Replacing a Troy Bilt Horse Engine Its Easier Than You Think
HTML-код
- Опубликовано: 12 сен 2024
- Replacing the old worn out Tecumseh engine on my 1979 4 speed Troy Bilt Horse Tiller. It's easier than you think. we're using a 212cc preditor engine from harbor freight tools.
Subscribe @TheRustyGarageandHomestead
youtube.com/@T...
/ @therustygarageandhome...
Contact me @
Contacttherustygarage@gmail.com
Troy bilt tiller
Rear tine tiller
best rear tine tiller
rear tine tillers
rear tine tiller reviews
best rear tine tillers
best rear tine tiller for large garden
Horse tiller
best garden tiller
#troybilt
#horsetiller
#preditor212cc
Thanks. So many of the other videos have a lot more disassembly involved. I followed yours and was able to get the reverse pulley bolt and main pulley off with just a little pressure using a pry bar. Saved a lot of time. Thanks for posting.
Thank you Rob for watching
Awesome job showing us everything.
Thank you.
I have my dads 1987 model. It has the Kohler 8.5 motor and still runs but you can no longer get parts for that motor. Last year it blew the spark plug out of the head. I helicoiled it and have it running again. The motor runs great but This may be my next fix for it.
Yes sir. There great machines. You can get most parts for these things except on the older engine sometimes it's difficult to find some parts. HFT has "super coupons" for these engines a few times a year. Hard to beat them for the price. These old tillers where made well and made to work.
@@TheRustyGarageandHomesteadKohlers all made in China today
except the only part I wanted to see - mounting the new engine and pulleys on the tiller frame. Oh well.
I applaude you for dropping that engine, without actually dropping it❤
Thanks you Peter.
Good job that will gettor done👍
Thank you Todd
Excellent presentation, thanks for sharing it.
Thanks for watching and commenting Jimmy
Thanks for the instructive video.
Took an hour to drive to HF to get the motor and only 2 hours to get it installed and running.
Didn't have an issue with the oil sensor.
This new motor is quite a bit lighter than the old cast iron 7hp unit so a bit less traction but it starts and runs fine so far.
Awesome that's great to hear. Glad the video helped. Thanks for stopping by
You sure made it look easy brother!!!
Thank you. And thanks for watching
I replaced the Briggs with a Honda 200 GX a few years ago. I left my low oil sensor plugged in. Just over fill it with Just a little oil. These engines are lighter than the original. I’m thinking about getting a steel plate weighing about 20 lbs. drill some holes and mounting it to the bottom of the engine. Should match the original in weight. Next time around I may try the predator engines.
That's not a bad idea. so far this thing has worked flawless. I figured I couldn't beat the price of the predator engine. So far its paying off. Time will Tell how good it does.
My Dad bought a Horse with the Techumse engine back on the early 1970's and that engine is still running like new. If I bought a Horse tiller with one on I would rebuild it rather than replace it because the balance it provides when using the tiller is the best package Troy Built offered. I have a Horse with the better Kohler engine and that package is not nearly as easy to use. The only way I would replace one of Troybuilts engines is with the Kohler diesel engine. Close to the same height setting as the original, but slightly heavier but can run all day long on very little fuel and till full delth with no problem with all that tourqe.
@@michaelbarrett1914 I just got one of these tillers a few days ago. Barn find for free. Still has the original 6 HP Tecumseh engine. All it needed was a new head gasket, a little tinkering with the original carb, new oil and Bob's your uncle. Works like new.
Carbs on the old engines werent the best but worked great until those didn't emptying the fule or adding stabil or sea foam. Whats the engine replacement. Mines a ood horse that uhsup had in irange color with 8hp briggs updraft carb
Hey thanks for watching. The engine I installed was a 6.5hp preditor from harbor freight. The factory engine was a 8hp tecumseh
i like it buddy. got 2 of them myself.
Thank for watching. There great machines
Catch up. My wife thinks I have three.
I left one at a friends house
Didn't all old Horse models come with a 8hp engine? If so why replace it with a 6.5hp engine? There are several videos of people using the same replacement you did, but I don't get the replacing with a smaller engine. It's something I need to figure out because I will be doing it before next spring. I have been looking at the 8hp Predator, but should I be looking at the 6.5?
Hey thanks for watching. The answer is no they all didn't have an 8hp engine. Some did. Mine came factory with a 6hp tecumseh engine. Here is a link you can look up the horse model tiller serial #'s and it will tell you what year they changed stuff. Hope this helps.
acrobat.adobe.com/id/urn:aaid:sc:VA6C2:e542543d-4b42-43b8-ab58-a4b218862c4b
I am at that cross road as well..Mine has an 8hp kohler . The 8 hp Predator shaft is thicker and will be an issue. They don't show the mount pattern for the 8. The 6.5 seems to power it well, isa there a difference in modern performance? Torque?
Hey thanks for watching. I'm not sure. The 6.5 hp predator has been great. No issue with it being underpowered. Mine also came factory with a 6hp tecumseh engine though. It wouldn't scare me one but to take the old one off and install the 6.5 predator. That option is still alot cheaper than an new tiller.
What was wrong with your stock engine? I would have just repaired it.
I still have it. One day I'll do a full restore on the tiller. I need it working more than look pretty right now.
Guy I got the tiller from jacked up the governor shaft.
Use a full screen, that little sliver you can't see anything
Thanks for watching. I will be mindful in the future about that. I was trying out a different recording option.
Were did you get the tines
The Tines I ordered off of amazon. I believe when I replace them again I will go with the OEM Tines. these tines work fine but the fitment wasn't the best. Thanks for watching
Did the same swap, but mine aint working right. Every time i put it in reverse, the bolt holding the reverse disc tightens up and stops the motor. Any ideas?
Hey Jim, Hmm that does seem odd. Sounds like somthing isn't turning freely. I would take that fully off and see what it's like spinning the reverse by hand.
No helpful. Did not show how to install. Just magical installed itself
Thanks for watching