NESPRESSO O-ring | Step by step guide to change and prevent leaking
HTML-код
- Опубликовано: 1 окт 2024
- Hello guys
In This video I will show you how to resolve one of the most common problems with Nespresso machine leakage. It is necessary to change an O-ring which to be honest is not so easy to do. Therefore I decide to share with you the guide to do it. Enjoy!
Subscribe to my channel : @benassy69
Manufacturer: How overly complicated do you want disassembling your machine to be?
Nespresso: Yes
:)))
Exactly what I thought, I had a Tassimo before, and disassembly was a breeze
There are two o-rings. This one behind the pod, the dimensions for this o-ring is 31.5mm (inside diameter) x 3mm. There is another tiny o-ring inside the boiler unit. The plastic and metal parts can be separated by twisting clockwise (it requires some force). Inside is a black cone with a small o-ring on top. The dimensions of this one is 5mm (inside diameter) x 2mm.
Hi Ben. I know I had encountered a couple of times this issue with the small oring behind the boiler. I noticed that if the small oring is the issue is usually water present in the pump chamber and a lot of limescale on the external wall of the boiler. The big problem is that the boiler is extremely hard to remove from the plastic housing in order to have access to the oring and change it.
Yes exactly. I actually found the plastic on mine quite easy to remove, it was like a bayonet lightbulb fixing. I just griped the boiler with gloves and gave a little twist clockwise. It was about the only easy thing on this bloody job so far! I hate it when manufacturers just clip stuff together like this. Thanks for your videos though, they were very helpful in my moment of need!
Hi Ben, which one should be replaced if the water is coming out where the used pods fall? In stead of coming out the spout?
@@elineweg2452 Hi Eline, I'm not sure I understand where the water is coming out? For me the water was leaking between the plastic and the boiler. I tried replacing o-rings and that didn't work. I ended up replacing the whole boiler unit (which cost about £27). Finally, this fixed it for me. This has been the most painful repair I have ever done!
@@oldskoolflash1 Ohhh okay then it is a different issue. With me the water falls into that black container that collects the pods afterwards.
Hello Adrian.
Really great video. Can you please advise what size oring you used? Is it std nitrile or silicone....thanks
Where did you purchase your parts from? I am looking for a CITIZ auto primer…
Hello Adrian! Where can i find a replacement O-ring from inside the brewing mecanism of a Citiz & Milk?? Thanks!
saudações brasileiras ao mestre........muito obrigado pela aula de desmontagem e troca da velha peça..............agora vou recuperar minha caeteira, a partir de agora acompanho seu canal sempre ....abraços
Bom dia obrigada pelo vídeo foi o único q achei ensinando a montar parabéns, eu tava tendo dificuldades pra montar aqui um desses e vc ensina muito bem,mesmo com as legendas é muito bem explicado obrigado, vc ganhou mais 1 escrito em seu canal
Minha cafeteira esta co vazamento. Será que se trocar a borracha de vedação, como mostra o vídeo, o defeito acaba?
Thanks for sharing your knowledge - it's awesome to have someone repair things and not throw them away. Your videos are so easy to follow. Thank you
Thank you, your video was very helpful, I have to do exactly the same with my Nesspresso.
Hi, I followed and replaced the o-ring, thanks for the video. Now I have a blinking light that doesn't go away. I know about the descaling mode, but holding the two buttons doesn't do anything, I tried 3 seconds, 5 seconds, 10 seconds, nothing works. At some point the water start coming out like in descaling mode but just continued forever I had to refill the tank. Then I just unplugged it because it wouldn't stop. Now it's back to this blinking lights and I can't use the machine. Maybe you have any ideas?
Hello Adrian. After I watched your videos a few times I disassembled my Nespresso machine and want to get the Orings ordered... Thanks for the video. The only thing I feel weird about your videos is that the camera is in front and on top of you and this causes the image to be inverted. I felt a bit confused when I was holding the plastic parts and watching the video to disassemble. Please see if it will be possible to put the camera behind you and maybe it will be easier... Anyway, just a comment. Your videos are very nice.
Thanks Adrian for your tutorial.
I dismantled according to your video. The O ring seems perfect. I connect all parts but still a leakage. There is another O ring to be replaced ? Tks
Muito bom trabalho consegui arranjar a minha máquina graças à sua boa e profissional explicação...muito obrigado. Bom trabalho.
Finally a decent video of reassembly! Thank you so much!
@benassy69 Adrian, many thanks for it. I am going to repair it. What is the dimension of the O-ring? I would like to by it in advance? Thx.
ruclips.net/video/YS1Y6O7pZmQ/видео.htmlsi=Zky5D-XNvxF0MAsK
Ha faltado mostrar el fallo antes del desmontaje y posteriormente enseñar después del cambio de la junta tórica
Thanks from Brazil my friend!
Learned quite alot with you.
Great job!
Best regards!
There is a spare part left. who knows where it should be put?a simple plastic black part about 50mm.
Amazing. Now I will try to do all of this with my coffee machine. Thanks.
hola, magnifico video. puedes pasar enlace para comprar la junta de goma?
Between "5:50 and 5:59" Is not so easy like you show...// Mast be another think to do...; don't open...
Thanks for the magnificent video. I had already disassembled the coffee maker on a previous occasion (it has been so long ago that I no longer remember the fault although I was able to fix it) But this time, due to a water leak, I was not able to get to the problem until I found your video, detailed and efficient. The pity is that it still leaks slightly after changing the O-ring. I have already read in the comments that there is another small O-ring on the boiler. Now I don't know if I'll try it again. The truth is that I don't use it much. The repair was rather a challenge. Thank you anyway.
I write from Spain with the help of Google Translate. I'm sorry if there are errors.
Thanks Adrian for the tutorials. I have an Esenza Mini. When I insert the capsule and turn on the machine, the hot water comes out of the opening of the capsule. It should be noted that the front part with the holes is clean. Any idea what the problem is?
I solved the water problem myself of my Le cube machine thanks to your video.
Its an old machine but good quality,,the next problem is now,,one of the buttom doesn t work but light is still working
How can repair (the water problem)
Thank you!!! 🎉🎉🎉🎉 perfect explanation !!
Good video but we gave up as the corrugated plastic was just impossible to separate!
My Nespresso is old, but still works and just leaks. Your videos have prevented it from being landfill.
I'd rather just buy a new machine...
Grazie per il video, assolutamente di aiuto, sei veramente bravo, buon lavoro.
Adrian, where can I buy the o-rings? I can't find a supplier. Maybe Ali-Express?
eBay.com
What is John Turek's number?
The size of the original o-ring please... Inside, diameter, if you can. 31.5mm (inside diameter) x 3mm it is good ? Thanks a lot
Hello. ~34 mm interior diameter. 3mm thickness.
@@benassy69 Thanks a lot
Mulțumesc for another great video, Adrian.
Beyond the O-ring, my Magimix machine has a flat metal ring, which appears to be broken. Can that also cause leakage? Can share pics if required.
That metal plat ring is purely decorative. The capsule make a tight seal on the flat surface on which the aluminium foil is placed. Make sure you use original pods aftermarket ones are leaking du e to lack of a silicone seal. Take a look on one of my Last videos where I explain this....
@@benassy69thanks, Adrian. I’ll ignore the metal ring and buy the O-ring and replace it. Hope it solves the leakage.
Great video. Couldn't have opened the machine without it. Thanks for posting!
Obrigado, ajudou muito seu vídeo 👏👏
Hello from Portugal and thanks for the excellent video, where can you buy the o rings? do you have measurements?
I live in Spain,and I don't find where I can buy this o rings too
Great video HOWEVER, o rings out of there are made of (often) unspecified materials that may not be safe for food contact. Silicone is typically the best choice but all I can find is either Nitrile or fluorocarbon rubber. Krups has done an amazing job in preventing repair shops or dyis to find small parts so I have no idea what material the original o-ring is made of.
Can you provide a link where I can buy the seal (EU)?
RUclips does not let me provide links în comments. Search for nespresso oring on ebay you will find a lot.
You know those very brittle clips you mentioned? ... Which part should I order if one of them snapped?
Thanks for a very good video, do you have a video for Krups nx250 o ring replacement?
I broke one of the brittle tabs. Is that game over?
If you still have one with a new good oring it is still workable.
Same here, considering supergluing it ;)
@@bamboos I broke one too, I think that maybe we should remove the gasket with pressing it and move it without touching the brittle tabs with a screwdriver cause they are veeeery sensitive
Hi Adrian, many thanks for the detailed repair procedure. Excellent work! What are the exact O-rind dimensions to purchase before attempting to repair? Internal diameter and thickness?
no mostraste si solucionó el problema, tengo entendido que las juntas tóricas típicas de fontanería no se adaptan bien al recambio original. el anillo interior es plano y no circular como la que haz colocado.
I just bought a new one from Nespresso and a fair bit of water winds up in the tray with each coffee. The recycling company has already picked up the cardboard box and packing material so it would be a pain to ship it anywhere but this seems quite annoying to replace the O rings myself. Thanks for the video though.
Buongiorno! Grazie per il tutorial, io ho comprato le guarnizioni di ricambio su Ebay, già che c'ero le ho cambiate tutte e con poco più di 5€ ho risolto tutti i problemi
Vous avez trouvé où le joint
No wonder things like this get sent to landfill when so complex to repair?
Surely, long life o- rings are not beyond present day technology?
Is this a case of built-in obsolescence to force us to keep buying new machines?
Or am I just a cynic?
I tend to agree with you. For me now is a piece o cake to open and repair but for a new comer is definitely a hustle.
Absolutly this is the trick of this bussines! Constraction with obselozenz!
Hey! Love that you uploaded this video. I followed it exactly and everything worked exactly as you showed and I replaced the o-ring. But it leaks more now than it did before, this time a new leak from the water tank junction. What might have happened for me to mess this up? It didn't leak from there before!
Hi. You might have positioned the water tank sear faulty or a joint is not correctly set. Try reposition it correctly
@@benassy69 can you post a picture of rust it's supposed to look like? I'm worried I might be missing a part
No 17:28 minuto q vc amostra a parte encaixada ,no meu aqui não tá encaixando fica uma pequena brexa entre as partes já apertei ,soltei várias vezes e seguindo seu vídeo mesmo assim fica essa brexa ,quando eu desmontei não tinha reparado se tinha já essa brexa ali
What is the size of the o ring, and where can I buy it? Thanks
I have a video on my channel addressing exactly this 2 questions!
Thanks a lot for this very helpful tutorial. Lots of weird plastic sounds. But at the end, this evil machine works like a charm now. Cheers m8!
Where to buy the big o ring ? The one in the exit of the brewing head?
Hi check out my last video on my channel. I am addressing this exact topic.
Merci pour votre explication qui m'aide plus de résoudre ce type de problème.
What are you guys using to wash the parts? I submerged everything in warm water with dishwasher detergent and brushed with an old toothbrush but still some areas are dirty. How about vinegar? Anyone tried it? Thanks!
Excellent video mate. Thanks.
I just finished to clean my coffee machine, thank you so much for this video!
bravooooooooooooooooooooooooo
Back pressure due to gunked up outlet surround channels will be the issue....
Bonjour le joint ou je peux le trouver sur le net j'ai trouvé 42mm celui-là il fait 37mm je trouve pas
Mine (same as your model) has a low caudal of water. It does not look like is spilling out water. Just a weak stream. I tried to clean the capsule hole with a toothbrush and apparently got a little better but still not right. How could I fix it?
That was very insightful. I've repaired my machine, using your instructions, thanks you
Dans tous ces commentaires, j'ai trouvé les réponses suivantes pour le diamètre du grand O'ring : 32-38, 31,5-37,5; 31-37; 34-40 !!!!! Quelle est la bonne dimension intérieure ?
38-32-5
Thanks Mr.Adrian. I got this machine one week ago. Now i know how to DISASSEMBLY the machine. Thanks to you..
Hi, if you break one of the clips holding the o ring what can you do? Any ideas?
I have broken the two clips... Can it be fixed or I just have to buy a new machine?
Oh and I should explain that I started using knock-off pods for about 6 months before this problem happened. Guess I should have stuck to original Nespresso pods
Consegui salvar mais uma maquina graças a sua ajuda, muito bom seu video. Muito obrigado
Adrian, a Big thanks for your video 👍👏👏🇬🇧
Does anyone know where to find a tutorial for same problem for the Nespresso Essenza Mini
hi thanks for the vid i replace the O ring 31/37/3 and i have still the same leak any idee ?
Thanks for this, took my own machine apart last night and (hopefully) have the correct size of O-Ring arriving today from Amazon! That was one hell of a job to disassemble - I'd never have been able to manage it without your easy-paced video!
I can't quite believe it, but it worked! First set of o-rings I got from Amazon were obviously too thin, so got the right one off ebay. One point I found tricky was putting the nozzle bit back onto the springs - I thought I had it on, but it wouldn't compress and I took it off and did it again .... apart from that, re-assembly is quite simple. Thanks again!
can you please share the ebay link or the dimensions of the ring? Thank you!@@hardwaresecuritymodule
@cristinademeo2727 I have a video on my channel addresing exactly this.
Very very informative video, all the trick and tip explain in every steps, good job!, subscribed!
Hi Adrian bought some types of seals from china and world fluids, I was wondering what type of piston o ring you use?
O vídeo muito explicativo.
Muito bom, me ajudou muito 👍
merci
Thank you. You do not show how to replace the reservoir o ring gasket that the water tank hooks into.
Bravo Adrian. Un video explicit pentru tot mapamondul. Respect
Where did you find the correct O ring which is actually shaped as a D ring? Having trouble finding this.
Me too
Please can you tell me if there is a component that the nylon pin with the small spring fits into? Does it just fit into the star shaped aperture in the heater unit or is there a piece that I am missing?
Hopefully not!
Hi, My Magimix Nespresso machine is stuck in descale mode. I have tried all recommended reset options and spoken to Nespresso. Any suggestions on a fix before I scrap it please
he must be Nespresso Co. as engineer worker? /? very interesting to see how he can fix the difficult machine
mine lick only for 20 seconds after the erogation. is that the case?
Thanks you saved my machine!!
Was going to buy a new machine and this video saved me 70€.
Replacement o-ring= 0.25€ and 1hour of pure joy.
All the best for you!
Glad it was usefull!
Ohh great,but I don't know where can I buy this o ring. I live in Spain
@@javidiaz6272 any drug store should have it (tools shop)
Ebay. com sear h for "Nespresso O-ring"
Dear Adrian, thank you for all your excellent videos. Ik want to know WHERE you can buy the O-rings for the nespresso machines (stop leaking), thank you Edward (netherlands)
Hello Edward, thank you. In some countries you can find it on Amazon but to be sure you can find it on ebay. Search for Nespresso oring on ebay sould be a 38 mm oring.
Excellent tutorial my friend.
Thnaks a lot !
Theo best tutorial, ever. Tks.
Hi, Thanks for the video, i managed to follow the instructions but the O ring was in great condition. We then tried the machine without the trays in place and surprisingly all was good. The leak happens when pulling the handle to discard the old pod, that's when a ton of water comes out (well, about 10 or 15 mls). Any idea on the issue, maybe as we are not using proper nespresso pods, we are using compostable?
It is normal to have residual water in the pot chamber. If you don't have any leaks during the brewing process than it is not a problem with the machine. Could be from the pods itself.
Very nice explained video. Thank you
Where are you located?
Merci, grâce à vos instructions, j'ai reussi en quelques minutes à ouvrir la machine.
C'est vrai qu'il ne faut pas hésiter à forcer un peu, ça ne casse pas.
Bonjour, vous avez trouvé le joint en question ? Pouvez-vous me donner le lien, s'il vous plait. Merci par avance. 😊
@@cptraskobonjour, j'avais mis un joint torique trouvé dans un magasin de bricolage.
Very detailed, clear and professional! Thank you!
where can I buy de O-ring?
Would be helpful to give the size etc. on the O ring(s) so we can try to find them. Also Metric or Inch
Sir, I have a blockage in the heating chamber, is there a solution please? Thank you
Yes. Try to inject vinegar inside and let the reaction clean the limescale.
thank you so much bro 👍
After following your video to replace the o ring my machine won't stop flashing the lights I can't do anything. Any idea on what's wrong? Was working fine before
Take a look if you fitted the buttons correctly. Sounds like a always pushed button.
Quanti anni aveva la macchina?
Grazie
Prego
Thanks for sharing, it helped me a lot!
Thank you man