it easier for him i assume) and its STILL shiitty like that?? hell no
@billysproger690 if you say you can make a cuban and a box lock. Then, they should be able to solder. I have not gotten it tested. But he first said he would use a les *k on the boxlock. If so, that is for the strength. Regardless, that would not affect the amature hour box lock. It's a solder. It's an even line. It's not rocket science, lol. Yea and I paid for 96g, then that got changed to 94g, and if the box lock is 21k, then he shaved acouple $$$ more in his pocket... it is what it is. 🤷 that's why I told him 96g to make up the difference of the purity, so I would have 3 Troy Oz's. 🙄 ooo well. I had it planned out and went with him because he said he could do the job and brags about it on youtube. Meh meh meh. 😐
@LxTxSURGE true. I told him I didn't need a polish. Also ordered 96g , he gave 94g and 120bucks back. Wtf. Then, on the solder job, he told me to send it back so he buff/ over polish that spot to slim I'd down, in tr stead of redoing the solder. That would be 4-6g of 24k lost, lol. Grifter.
@BillJenkins-q8r when I talked to him again , he said that offer was of the table. That would net a 2k loss to me. Yea, I'm gonna have it fixed when I get the funds to so. It really sucks. Rather, I have just added more coins to my stack instead of this..
@TheGunSmith614 yea. I just haven't been out to get it tested. If a company uses a fake stamp. That's big lawsuits. Plus I have 24k stuff. The color dents scratches is correct.
@@MehhhBushka either leave it alone or change the lock. It's very soft gold and I never polish my gold it takes off a little every time you do that. And those locks over time can lose tension on the tongue side. If it long enough just slip it over your head to take it on and off.
@jzavala366 and he uses 925 950 silver. Not pure .999 silver. You can get .999 silver cubans hand made from etsy. You want pure, so at least you will have melt value :) 10oz .999 silver should make a 23in 10mm chain. At today's price you would have at least 300 in .999 silver. As melt value
@@MehhhBushka Appreciate you bringing awareness. I was gonna grab a bracelet from them, but after seeing this, I'll pass. I believe it's cultural for him to point out for you to love the links and not pay no mind to the botched box lock.
@rross7999 I get hand-made boots. They are not even flawed like this, lol. Yea, cultural as cheap and poor job. When you hear handmade stuff. You expect the best quilty someone can do. He's amture hour. Found moe videos like mine of his shity work. Thanks.
I think you’d be way too picky. I would never notice that in 1 million years plus because it’s 24 karat it’s gonna get scuffed and dented to hell in about a week on a bracelet. I think you’re just over analyzing stuff and you can’t make a box lock in 24 karat cause it would lose tension after like a day
@josephmandarino2199 they make it under k* it's a solder job that's wrong. That's because of an unskilled employee/ rushed. Picky for something that is not even ? Well they got one side correct, so I guess that's OK. They tried.
@ima_robot91 dam yea. He kept telling me *it's a preference thing, not a issue * then why is one side even and the other not. Man, what a grifter. 3k to have it made. Likes a 400.00 job at best.
@@MehhhBushka so it’s a preference to want the jewelry you paid 3k for to look good? Strange🙄 it’s really not noticeable to anyone who’s not scrutinizing it, but I totally understand where you’re coming from. If you’re spending the money on a gold Cuban you’d atleast expect everything to look uniform. They rushed it.
@ima_robot91 yup. You pay a certain amount for a product. I would only purchase this at *spot price* rather have coins then a *rushed job. Well, now ppl will see what they can get. So it's toss up with gus. He messed up two 10k projects, crazy. Won't last long, with ppl not having income and gold starting a run to 8-12k oz 2030.
@PhiloTheGod a lot of ppl. He makes videos of him making chains 24k. Brags, he's the best. Clearly, it's an amature hour when it comes to doing a solder job.
Man, I might be retarded- but I just dont see how its that bad. I have a Daniel Jewelry 10mm bracelet and a Lirys 13mm bracelet and I feel like they both look the same. And the box locks always fall under my wrist. For 24k gold and what you paid I think you have every right to question the manufacturer but im just not seeing how its a terrible job. Let me know if Im crazy!! I have all my pieces on my YT page, 14k tho not 24k. I swear they all got flaws lol. I would be more concerned with the box locks itself holding tension over this!!
@jjax633 it's angled up 2mm on a solder job. That's like buying shoes and one is a size 9 and other is 9.5. Or a shirt wear the length is 27in on L and angles down 28in on R. Are your shelfs in your house even ?? Do you purchase a car with a straight frame? Or do you go for frame damage, for a discont? Did they lay your roof properly? Or do you water coimg in.
@jjax633 I seen your video. Solders look even.. Are they even on one side and 2-3mm angled up not even on the other?? That's my problem. Poor craftsmanship/ quiltycontrol and his only fix was a refund , that I lose 1,750 or he shaves it down and I lose 4-6g 24k gold. So he profits on his F up. Dianle said he could fix it. It's the walls that have to redone.
@jjax633 flaws are OK. It's had made. A solder job that's not even / leveled is bad Craftsmanship. If you had 10k in pocket and seen this in person. Would you purchase it, with that issue ? It's only worth scrap, unless fixed.
@rickybobby5161 Yea. Its like Two-Face from batman. Depending on the side, lol. Under paid staff, rushed.. it's 2024 , he said the buff and links looked nice..... so 85% is all good. Be happy. Lol. I week two damage projects get sent out to customers. Then he makes a grill, lol. We'll he did net 5-6k profit from us, with his bad work. Great 👍 I'm not being to picky. He said it was my visual preference lol.
@MehhhBushka brother, with all due respect there's picky and flat out unacceptable. Not trying to make you feel worse than you already do but he 100% needs to eat this as a loss and do the right thing. Gonna keep this in mind next time someone asks about him
@rickybobby5161 He did offer a shave. A refund ( site says 10% restock ) . Buy the time I texted him back. He said it's off the table because it was 7 days. But his site says 10 days. I stated to him that I did not want a shave nor a refund. Just for him to make correct. It is what it is. I tried to watch all the cuban videos out there, and he kept popping up with 24k chains, stating he can do the job. Shit happens in the house, and you fix in house, before it gets sent out. Anyways. Thanks 😊 for the feedback.
Brother or u could hit him up send it back and talk otp instead of making videos u ever thought ab that if u did well he must not have Cared ab yo order to much 😂
@Jordan-hd5fv I did talk to him. He offered a refund, and I would lose 1,750 dollars. He offered to shave it, and I would lose weight, aka gold. I do care about my order and will get it fixed with out losing weight, and that will cost me around 400.
@erod235 so I spent 2,800 dollars over spot to have gus make it. Now, if you see a piece of jewelry with a solder job that bad in person. Would you buy it like that. ??? I would bet you wouldn't. If you paid for braces or got your lady a boob job. Would you like straight teeth and same cup breast? Maybe you're that guy with 3 tires full air pressure, with one flat and riding that way. I also use stud finder and level when I'm doing work in my house. I guess shoty work is what you enjoy. Best of luck with that. Definitely go with Gus, then.
@ 🤣 right my guy!! It’s a good chain it’s not that serious! Only broke people looking for a discount complain about the small stuff! It’s a handmade piece appreciate the art, you want perfection pay the big boy price and get the machine made price💯🤣🫵🏽
@erod235 big boy price is hand made. A bad solder job is due to a lack of effort or new to the job. You can't get 20k-24k in the machine. I paid over the big boy price at 28% for a quitly job. Peaces like this are 22% over. Dropping 10k on a chain. You expect good craftsmanship. I never asked for a discount, and I asked him to redo it/ fix the boxlock. He refused that. I get a lot of handmade items, but I have never ever had poor craftsmanship. Lol and looking for a discount ?? F that. What would I do with 100 bucks. Purchase a pizza or something. Hahaha. Yea ok.
@jreviews5924 500. I'll fix it when I have free cash flow. Right now , the dollar is being devalued, so melt up in stocks and hard commanties. So when they drop the proce fo fix , do a lack of business. That's when I will. Gus has been the worst person to deal with.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
No bro your not being too picky that looks bad especially for someone who prides themselves in the best handmade Miami Cubans
@billysproger690 ok. That's what I thought. All he talks about is how he is the best ect amd he do 24k Cubans. So I paid around 3k ish over as a premium.... He tells me *it's a preference *and* I should be happy with the links* lol. Like would you pay 10k for that bracelet if you seen it in a store ? I wouldn't
@@billysproger690 thanks 😊
@@MehhhBushka Yea no it looks messed up, you payed for a 1st quality handmade item and that looks like it shouldn't have passed inspection. You absolutely deserve a full refund or have him completely remake the lock at his expense
@billysproger690 he's the inspector, lol. And I'm being too picky. Pure madness to me. Don't talk the talk, if you can't put out a great product. Looks like ppl will pst their stuff now, thanks to me. All shall see his work and decide if it's worth it.
I agree that's a badly made lock I would of thought he would of offered to do a whole new lock free of charge . Surprising they let this pass it's a mess. You done the right thing to post it here and let people know
@blairmarriott3737 They. Lol He told me , he overlooked it and sent it out as is. His fix was a refund that would lose me 1,7500. Or to shave it and I would lose gold. So he would profit from his f up. Thanks. I was hopping for him to re solder the walls
@MehhhBushka They still have time to have a change of heart and do a new lock he might if he sees your video and the attention it's getting . It would be the right thing to do
@blairmarriott3737 He has then. He said I was being to picky and should be happy that the links look good. Lol.
Just keep it and wear it. As long as it’s secure and won’t loosen you’ll be fine….. if you send it back you will lose value on them shaving down some gold especially on a 24k piece or fees& shipping etc.
I bought a silver bracelet from gus villa it was marked .999 had it analyzed and it came back .926 not sure if you have had your bracelet verified or not but it seems marks don't mean anything
@bobbyc1705 True. Not yet, I forgot to do it last time I was out. I'll have checked soon.
How u got it analyzed make me wanna do mine now since yrs came back .926
@AccentBwoy huh. ? .926 is silver. I ordered 24k gold.
My 22K chain came 2grams short, been over two weeks still trying to get my refund. The box-lock had imperfections (small dents/scratches on it and the GVJ stamping wasn't stamped properly. I paid 2.1K in import taxes just to get the chain into Canada too
@@chingisk4377 dam. Post a detailed video
@chingisk4377 dents and scratches are OK on 22-24k. The solder needs to be done correctly tho. What did you pay. Weight. Length mm.
@@MehhhBushka I paid a little under 10K for 22K, 91grams 6mm 22". and then an additional 2.1k import taxes so total about 12K lol
@chingisk4377 post a video. Ppl need to see his work. Same. I paid around 10k. A full refund? You he takes 10% from that
@@MehhhBushka Just a partial refund for the missing gram weight, been over 2-3 weeks and I haven't gotten my chump change back yet. I'm not returning the chain after paying $2100 in import taxes lol
I uploaded a short video showing the box-lock on my chain. Mine isn't bad compared to yours. I don't get how their quality control people even sent out your bracelet
3k in labor is also insane !!!!! DJI does it for around $700-1000
@chrishenry9540 found out too late. Daniel is 14% over gold, so 1200. Gus charged 28% over gold and did a shit job.
@@MehhhBushka3k in labor is absolute robbery, and yes he did a horrible job. I would have DJI Remake the box lock for you in 22k gold for strength and move on from ever doing business with GV ever again. Sucks you have to come out of pocket more money but you’ve already invested so much in that piece and I would not wear it looking like that.
@@MehhhBushkaI have a 22k 10mm bracelet from DJI on my RUclips and it’s immaculate.
@chrishenry9540 it is what it is. It'll be around 500 because of shipping if I go with Daniel. But I'm gonna have 9999 male me more stuff, so I'll probably have them cut it off and put an S clasp on . Use the box lock as melt in my other peaces. Save 500 and don't take any more risk. Rather, use 500 towards a stock that I like that's super cheap right now.
@chrishenry9540 you should make a new video. Titled this is how a Daniel box lock looks on 22k. Lol. Screw Gus the grifter
You could saw it off and get it cast into a sleek lock by casters specificaly for jewellery, then go to your local jeweler and get them to piece it together. Would maybe cost you about 100-200$ and almost no loss in material. Thats what my casters charge per cast, about 200$ but im pretty sure its cheaper in the US (you could also cast it into the same lock but a perfected version, or any other lock)
@kyokushin2229 I like the box lock. With shipping and labor new walls. 400-500. Or when I order more from 9999 , I'll have them put a S clasp and extra gold to my other items. Just anyoing that he brags about his work and can't even Solder lol
i'd pissed if i paid 10k for that and got told "get over it"
would rather get an asian 23/24k chain
@consumer1073 yea. I'm either gonna fix the boxlock or when I put in my next order with ....... there said they would put a S* clasp on it. But I like the boxlock, so it's tricky. I just 💯 % the ...... company won't mes up tho. It's like peace of mind.
@@MehhhBushka maybe hire a good company to melt the lock and remake it? youll lose cash no matter what sadly unless you melt the lock and make an S clasp yourself
@consumer1073 ...... said he can fix it and make it even. . ........ said they can add a S clasp. So I gotta decide what I wanna do. I'm gonna have .9999 make some more stuff in January. I just like the boxlock. So it sucks. Or save the cash and live it. It's just so ugly and stands out. I learned my listen.
@@MehhhBushka just get the box lock i like them too
be up front with daniels and they should do you good. im with you, box locks are hot, theyre a big point of the miami cuban style
if i was into s clasps on them id just get a thai cuban
@consumer1073 That's what I'll do, is try to save it. Penny pinched to get the bracelet, now gotta pennie pinch to fix it lol f*ing life.
That would irk me too...smh sucks youre going through this...thanks for the heads up and honest video
@shastylesdesign yea. I got fooled. It's 3-4 males and one girl pushing Gus. Really never use their own cash, expect the girl...like sponsored adds. Sucks. Well ppl can now see, what you get for 10k and is it worth it. Thanks.
I’m perplexed that he didn’t offer to fix it for free. Hell I can fix that without losing any gold in the process. 🤦♂️
@michaelwagner8842 he told me it would bend down over time lol that doesn't fix the solder job. Plus I only wear jewelry like 4 times in a year ... Just to * flex * at my watch AD , when I go in. Lol , to piss them off. Yea a Shave ( loss gold ) was his fix. And je keeps the gold lol. Wtf. Daniel said he can redo the walls for around 200ish , but then you add shipping and thats around 4-500. So I'm just waiting.
Why are they doing box lock with 24k? They should of just made an "S" clasp, more easier to operate especially at 24k.
Reys Gold is AMAZING - Their customer service and quality is top notch
@shastylesdesign thanks to late for me. I don't have that kind of money to purchase 24k Cubans from everyone... hopefully, someone will see your post..
@ shit man yea that sucks bro🥴🥴🥴🤦♂️
@@MehhhBushkaTrade it in.
They’ll Give you a Good Price.
Telll them your Situation.
Norma Would work with you .
@LouieRodriguez92 ok. I'll ask. I'm already 3k in labor. At was the most I was willing to be over in gold. So it sucks.
Came here to say this…Rey’s is the standard
I recently watched Gus's latest video and couldn't resist leaving feedback in regards to your order from HIM. However, it seems he wasn't as thrilled with the feedback as I expected. In fact, he ended up deleting some of his own comments, as well as several from other viewers that were left in response. It was quite a scene, and honestly, I found it pretty amusing! 😂😂😂 You all should definitely check it out!
@@Kevin-jk8zb what is the video titled. ??? Lol
@MehhhBushka the latest video he uploaded 😂
@Kevin-jk8zb I'm posting on it now. Lol 😆
What did you end up doing?
@billysproger690 nothing with it yet. Just left as is. All my money are in Leap call contracts , the market is in a melt up. So I'm just doing that. When I get my next chain. I'll have it fixed or do a S clasp. Thanks for asking.
@@MehhhBushka i would call my bank n report fraud
@AccentBwoy how. When you deal with gold and stuff like this. It's bank wires.
After watching the entire video I think that I'd be pretty hurt if I was in your shoes. Paying all that money and having such a high expectation only to get a piece that isn't as good as everybody else's would make me feel cheated and used. The links do look great, but the bracelet sits terribly and that would drive me nuts. I really hope you find a solution that brings the happiness that you deserve with a piece like this. Thank you for the eye opening review.
@JayBirdNJ. I had zero expectations... just don't fuck it up. Do what you say you can do. ... he did not do what he said he would do. So the video shows the craftsmanship you get from him. I got griffted. It is what it is.
That is not a hand made chain you can still see the holes from being cast under the links. Horrible rushed job.
@@Rx7_T51R explain, so I can see this
Wrong
@andremora2965 hand made shit.
If he’s not willing to remake it fuck that man I would take it to someone else and see how much they would charge to fix it that’s not very good craftsmanship I wouldn’t be happy either especially spending that much with them I wouldn’t spend no more with them
@stereotypical2650 it's 500 to fix , becasue of shipping. But I'm gonna see if I can just cut it off and do a S clasp and use that extra gold to me next chain with 9999. Yea, gus is con
@MehhhBushka have Daniel's jewelry fix it for you I'm sure they will help for less then that love my ring from them
@lamontgray6015 I talked to them. It's about 400-500 to fix Gus poor job
Easy solution. Send it back and they should make a new one same size and weight. No charge. Top notch customer service. Simple
@DRays813 they did not offer that. I would have, if so. He offered to shave it ( keep the gold ) or a refund and I would lose gold value and pay a Restocking fee.
@ Sorry dude. Your concern is justified. Video helps others make more informed decisions on whom they do business with. Thanks for sharing
@DRays813 thanks. Yea, he said I was to picky. Wtf. Now ppl can see what you get , when you order and not to believe his videos. Thanks.
I was about to buy from gus but this just made me look elsewhere. Dodged a bullet thanks.
@getem-chi8321 Yea, I found 2 bad customer reviews after. Then, one of his boys. Bixtrox or something, I don't know how to spell the name. Did a review gold over silver and was talking shit about the boxlock job and goes. Thank god it's not solid gold, lol.
He needs to fix the box lock at his own expense, i cannot see how it is even a discussion. No other reputable jeweller would do this and not fix it . I recommend Daniel’s jewlery inc for anything in the future i have several pieces made by them always fix their mistakes in rare instances they have some. Good luck
@CS-cs7gt his fix was - refund. I lose gold value and restock fees. So -1,750. Another solution was to shave it down , so I lost 4-6g's of gold, and he kept the gold. Wtf. Dainel said he could fix it by redoing the walls. With shipping, that will cost 400-500. I don't wanna lose gold, tho. Nor wasit money. With trump in ( good if you own things ) , we are in hyper inflation, and every extra dollar needs to go into stocks/ gold / crypto. So, no more business from me on petty purchases... Yea, he's a fing grifter. He told me I was being too picky. Like what the ....
Damn, sorry this happened to you, now I know not to go with for my handmade Cuban.
They should offer you a new chain since how bad they messed it up!!!
That's why I posted. All his videos are BS. He pretty much refused to redo it.. he offered to shave it, and he keeps the gold ? Lol. There is a refund, and there is a 10% restock fee. Plus, at that time, gold went up. So I would lose 1,750 dollars. It made no sense. He explained to me, I'm too picky.
@@MehhhBushka Yeah that's some real BS.. So sorry too hear about your situation tho man.
I would personally either get a s clasp or those small lobster clasp due to the karat of the jewellery my 22k gold necklace has those small spring lobster clasp its asian (indian) gold btw. Most of my gold jewellery have a small spring lobster clasp
@shaz4179 those springs aren't me. It doesn't fit my style. Thanks 😊 tho
Dude, I’m not going to lie. This made me quit watching his videos! I’ve never made a purchase with him. I’m pretty dedicated to who I buy from, but this is just shotty! I really don’t understand how they gave you that bracelet in confidence! You definitely are not being too picky when you pay a premium, you have certain expectations, if they can’t meet those expectations there’s a problem! at least you got it in 24 karat, and you have that gold weight
@TheGunSmith614 I collect coins. So I always have weight, lol. It doesn't matter if it is 14-24k. You still are paying a premium.. the weight will always be there. It could be 20mm 14k with the same amount of gold. Due to his shit work. It has zero resale value. it's worth scrap and -10% spot. He said he looked it over and thought it was good. The guy is a grifter. Thanks 😊
No hate just an opinion, but that lock looks like total dog shit. Dents scratches crooked not cool man especially for what you paid ❤️❤️❤️❤️
@ryancarson4528 that's why I posted it. To show you what GUS really sends out. His video are hyped lies. Trust me. I know it looks like shit
I personally wouldn’t care that much to be honest but that’s just me I think small imperfections give it character and if I wanted something perfect I’d get a machine made one from Italy.
@lukeand98 you pay a premium to have it made even. Are you gonna purchase a house on an angle ? Or would that be just charter, too? If I paid bullion price, I wouldn't care or scrap price. I paid 3k for someone who said they can do a correct job. Maybe it's just me. My car doesn't have frame damage, but if I want a discount on one. I'll get one with a savage title. Would you buy this in a store ? I would not. I can't even sell it at spot later on in life. It's melt value peace, because of that 2mm. It's like buying a watch with *no papers * you never do that, unless it's before 2004. Then it's OK. Because you lose 10-30% value on the watch / no papers. Ect ect ect.
@lukeand98 24k is hand-made. No Italy machine bs, other wise I would have sourced that.
@@MehhhBushka hey man I’m just saying I think it still looks awesome, I’m sorry you’re not happy with it though I hope you’re able to resolve the issue.
And yes i spent 20 thousand on a gold chain all 18k and it came with some imperfections but what I was saying is I personally didn’t mind them.
Wear your gold in good health my man, take care.
@lukeand98 @lukeand98 Thanks. Yea, I don't care about imperfections but solder / welding. If I got it at auction or a scrap pile. I wouldn't care. The fact I paid and got that. O well. I don't even wear my stuff. Being single and every lady is looking for a meal ticket 🎟, I go for the homeless vibe. How's the 18k look? 2030 8-11k oz. The asset must don't know about.
@ yeah I feel you, I guess if they were a small family business that said they would try their best and you got that but didn’t pay as much for labour it would be okay, but if they tell you they can make it perfect and they charge you for perfect then it should have been what you paid for.
The 18k is nice bro, I’ve got a 18k Cuban with nugget feature links and a custom nugget box lock. And a 22k gold nugget pendant to go with it.
I wear my stuff a lot so I prefer 18-22k for strength even though 24 has the best colour and density.
And as for the ladies find a woman who doesn’t give a crap about gold or silver so she doesn’t try to pull one on you.
i thought he was good obviously for watching his videos he will show us what he wants us to see. but this just changes everything, i was actually thinking of buying from him. now i know i wont lol, with that customer service i don't think anyone will want to deal with him specially if he just dumped you after spending 10k, what can i expect if i buy a regular 2k 3k chain? he's not gonna care for sure.
@juanmontano6105 yea. Him and his 4 cunban chain chain channels show product that they haven't paid for that he lends out. He offered a refund ( 10% restcok fee + gold up and that was a day after I got the bracelet.. I would lose 1,750. He offered to shave it flat. I would lose 3.5-6 grams of 24k gold ) he Neverr offered to recdo the sides. Daniel told me he can put new sides on and make it even ......... he says you pay for premium work, lol my ass. He told me I should be happy with the links. Man, I got handmade boots, fewer flaws than this. But he's a Grifter- pushing lab stones, silver over gold, and 950 silver .. what 950. I can go on Etsy and have a .9999 silver cuban made. So then it will be at least worth scrap. Lol.
@juanmontano6105 Thanks for the positive 🙏 Freed bacl. My videos are to show what real ppl get when they spend around 10k. He charged. SPOT + 28% SO. That's. Total price gold * times * 1.28 = gus price. Do *times * 1. ( number of percent 5 10 20, ect ) to equal your out the door price. So when you shop around , ask the precent they will charge you on k* and grams # of good you wanna use. ... if your only spending 3k. Get a 1oz bange from apmex. And stack those over time. I put a video up of them.
Glad I read this comment. Was about to buy a 2.8 k chain
@Johngottisentme thats my point for my video. I spent 10k on bracelet, told him. If it came out good, I would purchase 3 more items. Thank god I didn't.. I spent another 10k with .999 for that ancor chain. And will be doing another bracelet 33g necklace 100g and 2 17g rings. From probably. 9999. Jewelr and have them cut the f Ed boxlock off and put a S clasp on.
Looks like defect should be exchanged for a new one or full refund with no fee.
@mcboosting1273 even if he didn't charge a 10% fee. Gold price moves. So a refund would be gram24k weight *times* 28% manufacturing cost = refund. Or just redo the box lock correctly, ect ect. He offered to shave it down, lol. And what? Keep the extra gold. Yea, ok. The guy is shity.
This is why you never see box locks on 24k gold jewelry 😂😂 it’s always a S clasp never box lock rookie mistake
@gabe408sj Gus said he could do it. He also said that he used less k* gold the the lock. If that's the case. Then he grifted more money from me. Because I payed for 96 , came 94 and if the box is 21k then I'm around 90g of 24k. It was a rookie mistake on the solder job.. one side is even. The other side is way off
@@gabe408sj also Gus advertises he can do 24k Cubans with boxlocks.
@@MehhhBushka Thats even more ridiculous wtf. he grifted you by using less k gold on the lock (to make it easier for him i assume) and its STILL shiitty like that?? hell no
@billysproger690 if you say you can make a cuban and a box lock. Then, they should be able to solder. I have not gotten it tested. But he first said he would use a les *k on the boxlock. If so, that is for the strength. Regardless, that would not affect the amature hour box lock. It's a solder. It's an even line. It's not rocket science, lol. Yea and I paid for 96g, then that got changed to 94g, and if the box lock is 21k, then he shaved acouple $$$ more in his pocket... it is what it is. 🤷 that's why I told him 96g to make up the difference of the purity, so I would have 3 Troy Oz's. 🙄 ooo well. I had it planned out and went with him because he said he could do the job and brags about it on youtube. Meh meh meh. 😐
That's just bad job. I've never had such solder work with my necklace or bracelets.
@@vincenthazelaar8679 yuppie. Gus the grifter.
probably polished it to remove gold off it 😂😂
@LxTxSURGE true. I told him I didn't need a polish. Also ordered 96g , he gave 94g and 120bucks back. Wtf. Then, on the solder job, he told me to send it back so he buff/ over polish that spot to slim I'd down, in tr stead of redoing the solder. That would be 4-6g of 24k lost, lol. Grifter.
Get your refund and stocking fee thats basically gold weight. Would never wear that
@BillJenkins-q8r when I talked to him again , he said that offer was of the table. That would net a 2k loss to me. Yea, I'm gonna have it fixed when I get the funds to so. It really sucks. Rather, I have just added more coins to my stack instead of this..
Get that tested I promise you
@@ChinggyBah why do you think it's fake 🤔
@@MehhhBushka I think he’s worried about the purity not being fake
@TheGunSmith614 yea. I just haven't been out to get it tested. If a company uses a fake stamp. That's big lawsuits. Plus I have 24k stuff. The color dents scratches is correct.
That cannot be real. Let me explain why. 24 karat chain would not be a 100 g 10 mm I would probably be like 5 mm if that gold is super heavy
@silverkidd237 it's 94g 10mm 8in bracelet. Why do ppl think 94g Is heavy. 250g is a nice weight for necklace
@ I thought necklace my bad
@silverkidd237 I have 96g 24in anchor 4.5mm. No worries
Next time go with CMG Links. Takes long but worth it.
@officeroinker440 no next time. I'm not spending another 10k on a cuban.
0:25
@@jorgemojica611 yea. You can see the bad job also at that point.
Filing that down you will be losing gold not good.
@@patrickmcdermott111 I know. That was his plan. To file. Instead of redoing it. Like a grift from every angel.
@@MehhhBushka either leave it alone or change the lock. It's very soft gold and I never polish my gold it takes off a little every time you do that. And those locks over time can lose tension on the tongue side. If it long enough just slip it over your head to take it on and off.
Same thing happened with my silver cuban. Really bad soldering. He said silver was finicky and were stress cracks lol offered to fix when it broke
@jzavala366 and he uses 925 950 silver. Not pure .999 silver. You can get .999 silver cubans hand made from etsy. You want pure, so at least you will have melt value :) 10oz .999 silver should make a 23in 10mm chain. At today's price you would have at least 300 in .999 silver. As melt value
Damn, that sucks bro
@rross7999 yea the 400 -500 fix. Cut it and put a S clasp instead or leave it. Sucks.
@@MehhhBushkaMy necklace from Grimal is literally perfect
@rross7999 nice. My videos are to show his work and make ppl aware of what he finds ok.
@@MehhhBushka Appreciate you bringing awareness. I was gonna grab a bracelet from them, but after seeing this, I'll pass. I believe it's cultural for him to point out for you to love the links and not pay no mind to the botched box lock.
@rross7999 I get hand-made boots. They are not even flawed like this, lol. Yea, cultural as cheap and poor job. When you hear handmade stuff. You expect the best quilty someone can do. He's amture hour. Found moe videos like mine of his shity work. Thanks.
I think you’d be way too picky. I would never notice that in 1 million years plus because it’s 24 karat it’s gonna get scuffed and dented to hell in about a week on a bracelet. I think you’re just over analyzing stuff and you can’t make a box lock in 24 karat cause it would lose tension after like a day
@josephmandarino2199 they make it under k* it's a solder job that's wrong. That's because of an unskilled employee/ rushed. Picky for something that is not even ? Well they got one side correct, so I guess that's OK. They tried.
@@MehhhBushkayou don’t pay them to try tho, your not being picky. It looks bad.
@ima_robot91 dam yea. He kept telling me *it's a preference thing, not a issue * then why is one side even and the other not. Man, what a grifter. 3k to have it made. Likes a 400.00 job at best.
@@MehhhBushka so it’s a preference to want the jewelry you paid 3k for to look good? Strange🙄 it’s really not noticeable to anyone who’s not scrutinizing it, but I totally understand where you’re coming from. If you’re spending the money on a gold Cuban you’d atleast expect everything to look uniform. They rushed it.
@ima_robot91 yup. You pay a certain amount for a product. I would only purchase this at *spot price* rather have coins then a *rushed job. Well, now ppl will see what they can get. So it's toss up with gus. He messed up two 10k projects, crazy. Won't last long, with ppl not having income and gold starting a run to 8-12k oz 2030.
Who buys 24k? 🤷 It's not Gus' fault 😂
@PhiloTheGod a lot of ppl. He makes videos of him making chains 24k. Brags, he's the best. Clearly, it's an amature hour when it comes to doing a solder job.
@MehhhBushka 24k gold is just ugly period & soft 😂 but to each is own
@PhiloTheGod it's not soft. .9999 silver is softer. Even on a soft medal. You should be able to solder evenly...
Man, I might be retarded- but I just dont see how its that bad. I have a Daniel Jewelry 10mm bracelet and a Lirys 13mm bracelet and I feel like they both look the same. And the box locks always fall under my wrist.
For 24k gold and what you paid I think you have every right to question the manufacturer but im just not seeing how its a terrible job. Let me know if Im crazy!! I have all my pieces on my YT page, 14k tho not 24k. I swear they all got flaws lol. I would be more concerned with the box locks itself holding tension over this!!
@jjax633 it's angled up 2mm on a solder job. That's like buying shoes and one is a size 9 and other is 9.5. Or a shirt wear the length is 27in on L and angles down 28in on R. Are your shelfs in your house even ?? Do you purchase a car with a straight frame? Or do you go for frame damage, for a discont? Did they lay your roof properly? Or do you water coimg in.
@jjax633 I seen your video. Solders look even.. Are they even on one side and 2-3mm angled up not even on the other?? That's my problem. Poor craftsmanship/ quiltycontrol and his only fix was a refund , that I lose 1,750 or he shaves it down and I lose 4-6g 24k gold. So he profits on his F up. Dianle said he could fix it. It's the walls that have to redone.
@jjax633 flaws are OK. It's had made. A solder job that's not even / leveled is bad Craftsmanship. If you had 10k in pocket and seen this in person. Would you purchase it, with that issue ? It's only worth scrap, unless fixed.
PAUSE PAUSE PAUSE...SOUR WHAT IN YO MOUTH??? THAT'S NASTY WORK RIGHT THERE LOL. YO BOX LOCK NEED A QUICK FIX AND YOU'LL BE GOOD
@@BeatmanGlaze yea at 500 cost more. F 8ng sucks . I'm already 2,800.00 into it over spot.
Thats god awful work
@rickybobby5161 Yea. Its like Two-Face from batman. Depending on the side, lol. Under paid staff, rushed.. it's 2024 , he said the buff and links looked nice..... so 85% is all good. Be happy. Lol. I week two damage projects get sent out to customers. Then he makes a grill, lol. We'll he did net 5-6k profit from us, with his bad work. Great 👍 I'm not being to picky. He said it was my visual preference lol.
@MehhhBushka brother, with all due respect there's picky and flat out unacceptable. Not trying to make you feel worse than you already do but he 100% needs to eat this as a loss and do the right thing. Gonna keep this in mind next time someone asks about him
@rickybobby5161 He did offer a shave. A refund ( site says 10% restock ) . Buy the time I texted him back. He said it's off the table because it was 7 days. But his site says 10 days. I stated to him that I did not want a shave nor a refund. Just for him to make correct. It is what it is. I tried to watch all the cuban videos out there, and he kept popping up with 24k chains, stating he can do the job. Shit happens in the house, and you fix in house, before it gets sent out. Anyways. Thanks 😊 for the feedback.
@@MehhhBushka I would be furious
@rickybobby5161 yup. That's why I post my videos of his craftsmanship.. I'll keep posting lol.
Brother or u could hit him up send it back and talk otp instead of making videos u ever thought ab that if u did well he must not have Cared ab yo order to much 😂
@Jordan-hd5fv I did talk to him. He offered a refund, and I would lose 1,750 dollars. He offered to shave it, and I would lose weight, aka gold. I do care about my order and will get it fixed with out losing weight, and that will cost me around 400.
Flat links kinks
Your being to picky! It’s not that serious!
@erod235 so I spent 2,800 dollars over spot to have gus make it. Now, if you see a piece of jewelry with a solder job that bad in person. Would you buy it like that. ??? I would bet you wouldn't. If you paid for braces or got your lady a boob job. Would you like straight teeth and same cup breast? Maybe you're that guy with 3 tires full air pressure, with one flat and riding that way. I also use stud finder and level when I'm doing work in my house. I guess shoty work is what you enjoy. Best of luck with that. Definitely go with Gus, then.
@ 🤣 right my guy!! It’s a good chain it’s not that serious! Only broke people looking for a discount complain about the small stuff! It’s a handmade piece appreciate the art, you want perfection pay the big boy price and get the machine made price💯🤣🫵🏽
@erod235 big boy price is hand made. A bad solder job is due to a lack of effort or new to the job. You can't get 20k-24k in the machine. I paid over the big boy price at 28% for a quitly job. Peaces like this are 22% over. Dropping 10k on a chain. You expect good craftsmanship. I never asked for a discount, and I asked him to redo it/ fix the boxlock. He refused that. I get a lot of handmade items, but I have never ever had poor craftsmanship. Lol and looking for a discount ?? F that. What would I do with 100 bucks. Purchase a pizza or something. Hahaha. Yea ok.
@ 🤣🤣🤣🤣🫵🏽🫵🏽🫵🏽🫵🏽
@ I am playing the Big pun, “Laughing at you” song right now thinking of you!🤣🤣🤣🤣
That’s fake gold btw…
@@ChinggyBah why do you think that ?
No that should be fixed. End of story.
@jreviews5924 500. I'll fix it when I have free cash flow. Right now , the dollar is being devalued, so melt up in stocks and hard commanties. So when they drop the proce fo fix , do a lack of business. That's when I will. Gus has been the worst person to deal with.